And it even floats!! A HUGE thank you to Chesapeake Light Craft bit.ly/XylaCLC for sponsoring this video, to Nico, Piper, and Charis for helping out so much, and to the Center for Wooden Boats in Seattle for adopting this sailboat!
Chesapeake Light Craft offers week-long build-your-own boatbuilding classes all around the country!! bit.ly/3QyIunu
You can even build a boat at the Center for Wooden Boats. (And visit Next Thursday while you're there!) bit.ly/3DTIGpV#seattle
Learn more about The Center for Wooden Boats in Seattle, WA, and the many programs they offer at bit.ly/44hfzrq
CWB offers a lot of educational programs, including sailing, rowing, and boatbuilding. They also offer boat rentals as well as boatbuilding and woodworking classes.
bit.ly/3qugBSP
bit.ly/3sb3NRQ
bit.ly/3DXArcu
Go to clcboats.com to check out everything they have to offer and www.totalboat.com/BotalToat for all your Epoxy needs! (Yes, they even gave me BotalToat as my affiliate link...)
CLC Lake Union Swift: bit.ly/3OTmqCO
CLC Tenderly Dinghy (this is a non-pro kit version of the one I built here. I HIGHLY recommend choosing this one if you have limited experience): bit.ly/47tILy6
💸 Support me on Patreon:
/ xylafoxlin
Follow me on social media:
📸 Instagram: / xylafoxlin
🐦 Twitter: / xylafoxlin
📘 / xylareifoxlin
Buy my MERCH:
📦 shop.xylafoxlin.com/
💌SEND ME THINGS📦:
Xyla Foxlin
3727 W. Magnolia Blvd. # 174
Burbank, CA 91505
My Amazon Storefront: www.amazon.com/shop/xylafoxlin
Huge thank-you to TotalBoat for supporting my channel!
Use my affiliate link for 5% off your whole purchase :)
www.totalboat.com/BotalToat
TotalBoat Products Used:
⛵️High Performance Epoxy Resin: www.totalboat.com/products/hi...
⛵️Thixo Fast Cure Epoxy Resin: www.totalboat.com/products/th...
⛵️Silica Thickener: www.totalboat.com/products/si...
⛵️ELECTRIC SCISSORS! www.totalboat.com/products/el...
⛵️Wet Edge Topside Paint: www.totalboat.com/products/we...
⛵️Krypton Antifouling Paint: www.totalboat.com/products/kr...
⛵️Lust Marine Spar Varnish: www.totalboat.com/products/kr...
⛵️Halcyon Water-Based Marine Varnish: www.totalboat.com/products/ha...
⛵️Gleam 2.0 Marine Spar Varnish: www.totalboat.com/products/gl...
⛵️Heavy Duty Caulking Gun: www.totalboat.com/products/he...
⛵️Project Mat: www.totalboat.com/products/si...
Be sure to give us all a follow on social media for lots of behind the scenes takes that didn't make the final cut! @xylafoxlin, @clcboats, @nicoisfine, @dmxnlss.pip BotalToat Merch: www.xylafoxlin.com/store
wtf No safety equipment in those promo photos. Kids not even wearing safety glasses.
Do you ever think to yourself "In 100 years, there's gonna be some Martian Power Tool Princess making her own all wooden Low-Earth Orbit rocket shuttle just to donate to the Mount Olympus Rocketry for Kids class"?
Another boat, but not a total boat!
Assembling a wooden "lego-like" kit can be fun. Especially at working scale. Well done!
Absolutely needed some jaws theme music during the sailing.
Patiently waiting for this to become a liveaboard sailing channel once Xyla builds her own yacht...
i can't eat seafood :( i would starve lol
@@xylafoxlinyou don't have to only eat seafood 😂
@@xylafoxlin That makes it harder, but I didn't peg you as one to shy away from a challenge. But whatever you do, make sure you take Nico with you!
@@xylafoxlinSo you'll just need a vegetable garden (tech fueled hydroponics?) and a chicken coop! there are catamaran plans online ;)
@@xylafoxlin If you have a floating greenhouse, does that make all your food sea food? xD
I think this may be the first time I've seen Total Boat actually used on a boat on KZhead
I was thinking the same thing 😂 and of course Xyla has made canoes, but aside from that..!
This whole process was done wrong! Sailboats are supposed to be built in basements!!!
