3-D Painted Lowrider Hood Tin Foil Hack
2021 ж. 17 Қыр.
861 060 Рет қаралды
**Shop for Supplies Here** www.amazon.com/shop/influencer-8869084c?ref=cm_sw_em_r_inf_own_influencer-8869084c_dp_CM3Mp88qT2bQq
LiME LiNE
limeline.bigcartel.com/
In this custom paint tutorial I will show you how I create a 3d Scroll effect using tin foil a press (you will find that press folder on the Amazon link above in the art supply section) Thanks for watching. Hit me up in the comments if you have Questions and don't forget to hit the like and subscribe button 😉
Join this channel to get access to perks:
kzhead.info/tools/myV_hEsbaJCwEtV68q-6Mg.htmljoin
Be sure to check out my other custom paint tutorials.
follow me on these fine social media outlets.
Instagram : @timewarpcustompaint
Tik Tok: @timewarpcustompaint
www.amazon.com/shop/timewarpcustompaint?listId=2DB7SJJOERI31&ref=cm_sw_sm_r_inf_list_pub_timewarpcustompaint__mw_QnOQxW2iD5FIO
Watching you work makes my artistic heart flutter 😯😍🤩🙌🏾
That's such amazing art and technic
Amazing until the first kid at the car show pressed down hard with his finger and then ruins the entire paint job
Link to the leaf stencil for the foil?
@@JoJo-js5ftsame here, I never saw that before. And I can not find it on Amazon. Can you please list the link for that. Thanks
Forget the sweet paint , I’m impressed how you laid down the thin line straight every time . Respect
That is the first thing I noticed !
Thanks I appreciate you watching!!
for real.. just puts it on there like nothing.. I would be stressing for hours and it would not be right lol. That's some skill and practice showing there.
Your tape job in the beginning was better than some of the paint I hired out.
Absolutely! I was going to leave the same comment. The tape is so thin, mind blowing. 🤯
I did some custom painting back in the 70's when lacquer was what we used. Speaking from experience you are phenomenal. It's a great thing to see all the types and techniques out there. Great job.
Thanks for watching
In the 70s, I remember a friend who had amazing custom paintings on his car. It was done by Fat Kats of Florida. It looked like car tattoos.
One thing I know will happen with all the new technology.. The old ways will be lost.
what? i did it in the 30's for italian mafia out of kentucky. not the fried chicken.
This is the type of stuff that made me want to paint... crushing up beer bottles and abalone shells for flake and pearls. Amazing stuff...
Big respect to you. I have been in and out of the custom paint world since the early 80's and I can say this without reservation,you are a total master at it..your taping skills are otherworldly.
Thanks
As a lady who grew up in a body shop I can really appreciate this process! If you want to get a deeper, consistent impression on the foil, use some type of heavy hand roller. Those type scrapbooking embossing folders can be ran through a Big Sizzix die cutting machine. Awesome technique!
Thanks for the tip!!!🙏
@@TimeWarpCustomPaint cool effects but totally wouldn't have thought to use tinfoil or glue on a car does it make the paint come off/rust out? first time seeing how it's done i though 💭 i was air brushed on not glued on and sprayed over sorry sometimes i look at higher end custom painters and wonder if they liked K-6 the most and or art project assignments there teacher 👩🏫 gave them aka cool 😎 glitter ✨ effect but so feels wrong like a hack/janky but i love it 🤓😍not sure how you guys come up with wacky ideas to try but sometimes it works, PS not a body guy but i have met quite a few, im on the other side fixing engines and hoping them up and other go fast bits or working on industrial plant equipment = boring to most people
@@richardprice5978luminium don't rust. And it's under some nice, clear, fiberglass epoxy. It's not going anywhere
This should be framed and hung on the wall! super awesome!! pure talent right there 😍😍😍😍😍
Thanks I appreciate you !!
Agree… I haven’t seen this before
As a retired custom painter and current head painter for a local collision center - Wear a respirator with eyewear and gloves from start to finish on everything,,, even when airbrushing... Isocyanate episodes aren't fun when your lungs say Nope, your face twitches uncontrollably, your vision is hazy & you're sick as a rabies infected dog.!!! Too many custom painters across the country that I've met in person are in poor health after the years . Be safe and lead the way for the newcomers to follow suit.
