KZhead
Музыка

How to Use Everything in MASCHINE MK3, Beat Making Masterclass (Part 1) | Native Instruments

Native Instruments
2024 ж. 22 Мам.
451 277 Рет қаралды
Жүктеу

Watch as Native Instruments’ MASCHINE guru Boris Mezga walks you through our MASCHINE Masterclass. By the end of this tutorial, you’ll understand the most important controls on your MASCHINE hardware, how to arrange your ideas in the MASCHINE software, and much more.
Discover MASCHINE: www.native-instruments.com/pr...
MASCHINE MK3 Manual: www.native-instruments.com/ni...
Native Instruments Community: community.native-instruments....
Dive into parts 2 and 3 of the MASCHINE masterclass:
• How to Use Everything ...
• How to Use Everything ...
CHAPTER 1: GETTING STARTED
Learn how to download Native Access, register your MASCHINE MK3, download MASCHINE software from the Factory Library, connect your MASCHINE, set your preferences, and troubleshoot installation issues.
CHAPTER 2: THE MASCHINE CONTROLLER
Learn about every button and knob on the MASCHINE hardware, including the velocity-sensitive pads, group buttons, and encoder knobs.
CHAPTER 3: THE MASCHINE LIBRARY
Learn how to browse sounds, load existing projects from the library, start a new project, load and erase sounds, layer loops and one shots, and save samples to your user library.
CHAPTER 4: CREATING RHYTHMS
Learn how to use the Metronome, Auto-Length, Undo/Redo, Clear, Quantize, Swing, Pattern, and Note Repeat functions. For more, check out the Ultimate MASCHINE Note Editing Masterclass: • Ultimate Maschine+/MK3...
CHAPTER 5: CREATE MELODIES AND CHORDS
Learn how to activate keyboard mode in MASCHINE, use an external MIDI keyboard with your MASCHINE setup, change scales in Keyboard mode, add harmonies with Chords mode, transpose chords, and use the Note Repeat arpeggiator function. For more, check out the MASCHINE Chords Mode Masterclass: • Maschine: Chords Mode ...
00:00 - Introduction
01:22 - Locating the Browser, Pattern Editor, Ideas, Mixer, and Master Level Fader
02:56 - Loading samples from your computer to the MASCHINE pads
03:44 - Exporting files from MASCHINE to your DAW
04:26 - CHAPTER 1: GETTING STARTED
04:44 - Downloading Native Access and registering MASCHINE
05:48 - Understanding the back of the MASCHINE MK3 unit
06:28 - Setting your preferences
07:42 - Troubleshooting installation issues
08:35 - CHAPTER 2: THE MASCHINE CONTROLLER
08:42 - Understanding and adjusting the 16 velocity-sensitive pads
09:55 - Changing the pad colors
10:36 - Understanding the 8 group buttons
11:43 - Understanding the capacitive encoder knobs
13:14 - Understanding the Play and Record section
13:41 - Understanding the Select, Solo, and Mute buttons
14:37 - Silently selecting sounds
15:12 - Understanding the quick edit section
15:39 - Understanding the touch strip
16:58 - Changing the behavior of function menus
17:37 - CHAPTER 3: THE MASCHINE LIBRARY
19:02 - Browsing sounds on the hardware
19:52 - Loading up existing projects from the library
21:33 - Starting a new project
23:00 - Erasing sounds within a kit
24:22 - Loading a Sound in MASCHINE
25:16 - How to layer Loops
26:41 - How to use One Shot samples
28:29 - How to save samples to your own user library
29:02 - CHAPTER 4: CREATING RHYTHMS
29:11 - How to use the Metronome
31:22 - Using the Auto-Length feature
31:54 - How to start a recording with a count-in
32:30 - How to use the Undo, Redo, Step Undo, and Step Redo functions
33:11 - How to use the Clear function
34:34 - Using the Quantize function
36:42 - Activating the Swing function
37:21 - Using the Pattern Menu
39:54 - Using the Note Repeat function
41:19 - Pattern recap
42:51 - Using the Arranger view
43:15 - How to access these functions in the MASCHINE software
44:44 - CHAPTER 5: CREATE MELODIES AND CHORDS
44:55 - Activating Keyboard mode in MASCHINE
46:12 - Using an external MIDI keyboard with your MASCHINE setup
47:09 - Changing scales in Keyboard mode
47:56 - Adding harmonies with Chords mode
49:14 - Using Chord sets
49:46 - Transposing Chords
50:07 - Using the Note Repeat arpeggiator function
#NativeInstruments #Maschine #MaschinePlus
Subscribe to our channel:
kzhead.info...
For 25+ years, Native Instruments has been at the heart of musical innovation. We’ve created communities, pushed technological boundaries, and opened new creative horizons for amateurs and professionals alike. Today, driven by our mission to make music creation more inclusive and accessible, NI’s hardware, software, and services including MASCHINE, TRAKTOR, and KOMPLETE bundles, provide fully-integrated solutions for creators of all genres and experience levels.
Visit our website: www.native-instruments.com/?u...

