KZhead

Customizing a GAN 11 M Pro like a PRO!

SpeedCubeShop
2020 ж. 4 Қар.
130 852 Рет қаралды
Жүктеу

Buy it now: speedcubeshop.com/products/ga...
SOCIAL:
Instagram: / speedcubeshopofficial
Facebook: / speedcubeshop
Twitter: / speedcubeshop

Пікірлер

  • Great video, now all I need is a gan 11 m pro

    @raystrangeuwu@raystrangeuwu3 жыл бұрын

    • Same man...

      @jude3220@jude32203 жыл бұрын

    • Same...

      @nourganouni@nourganouni3 жыл бұрын

    • Ya same

      @justaregularhumanbeing@justaregularhumanbeing3 жыл бұрын

    • Lmaoo

      @ThePuzzleTurner@ThePuzzleTurner3 жыл бұрын

    • yeah same

      @cuberchez818@cuberchez8183 жыл бұрын

  • The gan 11 m pro looks awesome with black internals

    @bubbaboi2332@bubbaboi23323 жыл бұрын

    • Agreed.

      @RealNaoh@RealNaoh3 жыл бұрын

    • Yes

      @jacksoncuber8626@jacksoncuber86263 жыл бұрын

    • @Rafael Mendez nice

      @bubbaboi2332@bubbaboi23323 жыл бұрын

    • Mine is black internal too.

      @Toletanus@Toletanus3 жыл бұрын

    • Mine is black internal to

      @christhecreative210@christhecreative2102 ай бұрын

  • I can’t even pop out the Center without me thinking that my Gan 11 M pro is gonna break

    @javierthenoob4456@javierthenoob44563 жыл бұрын

    • Exactly I just opened mine today!

      @aanaishapoddar@aanaishapoddar3 жыл бұрын

    • Same

      @thorbenmaas7848@thorbenmaas78483 жыл бұрын

    • @@thorbenmaas7848 same

      @underio@underio3 жыл бұрын

    • I went to order it but when i used the discount code and payed i remembered i am broke

      @Evotionn@Evotionn3 жыл бұрын

    • Me too

      @sochaky5762@sochaky57622 жыл бұрын

  • One cube, four versions, insane customizability, great performance .... what could you ask for better than that.

    @muktamondal7254@muktamondal72543 жыл бұрын

    • Great price.....

      @gauthamgopinath3362@gauthamgopinath33623 жыл бұрын

    • Should've added except for that

      @muktamondal7254@muktamondal72543 жыл бұрын

    • Now 5 version, coz they added the sticker

      @pll__skip@pll__skip3 жыл бұрын

    • less catching lol

      @etafol@etafol2 жыл бұрын

    • gan 13

      @Ultra23Ahan@Ultra23Ahan Жыл бұрын

  • This was my first Gan so I was a little frightened to do anything to the tensioning and such but I totally understand now, thank you! I also apparently overlooked the fact that I could change the corner magnets so that was good to know.

    @elisabethherzog9369@elisabethherzog93693 жыл бұрын

    • hhhm funny this is also my first gan

      @Suni_C0W@Suni_C0W11 ай бұрын

    • Same too!

      @query25@query257 ай бұрын

  • I’ve had this cube for over a year now and only just learned how to properly customise it so thanks a lot!

    @tommycotter8260@tommycotter82602 жыл бұрын

  • I tried the full range of limit and tension settings from the tightest to the loosest. It's still super stable at the loosest setting and not very squishy at all, though there will be an occasional floppy snap, which I decided I didn't need. The other end of the spectrum is also excellent. Despite the graph in the documentation, corner cutting doesn't get significantly reduced until a limit setting of one (at least for my tastes). Again it's super stable at the loosest setting, but it made perfect sense to go with the tightest limit setting that was comfortable on the corner cutting; and for me that was 2, though 3 is great too. From there, I adjusted tension to taste (second click/step three [however you prefer to count]). What a great cube.

    @TesserId@TesserId3 жыл бұрын

  • I ordered mine yesterday this information goona be really helpful thanks!

    @NYCUBING@NYCUBING3 жыл бұрын

  • Thank you for this video this is my first customizable cube and this video made it less depressing

    @naurthanks6122@naurthanks61223 жыл бұрын

  • Thank you Cameron! This tutorial helped me a lot!

