INVENTIONS FOR A PICKUP TRUCK THAT YOU SHOULD KNOW ABOUT
Mind Warehouse ► goo.gl/aeW8Sk
1) BedLock
www.kickstarter.com/projects/...
2) Busy Dumper
• Busy Dumper
• Busy Dump Insert Perfo...
• Busy Dumper - Long Bed...
3) Aero X
facebook.com/watch/?ref=s...
facebook.com/watch/?ref=s...
• The Aero X truck cap b...
facebook.com/watch/?ref=s...
4) Smoke Racks
(preview)
• 2002 f250 7.3 powerstr...
• 1st Gen Cummins Straig...
5) C5 Manufacturing Rancher Bale Bed
• Rancher Bale Bed
• Rancher Bale Bed
6) Marlon XPLORE II SXS DECK
• Let’s go side by sidin...
• Dirt Trax AJ Lester re...
• Marlon Xplore II SXS Deck
7) BoxTamer
• BoxTamer | Pickup Truc...
• How To Assemble The Bo...
8) TANGO Pickup Truck Transformation System
• Toyota Hilux Revo - TA...
• Ford Ranger TANGO Tran...
• Nissan Navara NP300 - ...
9) XG Cargo
• The "Magellan" Sportsb...
• Mounted Sportsbar Stor...
10) Black Armour Bed Mats
• Rinse, Repeat | Black ...
• Unrivaled, Invincible ...
• Black Armour Bedmats
• How to Install Univers...
• Black Armour Cut
11) RoverKing
• This model is no longe...
• Shorts
• Shorts
• Shorts
12) Load-it
• Load It - Automatic Bo...
13) Decked Drawer System
(preview)
• DECKED Test | Dust Res...
• DECKED Test | 2000lbs ...
• DECKED 101 | Install M...
14) Bruno Out-Rider
• Truck Wheelchair Lift ...
• Bruno Out Rider Wheelc...
• Link transfer seat and...
• Bruno Out-Rider PUL-11...
15) HUMBRA FIREFLY
www.kickstarter.com/projects/...
16) Elongator
• Elongator Introductory...
• Ramp Bridge Introduction
17) Cowtown Sleeper
• Roadrunner Sleeper on ...
• 42" Sleeper/Sitter on ...
• DOT Sleeper w\ AC unit...
• Roadrunner 42" with wr...
18) HURACAN TAILGATE STORAGE
(preview)
• Huracan Fabrication Ra...
• Huracan Fabrication's ...
19) Thule Helium Platform XT
(preview)
• Thule Helium Platform ...
• Thule - Helium Platfor...
20) MobileStrong Truck Bed Storage Drawers
• Personalized SUV & Pic...
• MobileStrong Wheel Wel...
21) GREAT DAY Truck N Buddy
(preview)
• Truckin Buddy
• Magnum Truck N' Buddy ...
00:00 - BedLock
01:00 - Busy Dumper
01:49 - Aero X
02:40 - Smoke Racks
03:08 - C5 Manufacturing Rancher Bale Bed
03:46 - Marlon XPLORE II SXS DECK
04:36 - BoxTamer
05:08 - TANGO Pickup Truck Transformation System
05:42 - XG Cargo
06:27 - Black Armour Bed Mats
07:20 - RoverKing
08:11 - Load-it
08:51 - Decked Drawer System
09:29 - Bruno Out-Rider
10:07 - HUMBRA FIREFLY
10:48 - Elongator
11:31 - Cowtown Sleeper
12:14 - HURACAN TAILGATE STORAGE
12:51 - Thule Helium Platform XT
13:36 - MobileStrong Truck Bed Storage Drawers
14:08 - GREAT DAY Truck N Buddy
For copyright matters please contact us at: copymanager.mn@gmail.com
Bought a Decked system for my Ram 1500. 1) Forget about anything in the back 1/3 of the drawer. You have to remove stuff to get to it. 2) Cannot handle 100ish pounds without breaking the corner that rests on the bottom track wheels. 3) Parked on a hill? You will have to hold the drawer open while you try to get tools out - no stop system to open the drawer in increments and lock in place. Next time I will build my own drawer system. Oh and I almost forgot, they do not include the cheap plastic dividers that don't stay in place very well anyways. I had to put screws in the dividers. I store mostly Dewalt cordless tools in mine with a divider for bits and blades. I have to remove most of the tools to get to a Dewalt bag in the very back that carries my tool cordless tool accessories. Probably works great for sportsmen.