Пікірлер

  • Check out Part 2 for more MASCHINE tips and tricks: kzhead.info/sun/o9Z-pcxph2hjfYU/bejne.html

    @NativeInstruments@NativeInstruments Жыл бұрын

    • Danke! verrry helpful yes indeedee! ;)

      @bdejong182@bdejong182 Жыл бұрын

    • sir ..can we create live loop with external input like boss rc 505 loop stations ???

      @hirengoswamimk3@hirengoswamimk3 Жыл бұрын

    • Sure, Maschine MK3 has a looper! Check out our video tutorials to get an overview of the feature 👉 bit.ly/2XFP6Bj

      @NativeInstruments@NativeInstruments Жыл бұрын

    • @@NativeInstruments thanks sir for replying...

      @hirengoswamimk3@hirengoswamimk3 Жыл бұрын

    • 0

      @galvanizingtechniques1111@galvanizingtechniques1111 Жыл бұрын

  • You guys started out using my demo song in the tutorial. I really was not expecting to hear that. WOW, Amazing!

    @beatkultr@beatkultr Жыл бұрын

    • Very cool, I bet you're humbled and honored

      @klaytonvonkluge4905@klaytonvonkluge49056 ай бұрын

    • @@klaytonvonkluge4905 I try to be

      @beatkultr@beatkultr6 ай бұрын

    • Congrats homie!

      @TheBlackJewelz@TheBlackJewelz6 ай бұрын

    • No permission you suppose to claim copyright infringement if you are the owner of the content,

      @paserpase2870@paserpase28704 ай бұрын

  • Been waiting 5 years for an official tutorial video. Finally and thanks

    @812JB@812JB Жыл бұрын

    • Sorry we're a bit late to the party 😇

      @NativeInstruments@NativeInstruments Жыл бұрын

  • This was sorely needed, the official tutorials are always clear and consise. Glad there's an upto date one now that covers everything.

    @moomba0@moomba0 Жыл бұрын

    • @NativeInstruments@NativeInstruments Жыл бұрын

    • @@NativeInstruments ☝️that emoji looks like two chics are squatting down halfway while leaning on each others back with pants pulled down and squirting 🤷‍♂️

      @rafon.@rafon. Жыл бұрын

    • @@NativeInstruments ok one question.if we have for example an arturia minilab mk2 alongside with the maschine hardware.and activate the keyboard or chords mode.does the midi data goes into the maschine grid if we perform from the minilab/m32 etc?😁 edit: i own the mikro mk3 but also a minilab mk2 and i am curious if me or everyone actually can take the advantage of the scales and chords feature inside of the maschine.

      @rac06oon@rac06oon Жыл бұрын

    • I agree and Boris is an excellent teacher

      @DoctorJRx@DoctorJRx Жыл бұрын

    • can we create live loop like boss rc 505 loop station in mk3??