Finally... the total boat.
25:34 boatal tote
The Total Total Boat
Just a note to all boat builders. If you drill or counter sink for screws after the piece has been painted or epoxied you need to treat that wood that's just been exposed with something to water/weather proof it. If you don't that's where the discolorations and delamination of the finish will start. Linseed oil, epoxy, or varnish will all work but you may never get the screw back out with the epoxy or varnish. Boiled linseed oil and similar finishes will need to be applied regularly.
I was going to write the same. If you paint the wood with epoxy or varnish and then drill holes in it later, you need to reseal the exposed wood. And no, silicone caulk won't cut it. I remember reading a scientific paper a few years ago, where several methods and products for sealing wood were compared. Wood samples were treated, fully immersed into water and the weight gain was recorded. The most effective way to seal wood was molten paraffin wax, three coats of epoxy being the close second best option. Molten paraffin of course has several drawbacks, like remelting of the wax and you can't really paint it, so SEVERAL coats of epoxy is actually the only viable option. Traditional methods like products based on linseed oil, acrylic and even polyurethane paints were much inferior. The problem with all this is of course, once water enters through cracks and holes the epoxy coating will trap it inside, the water can't really get out anymore. So the wood needs to be sealed perfectly, which is hard especially on larger, complicated structures. If you want your boat to potentially last a decade or more, all the screws and fasteners better be stainless steel, even when completely embedded in epoxy. For a boat that's out of the water, stored completely dry 95% of the time and isn't expected to last a long time galvanized might work, but considering all the work that goes into such a project just bite the bullet and get the good stuff.
@@kirahund6711 yeah I learned at a young age stainless hardware is pretty much the only way to go with brass a good second place.
@@consaka1 Bronze works too, but that's just inferior to stainless.
@@kirahund6711 yeah bronze/brass is too soft. I've had difficulty with it in the past. I just prefer stainless though I wish even it was stronger.
Great point. Penetrations are where barrier failure or structural deterioration frequently begin and that's not just a "boat" principle. It matters on any substrate where exposure will create change - even just corrosion or oxidation (assuming sound assembly pre penetration and no other existing issues). Modification of a complete boat would be a key example of where a bunch of small failures all begin to contribute.
The Center for Wooden Boats are such good people! I learned to sail with them! You can learn to sail. They teach kids. They teach boatbuilding. They preserve and teach history, and bring old techniques into the future! Their new shop is amazing! They work to make sailing and boats accessible to groups it hasn't been accessible to before! They're truly truly excellent and it's awesome that you've worked with them and passed the boat on to them! Might have just inspired me to renew my pass with them and take Next Thursday out for a sail!
If you do enough volunteer hours with the center for wooden boats, you can earn a free family membership. It could be a simple as clearing the spider webs on a cool winter day. The Center for wooden boats always appreciates the help.
"Are you... prow'd of it?" Xyla gave a very stern look at that joke.
Very good. Take a bow.
You know, I think it's legal to keel-haul people FORE making bad puns. The great things is, AFTer that, no more bad puns.
@@tetedur377Gotta leave the boat in the brine at least a year before keel-hauling otherwise it's not effective.....
She knew she was going to have to spend weeks building a boat with these jokes.
@@vigilantcosmicpenguin8721she absolutely did bahahaha
"I am way to Asian to know what gravy looks like" had me laughing out loud.
I worked on fighter jets in the AF, at the first part where you were twisting wires I was thinking that I was going to send you a pair of safety wire pliers. Until I saw that you were already ontop of it. Absolutely love your videos and look forward to the builds. It really makes this old man really happy to see that pure craftsman/womanship is not going to be lost with the younger generation. Cant wait to see what you build next.
Same, except Navy. I still have a couple of safety wire pliers from AT LEAST the 1970s, which is when I served.
those are the ones that still work better!! waiting for a local A&P to retire and sell theirs haha@@tetedur377
Loved the champagne at the end 🥂
So glad she's doing much better now. Glad seeing her energy back.
Fake, don't believe it
@@khoahatake2017 ?
@@SC-RGX7 She overdosed on hormones and then acted surprised when it caused her problems. Because hoes are stupid like that.
Leo from Sampson Boat Co would likely approve. Jokes aside, this is really cool to see how you can build a boat from a kit like this.
Been following Leo, longer than I've been enjoying Xyla's work. steve
Not a boat from a kit, a toy.
