We used a $12 forged I Hook and an existing 4x6 fence post. Super Easy!
Пікірлер
Thank you. SIMPLE, profound, under all our noses. Natural but not necessarily on our radar. Cheers
@jamieadvocacy5 ай бұрын
There are probably 100+ videos on here for bending rebar.. all of these time consuming, fancy gadgets. This is the best one of all!! Thanks you guys!!
@gringagarbo75082 жыл бұрын
I just spent the day bending 330 bars with this method minus the pipe on top I just used gloves and grabbed the rebar. The pipe trick would of probably saved me a lot of strain 😂😂
@Haha-nv5gm Жыл бұрын
Geez, We should've done a video like this. We were bending all kinds of materials like this for years. Now that we have all the proper bending tools, we bearly use them.
@kwal13622 жыл бұрын
Great stuff ! Keep up the hard work.
@user-ii9gp8jl6x2 ай бұрын
She did that like Beckham.
@BigHackAttack8 ай бұрын
Brilliant!
@chichita92029 ай бұрын
GENIUS! THANK YOU!
@dougmasters4466 Жыл бұрын
You are an inspiring bad ass! Thank you! 😄 💋💋💋
@msthangiam2 жыл бұрын
Awesome! So glad I found this omg!! I came here cause I am planning a large faux rock waterfall and grotto and built a concrete "rock" bench and garden retaining wall but used a wood frame to build the structure. But.... I should really use rebar but have NO idea how to bend it. I thought huh, she's a chick, too! If she can do it so I can I :D I could totally do this myself! Thank you :) Would love to see the finished project.
@discobean543 жыл бұрын
Justine Jackson yay!!!! You rock (pun intended 🤣)! And I love to hear about another woman who loves to get her hands dirty. I totally have dropped the ball on the fountain video! I will make sure to make time to make that this week! I love my fountain! Currently I’m chipping away tile in our master bath! Good times! Good luck on your projects!
@natalielynnebrock82863 жыл бұрын
Genuis. I was changing blades on my riding mower & could not break free the factory nuts. Using a foot long wrench and even hitting with a hammer didn't work, I knew I needed a cheater bar but had nothing that'd fit over the wrench. I looked around my garage till I saw my 16" hitch extender! It was all I needed to crack the bolts loose easily. I'm not even sure why I have an 16" hitch extender but I'll keep as the best breaker bar ever.
@scott1lori28210 ай бұрын
I thought it was a bad preview pic, but it's just bright outside ;) Great tip macguyvering stuff
@TheCornBanana2 жыл бұрын
You go girl!!
@Sdefdom Жыл бұрын
This young lady is STRONG like BULL!!.... You go girl!!!
@wildwestunlimited Жыл бұрын
Thank you so much. I wanted to use rebar for the bottom rails of a Jack Skellington sleigh for Halloween decorations but needed to bend the ends into a circle (somewhat). That looks so Easy!!
@ryanhimel66333 жыл бұрын
RYAN HIMEL great idea!!!! I hope it is as easy for you as it was for me!!!
@natalielynnebrock82863 жыл бұрын
So simple even I can over complicate! Great hack!
@franktekstar49122 жыл бұрын
It is overly complicated, find a hole stick and bend no need for the fence or square lol. Been doing this shit over a decade. Certified ironworker I build towers
@sealyibrahim9159 Жыл бұрын
Well Done! And clever.
@tb89873 жыл бұрын
Thank you so much!
@natalielynnebrock82863 жыл бұрын
Nice !! Thats what I'm going to use 😁😁
@JulianGarcia-yr5dl3 жыл бұрын
Julian Garcia Awesome! I’m glad it helped someone!!!
@natalielynnebrock82863 жыл бұрын
The rock!!!
@jschulte32 жыл бұрын
Thanks, it was great idea. Can you please provide the info of the hook, if possible please share the link to buy.
@123mukeshjaiswal3 жыл бұрын
Mukesh Jaiswal - We literally just went to our local box warehouse store and looked around for a possible solution. Because of that, I do not have link to share unfortunately. But the important thing you need to know (and look for) is it was a FORGED eye hook. That way, it will hold up when putting a lot of pressure on it. Hope that helps!
@natalielynnebrock82863 жыл бұрын
Helpful vid, just have to mention...........Saftey Glasses !
@procrastinator412 жыл бұрын
What a great work out too! 💪
@mom2ladybugs4 жыл бұрын
Yup
@velizarzhelev65523 жыл бұрын
Give me a lever long enough and a fulcrum on which to place it, and I shall move the world
@johnwallis68736 ай бұрын
Get a old hicky bar or a switch hicky . It will make bending a little easier .
@dirty23072 жыл бұрын
Those "hicky" things don't work. Use a watch-a-ma-call-it, instead.
@machomachinmachinmachinmac69102 жыл бұрын
I wonder if heating it up there on the bed would make it easier
@mikebe413 жыл бұрын
Possibly, for sure! But honestly it wasn’t hard so we didn’t even have to go there.
@natalielynnebrock82863 жыл бұрын
What size is the bar? 3/8. Or 1/2 ?