      @hirengoswamimk3@hirengoswamimk3 Жыл бұрын

  • To have an actual tutorial without stupid jump cuts, weird sound effects, unnecessary crap music with a long ass intro, stupid faces being made. As soon as I click into those type of videos I click out of them so fast when I notice stupidity happening. Now this tutorial is professional, clear and right to the point. Thank God for people like you! ✌🏻

    @gtamediaproductions1@gtamediaproductions1 Жыл бұрын

    • So true - I found the online manual daunting - this is amazing

      @FinelyAgedGenX1969@FinelyAgedGenX1969Ай бұрын

  • What a pleasant surprise. Can’t wait for part 2. Nothing beats tutorials from the actual product makers.

    @palimo3653@palimo3653 Жыл бұрын

  • I’m here to be schooled. I have a Maschine+ that has been sitting for a bit. I’m waiting to learn how to use this from A to Z!

    @skillmaticwayne@skillmaticwayne Жыл бұрын

  • Everyone: I like Native Instruments! But that whole maschine thing is very hard to understand! Native instruments (13 years later): let‘s make a tutorial where we actually explain how that thing works! - Genius

    @LABlukas@LABlukas Жыл бұрын

  • Please ! More OFFICIAL TUTORIALS !! Thanks a Lot !!

    @fahimfaheem6052@fahimfaheem6052 Жыл бұрын

  • So long we haven't seen you. Great come back. Please more of this from him.

    @mimidhof2179@mimidhof2179 Жыл бұрын

  • MASCHINE ! what took you SO LONG, Native Instruments?!? Great job, thanks to Boris and all of youz guyz

    @kvkcoils8011@kvkcoils8011 Жыл бұрын

  • BORIS IS BACK ..!! THANK YOU FOR 🙏 THE TIPS ..!!

    @baddude6102@baddude6102 Жыл бұрын

  • Finally an official tutorial

    @RickyTehra@RickyTehra Жыл бұрын

    • The real deal 🚀

      @NativeInstruments@NativeInstruments Жыл бұрын

    • Please keep 'em comin' like you used to back in a day

      @rafon.@rafon. Жыл бұрын

  • This was a long awaited official tutorial. I've been using MK3 for 4 years now and still learning some crazy new stuff thanks to this video. Much appreciated :)

    @xearzop@xearzop Жыл бұрын

    • We're glad to hear that Berkin!

      @NativeInstruments@NativeInstruments Жыл бұрын

    • Can this device be used as a keyboard? Let's say I take it with me to my night shift work . Can I compose music on it? Thanks.

      @Rustam3469@Rustam34694 ай бұрын

    • Yes you can. Maschine MK3 works like a controller designed for music production; although it doesn't serve as a standalone keyboard, it can seamlessly integrate with your computer or laptop to facilitate music composition during your night shifts. @@Rustam3469

      @xearzop@xearzop4 ай бұрын

  • Great tut.

    @sekaabrantie@sekaabrantie Жыл бұрын

  • Excellent vid required viewing for all Maschine newbies this tutorial is the best yet.

    @thehomerecordingstudiozone1868@thehomerecordingstudiozone1868 Жыл бұрын

  • This movie is a real gem. I have been using Maschine for some months, I have made through many tutorials, but have never found so comprehensive introduction. I have learned new things in every chapter - especially the things that need to press a button longer, press a shift - therefore are not visible at first glance. After the movie the Maschine seems not only the versatile tool (it already did), but also very easy-to-use. Such everyday tips making life easier are the things we all need. Thank you very much, you are doing excellent job. I am looking forward to seeing next part. P.S. Thank you for mentioning Jef Gibbons's videos - I am a huge fan, his masterclasses are also invaluable.

    @piotrrusk@piotrrusk Жыл бұрын

    • We're super glad it helped you get in the flow, thank you Piotrus for the amazing feedback 🙌

      @NativeInstruments@NativeInstruments Жыл бұрын

    • Is there a tutorial on how to load/import a track from a Daw, let's say Mpc beats or studio one INTO The Maschine as a track,scene or pattern so I can lay Guitar & other layers?