Thank you for the update, TechZone..!! Amazing compilation video of awesome pickup truck inventions..!!
I’m sure that xsx deck fully loaded taking a curve at anything over 30 mph. The center of gravity is so high that danger level is high.
And at $3300. Just buy a trailer
@@xxUncleBuckxx Agreed, however the one traveler I’ve seen who was using a rig like this was also pulling a camper.
@@patbullard9276 just buy a toy hauler Id like not for you not to tip over on my truck
Products for people that should have bought a van instead of a truck
Classic dump-van.
Very easy answer . It's a prius with a bed ..
@@justingraham7387 lol what.. a van has a truck frame, it can trailer just as much. Can get them with AWD too.
@@deskbreakersome of them will actually have larger gvwr because they're designed for passengers. My dad had a ¾ ton that was no bigger than a long bed pickup, 12 seater that was used originally to transport employees. Had a payload much higher than my grandpa's ¾ ton dodge (94). (I was a young kid so I don't know the actual numbers). Because the van was designed to haul 12 people and gear, it was extra heavy duty. You figure the average guy there was 180-200lbs, plus all the gear. Most ¾ ton pickups at that time didn't have that large of a payload.
I hate my van😢
Smoke Racks, because hot exhaust pipes don't take up enough of your short bed.
You also get the bonus of the exhaust fumes coming in the cab with you.
Busy Dumper - That's my nickname when I have to go to the bathroom at work.
Bet the smoke rack gets hot.
I thought that ramp was silly. Then I see that thing called the box tamer. Have you never heard of a 2x6 most pickup trucks, especially those with wine bay beds have notches so that you can slide 2x4s or 2x6s into them so that you can pull the cargo in your bed without it sliding all over the place. Or buying an ancillary product that necessitates you having to drill holes in the sheet metal of your truck that are definitely going to rust out because I didn't see them mounting them with any kind of grommets or anything that are going to prevent those little pinholes from getting full of rust, especially here in Maine where I live
😅
There's a few really good ideas here, and quite a few goofy ones. Pleased to hear about the truck bed sleepers. Those exhaust stacks are nothing new and very shoddy, so I'd not buy THOSE stacks but I'd hesitate to sleep in a truck that didn't have some sort of topside exhaust.
The Marlon Xplore platform severly changes the center of gravity of the vehicle. If you are not careful taking a curve to fast will ruin your day. Also traffic lights ground clearance is only 17.5 feet.
This has got to be the stupidest fucking idea yet for a truck.......
That the same can be said with Load-it.
Carro de lujo 😊
Lightest bolt carrier group on the market. I have the same one and i upgraded the bolt to sharps reliabolt. Its realllll smoothhhhhh
I bought the Bruno VSL-6000 for my truck. It works okay. I paid $4,300 for it, but now I’m wishing I had purchased a lift gate instead for half as much.
I'm looking for examples of those bed covers that that angle from the back, top corners of the cab to the top of the tailgate. Similar to those automatic ones that some dump trucks have, usually covering dirt or stone. Only for a ram. I was trying to find ideas for a custom cover like that but not automatic, maybe wind up. Any ideas are appreciated ☺️
Thanks for including the prices.
Always like you because you give us the price on each as you show them 😊
hi i love watching your videos hope you have a good day
The only thing in this video that is worth talking about, is that bale unit for a flatbed.
It is not mentioned that when dirt, rocks, and snow get into the bed divider slots. You can not put the walls in. It's totally worthless. The ATV carrier creates a top heavy load. Also, the truck bed is now worthless. If you want to cover the truck bed to make it more aerodynamic. Then don't buy a truck!
Very true
Wow. This did not go as I expected
Wow the Aero X $7500 neat design for pickup bed if you are a cityboy who doesn't use your truck bed. But for that price you could purchase 2 full size truck toppers.
Innovative
4:08 I am sure sure the vehicle wont be top heavy at all when one puts 2800lbs up there.... Might want to take turns even more slowly!
El de la sombrilla en el porta remolque esta muy bueno 👍
😅
The Aero X for when you bought a truck but didn't actually want a truck.