    @user-ms6sd6wh1p@user-ms6sd6wh1p2 жыл бұрын

  • thanks now i can easily customize this cube keep it up

    @brcb2@brcb23 жыл бұрын

  • Awesome... so helpful from a newbie. Appreciated

    @scott_sauce@scott_sauce3 жыл бұрын

  • I love the vid for the corner magnet strength thx

    @ultrachad5492@ultrachad54922 жыл бұрын

  • Nice! I needed this

    @aglcubing9680@aglcubing96803 жыл бұрын

  • My GAN 11 M Pro is coming for Christmas and i never owned a GAN cube before. Thanks for the video. It isn't that overwhelming anymore. Keep in mind, i said "that overwhelming anymore".

    @mihirmalladi8494@mihirmalladi84943 жыл бұрын

  • Great video Cameron keep up the great work!

    @louisbar111@louisbar1113 жыл бұрын

  • thank you! i can now fully customize it!

    @ivanbashmachnikov6007@ivanbashmachnikov60073 жыл бұрын

  • Just what I wanted, the smallest commercially available flathead screwdriver! Thanks for the guide, SCS. I won this cube as my first GAN Cube besides the 354 v1 with no nuts (I wont the 11m Pro from a Cubicle giveaway XD)! But this is amazing, thank you and best wishes!)

    @Fatigue-Lost_AirBassist@Fatigue-Lost_AirBassist3 жыл бұрын

    • My v1 was so bad the nut unscrewed itself

      @kevinlin4662@kevinlin46623 жыл бұрын

  • I was messing with it and turned the tension nut clockwise and it popped and a piece came out put it back in just fine but did I mess anything up?

    @tyleranderson6213@tyleranderson62133 жыл бұрын

  • Nice! My GAN 11 M Pro (From SpeedCubeShop of course) will arive tomorrow, Can't wait to start customizing it!

    @porglomber@porglomber3 жыл бұрын

    • SCS said that my uv coated version will be delayed

      @daveendaya0077@daveendaya00773 жыл бұрын

  • Thanks it was very helpful!

    @monkiplayz3834@monkiplayz38343 жыл бұрын

  • 3:58 isn't it 2 and 4 on the dark blue

    @pcniv@pcniv3 жыл бұрын

    • Yes

      @donv4256@donv42563 жыл бұрын

    • Ahahahah

      @ausy1356@ausy13563 жыл бұрын

  • Worked very amazing

    @Vansh_71611@Vansh_71611 Жыл бұрын

  • Thanks! Learn cube off the net, you r a great help

    @colelacey2875@colelacey28752 жыл бұрын

  • you make popping out the center cap look easy

    @olleh1@olleh13 жыл бұрын

  • This is why tingman ranked your thumbnails as the best

    @CANVASARTS123@CANVASARTS1233 жыл бұрын

  • Thank you so much Cameron! I managed to fix my gan because it almost broke.

    @adnanls@adnanls2 жыл бұрын

  • Hey Cameron, i was just wondering what lubes do you put in the 11 M Pro when you pay for the pro setup option? I bought one with that option and was just wanting to know what lubes to buy for it when i need it

    @cohendraper8524@cohendraper85242 жыл бұрын

  • Where did the UV coated gan 11 m pro gone? I was planning to save up and buy it. Pls put it back.

    @nevergonnagiveyouup4270@nevergonnagiveyouup42703 жыл бұрын

    • gan stopped selling the us coated

      @blooberry48@blooberry483 жыл бұрын

    • uv*

      @blooberry48@blooberry483 жыл бұрын

  • What do you think is the best lube/ lube combo for this cube?

    @gabryy768@gabryy7683 жыл бұрын

  • Very very good cube

    @ASDCUBER@ASDCUBER3 жыл бұрын

  • I like changing the mangnets and putting the hex magnets but I used tweezers instead of my fingers

    @tommybaker6779@tommybaker67793 жыл бұрын

  • Great video...but what abou the nemebers on the corner's magnets please?