      @robbythunder6386@robbythunder638610 ай бұрын

  • Boris ! my man ! Comfort fit for president !

    @hxzelmusic@hxzelmusic Жыл бұрын

  • This was long overdue. Thank you

    @reinoldg@reinoldg Жыл бұрын

  • Now that I likes! Can we please get a performance record mode please? Great tutorial by the way! The host was great!

    @EricRabb@EricRabb Жыл бұрын

    • Thank you so much! And note taken!

      @NativeInstruments@NativeInstruments Жыл бұрын

    • @@NativeInstruments Yeeeees, I would love to be able to connect it to my DAW and just record all that I am playing. Please Please, make it easy for us to create a full song.

      @magnuseriksson8081@magnuseriksson8081 Жыл бұрын

  • That was probably the most thorough intro to Maschine I've seen yet on the basics of getting started. I'm pretty familiar with Maschine but every now and then I watch these to learn something new I've missed. I picked up a few things from this tutorial and I thank you bro.

    @wordizbonproductions3228@wordizbonproductions3228 Жыл бұрын

  • Really helpful overview. Jef’s Maschine videos are a great shout out too! He takes a deep dive into a lot of Maschine features.

    @robertshamansky1912@robertshamansky1912 Жыл бұрын

  • Providing this much clear and direct tutelage for free, is why I just picked up an MK3 (and upgraded Komplete after years away). Thank you, Native Instruments (and Boris!) for providing this series.

    @ZDanielPhoenix@ZDanielPhoenix Жыл бұрын

  • u are a dr sample and dr groove BOSS in one! ) thanks m8! now new times arrived with mk3 and machine jam!!! salute NI!

    @bdejong182@bdejong182 Жыл бұрын

  • Thanks Boris.... 😘👍

    @woofer8395@woofer8395 Жыл бұрын

  • congratulations I'm a maschine user since mk1 and if something has hurt me to see from then until now it's the amount of these instruments in the second-hand markets I had the opportunity to sell several maschine and to buy used and if something is clear to me it is many of those vendors was because they got lost in the use of this machine, many of them did not know how to use it, there are many videos here on this platform but few that teach well, many are rehashes of others. the important thing is that now it is done by YOUR, the creators!!! of such an incredible MUSICAL INSTRUMENT, DAW, SAMPLER, MPC, ETC. Thank you Native for such a wonderful video, we hope to see something like this from reaktor, Kontak, etc soon. I understand that selling course videos is lucrative and I think it's excellent, but you should still be the baton of them. Bless 🙌🙌🙌🙌🙌🙌🙌🙌🙌

    @mauradass@mauradass Жыл бұрын

  • Nice One thanks. Please continue the development for M1 native support for N.I. Software.

    @sinesoundmukke4359@sinesoundmukke4359 Жыл бұрын

  • wow! at least we made it! the official masterclass. please more from this series, like how to build a track from start to finish only with Maschine!

    @yoikotorecords56@yoikotorecords56 Жыл бұрын

    • Thanks for the feedback!

      @NativeInstruments@NativeInstruments Жыл бұрын

    • A full track with a vocal that goes across the whole song. and how you mix it down and transfer it to your preferred DAW

      @magnuseriksson8081@magnuseriksson8081 Жыл бұрын

  • Super tutorial, thanks!

    @wolfganglahmann1933@wolfganglahmann1933 Жыл бұрын

  • Ah! Just about to set this up and start using it. Thanks be to Gid for this video!!!!!

    @guitargirlutube@guitargirlutube Жыл бұрын

  • MORE BORIS TUTORIALS!!!!!!

    @WillieCarpenter17@WillieCarpenter17 Жыл бұрын

  • BORIS!!!!!! This is amazing!