TY T.Z
These prices are outrageous on everything
Some really cool gadgetry!👍🏻😁
the only thing i saw in this whole video that was actually unique but still handy was the tailgate storage. I'm considering buying one just for the fact that i was already wanting some rear bed storage and it really cant get any sleeker than being inside the tailgate and the price isn't horrible in comparison to buying a small box for each side. I'll probably brace more areas though.
That sleeper is good for the guys using f350' and Silverado 3500s to run hot shot catgos
Aero X looks fantastic,but price point seems a little elevated for fiberglass & plastic louvers.
I was excited about it, looks awesome, but not for that price
That better include the matching paint otherwise it could be at least another thousand or two.
This channel is what keep me going every day
The wheel is one of the earliest and most fundamental inventions. Its introduction revolutionized transportation, making it easier to move goods and people.
That AreoC looked like my old 69 Mach1
“Smoke Racks” for the 18 wheeler wannabe. 🤣
bro the first one is actually a really good idea
Save yourself 400 dollars and buy some plastic milk crates it does the same thing..
oh thats actually a really good idea, thanks@@larry40
So, Only for the rich. 👍 Got it.
I didn't hear one Price that made me want to buy anything at all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Wow 😲
The box tamer is a waste of money. For my truck I measured the distance between the grooves at the back of the box, then I ripped a 2x10-8ft down to the proper length. Next I cut the corners on the bottom for it to sit flat in the box. I also have the smaller d-rings screwed on for securing small objects. Cost less than $30 CDN.
Or you can buy them called horse mars for $39 to S,$60.
I wonder if his video could be just a little bit louder. Only two quarts of blood burst from my eardrums and I was hoping for three or four.
What nut case would cut a hole in the bed of a truck for an exhaust pipe? What a stupid thing to do, but I love the dump bed
Lol, that’s a good one
TECHZONE-maybe you could do several videos on the options available from each Pickup Truck manufacturer (Ford, Chevrolet, Ram, Nissan, Toyota)
Armor Mat..$330.. Bed liner $650.. I think I'd rather spend a few more dollars.
I'll just keep using my sheet of plywood.
I have the armor mat and it is excellent quality and useful. I’ve had the Bedliner spray in and they all seem to get dirtier and dirtier each year that you have it. For me I prefer the original paint with the mat. There’s another option out there that is like a cross between the two, might work for some
That aero x if you think that your short bed is about useless now. Put that think on there. Of course if your really into Halloween. You could dress your truck as a Tesla.
those aero covers are a rip off compared to some of the other gizmos 💸
2:46 those are extremely LOUD and illegal in many areas, I know one area that owner was extremely bad took off for work after midnight revving engine, well someone poured concrete into his exhaust pipes to make it quiet... 🤣 3:46 this places weight too high and causes height issues, curvy road with all that weight that high will not be safe also an issue on side streets with trees and wires that may be low and don't forget the drive throughs and gas stations with covers over pumping areas that are not really high
My ex girlfriend had a busy dumper. It was great!
Why are prices in dollars, but weights are in kilograms? Not sure what country this was produced for.
"...the basic kit comes in at $15,000 dollars..." I....what?
Really innovative products in this video. I found myself wishing I had a bigger truck to take advantage of some of these things.
you should be restricted to walking for the rest of your life.
1:50 how to shout to the world "I'm a douchebag"!
I’m guessing these items are aimed at euro shoppers as all pertinent numbers are in metric
The whole world is metric except for the USA and some other small country that is living in the past.......Metric is easier and more precise so I don't understand why the 2 countries don't change over
@@midbc1midbc199 many parts of the world are communist, slavery is still happening in many too, should we adopt those metrics?
@@MrCheeto01 LOL how did you juggle that in your head to make that comparison equal Adopt the metric system.......can't have that because it will raise Stalin Lenin and Hitler from the dead and everyone will be forced by gunpoint into work camps and factories to make new commie metric numbers on an assembly line night and day to replace the democratically elected imperial numbers......it will be world War number...... WW# it will be a war that ends mankind Ohhh nose spooky numbers
I don't understand the interview coaching ads cause companies are firing people L, R and C yet they still keep hiring. IDK how that makes sense.
They coach unqualified people how to pass interviews because they are the ones that will agree to lower pay.
Weathertech all the way
I actually thought that picture of a smoke rack was real cause i was gonna be like that gonna sound like.shit an be so bad for exhaust flow.
4600 bucks for a slide in dump bed? You can make the bed itself dump for less than 2 grand and carry more weight because you don't have that silly dump bed in your truck.
