KZhead
Ойын-сауық

Truck Repair, changing front wheal bearings,races, wheel seal, 794 2020/142

LongHaul Larry
2020 ж. 4 Қаз.
13 586 Рет қаралды
Жүктеу

Hi Guys, replacing bearings,races,wheel seal, and running the truck to the alignment shop
LongHaul Larry P.O. Box 92 St.Cloud, WI. 53079
Lhl820@yahoo.com
Thrive Supplements links:
inspectort.le-vel.com/
InspectorT20@gmail.com
www.lhlprint.com/product-page...
www.truckerology.com/

Пікірлер

  • You’re the Best Example I have seen of an Overqualified Truck Mechanic. 👍

    @kens.3729@kens.37293 жыл бұрын

  • Great Repair Video Larry. Have a good week and stay safe....

    @johndollahite655@johndollahite6553 жыл бұрын

    • Thanks

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Another great video by Larry

    @genefoust5569@genefoust55693 жыл бұрын

    • Thanks

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Great explanation on race removal/installation. Exactly how I do it.

    @troysalen1426@troysalen14263 жыл бұрын

    • 👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Welcome back Monday morning October 5th local time 9:03 a.m. temperature 50ﾟ year 2020NC

    @genefoust5569@genefoust55693 жыл бұрын

  • I enjoyed the class, thanks.................

    @williamsmith2804@williamsmith28043 жыл бұрын

    • 👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Great lesson and video....Thank YOU

    @jamesterrill1938@jamesterrill19383 жыл бұрын

    • 👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Hi, Larry you are really Gem of ADL.. God Bless you all the time.

    @pradeepvidhate@pradeepvidhate3 жыл бұрын

    • Thanks

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Wow Larry! 794 needed a lot of work! I'm sure you saved the boss a whole lot of money!

    @robertmosley6967@robertmosley69673 жыл бұрын

    • Every truck needs attention at some point

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Have a good day larry.

    @richorourke7872@richorourke78723 жыл бұрын

    • You too

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • 👍The Cone - GREAT IDEA!!! - I can't tell you how many times I've had trouble over tightening wheel bearings. Used to just keep spinning the hub until it "free spined" then checked side to side & in + out slap & hoped for the best.

    @jballard3253@jballard32533 жыл бұрын

    • Yep same here

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Nice work...

    @PakistaniTrucker@PakistaniTrucker3 жыл бұрын

    • Thanks

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • They make a bearing ,racers, sealer puller an installer kit for that type of work had to order one yesterday replacing my timing chain gasket, saw one for a Peterbuilt.

    @chuckychuck@chuckychuck3 жыл бұрын

    • Yep there is always special tools

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Good morning long hual Larry

    @cjtenner9655@cjtenner96553 жыл бұрын

    • 👋

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • I use a Hydraulic press never a problem. Plus with a pre-set bearing system you just need to torque the nut to the correct setting to get the correct clearance. You learn something new every day.

    @anthony1636@anthony16363 жыл бұрын

    • 👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • The Service manual for pre-set bearings on freightliner calls for 250 ft-lbs of torque and that's it. Thanks for sharing the video.

      @commandomkz6451@commandomkz64513 жыл бұрын

  • Sir Larry !! Saw some things that are questionable ,,but GOOD Job & Thanks !!! ""KEEP IT SAFE ""!!

    @KB-gs8zi@KB-gs8zi3 жыл бұрын

    • Everything is questionable 😁

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • @@LongHaulLarry YEPPER !!! Can't go for the ""NEW"" tech crap !!! ""OLD way always worked fine where I learnt at in the ""OL"" Mom/Pop Shop years ago !!!!

      @KB-gs8zi@KB-gs8zi3 жыл бұрын

  • GM LHL, as far as bearing races go, we freeze em, so they pop in lit' bit easier, stay well...peace

    @joedriver8771@joedriver87713 жыл бұрын

    • Done that myself 👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • Instablaster...

      @waltermarcel627@waltermarcel6272 жыл бұрын

  • Im a Journey man trailer mechanic run a weld bead on the inside of the races put the new races in a freezer so they shrink a bit the cold races will pound in way easier and the welded races will pound out a lot easier as well.