    @ggellner@ggellner Жыл бұрын

  • Been waiting years for this

    @jasonmaggard3829@jasonmaggard3829 Жыл бұрын

    • I just did! Thank you 🙏🏻

      @jasonmaggard3829@jasonmaggard3829 Жыл бұрын

  • Thanks so much for doing this, this is so great!!! Boris is an excellent Maschine guide, his pacing is superb, he anticipates the questions I'm thinking, and uses excellent, usable examples. Nice shout out to Jef Gibbons, too, his deep dives and his artistry are top notch!

    @richrochelle6996@richrochelle6996 Жыл бұрын

  • Subscribed!!! Awesome video 👍🏼

    @gohardrecords875@gohardrecords875 Жыл бұрын

  • Really love this masterclass, Boris explains very well !

    @1BorisRoss@1BorisRoss Жыл бұрын

  • I have maschine + and am so grateful for these videos. I was feeling discouraged like maybe it wasn’t for me and I should sell it, and maybe it was just an impossible pipe dream or just not my gift, I am a complete beginner and you really really break these things down so well, a very gifted teacher. This is like a treasure trove of information. So so beyond grateful with these videos I don’t feel so alone, and like maybe it’s possible to learn and do something of value eventually. Thank you thank you thank you. ❤ and you make it organized for learning and easy to follow I don’t have to decide what I think I need to learn because you laid it all out. Thank you thank you thank you😊

    @ThePraisePrincess@ThePraisePrincess Жыл бұрын

    • never think its not for you. there are so many tools to pull out the ideas. cheers to you

      @lowlowseesee@lowlowseesee Жыл бұрын

    • I’m also starting with a Maschine Plus (I sold a lot of stuff to get here) little by little I believe

      @Irkennalpha@Irkennalpha Жыл бұрын

    • Daisy why don't you make him dinner? Like really really.... really like....(",)

      @citizenworld8094@citizenworld8094 Жыл бұрын

  • So, so good. There are lots of decent maschine tutorials, but nothing as clear and well paced as this.

    @dspmusik81@dspmusik81 Жыл бұрын

  • THIS OFFICIAL VIDEO IS DEFINITELY NEEDED FOR MK3 OWNERS LIKE ME.

    @damianrobertsdesigns@damianrobertsdesigns Жыл бұрын

    • Hey and definitely me too!!! Ha Ha!!!!

      @jetmerlin412-_2@jetmerlin412-_210 күн бұрын

  • This is much appreciated. Thank you.

    @brandonlesko3126@brandonlesko3126 Жыл бұрын

  • I needed this, thanks Native Instruments for the clear and concise tips. Love how the Maschine is still supported so well. Can't wait for the next videos :)

    @louismondaymusic3078@louismondaymusic3078 Жыл бұрын

    • Thank you Louis!

      @NativeInstruments@NativeInstruments Жыл бұрын

  • super useful video for me since i'm pretty new to Maschine! and love that Jef Gibbons got a shout out!!! his videos are always very informative and he has a great teaching style.

    @namagenshu@namagenshu Жыл бұрын

  • Seriously useful video for anyone with Maschine, this has sped up my work flow 10 times over and should help you out too. Thank you Boris and great video!!!!

    @Frank.77@Frank.77 Жыл бұрын

  • Everyday I learn a new thing about this beast, Thanks for all

    @arthurmachadomuniz1227@arthurmachadomuniz1227 Жыл бұрын

    • Everyday is a good day with Maschine 🧘

      @NativeInstruments@NativeInstruments Жыл бұрын

  • Holy crap I am so glad to find this on the official channel. Great stuff! I've been enjoying using my Maschine since I got it earlier this year, but was struggling to find a series of videos like this one that really breaks down the device and the hardware clearly. The manual is really great and I've generally been able to either find an answer to my questions in it or puzzle things out for myself, but video tutorials are a great way to learn. I even went as far as purchasing a third-party video course and found the instruction to be very difficult to follow even as someone who had been using the device for months already. Boris is such a great teacher. His instruction is super easy to follow. I'm only about ten minutes and I've already learned several new things.