I have seen a lot of custom paint work but never anything like this, the aluminum foil part is absolutely amazing…
DUDE!!!! I was wicked impressed watching you tape it.... nevermind the paint
Thank you I appreciate watching
I'd love to see you do that, foil and candy for a tooled leather look on a bike😳
I don’t know how I ended up here but when he brought out the embossing folder I got super excited 😆 This is so beyond amazing and beautiful
Thanks for watching
where did you get the folder?@@TimeWarpCustomPaint
This is not a Tutorial. It's an exhibition of Extreme Skills!
Thank you
You know the dude is a pro when they make laying line down that effortless. Flipping work of art beyond that too. I had no idea that's how this process was done but the rest looks attainable, if not without a jinx, easy!
Thank you for watching
Man from a painter to painter you have discovered something truly unique. Hats off to you brother your the man and I can't wait to try this.
I appreciate that brother!!
I was doing custom paint in the 60s , all laquer, 50 to 100 coats. Doing crazy "decoupage" on motorcycle gas tanks. Full candy paint on a corvette for 800 dollars (big money back then! Lol). Man has the equipment and materials changed! The one thing that has impressed most, is the talent and creativity of the artists. You have it in spades! My guess is that would be about a 5k to 8k job and worth every penny! Great presentation too!
Awesome thanks for watching
True greatness is when they make it look so easy that I think I could do it myself (can't fyi)...
I’m 18 and my uncle wants me to help along with customizing his cars & all your videos are helpful thank you !
Awesome
Thanks for sharing all these tricks! That mini hood is badass! I can't wait to attempt this technique.
Right on. Thanks for watching !!
That's pretty cool I always like to see different items incorporated into the auto industry.
Right on!! For sure. Thanks for watching
This man one finger has more talent than my whole life
No man you got it just practice
yeah im gonna have to try this out on my shaved fire wall on my 1971 Monte Carlo!! I should be starting this process in about two weeks so I will let you guys know how I do!! Thanks for the video. It was really straight forward plus you even used the cheap clear coat I was questioning on buying to try out on some projects. Super cool man thanks again!!
Just having the patience to do this type of art is an amazing skill... I would never be able to finish anything remotely as skilled. I just wouldn't be able to focus. That is beautiful art work also, but you knew that already. I'm jealous of the diligence, but also the skill
You could do it!!!!
That's a badass technique!!! Really glad this video suggestion popped up on my TV. I'll be watching all these other videos you posted and checking them out too.
Thank You!!! I appreciate the support!!!
I thought I was watching a CNC machine lay that tape down. Outstanding.
Your a very talented man thank you for sharing and keeping and old art alive! 🤘TEXAS!!!
Can't wait for this tutorial 😍 really want to try applying it to motorcycle tanks
right on man!!
Beautiful job love all the 3d effects
Thank you! Cheers!
That is some smooth fine line tape work. Pulling those curves on the first try. Nice job.
I would not have believed this was possible had I not seen it. Truly amazing results. Awesome video with great information. Thank you for posting it.
Thank you thanks for watching
Always loved your creativity, but this one is above the rest. Your work is interesting and rich with details👌👌
I appreciate that!! Thanks for watching 👊
I bet tin foil from the dollar store would probably be some of the thinnest you're gonna find. I'm gonna give this a shot next week on my daughters power wheels roadster.
I think your right!!
BRO! I was impressed with his taping skills! That hood is the shiznit! So creative and the depth is insane! I would never have guessed you used aluminum foil and that impression maker to make that pattern.
Nice use of embossing folders. I develop products for the arts and crafts market. I have designed hundreds of these over the last 15 years. This design is not one of mine. I would have made the pattern more repeatable. Awesome work!
Oh that’s cool
Absolutely beautiful man! Always a treat watching your videos. As a Certified Welder of 30 years which is good at my trade it’s refreshing to see others in their respective fields which are good at theirs. Great stuff.
I appreciate you brother!!!
MIND. BLOWN. WOW!!!
Thank you I appreciate you watching
Allright listen to this. If you get a classic mustang, and paint the whole car with this, it'd be the sickest mustang there ever was. Mirrors with that tinfoil patter would look dope.
You can name yourself the tape plotter...your shown precission with the green thin take is amazing like a plotter machine.
Haha. Thanks for watching my videos 👊
Super genius
Thanks I appreciate you watching!!
A HACK? Is someone having a laugh. A hack is something that makes everyday tasks easily accomplished. This is absolute mastery 👍🏽
Thanks for watching
That was really nice. I didn't know you actually used foil for that design. That's really cool and interesting.