@Joe-jb1jf3 жыл бұрын
Joe Avi - 1/2.... #4 rebar
@natalielynnebrock82863 жыл бұрын
@@natalielynnebrock8286 Thank you so much
@Joe-jb1jf3 жыл бұрын
@@natalielynnebrock8286 ever do it without tools and bend it like Wonder Woman?
@wadecarmen7501 Жыл бұрын
You first, champ.
@snokful7 ай бұрын
@@snokful Don't despair. It's just mansplaining Karen being a Karen.
@haveatyou17 ай бұрын
Lol.. i thought you were doing it by hand.. like me.. with my hand.. i was interested in how many inches that you needed to bend it with your hand.. instead it was a home improvement wideo 😂
@ericmcnellis11903 жыл бұрын
Like way bends it
@chadbartley9242 жыл бұрын
Can you teach my wife please?
@Joe-jb1jf3 жыл бұрын
Joe Avi 😊 Absolutely, just show her the video! She can do it! 💪 👏
@natalielynnebrock82863 жыл бұрын
@@natalielynnebrock8286 i will
@Joe-jb1jf3 жыл бұрын
Be careful ! , You will break the fence and hurt yourself. Wood is no match for steel !
@franckferrante62142 ай бұрын
I use my knee lol
@noahraphael38543 жыл бұрын
eye hook*
@jonchurchill77723 жыл бұрын
You really should just put a bolt into the fence, and bend around the bolt. This way you dont need to thread and unthread the rebar every time.
@erikev3 жыл бұрын
Probably over 5000 bars deep
@noahraphael38543 жыл бұрын
Why not just buy a hickey bar
@marilynwright54372 жыл бұрын
The hick-ma-jicks don't work. A watcha-ma-call-it works better.
@machomachinmachinmachinmac69102 жыл бұрын
Cool trick, but 90 degree bends are not structurally suitable fyi , don't use it for anything critical.
@scimitar43232 жыл бұрын
Obviously. It wasn’t critically hard to bend by hand, was it?
@snokful7 ай бұрын
@@snokful mansplaining Karen strikes again!
@haveatyou17 ай бұрын
If that forges eye snaps because of the bending force (the eyes are only meant for PULLING - tensile [elongation]. More importantly, rebar is notorious for hard and soft spots. There is no standard except for the total tensile strength in a 21' length. If you bend on a unseen hard spot, 90 degree or more will snap: risking very serious injury. No safety glasses. No hard hat...levering right toward the top of her head / face! This is what happens with amateurs who have zero understanding of basic materials and physics.
@allanbruce9473 Жыл бұрын
Lol you tried VERY hard to put her down - but you just come off as neurotic. Good luck with your own over-engineered personal projects.
@snokful7 ай бұрын
@@snokful Lol, you're the resident mansplaining Karen here I see. I didn't see a response to your youtube logic on my your previous comment, mansplaining Karen?
@haveatyou17 ай бұрын
Your inability to converse in the English language is all too self-evident.@@snokful
@allanbruce94737 ай бұрын
Why on earth would you use a square for rebar? Lol just bend and stick it in. Its rebar and nothing is perfect in rebar. Been doing it over 10 years in that time I have never seen a square lol
@sealyibrahim9159 Жыл бұрын
I thought you were actually going to bend it by hand. Misleading title.
@haveatyou13 жыл бұрын
Sorry about that! Not trying to be misleading at all!
@natalielynnebrock82863 жыл бұрын
Ooh Natalie has been mansplained to! It’s by hand rather than by machine - you’d have to have a head full of rocks to think this doesn’t count as a manual method unless you were only here to see someone (specifically a woman) do it like a cartoon gorilla.
@snokful7 ай бұрын
Using leverage is not by hand. If I use a tool by hand to jack up a car doesn't mean I lifted the car lol.
@haveatyou17 ай бұрын
@@snokful if the rebar was 100 foot long and set up in the same way and then at the top a baby pushed it... did the baby bend the rebar by hand? Lol, who has the head full of rocks then?
Thank you. SIMPLE, profound, under all our noses. Natural but not necessarily on our radar. Cheers
There are probably 100+ videos on here for bending rebar.. all of these time consuming, fancy gadgets. This is the best one of all!! Thanks you guys!!
I just spent the day bending 330 bars with this method minus the pipe on top I just used gloves and grabbed the rebar. The pipe trick would of probably saved me a lot of strain 😂😂
Geez, We should've done a video like this. We were bending all kinds of materials like this for years. Now that we have all the proper bending tools, we bearly use them.
Great stuff ! Keep up the hard work.
She did that like Beckham.
Brilliant!
GENIUS! THANK YOU!
You are an inspiring bad ass! Thank you! 😄 💋💋💋
Awesome! So glad I found this omg!! I came here cause I am planning a large faux rock waterfall and grotto and built a concrete "rock" bench and garden retaining wall but used a wood frame to build the structure. But.... I should really use rebar but have NO idea how to bend it. I thought huh, she's a chick, too! If she can do it so I can I :D I could totally do this myself! Thank you :) Would love to see the finished project.