    @kidfineful@kidfineful2 жыл бұрын

  • Eeeeee idk y im saying this here but my valk 2 m and my timer is comin today so im suuuper excitedd

    @ryanxu9983@ryanxu99833 жыл бұрын

    • did you get them yet?

      @christhomas6063@christhomas60633 жыл бұрын

    • @@christhomas6063 lol yee

      @ryanxu9983@ryanxu99833 жыл бұрын

  • Can you Lube it without breaking the adjustments that can change the corner magnet strength?

    @MagicalTeoSub@MagicalTeoSub Жыл бұрын

  • I didn’t realise that I ordered mine a stickered cube until I got it. Is there any chance I could return it in exchange for a stickerless cube?

    @6cosmic722@6cosmic7223 жыл бұрын

  • hex core magnets + setting 1 on corner magnets = ideal roux set up

    @RofICopters@RofICopters2 жыл бұрын

  • U R’ the best man

    @ChaimMosheZaltsman@ChaimMosheZaltsman3 жыл бұрын

  • I ordered a cube from your website and I live in Sa. How long will it take to get here.

    @krish_yt3607@krish_yt36072 жыл бұрын

  • Nice video!

    @olivia8440@olivia84403 жыл бұрын

  • I am having a hard time removing the triangle magnets, any tips how to remove it. On the video , it looks so easy.

    @geocine@geocine2 жыл бұрын

  • what loosens it on the blue thing, is 1 loose or 4 loose?

    @fabianreis3946@fabianreis39462 жыл бұрын

  • The magnet adjustment doesn't change the corner magnets under the plastic it only moves the corner stock magnets closer and Farther from the core magnets.

    @sub-1414@sub-14143 жыл бұрын

  • For the light blue nuts, if the number is high does it mean its tighter?

    @JustARandom_Duck@JustARandom_Duck16 күн бұрын

  • Hey SCS can you please tell me what are the default settings for the gan 11 m pro

    @anonymouscuber1055@anonymouscuber10552 жыл бұрын

  • Great video

    @mateuszguzowski9533@mateuszguzowski95333 жыл бұрын

  • Do you goes only have the frosted ones in stock/ when should we expect the soft variation to be shipped?

    @marshalsobrero@marshalsobrero3 жыл бұрын

    • never now

      @Zyrilix@Zyrilix3 жыл бұрын

    • @@Zyrilix lol I was able to get the soft variation and the uv one.

      @marshalsobrero@marshalsobrero3 жыл бұрын

  • When you're removing the numerical distancing nut, is it possible for the tension to get messed up? I turned mine from the default to 4 and it keeps popping. Please help

    @justarandomguy6816@justarandomguy6816 Жыл бұрын

  • My cube has 2 customization. Lubed and unlubed :b

    @crctornado7175@crctornado71753 жыл бұрын

    • If it has screws, it's practically infinite

      @StaticNebula26@StaticNebula263 жыл бұрын

    • @@StaticNebula26 obviously you don’t know, what infinity is

      @lennoxgeuken912@lennoxgeuken9123 жыл бұрын

    • @@lennoxgeuken912 the planck length limits it to countable, so its practically infinite

      @StaticNebula26@StaticNebula263 жыл бұрын

    • yes

      @cuberchez818@cuberchez8183 жыл бұрын

    • @@StaticNebula26 yes i noticed it

      @crctornado7175@crctornado71753 жыл бұрын

  • Interesting video!

    @nilmaj1175@nilmaj11753 жыл бұрын

  • How do you deal with carpal tunnel?

    @GorggW@GorggW3 жыл бұрын

  • Really INFORMATIVE VIDEO; it was very helpful. I look forward to adjusting my coming GAN 11M PRO using the acquired knowledge from this video. Ans, I have on question. Is the DARK BLUE nut for a tighter tension or looser?

    @Sheikhm007@Sheikhm0073 жыл бұрын

    • The dark blue nut has settings number 2 and 4, so basically yes, it is.

      @porglomber@porglomber3 жыл бұрын

    • The Floral blue has 2 settings. 1 and 3 Setting 1- Tightest very stable Setting 3-Loose. Kinda unstable Dark blue also has 2 settings 2 and 4 2-Looser than 1 but tighter than 3 and 4 4- Loosest setting. Very unstable,could pop and will corner twit easily.