Maya and mainly Aladino from "Sailing Magic Carpet" also assembled/build such a Chesapeake boat for using it as a multi purpose dinghy. Best regards, luck and health in particular.
Probably not, she epoxied the boat together without wetting out the wood first. Leo, on occasion has explained how important it is to wet out wood before epoxy or resin joining.
Five minutes in and you have the hull assembled, and I thought "Well, they're halfway done already!" Boy, there's a lot involved in building a boat.
Sanding is the bane of everyone's existence.
I loved this video, and all of your videos. I'm an old broke-down and disabled machinist. I'm now unable to make/build things. I get to "make" things vicariously through your vids, well, and the vids of other KZheadrs too. I so much enjoy watching your process. When you launched Next Thursday I seemed to get a bunch of dust in my eyes, or perhaps an allergy attack. It wasn't until the video was over till I managed to clear my eyes. Thanks Xyla, for bringing this old man joy. I'm looking forward to the next mischief you get yourself into. John
Shucks, I might have posted this. Great comment 👍 (Damn, just got something in my eyes 😢)
The screws going into the skeg from the inside will penetrate the epoxy barrier and be a source of rot as water gets in there. The Gougon recommendation is to drill an enlarged hole, fill with epoxy and then re-drill for screws once hardened. Gougeon brothers wrote the seminal work for wood and epoxy boat construction. (this goes for all the other screws as well of course) There are epoxies with UV blockers in the formula to protect against UV degradation of the epoxy. UV from the sun eats epoxy. Even here at 63 degrees North this is an issue, and I re-glassed my CLC Chesapeake 18 three years ago because I messed this up and the glass started to turn yellow before delaminating 🙂 I have never seen a CLC kit go together before. It was really interesting. Those pre-cut joints sure made things easier as there were no need for scarfing, but I wonder how they do when the plywood is stressed a lot as in some of their kayak kits. Perhaps they add a layer of glass on each side when gluing?
Anything that has exposed epoxy should be sanded and given a coat of poly. The poly will take a beating, but, much simpler to just repoly it now and then than to sand to virgin epoxy and then build it back up. Plus it looks nice.
Need a crossover episode with sailinguma. 😊
"Next Thursday" is a fine name for a boat!
When I was a kid, my Dad designed and built a bunch of sailboats, mostly for my brother who was a sailing kid. Most were plywood and fibreglass, much like yours, but he did move on to fibreglass and foam composite. The latter were very fast boats, and did help my brother to be overall winner in at least one season of sailing. But my favourite were the wooden boats, they just looked so good in full clear varnish. It was either the second boat or perhaps they renamed the first one after the first season, but it was called "One Slip" partially after the Pink Floyd song, but also because he made the deck out of too thin plywood, and my brother kept slipping and putting his knee through the deck, so it ended up covered in plywood patches. Anyway, you did a great job with your boat. I'm certain it will inspire many a young sailor to love the sport, let alone learn how to sail. It was fun watching you build it, even if it wasn't always fun building it for you. But most of all, thanks for the trip down memory lane.
Dang, not sure I could tackle one of those pro-level kits, but you've definitely got me thinking about ordering a simpler one as a summer project with kids in a few years, looks like so much fun!
Nico the absolute legend
the center for wooden boats is awesome! thank you for supporting the seattle community :) :)
Why is anti-fouling not good if you're going to have the boat out of the water? Is it less resistant to scrapes than the paint you ended up with? (Also, I felt so sorry for you guys having to strip it all off and repaint it!)
If it's a biocide antifouling, I suspect that they don't want kids to touch it. Also, you cant paint over it with normal paint only antifouling, so they would have to remove it if they want the maintenance to be an educational activity. finally, some regions don't allow it to protect the wildlife. Otherwise, there's nothing wrong with having antifouling as a top coat for the underwater part.
@@grieske thanks!
Also to add antifouling is generally a softer finish so you are correct in guessing that its less resistant to scuffs and scrapes which of course isnt ideal when its being pulled from the water often.
@@grieskewow. Thanks. Great answer.
anti-fouling paint is great for metal boats, not so great for wooden. That boat will never see salt water so not necessary for anti-fouling paint.
How long do you guys think it will be before Xyla builds her own plane?
de Havilland Mosquito, a WOODEN world war 2 plane. original plans likely available online. on completion, sell it for about $5 million, even if it were painted purple.
