Take an in-depth look at HISUN's advanced manufacturing facility.
Пікірлер
I own a 2016 Hisun Sector 750. It has a 5-year drive train warranty (special offer at the time) and is an excellent machine with plenty of power that can go up or down a cow's face. The Sector 750 is wider than 50" and side hills extremely well. It's top speed is about 40 mph. The Sector came standard with a 3500 lb winch, full/half windshield, cab top, doors, differential lock, adjustable gas shocks and fancy aluminum wheels. I have since bought a 6' snow plow, rag top and installed a heater in it. It plows snow like a demon here in Idaho. The Hisun Sector steers easily when traveling in two-wheel drive, but in four-wheel drive with both differentials locked the steering can be stiff. So, if you're an old man I would suggest buying it with the factory installed power steering. Solid machine for the $9,000 I paid on the showroom floor. Finally, Hisun manufactures other name brands like Coleman Outfitter and Gators...
@charlieswearingen5006 жыл бұрын
This is all nice but where do I get a parts list for my 196 cc engine that came on the Coleman CT200U mini bike? This engine came with a 5/8'' output shaft and I would like to buy the parts to convert it to 3/4'' output shaft. If they are so huge you would think this would be easily found on line.
@Deucealive757 жыл бұрын
Deucealive75 I'm Not sure if what your asking is possible without internals being changed, maybe visit a machinist.
@dodgeramsport017 жыл бұрын
Sounds like you need a engine with a 3/4 output shaft
@ridered72623 жыл бұрын
@@ridered7262 I found out quickly after this post that it's easy to get a 3/4" shaft. Standard Honda clone crankshaft is a direct swap.
@Deucealive753 жыл бұрын
Okay I'm always a Honda fan Kawasaki Yamaha Polaris Suzuki. What makes you stand out from the rest of the competition? Reliability availability of parts? Do you stand by your product? Give me your best sales pitch
@gabeslawncare91046 жыл бұрын
No sells pitch no reliability just junk
@charlesthompson89623 жыл бұрын
I'm a mechanic at a shop where we service hisun iv seen way to many major engine failures on same as new Utvs from clutchs going out to overheating and ruining the engine
@charlesthompson89623 жыл бұрын
Take a Honda any day
@charlesthompson89623 жыл бұрын
I will admit most of the major problems have been with the hisun 750 if you are having good luck with yours I'm happy for you but I'd still take a honda
@charlesthompson89623 жыл бұрын
@Puu Pää yes sir a couple of them never even made it through the break in period
@charlesthompson89623 жыл бұрын
Добрый день. Сделайте обзор на Хайсан 300. Спасибо!))
@user-mo9uo6pj2y3 жыл бұрын
👍👍👍🇧🇷
@jzbastos4 жыл бұрын
Imagine what Chinese fighter jets are like if they can't build a decent utv or atv
@ghost-rider5102 жыл бұрын
Decent..? There decent… there not winning yet… but there decent.
@Synic0810 ай бұрын
2017 hisun sector 550 where is the crank sensor located?
@TheLifted994 жыл бұрын
How is sector 550?
@user-op6of7cv5e3 жыл бұрын
Timing
@michaelhorne33843 жыл бұрын
quiero piezas estoy en mexico
@luisignaciomunozazamar23123 жыл бұрын
Didn’t know who manufactured Massimo (one of many Hisun brands) when purchased. 33 miles and the clutch fried; wore to the metal. Have to replace it. About a 7 hour and $400 job if you do it yourself! Clutch housing marred also. Simple use, nothing aggressive. No excuse just poor quality!!!
@huspwr4 жыл бұрын
Amen
@charlesthompson89623 жыл бұрын
everything. is made in china a those day...
@jaimelopez6802 жыл бұрын
Well at least they got to be better than polaris. polaris only warranty their garbage for 3 months! About the life span of one!
@rogersopkowiak30504 жыл бұрын
No Polaris is definitely better
@charlesthompson89623 жыл бұрын
You are comparing apples to oranges, Hisun is not even close to a Polaris.
@ridered72623 жыл бұрын
polaris many parts are china parts...as kymco k)awsaki Y)amaha- M)otor C)ompany K-Y-M-C-O
@jaimelopez6802 жыл бұрын
@@jaimelopez680 what the fuck are you saying
@magnumllama4002 жыл бұрын
@@jaimelopez680 Didn't know that Jaime. Thanks
@MrPauldouglas2 жыл бұрын
It's rad your using my video haha
@PlanBrewski3 жыл бұрын
How do people know this had add isn't just one big lie ?
@houndjordan507 жыл бұрын
Has anyone actually seen there production facility that they are describeing in the video?
@houndjordan507 жыл бұрын
houndjordan50 How do we know that Honda, Yamaha, Kawasaki, etc. isn't just one big lie.
