ATEZR L2 36W LASER The most powerful autofocus laser
2023 ж. 9 Шіл.
8 306 Рет қаралды
You can buy the machine and accessories for it at the following links, use the AWSWOOD coupon
shln.top/mmrjV9Se
www.amazon.com/ATEZR-Laser-En...
In this video I show test of the best laser I have tested so far. ATEZR L2 with a power of up to 36W and a powerful speed of 54000mm/min. In addition, options such as continuing engraving after a power failure, LCD touch screen, AutoFocus, or an additional cross line laser.
It will be a good helper in my carpentry workshop in working with veneer, plywood and wood, it is able to cut a board of 30mm thick.
Woodworking
/ avs_wood
WhatsApp; Viber; Telegram ;Telephone for communication +380687862402
mail - andriusyva@gmail.com #engraver #laser #atezr #woodworking
You can buy the machine and accessories for it at the following links, use the AWSWOOD coupon shln.top/mmrjV9Se www.amazon.com/ATEZR-Laser-En... In this video I show test of the best laser I have tested so far. ATEZR L2 with a power of up to 36W and a powerful speed of 54000mm/min. In addition, options such as continuing engraving after a power failure, LCD touch screen, AutoFocus, or an additional cross line laser. It will be a good helper in my carpentry workshop in working with veneer, plywood and wood, it is able to cut a board of 30mm thick. Woodworking instagram.com/avs_wood/ WhatsApp; Viber; Telegram ;Telephone for communication +380687862402 mail - andriusyva@gmail.com
Really fantastic machine, Andrius! Congrats!!! 😃 Stay safe there with your family! 🖖😊
Thanks 😊
This is wonderful sharing 😊
Thanks 😊
That’s amazing
Thanks 😊
What program did you use to make the cuts and where do you go to find different projects to cut?
LightBurn there are many sites with free files
no one shows a real time engraving speed.. video is always sped up..why?
because it's long and boring...
Cuttning 7mm plywood what was your speed ? 600,700,800,900 mm/m?
6;7;8;9 mm/s
Hi, the video very good.... but i dont think that laser can cut plywood more than 3mm, at least no with 36w
Hello, you didn’t watch the video carefully, it even cuts a 30 mm board
@avswood of course I did , and with more than 50w, you can't even cut 6mm... I asked many time to the sellers and they told me the same... for that, I have my dudes about that cut
@@blacksharksystem1898 i have a an 80w laser and its output is just 10w even it easily cut 3mm so maybe you missed it this was 36w output which means its actual is ~160w.