She should get her hands on a Sonex, or an rv-12 kit! Aside from being enjoyable to watch, it would be a huge inspiration to a new generation of pilots!
next friday ;)
One colab with Peter Stipol away
Give her a year and a half.
For work, a few months ago, we were required to install fire-rated caulking. It was only provided in the horrible "sausage" packaging, which won't with with a standard call caulk gun, only with a specialty caulk gun designed to be compatible. I saved my company a few hundred dollars on those specialty tools by getting a few cupcake decorating/filling kits at my local Walmart. Cut the end off the sausage caulk, stuff it into the frosting bag with the narrow tip, and ziptie the open end tightly, then "frost" the fire barrier locations. It worked amazingly, and passed all QA inspections.
this is most elaborate stitched sailboat construction I've seen.
Once again Xyla proves how much of a badass she is! Nice Job!
I just can't believe how much work something like this is! Not only the ship itself but the filming and editing as well. Well done.
Thank you for support the youth of the PNW! ❤ resident of Rochester Wa.
The patience necessary to build half the stuff you make just amazes me. I would always be looking for shortcuts to the point where I'd drive myself and everyone around me crazy..
Shes like a mini Amazon, as in Swallows and Amazons: White lug sail, centre board, and ever so neat. 😊 Xyla, you're an inspiration to us all and I'm glad to be able to share your videos with my daughters, to show them how unstoppable a girl can be. Thank you!!
Love that. I was a member of the Center for wooden boats for many years when I lived in Seattle. They are such an awesome organization. So glad you built them a boat.
That was one hell of a build to end up giving away.
"Next Thursday." Perfect! Beautiful boat, but would have gone with a lighter shade of purple...like boysenberry! Thanks so much for sharing, very fun to watch!
Botal Sail Toat
wonder if total boat would do a limited run of your purple in botal toat labelled cans? but as always your out there inspiring youngsters to just go for it
The irony of getting sandbags from the fire department that were meant to be used for protecting houses against flooding and using them to build a boat is amazing.
"A person builds the best of themself into a boat-builds many of the unconscious memories of his ancestors.”- John Steinbeck
What I'm learning is that the Titanic probably sunk because they didn't use enough epoxy.
I love your videos. Your enthusiasm comes through the screen. I especially like it when you go through problem solving issues that come up during each project.
I custom built my 12ft mixer 2 sailing dinghy from plans for trailer sailing and 100+ mile solo expeditions at 15yo, and can confirm it was one of the best summers of my entire life
Building boats with friends should definitely be a new YT genre! It looks approachable and super fun.
You might be interested in the project from Six Point Wood Works, though he's building it himself - it's a personal trawler yacht, it's quite a big project to do by hand!
So cool!! Now I can show my friends why I was getting excited about a boat (THIS BOAT) when we were out for a walk!! ⛵️ Love thissssss!! Also, Foxlin Fiberglassing School, or FFS…I like it. 😹
Shouldn't all the drilled holes also be sealed to stop moisture from entering the wood?
yup, negated all the work of the sealing of the wood, in fact with unsealed screw holes like that it's actually worse because she sealed the rest of the wood since moisture that goes in the screw holes will not be able to escape the wood and be trapped causing accelerated rotting vs if the wood around the holes was able to dry. Those screw holes will be the points it rots from.
you are correct, wetting out fiberglass is waaay more satisfying than epoxy pours :)
"Never own a wooden boat. It will break your pocketbook and your heart, and make you cry." Captain Fatty Arbuckle
You’re freekin awesome!!! Thanks for doing all the think I dream about doing!
Being a retired QE processes have been a big portion of my life. I have watched dozens of CLC project builds. This one is certainly the best. How you bring your education and training into your projects is so gratifying. This makes watching your builds so much fun. Your quirky, off-the-shelf humor adds a lot, too. Thanks for sharing your passion.
Xyla is a national treasure. I love her.
I loved this. Had laughs and warm fuzzies all the way through the video. Next Thursday is an awesome looking craft. You guys should be incredibly proud of her ❤🎉 P. S. I love the purple accents
Super fun video and a fantastic little boat! Love the purple accents!
9 seconds in and it's already a boat... fastest build evar 😎
"Next Thursday" will bring the joy of sailing to many people for many years to come. With some TLC, that boat will last a generation or two.
woah, this just came out! Cant wait to watch the video, your content is amazing and you're so inspiring! Keep up the good work!