      @sarikasawhney2278@sarikasawhney22783 жыл бұрын

    • @@sarikasawhney2278 Thank you so much for informing.

      @Sheikhm007@Sheikhm0073 жыл бұрын

    • @@porglomber Thank you so much for informing.

      @Sheikhm007@Sheikhm0073 жыл бұрын

    • @@Sheikhm007 thx

      @dunkmanten2257@dunkmanten22572 жыл бұрын

  • Geary video, really helpful :) Just a question though, are you sure that the triangular magnets are weaker? I tried them in my 11 M Pro and they seem stronger to be honest.

    @neptune364@neptune3643 жыл бұрын

    • Same actually

      @timspencer520@timspencer5203 жыл бұрын

    • @@timspencer520 they arent the same

      @purplespacesnail6836@purplespacesnail6836 Жыл бұрын

    • @@purplespacesnail6836 he meant he thought the same, he didn't say they were the same.

      @yurei7394@yurei73944 ай бұрын

  • The cube come with what number in the tensions?

    @lisca.2000@lisca.20002 жыл бұрын

  • 4:08 How? 😯💨 By using the hextangle magnets?

    @hoangthong2040@hoangthong2040 Жыл бұрын

  • SCS intro is so nice...

    @speedcubesolver1195@speedcubesolver11953 жыл бұрын

  • I have an issue during the solve the corner's magnets changes from 1 to 2 or 2 to 3

    @kidfineful@kidfineful2 жыл бұрын

  • I'm getting this cube

    @KendrickGaspan@KendrickGaspan3 жыл бұрын

  • The corner mechanism: Does it control the center-corner magnets or the corner-edge magnets? Saw some reviewers saying the one and some the other and I'm confused 🥴

    @bensilashi8262@bensilashi82623 жыл бұрын

    • It moves rhe the corner core magents it moves the magents in the corners it will change the distance from the corner from the core magnets hope this helped

      @jaydonturner2367@jaydonturner23673 жыл бұрын

    • Watch Shawn from Speed Cube Review. In His Gan 11 video you can see the corner stock magnet move in and out of the corner piece when he moved the corner adjustment. Time Stamp: (4 : 10)

      @sub-1414@sub-14143 жыл бұрын

  • On my 11 pro wich nuts will make it tighter. I'm on dark blue and it's to loose. I am a hard snappy turner. If the dark blues are the tightest I guess I will Dig and gav the lube it

    @colelacey2875@colelacey2875 Жыл бұрын

  • Thank you so much.

    @samgayed1837@samgayed18373 жыл бұрын

  • what is the original tension

    @WattsieMMA@WattsieMMA2 жыл бұрын

  • what about the extra set of magnets? not the triangle or hexagon ones, but some really tiny magnets that came in a plastic bag? do you replace them with the core ones or put them on top of the core ones?

    @CrasyFingers@CrasyFingers2 жыл бұрын

    • well here goes nothing, i'm putting them on top of the original core magnets in hope for stronger overall magnets

      @CrasyFingers@CrasyFingers2 жыл бұрын

    • well it didn't work, the extra magnets are obstructking the whole thing and it moves terrible

      @CrasyFingers@CrasyFingers2 жыл бұрын

  • AY CAMERAN MA FRWEND YAAAAAAAAA POG

    @quakogaming4526@quakogaming45263 жыл бұрын

  • i got one! this is AMASING

    @uritaanach1377@uritaanach13773 жыл бұрын

  • Is this frosted or soft?

    @Spencerspeaksss@Spencerspeaksss3 жыл бұрын

  • Alternate title : Making an unaffordable cube even more unaffordable Oh yeah, and don't forget that extra 32 dollar shipping

    @cuberchez818@cuberchez8183 жыл бұрын

    • Shipping is free for me. 🤷🏻

      @RealNaoh@RealNaoh3 жыл бұрын

    • Idk why but my reply got deleted I said that SCS has 15$ shipping for Asia as well. And if u spend a certain amount u can get free expedited shipping. The current rate for free expedited shipping is to spend 14.5k inr.

      @sarikasawhney2278@sarikasawhney22783 жыл бұрын

    • @Rayyan Humayun ya. In india the shipping cost is approx $14.98 for the standard shipping.

