KZhead
Тәжірибелік нұсқаулар және стиль

How To Make Boombox Speaker with WiFi, Airplay, Spotify Connect and Bluetooth

Cristian DIY
2023 ж. 27 Мам.
22 014 Рет қаралды
Жүктеу

Hey there, everyone! I'm thrilled to share with you a special project that I've been working on with the help of my friends at Arylic.
Using high-quality 18mm wood, we crafted a one-of-a-kind speaker that not only looks stunning but also delivers exceptional sound quality. With the amplifier sent by Arylic, this speaker produces an extraordinary audio experience that will blow you away.
In the video, I take you through the step-by-step process of building this speaker from scratch. From measuring and cutting the wood panels to assembling the components, you'll get an inside look at the craftsmanship and attention to detail that went into creating this masterpiece.
Once the speaker is complete, I showcase its remarkable sound performance. The audio is clear, crisp, and fills the room with rich, immersive sound. Whether you're a music lover or an audiophile, this speaker will undoubtedly impress you.
List Parts :
-Up2Stream Amp 2.1 - Multiroom Wireless 2.1 Amplifier Board :www.arylic.com/products/up2st...
-5s 30a BMS: s.click.aliexpress.com/e/_DB3...
-Speaker Feet Rubber :s.click.aliexpress.com/e/_DCz...
-Togle Switch: s.click.aliexpress.com/e/_DCD...
-Battery Indicator: s.click.aliexpress.com/e/_Dm5...
-18650 Battery : s.click.aliexpress.com/e/_ALrfoL
-21v 5s Charger: s.click.aliexpress.com/e/_De5...
-Nylon Standoff : s.click.aliexpress.com/e/_Dmr...
-Cable Tie Bases Mount: s.click.aliexpress.com/e/_DeH...
-Leather Handle: s.click.aliexpress.com/e/_Dmo...
------------------------------------
Arylic official web site: www.arylic.com
Other DIY Project :
Pallet & MDF Speaker Build : • Pallet & MDF Bluetooth...
Diy Fast Charging Power Bank : • DIY:Fast Charging Powe...
JBL GO- Restauration/Teardown | From plastic to wood : • JBL GO- Restauration/T...
MDF Speaker : • Homemade Air Cooler | ...
Lithium-Ion to NiCd/NiMh battery conversion , it will work ? Bosch cordless drill 14.4V PSR : • Lithium-Ion to NiCd/Ni...
How to Make Bluetooth Speaker with Wireless Charging: • How to Make Bluetooth ...
Turning Laptop Charger in Power Supply | DIY- Variable Lab Banch Power Supply: • Turning Laptop Charger...
------------------------------------
*Please HELP ME to REACH 4000 Subscribers!
/ @cristiandiy
*Thank you for wathing
----------------------------------
Contact: diycristian@gmail.com
Instagram : / cristian.diy
#DiySpeaker #Bluetooth #boombox

Пікірлер

  • Why no frequency filtering? The resistors on the tweeters are not worth a dime. The mid-range drivers play full range, which clearly is not their purpose. You can hear a lot of distortion in the bass, what makes your "exceptional sound" not so exceptional. Since you used and old reflex port, it surely isn't calculated, as the cabinet is just big enough, to fit all the components. You have built additional chambers for the mid-rangers at least, but you should put some damping material into these chambers. Also some damping material behind the woofer will help prevent the distorted bass. The build itself is good, its a nice and proper built cabinet. But there is a lot of room to improve the sound quality.

    @ScarfaceHood@ScarfaceHood9 ай бұрын

  • Amazing speaker, super! 😎🔊🤟

    @GatoConEstiloYT@GatoConEstiloYT4 ай бұрын

  • Muy buana bocina estoy ahorrando para hacerme una igual 😎🔊🤟

    @GatoConEstiloYT@GatoConEstiloYTАй бұрын

  • Nice Build! Great workmanship on the wood components. I'll also note what @ScarfaceHood has mentioned. - Proper crossovers are needed for high quality sound. A simple resistor, capacitor, inductor circuit can be constructed to crossover the midrange to the woofer, and the highs to the tweeter. - Tiny chambers for the midranges should use either polyfill or foam walls to reduce box resonances. - Calculate the internal area for the box, and figure out the proper port length for the tuning frequency you would like. - Since this is such a high quality build, I would use better speaker components. A proper 6.5 inch, like the Dayton DCS165, nice 3 inch midrange drivers, like the Dayton Designer Series, and a decent tweeter, like the Dayton ND25FA would really improve the sound.

    @ksb916@ksb9166 ай бұрын

  • nice powerful speaker.

    @sorinmelcete1681@sorinmelcete168111 ай бұрын

    • Thank you ! ❤️

      @CristianDIY@CristianDIY11 ай бұрын

  • I want to try to make like this too

    @kanzstudio@kanzstudio8 ай бұрын

  • ❤

    @alessandropezzella4121@alessandropezzella412111 ай бұрын

  • At which distance you put your mic for final sound test? Can provide detailed information about the dimensions of the box and the port.

    @pritampaswanyt@pritampaswanyt3 ай бұрын

  • 👍

    @diy-woodcreator@diy-woodcreator10 ай бұрын

  • bom dia ,o senhor poderia passar as medidas da caixa ???

    @caljazz@caljazz6 ай бұрын

    • 25cm x23x cm x 40cm

      @CristianDIY@CristianDIY4 ай бұрын

    • boa tarde,muito obrigado

      @caljazz@caljazz4 ай бұрын

  • the barrel is too thick

    @cuongtranxuan1008@cuongtranxuan10084 ай бұрын

  • пожаронебезопансный проект, размещение и крепление проводов и самого аккумулятора, это жесть.

    @kominev@kominev2 ай бұрын
KZhead