Simrad NSS EVO3 Basics
2024 ж. 19 Мам.
18 404 Рет қаралды
Tuning sounders can seem difficult but it's not, so here are a few tips from me.
I discuss my basic Smirad EVO 3 16 setup, what is good about the Simrad, and my thoughts on how other units stack up.
If in doubt just do a reset, keeping the system mainly in auto mode generally gives you the best results.
www.simrad-yachting.com/en-au...
Great video, thank you for your explanation on settings, learnt something from this 👍🏽
Glad it was helpful!
Hi. Evo3S and TM275LHW: Which colour port at rear for the HF? Which colour port at rear for the LF? Cameron
Hey mate, love the vid. Any recommendations for finding Westernport Snapper using an Evo3 w/ a P-66 Transducer on 50khz?
Same tuning applies. Keep it all bog stock and just adjust the gain. At night take it right down as the water gets filthy and filled with crap.
Hi. I have just received my new boat with 2 x 9” EVO 3S MFDs networked via NMEA 2K. I have the 3/1 Ducer and TM275LHW Ducer installed. My plan is to eventually head out offshore, but for now just learning how to use the setup in PPB. What chirp range is best for PPB with the 275 Ducer? How to ensure I have defined properly both ducers on the networked setup? I have horizontal lines showing up on the MFD for the 275 Ducer screen when at rest but ok when underway. Possible causes of this? Cameron
Hey mate watched ur vid good info my nss12 seems to not be leaving a track I most likely messed with a setting how can I fix it cheers