      @sarikasawhney2278@sarikasawhney22783 жыл бұрын

    • @@sarikasawhney2278 You can Buy your Cubes in Cubelelo which is an Indian Based Cube Store And you can also use MACubing Discount Coupon

      @soullessloner4062@soullessloner40623 жыл бұрын

    • @@sarikasawhney2278 yeah like everyone has 14.5 thousand rupees right in their pockets. My 6 month school fee itself is around 12k🙄😏 I can buy a brand new cycle with 14k I think you are quite rich Aap log kabhi middle class cuber ka dard nahi samjhoge Kisi ek jamane mein hame bhangar brand cube se cubing karni padti thi! And for your 15 dollar question, we have to face 15000 questions for so much money. some common lines from our mahan parampujya matashri and pitaji: Website safe hain kya? Scam to nahi? Apan paas wale dukan mein bhi milte hain.Kyu paise waste kar raha hai? Beta, padhai kar. Ye bohot mehenga hai.(Even though I get about 100% in every exam!) Kitne cubes hai re tere paas, aur kya chahiye! (Only 6 cubes hain!) Ye itna mehenga liquid kyu le raha hain? (lube) paani use kar na! In middle class families, and even 15rupees is " *too much* " for a child (Child aging from 0-16 years!) to give! He/she might lose it, or worse, overspend it! Sirf sabji/samaan lane ke liye paise milenge! Mujhe hi pata hain, mein cubes kaise liye hain! Jaane do, Gan user kya jane YLM wale ka dard!!

      @cuberchez818@cuberchez8183 жыл бұрын

  • I ordered mine 1 week ago, now I wont need to watch this with a meaning

    @umut_af5806@umut_af58063 жыл бұрын

  • Cameron please help I was doing the distancing but part and the hexagon thing and the plastic just popped out

    @fwyoboilevi@fwyoboilevi2 жыл бұрын

  • what is the deafult tension?

    @jack---@jack---2 жыл бұрын

  • Hi speed cube shop and cameron

    @rayalakeertan7707@rayalakeertan77073 жыл бұрын

  • when I try, I can't get the center cap off :( and it a little too tight to :/

    @TheRealBigMacPants200@TheRealBigMacPants200 Жыл бұрын

  • bro, in gan 11 m pro which stronger magnet triangel or hexagonal?

    @yogasuprayitna@yogasuprayitna5 ай бұрын

    • Hexagonal

      @ThirdyBxx@ThirdyBxx3 ай бұрын

  • i just got an XS like a week or 2 ago ;-;

    @lithum2484@lithum24843 жыл бұрын

  • Uh i need help i turned the tensioning system thing clockwise and now my entire white layer came off and im panicking

    @kakaboi4373@kakaboi43732 жыл бұрын

  • Is there an SCS email list?

    @justinvork3408@justinvork34083 жыл бұрын

  • Do you ship in Pakistan

    @BRO_BACHA_YT@BRO_BACHA_YT2 жыл бұрын

  • Mee too I also want gan 11m pro

    @rishikesh5205@rishikesh52053 жыл бұрын

  • I have a question. I have it on distancing setting 4 (most distance allowed, I assume), and it still cannot corner cut 45 degrees. Is there a way I can verify why this happens?

    @royitaqi@royitaqi11 ай бұрын

    • Because the higher the number the tighter which makes it more pop resistant but less cornercutting

      @ThirdyBxx@ThirdyBxx3 ай бұрын

  • Thanks cameron

    @wasimakhtarnk@wasimakhtarnk3 жыл бұрын

  • I’m thinking about buying the GAN 11 M Pro. Should I get black or primary internals? 🤔 what are your thoughts?

    @jacksoncuber8626@jacksoncuber86263 жыл бұрын

    • Primary

      @sarikasawhney2278@sarikasawhney22783 жыл бұрын

    • @@sarikasawhney2278 thank you for your opinion

      @jacksoncuber8626@jacksoncuber86263 жыл бұрын

    • @@jacksoncuber8626 do u want the reason for why I think that?