Absolutely amazing, how long did it take you from start to finish? I imagine an entire car would take a lifetime to complete..
About 15 hours
This is an incredible technique. One question that I have is how do you press down the aluminum foil without disturbing the design though? The videos that you make are really inspiring and informative. Thank you so much! 💯 % 🔥
Once its locked down with clearcoat its good
@@TimeWarpCustomPaint How do I push the aluminum foil down onto the panel without pushing the design flat ? Before locking it down with clear.
How do you press the foil it into the size without disturbing the pressed design?
Can always use a towel as a medium and use a piece of cardboard to flatten it down on the surface so that you do minimal affects to the design.
A hairdryer on high no heat? I'm going to try this on a paint job I'm going to do this month. It'll be on my channel if you're interested. Edit after playing with the foil a bit I found a soft 3" house paint brush works nice to apply pressure to the foil without disturbing the impression.
This looks like such a fun skill to learn. I have no doubt in my mind you're just making it look crazy easy. Absolutely incredible work! EDIT: By "this" I meant specifically the line taping part at the beginning. Everything else is great but for some reason I really got into the line work setup.
Amazingly upper class workmanship
Appreciate that!! Thanks for watching
Thats an awesome effect!! If someone presses on the foil section does it distort the pattern? Or does the clear coat hold it in shape?
The clearcoat lockes it down.
Not if i bang my girlfriebd on it...😁😁😁💞💞💞💕💜💜💜🎉🎉🎆
Question: So no filler on the back of the tinfoil at all? What happens if someone say comes along and presses down on the pattern once your completed? Surely that would create a dent/flat section in the pattern (even through the clearcoat)
Never had a problem the sizing glue and clear locks it in. the foil holds its shape that is if you do it right.
Impressed with the way you put down the tape, super nice work, and talented!!
I appreciate you watching my videos 👊👊
Fancy Lettering.... I love it
really awesome technique! do you happen to know if the foil will peel up over time? I've been wanting to try some painting for so long...hopefully i'll get to try my hand at it in the next year or so!
The clearcoat lockes it down.
@@TimeWarpCustomPaint were would one order the tinfoil molds?
@@daveross1968 check the Amazon link in the description
@@daveross1968 Look up embossing folders on Amazon. They're used for scrapbooking.
It looks awesome, but what about the air that is under the aluminum, will it expand in the sun and if someone pushes against the paint will it crack, collapse?
Nope. The clear locks it in.
Id like to see you do some cool old truck door signs. You always do a great job explaining how to achieve certain looks and techniques.
I appreciate that!!
Gotta say I love that tinfoil in there , amazing look when finished
Thank you! Cheers!
So did you spray any bulldog (adhesion promoter) on the foil cause I’m guessing you can’t scuff the foil once the design is imprinted just wondering if you’d experience any lifting issues etc
Never had any problems
This is a super sick technique 🔥🔥🔥 where do u get the stencil to make the impressions?
www.amazon.com/shop/timewarpcustompaint?listId=2DB7SJJOERI31&ref=cm_sw_sm_r_inf_list_pub_timewarpcustompaint__mw_QnOQxW2iD5FIO
It in the art supplies section
Thanks for the reply! Awesome video
For your next project Juanio!
How does the foil hold up to pressure, will it imprint if leaned on...im sure you k ow what I mean.
Wow... that foil trick looks absolutely amazing!!!
Thanks for watching
Dude!!! This is freakin insane! How do you keep from getting lost or mixed up in your steps. You're a true CRAFTSMAN!!
Beautiful job brother one question where did you get that hood to spray will love to buy one
@finishmaster on Instagram. I sell some that are just a little bit smaller.
@@TimeWarpCustomPaint where can I get one brother do you have a link
limeline.bigcartel.com/product/hood-panel
@@TimeWarpCustomPaint awesome ordering one Thanks
Try the spi euro clear, it’s thick as hell. U have to reduce it 1 up to 3 parts if u want to stretch it, Very very thick stuff good for burying lines
spectacular.... love it! When molding the foil, Do you attempt to line up the leaves so it appears as a seamless design.? Or does it not matter
Do I don’t, but like you can see in the video I’m careful on how hard I press down the edges to prevent a crease. Thanks for watching my videos brother!! 👊
Will be very interesting to see how long lasting this would be in weather conditions going from hot summer to cold winter. As I'm sure there will be air pockets under the foil pattern. Over time it may serperate and flake off.. But no matter what, looks amazing
My God!! Can I get 2-3 clones of you!! I know custom and this is by far the best that I have ever seen! I have been in and around custom paint 55yrs and you top everybody. Kudos and Thank You for the video. And I thought I knew it all!! Keep up the good artistry work and hope you get paid for what you are worth.