I wasn't expecting a Lyla Foxlin - Cleetus McFarland crossover! (music at 22:30) 😂
Was about comment rockin‘ Cleetus vibes for the montage!
When does the jet boat engine get installed?
If you need tools for sanding - 3D printing is your good friend. I make rotating sander heads for use with drill (wrap using thin sand strip from a belt), or shaped bases for my block sander etc. Glue on sandpaper and off you go. You can even incorporate dust extraction if you want :). Think custom versions of old style block sander you'd make from wood.
This was my favorite build of all of your builds Xyla. I love sailboats and sailing. Next you should combine your boat building skills and the new tiny home trend and design and build a live aboard yacht.
I wonder if it’d be a nightmare to use some kind of expanding foam (like they use to seal and insulate homes) in those flotation cells instead of the cut foam sheet? It might fill the space more fully and not allow any water in.
That's definitely an acceptable technique. It can be tough if you don't have experience with it because over-filling can deform (or burst) the hull. Either option has down sides.
I wanted to! CWB specifically requested I use the pink stuff in case the boat gets borked and they have to pull the foam out and replace it.
@@xylafoxlin that’s a great reason! Maybe an idea for them: use plastic bags to contain the foam? I’ve had a few things sent to me recently that had foam that was contained in bags as it expanded - conformed to the box and contents, and was easily removed. Maybe if you had another Thursday. 😜 Thanks for these videos. I’ve been wanting to work with fiberglass for a while, and I’ve watched and rewatched your videos.
@@toastrecon Your probably thinking of something like the Instapak products? A ready to use bag that you activate, then drop in the shipping box with whatever your packing? The foam inside it expands to shape around your item then sets. You end up with really nice packing foam moulded around your item. kzhead.info/sun/g9KEcq1_rWJ5pI0/bejne.html
@@coffeegonewrong Those must be it! That's pretty cool, I didn't know that it was so "accessible".
A handsome little craft. The copper stitching served the same role as Clecos on an aluminum aircraft. Electric scissors are clearly a good idea. I've seen videos on carbon fibre and sheet-metal work where they were highly praised. (Probably a more robust version than the cloth-cutting ones.)
tip that work for me - fabricate a stand or jig to hold the boat at a convenient level on its side it's so easy to send it's like you're resting and your weight holds the sander there's no bending over really or very little. I'm 6'7 so a comfortable table for me is 42 in high so the boat is quite up in the air hyphen and only I can really sand on it.
I'm with you on that, Xyla. Glassing is just as satisfying as pouring epoxy. Also, love the choice of scoring the video with Biddy Sullivan. One of my favorites.
Bit of geographic synergy there: The kit is called the Lake Union Swift, and the Center for Wooden Boats is on Lake Union. Obviously, Chesapeake made this one specifically to honor the CWB, but the video didn't overtly mention it. That launch and maiden sail was on the lake it was designed for.
You really have to build an airplane next!
Watching Xyla take a sip of the champagne with the bright water in the back and the beautiful finished boat beside her is like the visual representation of confident triumph, and I love it.
50 years ago my woodwork teacher built a canoe or kayak out of marine ply using the glue and stitch method. This was a response to the Venture scouts, who had hired moulds and were building fiberglass ones. When he did the stitching, Mr Vale cut little grooves so the copper wire was under the surface. Then he filled with epoxy and sanded it all smooth. The ply was mahogany or dark teak faced and it looked beautiful in the sunlight through the big workshop windows, it shone. Then he painted it blue. Odd man. I later taught woodwork there. I bet there are similar tales told about me.
New boat sanding technique - sling a hammock bow to stern and sand underslung in the hammock. it might be difficult to get in, but if you do it close enough to the boat, it should be a rather comfortable sanding experience, dare I say [dare, dare] a superior or super sanding one?
Always going above and beyond for others. Shout out to Nico, Piper and Charis! You know you have friends for life when.... :-) I hope Next Thursday has awesome adventures..
Remember folks: remember to always build your sailboat during a flood!
Xyla, Your videos make me smile 😋. Keep the aspidistra flying! God bless, Paul
All boat building requires a 10x time adjustment. Nice build!
You just can’t not love Xyla’s background thoughts 😆
Totally agree that fibre glassing is way more satisfying.
