Repair of the broken outer door handle VAZ-2109 (2108-21099), replacement of the key

The key (the trigger) was broken in the outer handle of the VAZ-2109 door and I decided to make it repair - to replace the trigger in the handle, so as not to buy the entire handle assembly, because it's expensive. The key itself, it's a trigger, cost me 10 hryvnia on one of the car markets. The key was universal, that is, right / left, but it turned out that it had to be adjusted in place to the handle itself, because it was not very high quality. It is necessary to cut one of the bosses and adjust the hole for the axis, since they did not coincide with me. To do this, you needed a file, a round file, pliers, pliers, some locksmith skills, a desire and some free time. Although, if the key itself is of good quality, then customize it, it may not be necessary.
Yes, I forgot to mention in the video that after changing the key, it may be necessary to adjust the length of the pull from the handle to the lock itself - unscrew / screw the plastic tip that is fitting onto the ball point of the lock.
Full video about removing / installing the door map (hatch): • Как снять/поставить об...
Past video on the replacement of the power window handle: • Замена ручки стеклопод...
The following video is how to remove the instrument panel on the ninth: • Как снять-поставить щи...
Put on 👍, share this video with friends, 🎃
Add to favorites ❤ if you liked the video! 👏
Write your thoughts about the video in the comments! 👌
Subscribe to the channel! ✔ Will continue!ッ
/ @aleksey_goncharov_liv...
Channel: / @aleksey_goncharov_liv...
My first channel is: / alexglechik
Videos: • Ремонт наружной ручки ...