Thank you so much I really appreciate you watching my videos
And i cant even get the stickers on my fridge straight.
lol thanks for watching
it looks so good i want to lick it haha
Hahahe 🤪
your taping skills are completely of the hook man...and what a result..that effect makes me feel like I am looking through a one inch thick glass lid of a showcase, at some ancient silver treasure in a museum somewhere...more power to you
Thank you so much I appreciate you watching
brought a tear too my eye, true craftsmanship, much respect!
Thank you I appreciate you watching
Speaking as a professional bodyman I can say this guy has god given talent and it a shame to see him let it go to waste. Please sign on as an apprentice and learn the dos and don’t of paint work. You would make a great living as a professional.
💪💪😁
Im definitely watching this one
right on!!! thanks
@@TimeWarpCustomPaint thats probably one of the most awesome things I've seen to date!!
Very nice... great design, Spanish lowriders pay good money for this type of work. Keep up the good work
I've never seen content like this before...it's mesmerizing. You're very talented!
I appreciate you!! Thanks for watching my videos 🙌🙌
I can see that you love your work. Such craftsmanship two thumbs up.
Thank you very much!
You always impress and come up with even more. Excellent
Thanks for your support 👊👊👊
Dude, you’re a beast. I wish I knew how to paint let alone paint like you.
You can do it
That’s badass!! Thanks for showing how you did that!!
Thanks I appreciate you watching!!
Gorgeous!
Using that embossing folder is so cool! and looks great!
Thank you I appreciate you watching
holy cow I've heard of some strange techniques but I ain't never ever heard of tin foil and that pattern that you stamped in it and that paint job is amazing holy cow
Man your a wizard i am just getting a wrinkled mess when I try
You are a true creator. Mind boggling taping skills.
I appreciate that
That is some really great craftsmanship. I love that 💜 it's not to much, just enough.
Thank you for watching
The purple highlight was inspired! Very nice!
Thanks
I've watched this video probably 10 times and amazed at the work ,....life goals bro,...keep it up, I enjoy your content.
I appreciate your support thanks for watching
I just joined your channel subscription. The knowledge you get from your videos is priceless.
Welcome aboard! thank you for your support
Bro...... your designs are just crazy. Amazing work as always. TWO thumbs up
Appreciate the support buddy👊
I came here from tiktok and you did not disappoint. I think this would be so bad-ass on a motorcycle tank with the tinfoil inlay on the sides, especially if it had a tear drop indentation on the sides to give it that extra depth.
Thanks I appreciate you watching!!
Safi sana. Hongera hakika upo vizuri. Nimeipenda sana. Kazi nzuri
Bad ass paint job. Loving the finished product!
Thanks I appreciate the support
Dude, that is amazing! Nice work! Fascinating to watch!
Glad you enjoyed it
I'd like to see all this closer.😊
Fantastic idea, can’t wait to try it
Right on!! Thanks for watching!!
That is mother-flippin' amazing.. Great work!
Thank you! Cheers!
Just ran across your channel, and I was very impressed with what I saw. You do amazing work, and I’m now subscribed. Thank you for sharing your talent with the world, these things should always be brought out into the light. Thank again!
Thank you I appreciate you watching my videos
That really is the most beautiful thing I’ve seen!!! Incredible work. Best wishes from England
Thanks for watching 🙏😀
The project I want to see next is you doing the hood of my Trailblazer. XD Phenomenal work...just incredible attention to detail here.
Thanks I appreciate you watching!!
Wow!!! Never seen something that badass....awesome work
Thank You!!! I appreciate the support!!!
Love it!
Phenomenal taping skills among many others
Thanks I appreciate the support
UNBELIEVABLE!!! WOW THAT WAS FANTASTIC 😎👍
Glad you enjoyed it
Looks awesome! You have alot of talent
Thank you I appreciate you watching
Looks soooooo good!!!
This was awesome. Love the tin foil tecnique. Found like to se more of that
Awesome! Thank you!
Wow! Awesome detail !
Thanks!