Waste of floor space with those silly pipes blocking the deck.
An admittedly expensive (over priced) mat for your pick up box is to inspire and even encourage owners to push the limits of what possible because....they are recycled? Does these people even vet what they are about to say/claim, or just some AI voice spitting out whatever the seller suggests?
I bought a perfectly good 1 ton duelly chevy dumptruck for $1,200. The seat is rough but who cares.
No....More....Bottle .....Openers .......
Aero Bed Cap only $7500. WHAT A BARGAIN! is covid still here?? Please Aero X don't create a model for the Maverick, our pockets aren't deep enough.
JEEP GLADIATOR, NOT COMPASS !
$7500 for a canopy which makes your truck useless for carrying anything? Any body shop could do a better job for under $1000.
A few of these are bloody ignorant and even worse for the price. Absolutely Absurd Some of the ideas are very cool, but the price tags they have on these things. Just absolutely ridiculous. I have always liked the decked product. The little pick up sleeper is nothing new. They have been around for probably 40 years or so. Cheers.
The reason you never see any of these is because they exorbitantly overpriced
thumbnail was a bit clickbaitey man.. disappointed you didn't show that one or hear what its like
That ramp for ATVs has to be the dumbest thing I have ever seen. Sure, you don't need to have skill or learn how to drive with a trailer. But you can use this thing be limited to what heights you can drive underneath. Not to mention the hundreds of dollars that you're going to be wasting on gasoline because it is going to make your vehicle. So aerodynamically inefficient that your miles per gallon are probably going to be somewhere around 4:00 or 5:00 if you've got a V8. So you'll go from 15 mi a gallon towing a trailer till like 5 or 6 mi a gallon trying to beat the wind resistance
And all because you don't want to put on your big boy pants and learn a new skill like driving with a trailer. And I'll let you know a little secret. All the people that you see at the boat launch or at the Agway that are back in their trailers off and they do it expertly and with out what looks like a care in the world, they all started out being scared squeamish and not knowing how to follow a trailer. But you learn and then you get good at it. And then you too can become the envy of everyone at the trails or the boat launch
Not to mention the handling difference when you put that much weight that high from the center of gravity of the vehicle. No sudden changes in direction please.
Most of these items are ridiculously overpriced proving that people have more money to waste than common sense.
Those little bags that only hold 5 pounds sell for $190 each....... Now that is a ripoff
Estafa es esto
Aero X, dress you pickup as a car... Why dont buy a SUV or a car from the beginning?
Most of these gadgets I’m confused about. Spend 6500 to get better mileage? Put you quad on your truck for 3500 to by 3 trailers that can pull it?
Fucking kilograms... wow.
Or you could just buy a van and stop pretending you're all farmers and ranchers.
My ex girlfriend had a smokin' rack too.
The bike rack what a stupid idea? cover up taillights is a good idea no one needs to know if your braking. All these ideas of putting things to the back of cars and trucks is stupid I have seen a two bike rack caring 6 bikes and have seen motor bikes covered to protect from dirt completely covering taillights. keep things off the back of vehicles keep your taillights visible tow a trailer if you need more space but remember to hook up trailer lights and make sure they work.
Most as unnecessary as the one before it.
First of all, who would buy this crap? That Aero X, why would you want your truck to look like a clown wagon? Is it useful? No! And that Marlon Xplore II Sxs Deck? You have to be kidding me, when I seen the ad for that piece of crap, I thought of the high center of gravity going down the road and people blowing their horns because that guy is going so slow around the curves. And on the interstate, forget it! You’d be lucky to get out of way of people throwing rocks, bottles and what ever else they throw at you. I can see it now, sign says 25 mph curves and you’re going 10 mph with 15 cars behind you. And what’s with the height? Why would you want to go through a residential area with your toy sticking up that high? So people can see how fancy your under carriage is? Ha! Ha! Ha!
several of these prove medical marijuana is not a good idea, smoke racks?
Medical cannnabis isn't an idea it's medical science
What the fuck is 1.7 meters? lol 5.6 feet rounded up.
why the fake british accent oh AI chinese.
Don't play your metric crap in this country.
Absolute garbage ideas
Thank you for the update, TechZone..!! Amazing compilation video of awesome pickup truck inventions..!!
I totally agree. This gave me some good ideas