@dodgeramsport017 жыл бұрын
houndjordan50 No but I never seen the grand canyon either.
@dodgeramsport017 жыл бұрын
brasil spor ronaldo
@faikgunes69483 жыл бұрын
I hope they put the hurt on the over priced polaris and Hondas their side by sides are ridiculously over priced.
@catfish242 жыл бұрын
Nine case , took 3 months and a threat to stop paying on it to get cc powersports in clarksville Indiana and yamaha to fix it .presently have a 2021 550 hisun and so far it's doing great .plenty of power and all around good side by side .
@kenbeeler57812 жыл бұрын
China???? I'm out!!
@bryanolivo80935 жыл бұрын
Good luck.
@PlanBrewski3 жыл бұрын
It would be nice if you stand behind the junk you make for warranty or parts but you don’t. Horrible company.
I own a 2016 Hisun Sector 750. It has a 5-year drive train warranty (special offer at the time) and is an excellent machine with plenty of power that can go up or down a cow's face. The Sector 750 is wider than 50" and side hills extremely well. It's top speed is about 40 mph. The Sector came standard with a 3500 lb winch, full/half windshield, cab top, doors, differential lock, adjustable gas shocks and fancy aluminum wheels. I have since bought a 6' snow plow, rag top and installed a heater in it. It plows snow like a demon here in Idaho. The Hisun Sector steers easily when traveling in two-wheel drive, but in four-wheel drive with both differentials locked the steering can be stiff. So, if you're an old man I would suggest buying it with the factory installed power steering. Solid machine for the $9,000 I paid on the showroom floor. Finally, Hisun manufactures other name brands like Coleman Outfitter and Gators...
This is all nice but where do I get a parts list for my 196 cc engine that came on the Coleman CT200U mini bike? This engine came with a 5/8'' output shaft and I would like to buy the parts to convert it to 3/4'' output shaft. If they are so huge you would think this would be easily found on line.
Deucealive75 I'm Not sure if what your asking is possible without internals being changed, maybe visit a machinist.
Sounds like you need a engine with a 3/4 output shaft
@@ridered7262 I found out quickly after this post that it's easy to get a 3/4" shaft. Standard Honda clone crankshaft is a direct swap.
Okay I'm always a Honda fan Kawasaki Yamaha Polaris Suzuki. What makes you stand out from the rest of the competition? Reliability availability of parts? Do you stand by your product? Give me your best sales pitch
No sells pitch no reliability just junk
I'm a mechanic at a shop where we service hisun iv seen way to many major engine failures on same as new Utvs from clutchs going out to overheating and ruining the engine
Take a Honda any day
I will admit most of the major problems have been with the hisun 750 if you are having good luck with yours I'm happy for you but I'd still take a honda
@Puu Pää yes sir a couple of them never even made it through the break in period
Добрый день. Сделайте обзор на Хайсан 300. Спасибо!))
👍👍👍🇧🇷
Imagine what Chinese fighter jets are like if they can't build a decent utv or atv
Decent..? There decent… there not winning yet… but there decent.
2017 hisun sector 550 where is the crank sensor located?
How is sector 550?
Timing
quiero piezas estoy en mexico
Didn’t know who manufactured Massimo (one of many Hisun brands) when purchased. 33 miles and the clutch fried; wore to the metal. Have to replace it. About a 7 hour and $400 job if you do it yourself! Clutch housing marred also. Simple use, nothing aggressive. No excuse just poor quality!!!
Amen
everything. is made in china a those day...
Well at least they got to be better than polaris. polaris only warranty their garbage for 3 months! About the life span of one!
No Polaris is definitely better
You are comparing apples to oranges, Hisun is not even close to a Polaris.
polaris many parts are china parts...as kymco k)awsaki Y)amaha- M)otor C)ompany K-Y-M-C-O
@@jaimelopez680 what the fuck are you saying
@@jaimelopez680 Didn't know that Jaime. Thanks
It's rad your using my video haha
How do people know this had add isn't just one big lie ?
Has anyone actually seen there production facility that they are describeing in the video?
houndjordan50 How do we know that Honda, Yamaha, Kawasaki, etc. isn't just one big lie.
houndjordan50 No but I never seen the grand canyon either.
brasil spor ronaldo
I hope they put the hurt on the over priced polaris and Hondas their side by sides are ridiculously over priced.
Nine case , took 3 months and a threat to stop paying on it to get cc powersports in clarksville Indiana and yamaha to fix it .presently have a 2021 550 hisun and so far it's doing great .plenty of power and all around good side by side .
China???? I'm out!!
Good luck.
It would be nice if you stand behind the junk you make for warranty or parts but you don’t. Horrible company.
quiero piezas estoy en mexico