    @thehomienicked8208@thehomienicked8208 Жыл бұрын

  • This is the video I wanted ever since I unboxed my Maschine. Thank you for your efforts Boris, great work!

    @Cadmeus@Cadmeus Жыл бұрын

  • finally... this has been much needed for years.

    @stefan_markovic_@stefan_markovic_ Жыл бұрын

  • This was fantastic. GEMS!

    @dopesnare@dopesnare Жыл бұрын

  • I actually thank you for this video. I have no idea why I am just now finding it when I should have found it years ago. It helps with the frustrating process of music creation on a new piece of gear.

    @toddmaek5436@toddmaek54362 ай бұрын

  • Great tutorial i've been procrastinating using my Maschine but this tutorial came in at a great time. Ready to go deeper and learn this awesome hardware! Stay inspired and motivated everyone!

    @DJNamtab@DJNamtab8 ай бұрын

  • i wish this tutorial was here when i started out. would save me watching hundreds of yt videos that mostly talking about the same thing and often confuse the heck out of you

    @shearcreatif@shearcreatif Жыл бұрын

  • Awesome video, clear, concise, right to the point. THANKS!!!

    @JoseVGavila@JoseVGavila2 ай бұрын

  • I am about 6 months into using Machine . I love how easy it is to get started , but soo much to learn. If you guys read these messages , thanks for taking the time to make this Tutorial . I have watched all the other official videos and I am really happy to see more in depth teaching . -cheers

    @Nethanieal@Nethanieal Жыл бұрын

  • WOW, these videos were LONG overdue! But thanks so much!! they are amazing. I am falling in love again with my M+. You are a great instructor.

    @falazarte@falazarte Жыл бұрын

  • This has opened my eyes to many different things, I have had my Mk3 about 2 years, and while I can use it pretty good, there's still much to learn and tricks to use! Another good way to learn how versatile and powerful this Maschine is, go watch all the KZhead and other videos of people doin jams / performances with their Maschines .. it's amazing, I've seen them used with and as everything and every genre of music you can imagine !! Thank you Boris and Native Instruments

    @klaytonvonkluge4905@klaytonvonkluge4905 Жыл бұрын

  • I've had Maschine Mk.2 for YEARS! and never really controlled the software from the hardware because I never took the time to figure it out. Just recently got the Mk.3 and this tutorial is insanely helpful!!!! Learning so much already!!!

    @lucid484@lucid484 Жыл бұрын

  • Very good tutorial. Easy to understand, and very helpful information that i have not seen in other tutorials.

    @EspenFrafalne@EspenFrafalne Жыл бұрын

  • How I learned to love the Maschine. This video.

    @marcusfreeweb@marcusfreeweb Жыл бұрын

    • We're honored 💛 Thank you so much for the kind words!

      @NativeInstruments@NativeInstruments Жыл бұрын

  • I had the first MASCHINE and I loved it! I definitely want to get this one! 👍🏾

    @OgDj2024@OgDj2024 Жыл бұрын

  • This is gold!! Thank you! ✌🏻

    @gtamediaproductions1@gtamediaproductions1 Жыл бұрын

  • Just got mine yesterday! What a fantastic device and great tutorial..

    @jijobabyjose8261@jijobabyjose82614 ай бұрын

  • Fantastic Tutorial thanks for sharing !!!

    @pjursa4113@pjursa41132 ай бұрын

  • Great video, I took note of many tips throughout the video!

    @philipgomees@philipgomees2 ай бұрын

  • Fantastic!! This is just what I need!! More please!!

    @paulgrooveside2803@paulgrooveside2803 Жыл бұрын

    • Part 2 coming soon!

      @NativeInstruments@NativeInstruments Жыл бұрын

  • Holy shit, 1 hour video and it's part 1?! Awesome job, thank you

    @nevertellmethaoddz8581@nevertellmethaoddz8581 Жыл бұрын

    • And the good news is... More is in the making! 🥁

      @NativeInstruments@NativeInstruments Жыл бұрын

  • This has to be the best tutorial that I have ever seen on youtube. Thanks so much for this.

