KZhead
Тәжірибелік нұсқаулар және стиль

Making a Maker's Mark: LaserPecker 3, Configure and Create!

The Art of Craftsmanship
2023 ж. 15 Қаз.
5 227 Рет қаралды
Жүктеу

Interested in purchasing a LaserPecker product? Follow the link below and use Coupon Code: TAOC50, to get $50 discount for orders over $800
www.laserpecker.net/products/...
You can also use this affiliate link to support us through your purchase on Amazon...
Amazon US: amz.run/6o2U
Today in the shop we set up and review the LaserPecker 3, an infrared engraving machine for metal, plastic, and leather. This machine is super easy to set up and use, being very "plug and play" with the free app and simple soft ware. On the first try, I was able to engrave cleanly on different types of metal and leather, and after getting the settings dialed in, etched The Art of Craftsmanship runes logo on all of the Sheep Shear knives from the batch that I just finished.
From what I have experienced so far, I cannot speak more highly about the ease of usability, versatility, and customizability of the LaserPecker 3 for small engraving jobs.
Follow us on Instagram @theartofcraftsmanship and @theartofcameraguy to see what’s happening in the shop on a daily basis, join in with the live streams, and catch sneak peeks of our up coming videos.
If you would like to purchase AOC merchandise, you can find us on Tee Spring here...
the-art-of-craftsmanship-3.cr...
To those of you who feel like you got something special from our videos and want to know how you can support us further, check out our Patreon page here... / theartofcraftsmanship

Пікірлер

  • Good timing, I just got mine and I’ll be doing a similar video so thanks for the intro. 👍. Great to see you at MakerCamp!

    @TyrellKnifeworks@TyrellKnifeworks6 ай бұрын

  • Great video, mines just arrived, excited to use!

    @user-dx8fb9qe7j@user-dx8fb9qe7j2 ай бұрын

  • Mine is on the way. I can't wait to start engraving. Just as an aside, if you want to engrave wood, you are better off with a diode laser. I also have an AtomStack X20 Pro 20W laser that I use for my wood projects. It will also etch steel, but it takes a very long time (we're talking HOURS depending on the steel and/or coating) to get a deep etch of my logo in steel.

    @miamivice966@miamivice9666 ай бұрын

    • Haha! 😂 I have the exact same setup... LP3 and an Atomstack X20 Pro! Im just beginning though. Just starting to scratch the surfave of what I can do.

      @michaeltrone616@michaeltrone616Ай бұрын

  • That thing is very cool! And within a week, everything in Dustin's house is engraved.

    @jimtaylor6663@jimtaylor66636 ай бұрын

  • Awesome logo...

    @donscottvansandt4139@donscottvansandt41395 ай бұрын

  • Thanks for the review

    @zachhensel8505@zachhensel85053 ай бұрын

  • Hi Dustin. Your new toy is great! Enjoy it! A big hug brother

    @Miguel_ON65@Miguel_ON657 ай бұрын

    • Thanks Miguel.

      @TheArtofCraftsmanship@TheArtofCraftsmanship7 ай бұрын

  • Thanks Dustin, the video is great!🤩

    @LaserPecker@LaserPecker6 ай бұрын

    • Thank you.

      @TheArtofCraftsmanship@TheArtofCraftsmanship6 ай бұрын

  • Awesome 👍

    @donwatson5699@donwatson56996 ай бұрын

  • Looks like I’ll have to get one now

    @73FORGE@73FORGE6 ай бұрын

  • Great video as always 👏👏

    @MASI_forging@MASI_forging6 ай бұрын

  • Oh Dustin, where have you been for three months man? I was worried if you are ok at all..🙋 Greetings from Serbia

    @radnazona3979@radnazona39797 ай бұрын

    • Thanks for your concern. We’ve been busy with life, including Devon getting ready for his new baby boy.

      @TheArtofCraftsmanship@TheArtofCraftsmanship7 ай бұрын

  • What settings did you use on leather?

    @kevinlipka4336@kevinlipka43362 ай бұрын

  • How deep is it burning in? 3 thow?

    @mrsensable@mrsensable6 күн бұрын

  • Do you have a vid on how you made that knife it’s beautiful

    @Baldmanblades@Baldmanblades6 ай бұрын

    • Which one? I have a video on the knife from the thumbnail as well as one about making the sheep shear knives.

      @TheArtofCraftsmanship@TheArtofCraftsmanship6 ай бұрын

  • did you try getting the wood a little wet prior to using the laser? I have seen others do that for both wood and leather and get results

    @uniballoutlaw@uniballoutlaw7 ай бұрын

    • I didn’t, but thanks for the suggestion. I’ll try that.

      @TheArtofCraftsmanship@TheArtofCraftsmanship7 ай бұрын

  • I purchased a laserpecker 3 nine months ago and it will not connect to bluetooth. When i turn on the laser it flashed a blue LED for about 10 seconds and then red and blue LED lights start flashing ad will not connect to any of my devices and have even tried plugging it in directly to usb and still not connection. Support for this product has been a nightmare. CAN ANY ONE HELP ME WITH THIS PROBLEM?

    @jasonhunt3391@jasonhunt33915 ай бұрын

  • I would love to have one, but the cost is out of my budget, for now anyway. Thanks.

    @tonyn3123@tonyn31237 ай бұрын

  • Congratulations!!! Could it be possible to etch a QR?

    @user-gh3wt2uf2p@user-gh3wt2uf2p7 ай бұрын

    • Absolutely!

      @TheArtofCraftsmanship@TheArtofCraftsmanship7 ай бұрын

    • @@TheArtofCraftsmanship Maybe you could add one to your site, Instagram or whatever. Cheers...

      @user-gh3wt2uf2p@user-gh3wt2uf2p7 ай бұрын

    • That's awesome! Your knifes deserve to have a maker's mark!

      @russellcharles7839@russellcharles78397 ай бұрын

  • This was amazing and about to solve my maker mark issues, until i saw the price...

    @FkRoP@FkRoP22 күн бұрын

  • Sorry about your phone screen.

    @thanatosor@thanatosor6 ай бұрын

    • That phone was on its way out any way. Thanks for watching.

      @TheArtofCraftsmanship@TheArtofCraftsmanship6 ай бұрын

  • The laser is cool... but AOC 2023 on a blade is ironically political

    @scottskaperen@scottskaperen6 ай бұрын

    • Lol. 🤷🏼‍♂️

      @TheArtofCraftsmanship@TheArtofCraftsmanship6 ай бұрын
KZhead