    @johnnegrey1327@johnnegrey1327 Жыл бұрын

  • I thought with the cone you didn’t have to back out but…just straight ft pounds of torque. 200!

    @sofistk8ddd1@sofistk8ddd1 Жыл бұрын

  • Our favorite grease monkey is racking up the videos recently! 👍🏼

    @CCscott@CCscott3 жыл бұрын

    • 😁

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Ah did you hurt your little thumb get the boss to kiss 😘 it lol 😂 ✌️

    @bossmantrucker656@bossmantrucker6563 жыл бұрын

    • get boss's wife or the inspector to kiss boo boo

      @PeterALoch@PeterALoch3 жыл бұрын

  • Great work sir 💐💐💐✌🏻 Gud one ,,, same here I m diesel mechanic from India Punjab

    @kabalsingh6823@kabalsingh68233 жыл бұрын

    • Hello to India

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • LongHaul Larry hello sir , how’s you

      @kabalsingh6823@kabalsingh68233 жыл бұрын

    • ❤️

      @kabalsingh6823@kabalsingh68233 жыл бұрын

  • You are the man

    @glackaglack1534@glackaglack15343 жыл бұрын

    • Thanks

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Hey Larry have a great day. 905am Monday October 5

    @OhioTravelswithKris@OhioTravelswithKris3 жыл бұрын

    • You too

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • @@LongHaulLarry I got a lot done today.. laundry and mowing the lawn

      @OhioTravelswithKris@OhioTravelswithKris3 жыл бұрын

  • One easy way to find a parasitic draw is with a temperature sensor pistol. Use it on the fuse box, warmest fuse is usually the culprit. Then trace out that circuit to the problem.

    @youtubeuniversity6892@youtubeuniversity68923 жыл бұрын

    • Good ide

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Air hammers work great for races also avoids smashing fingers lol

    @conman2696@conman26963 жыл бұрын

    • 😂👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Real nice👍👍👍

    @robertblevinsjr4531@robertblevinsjr45313 жыл бұрын

    • Thanks

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Unsafe hitting two cups together , the hard surfaces will splinter and chip ! Always wear safety glasses . Heat aluminum hub surfaces up to drive cups out and in place .

    @vicpetrishak7705@vicpetrishak77055 ай бұрын

    • You are right, sometimes I get ahead of myself Ànd safely gets forgotten 🫣

      @LongHaulLarry@LongHaulLarry5 ай бұрын

  • Water oil mixes together makes it soupy. Oil for rainbow color oil water. Grit in my oil from shavings engine repair or clear color.

    @curtismccorkel6985@curtismccorkel69853 жыл бұрын

    • 👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Check the alternator for draw. Had the same problem turned out to be the alternator.

    @eddiekilby@eddiekilby3 жыл бұрын

    • I did

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Morning Larry as a fellow gear head neat video sure seems like the boss should invest in a press lots of uses for it and when he orders the press he can order that T-680 headlight trim😁 1.3 draw doesn't the the Obama electronic log draw when off? also the computer should have a hot at all times pin.🤔

    @stovebolt448@stovebolt4483 жыл бұрын

    • Eld is off when I tested

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • @@LongHaulLarry Ok but does it still have a pin that is "Hot at all times"?like the computer.

      @stovebolt448@stovebolt4483 жыл бұрын

  • Nice video , Where can I find this socket? What size is it? Thanks

    @joecastillo8995@joecastillo89959 ай бұрын

  • The person who is reading this comment i wish you great success health love and happiness i am from morocco have a good life for everyone here God bless United States of America ^^💟🕇

    @remembergodisalwayswithyou6862@remembergodisalwayswithyou68623 жыл бұрын

    • Hello! Wishing you Health, Love & Happiness in Morocco. Thanks for Kind Wishes to USA. 🇺🇸👍

      @kens.3729@kens.37293 жыл бұрын

  • I like your videos I was just wondering do you ever get tired of doing all that hard work for lazy drivers why are they there helping you I did anyway extremely informative and entertaining

    @mikehamilton4357@mikehamilton43573 жыл бұрын

    • I’m trying to inform the drivers to do things to help them and less maintenance also

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • I want to get that fee tool and whack you with it lol 😂 ✌️

    @bossmantrucker656@bossmantrucker6563 жыл бұрын

    • Just wait when you need work done on Big Maroon😎

      @PeterALoch@PeterALoch3 жыл бұрын

  • The wheel hub looked lightweight.Is it aluminum or white metal.Years ago that was heavy.