    @NoiseFr3ak@NoiseFr3ak3 ай бұрын

  • thank you so much

    @cubasemixing@cubasemixing Жыл бұрын

  • Doing maschine+ good to know all this translates well. Great presentation.. when the presenter taps in those high hats with the note repeat, I was hella vibing. 😌🙌

    @seanocean@seanocean Жыл бұрын

  • Professor Mezga: After previewing over 1000 KZhead videos that involve teaching MASCHINE - as far as I am concerned you are the top and very best teacher of them all. Some I really like because of their fantastic charisma - sense of humor - very well editited visuals that correspond to what they are teaching - but what you do makes me feel like I am wasting my time when I watch anyone else. Why? Your pace is neither slow or rushed. You do not get lost in exposition of any detail - ever. Your use of words, structure of ideas, and truthful, sincere, and incredibly unbiased presentation - makes others seem like they need psychotherapy. Your teaching gift is absolute sanity and rational clarity. Instead of me having to sift through or tolerate some biased charisma: "Hey man - like this the MISTER-KOOL-BOSSMAN telling you the dope man on the BLAH BLAH BLAH" or "Gods of metal here - and for you metal mortals - I will show you the ultimate secrets of the metal apocalyse - so if you don't use Maschine - I am going to straigten you out BLAH BLAH BLAH" - and understand some of this culturally biased characters are brilliant and talented - but they have such a narrow view - I get annoyed with them - even though I still appreciate them. You are the only one out of the entire crowd that seems to be dead center when it comes to knowledge and wisdom first and personal preference bias - last. Most of the top professor chairs at the greatest educational institutions on this planet could not frame ideas - (no matter how smart and educated they are) with the CLARITY and CONTINUITY OF PURPOSE as the great "Professor Boris Mezaga". So here is my slogan for you: "When I present teaching about any subject commonly understood - I am successful because of the general experience of my audience - but when I teach anything that is complex and beyond the reach of the average student I am successful because I am "Boris Mezga!" Well done! You are my favorite example of a great teacher.

    @kenleymorrison759@kenleymorrison759 Жыл бұрын

    • Very well....NO....that was excellence within a well said and Completely True comment of the this well needed praise or "Professor Boris Mezaga"

      @jamilrayburn83@jamilrayburn83 Жыл бұрын

  • Great tutorial(s) by Boris / NI - really helpful and needed!

    @wolfganglahmann1933@wolfganglahmann1933 Жыл бұрын

  • THANK YOU, Mr. Boris !!! And Native Instruments!!

    @case_ku@case_ku7 ай бұрын

  • This is dope, great work Native Instruments

    @shriveonthetrack@shriveonthetrack Жыл бұрын

  • I’ve had this mas home for years and have been looking for in depth tutorials on how to use it ever since. Couldn’t find anything credible and it was very disappointing. Thank you for this video. This is exactly what I’ve been looking for!

    @williamparker6772@williamparker6772 Жыл бұрын

  • Bro mad respect. Thanks for this masterclass! 🔥

    @nightking1460@nightking14603 ай бұрын

  • Really great video, thanks! Off to check out the next one.

    @joxer96@joxer96 Жыл бұрын

  • Great video! Love this 🙌🏻

    @WaveBits@WaveBits Жыл бұрын

  • I just can't stop loving this thing! It's fantastic and Boris makes great instructional videos. Great work!! :)

    @eirikriiseandersen5588@eirikriiseandersen5588 Жыл бұрын

    • Thank you for the feedback Eirik!

      @NativeInstruments@NativeInstruments Жыл бұрын

  • Thank you, NI ! I am hoping upcoming parts of this series will cover using Maschine + / MK3 for live looping performance.

    @bdtiger91@bdtiger91 Жыл бұрын

  • Thank you! 🙏🏾This was really helpful

    @Imagineunicorns_zm@Imagineunicorns_zm Жыл бұрын

  • Thanks ..I really needed this training

    @sixxmill1465@sixxmill1465 Жыл бұрын

  • Better late than never!!!