Justine Jackson yay!!!! You rock (pun intended 🤣)! And I love to hear about another woman who loves to get her hands dirty. I totally have dropped the ball on the fountain video! I will make sure to make time to make that this week! I love my fountain! Currently I’m chipping away tile in our master bath! Good times! Good luck on your projects!
Genuis. I was changing blades on my riding mower & could not break free the factory nuts. Using a foot long wrench and even hitting with a hammer didn't work, I knew I needed a cheater bar but had nothing that'd fit over the wrench. I looked around my garage till I saw my 16" hitch extender! It was all I needed to crack the bolts loose easily. I'm not even sure why I have an 16" hitch extender but I'll keep as the best breaker bar ever.
I thought it was a bad preview pic, but it's just bright outside ;) Great tip macguyvering stuff
You go girl!!
This young lady is STRONG like BULL!!.... You go girl!!!
Thank you so much. I wanted to use rebar for the bottom rails of a Jack Skellington sleigh for Halloween decorations but needed to bend the ends into a circle (somewhat). That looks so Easy!!
RYAN HIMEL great idea!!!! I hope it is as easy for you as it was for me!!!
So simple even I can over complicate! Great hack!
It is overly complicated, find a hole stick and bend no need for the fence or square lol. Been doing this shit over a decade. Certified ironworker I build towers
Well Done! And clever.
Thank you so much!
Nice !! Thats what I'm going to use 😁😁
Julian Garcia Awesome! I’m glad it helped someone!!!
The rock!!!
Thanks, it was great idea. Can you please provide the info of the hook, if possible please share the link to buy.
Mukesh Jaiswal - We literally just went to our local box warehouse store and looked around for a possible solution. Because of that, I do not have link to share unfortunately. But the important thing you need to know (and look for) is it was a FORGED eye hook. That way, it will hold up when putting a lot of pressure on it. Hope that helps!
Helpful vid, just have to mention...........Saftey Glasses !
What a great work out too! 💪
Yup
Give me a lever long enough and a fulcrum on which to place it, and I shall move the world
Get a old hicky bar or a switch hicky . It will make bending a little easier .
Those "hicky" things don't work. Use a watch-a-ma-call-it, instead.
I wonder if heating it up there on the bed would make it easier
Possibly, for sure! But honestly it wasn’t hard so we didn’t even have to go there.
What size is the bar? 3/8. Or 1/2 ?
Joe Avi - 1/2.... #4 rebar
@@natalielynnebrock8286 Thank you so much
@@natalielynnebrock8286 ever do it without tools and bend it like Wonder Woman?
You first, champ.
@@snokful Don't despair. It's just mansplaining Karen being a Karen.
Lol.. i thought you were doing it by hand.. like me.. with my hand.. i was interested in how many inches that you needed to bend it with your hand.. instead it was a home improvement wideo 😂
Like way bends it
Can you teach my wife please?
Joe Avi 😊 Absolutely, just show her the video! She can do it! 💪 👏
@@natalielynnebrock8286 i will
Be careful ! , You will break the fence and hurt yourself. Wood is no match for steel !
I use my knee lol
eye hook*
You really should just put a bolt into the fence, and bend around the bolt. This way you dont need to thread and unthread the rebar every time.
Probably over 5000 bars deep
Why not just buy a hickey bar
The hick-ma-jicks don't work. A watcha-ma-call-it works better.
Cool trick, but 90 degree bends are not structurally suitable fyi , don't use it for anything critical.
Obviously. It wasn’t critically hard to bend by hand, was it?
@@snokful mansplaining Karen strikes again!
If that forges eye snaps because of the bending force (the eyes are only meant for PULLING - tensile [elongation]. More importantly, rebar is notorious for hard and soft spots. There is no standard except for the total tensile strength in a 21' length. If you bend on a unseen hard spot, 90 degree or more will snap: risking very serious injury. No safety glasses. No hard hat...levering right toward the top of her head / face! This is what happens with amateurs who have zero understanding of basic materials and physics.
Lol you tried VERY hard to put her down - but you just come off as neurotic. Good luck with your own over-engineered personal projects.
@@snokful Lol, you're the resident mansplaining Karen here I see. I didn't see a response to your youtube logic on my your previous comment, mansplaining Karen?
Your inability to converse in the English language is all too self-evident.@@snokful
Why on earth would you use a square for rebar? Lol just bend and stick it in. Its rebar and nothing is perfect in rebar. Been doing it over 10 years in that time I have never seen a square lol
I thought you were actually going to bend it by hand. Misleading title.
Sorry about that! Not trying to be misleading at all!
Ooh Natalie has been mansplained to! It’s by hand rather than by machine - you’d have to have a head full of rocks to think this doesn’t count as a manual method unless you were only here to see someone (specifically a woman) do it like a cartoon gorilla.
Using leverage is not by hand. If I use a tool by hand to jack up a car doesn't mean I lifted the car lol.
@@snokful if the rebar was 100 foot long and set up in the same way and then at the top a baby pushed it... did the baby bend the rebar by hand? Lol, who has the head full of rocks then?