    @normangallant9879@normangallant98793 жыл бұрын

    • Aluminum

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • 🙌🙌🙌

    @erwinrommel1682@erwinrommel16823 жыл бұрын

  • GR8T FixEmUp ...and Teaching Vid....you'll find the draw don't worry ....

    @rickt4552@rickt45523 жыл бұрын

    • Thanks

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Can’t really blame your boss for getting excited about getting some tools free once in awhile. He sure seems like he is always buying some tools for the shop/tractors and trailers plus all his other expenses.

    @anthonypirrello2473@anthonypirrello24733 жыл бұрын

    • Yep 👍

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Curious to how much and what kind of oil in Bearing hub..

    @jamesterrill1938@jamesterrill19383 жыл бұрын

    • These are 80-90, not much

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Hi Larry, can you give us the names of the tools you used and where to get them?

    @pedroleiter7959@pedroleiter79595 ай бұрын

    • If there is a special tool I usually do but I know I miss it sometimes. Get a bit busy sometimes

      @LongHaulLarry@LongHaulLarry5 ай бұрын

  • The boss is lucky he has you. Hope you can open your own shop. What does ADL stand for

    @dalesmith5222@dalesmith52223 жыл бұрын

    • Not sure

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • @Dale Smith All Day Long That is what ADL stand for

      @PeterALoch@PeterALoch3 жыл бұрын

  • Hey Larry, sorry you adjusted that wheel bearing incorrectly. With the preset bearing that sleeve sets the proper clearance. Should just torque the nut to 250 and place the lock ring in. That sleeve crushes to set proper clearance. Good luck.

    @waynefulton8012@waynefulton80123 жыл бұрын

    • Every type off wheel bearing is torqued differently on manufacture specs, I went off the company’s torque specs so all good

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • hydraulic press is good to have

    @stephan4ever64@stephan4ever643 жыл бұрын

    • Yep would have worked too

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • If that’s a ConMet system you are well under the minimum torque that they spec.

    @ko9446@ko94463 жыл бұрын

    • Nope

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

    • LongHaul Larry nope as it’s not a ConMet or the torque is too light? I do ConMets daily, they are at 300ft lbs as per their instructions

      @ko9446@ko94463 жыл бұрын

    • @@ko9446 and no backing either right?

      @boricuany79@boricuany793 жыл бұрын

    • Emilio Clas according to their instructions, no.

      @ko9446@ko94463 жыл бұрын

    • @@ko9446 yeah that's what I thought. Thanks

      @boricuany79@boricuany793 жыл бұрын

  • You need some light looks rather dark

    @hubertbruun1273@hubertbruun12733 жыл бұрын

    • Need night vision

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Hey

    @erniecougill4278@erniecougill42783 жыл бұрын

    • 👋

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Why wouldn’t u apply Greece like A car and pack it.

    @richorourke7872@richorourke78723 жыл бұрын

    • Because it's a country.

      @ZeZeBatata69@ZeZeBatata693 жыл бұрын

    • it's a oil bath...lubed by gear oil instead of grease : )

      @banzaii6285@banzaii62853 жыл бұрын

    • Oil hub

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • Maybe the black pony should be your's and give Big Blue a little rest. I'm sure Johnny Chicken wouldn't mind, especially if you put those train horns on it.

    @nicholasvanorton7840@nicholasvanorton78403 жыл бұрын

    • Oh boy, trying to get rid of big blue? Don’t say that out loud

      @LongHaulLarry@LongHaulLarry3 жыл бұрын

  • It’s wrong, if’s a preset hub, its having a cone inside between the bearings, wtf 😡it’s 300 psi torque, no backing off, it’s a preset hub, it’s not old style man … Unbelievable, the shaking is from the lose bearings 🤯🤯🤯🫢🫢🫢

    @bobbymarcelbv@bobbymarcelbv2 ай бұрын
KZhead