Watching this it makes me remember my Grandfather who had built his own sailboat (in the middle of the Canadian prairies) and sailed it from Victoria to Hawaii and back. Thank you for this!
All the clamps are back! Im so happy!
Wow! What an epic project! So much tedious work. Assembling the wood into a boat shaped structure is the easy bit!
That is a lot of clamps :-)
A beautiful story of friendship and craftsmanship 🥰🥰😊😊
I stopped at Chesapeake Light Craft this afternoon and talked them about sponsoring you to build one of their kayaks. Much less expensive and all you need is a paddle.
freaking awesome build, loved the joy in your face while sailing.
Great build video! Given the amount of sanding you do - you should totally find a way for Mirka to sponsor your channel! A Mirka sander will let you sand without any protection since it sucks the material out through the sander itself. IT's expensive, but sooooooo worth it!
Self bailing fixtures are a good idea for that lower well area. When you decide to make your own small wooden boat.
Thank you Xyla for the amazing boat!! We have loved using it in our youth programs and it is such a fun boat to teach teens on We'd love to have you back at CWB when you're in Seattle next! I loveeeeee the custom purple!
Your true beauty is your heart!!!
You are so much fun to watch and listen to!
Ok, the grocery bag bib may be a stroke of genius!
I found an interesting hack to cut that sometimes helps for cutting woven composites. If you cut in 1/2-1" with scissors, then take pliers, or your fingers, and pull 1 strand of the material out, which can be a bit challenging, you have a marker across the width to cut on. It can leave a fuzzier edge, which can be annoying.
Propping the boat up on its side makes sanding easier so you don't hurt your back as much... for glassing you still need it flat (on the keel) so the epoxy doesn't puddle where you don't want it.
So...much...work. And it's gorgeous.
Y'all are so absolutely delightful!
Jasper Fforde has written an entire book series about this boat. 😁
Not just floats; sails, too! Whee!
hey ! clamp a large wheel at each end of the boat , so you can rotate it to facilitate sanding all those different angles in an upright manner , you can raise and lower the wheels as needed.
This brought tears to my eyes, I built a wooden racing dingy with my Dad when I was 17, some of the best memories of my life just came flooding back. Thank you. She is beautiful. You should all be proud, WELL DONE! ❤
"I'm building a boat... Well... another boat !" 😂
A FABULOUS BUILD!!!
"my 20's are just sanded away" Ha! Welcome to the club! Also, one can never have too many clamps!
Watching Xyla build a sailboat. Suddenly hear Cleetus build theme. Half expect to see a massive LS outboard bolted to the transom...
Nicely done. Thanks for making it known that such kid exist!
Solid name for a boat, especially with the backstory
When I was 13, my dad and I built two wooden boats in one summer and took em both to the Lake Union Wooden Boat Festival (or whatever it was called then) there at center for wooden boats. I built a stitch and glue 12 foot rowing skiff, and my dad build a 22 foot long two person recreational rowing shell (much wider than a traditional shell) with a sliding seat. So much filleting and sanding.. so so very much. (I'd say enough for a lifetime, except I spent a summer doing nothing but sanding the inside of wooden speedboats near Lake Winnipesaukee in NH a few years later. ) Unfortunately it looks like the Wooden Boat Festival died with covid (nothing since 2019) but it featured (among other things) two row boat races. One for small boats (which I won in my very light and slippery 12ft skiff) and another for "big boats" which were generally pretty fat and heavy boats. I went out in my dad's 22ft shell by myself and dominated the field despite it being quite hard to turn. Fond memories. The shell is still around, but someone stole my skiff.
Is this a "Total Boat" project?? Pun intended - LOL!! Many years ago in the 60's when I was in high school I worked for my whole high school career at a marina on the Ohio River near Pittsburgh, Best job I ever had!! I even built and restored a wrecked racing hydroplane for my own racing use!! One of my jobs was repairing wooden water craft such as Chris Crafts etc for our dock renters. Remove caulking from the planking, replace it then fill the boat with water to swell the planking so it wouldn't sink when you put it in the river! No epoxy back in those days!! Just marine Spar varnish. I even got the chance to help restore a US WWII plywood PT boat and rebuild it's engines. It got converted into personal cabin cruiser. Fun job and many great memories!! Nice work guys! Xyla, ya got a great heart girl.