    @maddmarkmusic@maddmarkmusic Жыл бұрын

  • This is just what needed! Thank you for this!

    @Jonotheproducer@Jonotheproducer Жыл бұрын

  • Keep bringing the MK3 love, NI. I'm late to the Mk3 party! 🥳 TY, this going to be SO helpful!

    @morgan8937@morgan8937 Жыл бұрын

  • Finally some proper tutorial. Thanks NI and especially Boris 🖤

    @petrknedlik@petrknedlik8 ай бұрын

  • I’ve had the MK3 for 4 years and have struggled because I didn’t know some of the hidden detailed features until this tutorial. I’m glad the official company NI made this tutorial. Keep it up! Thanks again!

    @alexanderbelice231@alexanderbelice231 Жыл бұрын

  • Thank you NI and Boris. Great video.

    @StephanieSante@StephanieSante6 ай бұрын

  • Super pédagogique. Learning a lot. Thanks

    @victordelemos1513@victordelemos15136 ай бұрын

  • The best and the most educational tutorial on the internet. Loved! I own maschine mk3 for 4 years and im still learning. Ps;: I WANT THAT FLAME MASCHINE WALLPAPER. 😭 * Im glad that no one wanted buying my my maschine, otherwise I would be regretting now.

    @barbosa8498@barbosa8498 Жыл бұрын

  • Thank you for this!

    @greenbmusic@greenbmusic Жыл бұрын

  • Now I am willing to spend more money on NI. I purchased Maschine last year but didn't really use it properly but now I finally learn what could I do with it.

    @user-oi1go4uo9n@user-oi1go4uo9n Жыл бұрын

    • Great to hear you look forward using Maschine at its fullest 🔥

      @NativeInstruments@NativeInstruments Жыл бұрын

  • Fantastic!! This was long due! Thanks so much…

    @basakarunava@basakarunava Жыл бұрын

  • THANK YOU!! KEEP PUSHING THE BAR

    @mr_bailey7834@mr_bailey7834 Жыл бұрын

  • This man right here! Thank you so much!!!

    @AKGDirector@AKGDirector Жыл бұрын

  • I have never seen a full tutorial on how to work with vocals. Please add full session on that ☀️😃🎶✨

    @magnuseriksson8081@magnuseriksson8081 Жыл бұрын

    • Thanks for the feedback 😃🎶

      @NativeInstruments@NativeInstruments Жыл бұрын

    • @@NativeInstruments No worries, love the tutorials you have done, it makes me really see the value of my M Plus. I do not have a good workflow for my vocals in the M plus yet.

      @magnuseriksson8081@magnuseriksson8081 Жыл бұрын

  • Danke Boris! Mega Video!

    @EurocorpFx@EurocorpFx Жыл бұрын

  • thanks Boris . . . from ur guidance, pulled the trigger and got my M+ and happy

    @lukemakayabu4369@lukemakayabu436911 ай бұрын

  • Благодарю за подробное и понятное обьяснение для начинающих! Хорошая работа! Все понятно ..все по делу! Теперь точно попрет музон!!!!!!!!!🤘

    @user-xr9zx4cp7w@user-xr9zx4cp7w Жыл бұрын

  • I've used Maschine since version 1 and I even learnt a couple of things. Nicely done! Please make an internal plugin like utility in Ableton, it's been overlooked for years and now we have a standalone version it's essential for Stereo/Mono Right/left use. Pretty please N.I!

    @JC-pu3vl@JC-pu3vl Жыл бұрын

    • +100 Seriously, NI! This is a HUGE killer for people sampling audio and want to only have one side to work with, for example.

      @nic3939@nic3939 Жыл бұрын

  • Ура! Видео которого я ждал многие годы!) Thank's NI!

    @MrSetigod@MrSetigod Жыл бұрын

  • blew my mind thanks so much

    @lt-pn1wh@lt-pn1wh11 ай бұрын
KZhead