      @sarikasawhney2278@sarikasawhney22783 жыл бұрын

    • @@sarikasawhney2278 yes

      @jacksoncuber8626@jacksoncuber86263 жыл бұрын

    • @@jacksoncuber8626 ok. The black internals might look better but the primary internals are better for speed solving. It reacts better to lube, gives a smoother feel and overall leads to less lockup’s and fluid solves. That’s why I think that. Saying because I have an 11m black,primary and an xs. Hope I help.

      @sarikasawhney2278@sarikasawhney22783 жыл бұрын

  • What’s the song in the background?

    @donalds4506@donalds45063 жыл бұрын

  • Can someone pls tell me how to tighten cube cuz every time I play with it it just pops

    @IcyGlider@IcyGlider2 жыл бұрын

  • it already a PRO

    @noobiequendog6230@noobiequendog62303 жыл бұрын

  • My 11 m pro popped into plastic pieces on my first day you saved my life

    @mohammedbilal3492@mohammedbilal3492 Жыл бұрын

  • The Gan 11 Pro with black internals looks the same as the stickerless Gan xs actually

    @stickmantony8243@stickmantony82433 жыл бұрын

  • Wish I had that cube.😔

    @kenethchavez6334@kenethchavez63343 жыл бұрын

  • Hey Speed Cube Shop, I have been trying to find a good setup for the Gan 356 air m, and I was wondering what SCS Lube you would recommend for that particular cube, if you have a suggestion please let know , that would definitely help me a lot 👍🏻👍🏻

    @method2584@method25843 жыл бұрын

  • what song is this?

    @codyss7570@codyss75703 жыл бұрын

  • 1:04 Doesn't each corner piece have 3 adjustments (because it has 3 "inward"-surfaces), thus totalling 24?

    @felixtritschler5096@felixtritschler50962 жыл бұрын

    • No

      @wjatek997@wjatek9972 жыл бұрын

    • thats not how it works

      @michellewang2258@michellewang22582 жыл бұрын

  • What version of the Gan 11 pro is that?

    @kotori106@kotori1063 жыл бұрын

    • Probably the frosted one with black internals

      @harshitagarwal7659@harshitagarwal76593 жыл бұрын

  • 1% people using their imagination having a GAN 11 m pro😅

    @willymangorsi4457@willymangorsi44573 жыл бұрын

    • I gonna buy one it my 2nd 3x3

      @SanjayJohnKing@SanjayJohnKing3 жыл бұрын

  • Hey scs i want a cube be here in kenya africa can you supply one

    @Rongai_massive._@Rongai_massive._3 жыл бұрын

  • thanks cameron

    @dekuu2461@dekuu24613 жыл бұрын

  • First, when I did it, it almost broke but I managed to fix it back

    @christhecreative210@christhecreative2102 ай бұрын

  • I just got the gan 11 m pro

    @hothound2012YT@hothound2012YT Жыл бұрын

  • This should’ve came with a little ranch two lol

    @rbfl_offical@rbfl_offical Жыл бұрын

  • I have some questions because I might be able to buy this on Christmas or next year, first question is: I live in the Philippines so is there any shipping fee? Second question: do you accept Cash on Delivery payment? Third and last: if you accept the Cash on delivery payment, what currency do I pay with? What I mean is do is pay $64? Or do I use our currency like $64 is equal to 3000 so do I pay you 3000? That's all, overall I really want to buy that cube. :D

    @glaizabaquiran1988@glaizabaquiran19883 жыл бұрын

    • Lods bumili ka nlang sa shopee, Cubingwizards ganon din sya tas may free stickers pa, walang damage at complete ung laman ng box

      @dylanmartinez6275@dylanmartinez62753 жыл бұрын

    • @@dylanmartinez6275 ok salamat. Sa shopee na lang ako bili. mrmathwizards ba yung name ng seller or Cubingwizards? Edit: nahanap ko na thank you

      @glaizabaquiran1988@glaizabaquiran19883 жыл бұрын

    • @@glaizabaquiran1988 oo yun yon mrmathwizards

      @dylanmartinez6275@dylanmartinez62753 жыл бұрын

    • @@glaizabaquiran1988 welcome haha

      @dylanmartinez6275@dylanmartinez62753 жыл бұрын

  • OMG TYSM now I am sub 10

    @epicmagician9162@epicmagician91623 жыл бұрын
KZhead