This video shows the manufacturing process of a very simple pulse soldering iron. More precisely, the soldering iron is pulsed only in terms of rapid heating. At this soldering iron, the tip itself is the heating element. After the soldering iron is heated it can be used like any other soldering iron, designed for long-term operation.
In this soldering iron, it is very easy to change the tip, and it does not require a separate ground wire, since the soldering iron power circuit is connected to the tip. That is, you can ground any of the power wires. In all my homemade soldering irons, I minimized the distance from the grip to the end of the tip.
To build a soldering iron does not require micanite or mica, which greatly simplifies the search for materials.
I welded copper lugs to a nichrome wire using a makeshift gas burner: • Миниатюрная газовая го...
Any adjustable power supply with an output current of 10 Amps is suitable for powering the soldering iron. Amateur enthusiasts usually have such a block. But if there is no such power supply, then it is easy to make it yourself from the power supply from a compact fluorescent lamp and a DC-DC regulator: oldoctober.com/ru/smps/
Самый главный нюанс паяльников это умение держать на кончике паяльника заданную температуру даже при расплавлении и пайке припоем. А для этого в жале паяльника должен быть термодатчик с обратной связью. В этом паяльнике нет такого устройства и видно на видео что при плавлении припоя сразу же появляется эффект "замерзания". Паяльние станции рулят. Кто раз попробует- обратно к паяльникам-самоделкам уже не вернётся.
Тот кто умеет паять, сможет паять чем угодно, а тому кто не умеет, никакая станция не поможет. И так в любой профессии, начиная от хирурга и кончая видеоблогером. Да вы и сами наверняка видели, как мастера на KZhead учат спаивать два провода жалом конической формы. Но зато у них есть паяльная станция с циферками и прочими фенечками. Ну а мне эти, с позволения сказать, понты ни к чему.
amazing
Nice video
Super sir.
Ja that propane burner or acetylene one?
This is a DIY butane gas burner: kzhead.info/sun/mNaQfpicg2uceYE/bejne.html
Юрий, повышай кликабельность: incredible, great, available, unusual!
Спасибо! Добавил.
@@IurisWorkshop ،،،،،،،،،،،
Какие параметры БП?
Тоже интересно
На нём написано: 5 Вольт, 100 Ватт.
Where i buy this power suply
Pls link
@@rapfame_club I make my own power supplies.
:(
But you could create a page where you will sell those resources, I think you would earn enough
@@rapfame_club Thank you for your interest in my work! Something about homemade switching power supplies can be found in my blog, in which I previously wrote: oldoctober.com/ru/smps/ oldoctober.com/ru/pulse_transformer/ (There is a translation button in the upper left corner.) The cost price of a device manufactured in a single copy is an order of magnitude higher than a device produced in series. That is why every tenth message offers to buy a device on Aliexpress. I make money not from making devices, but from videos.
Sorry but that is not a soldering Iron
We're also curious to know what it is.
@@IurisWorkshop you make just a part of it (the copper wire in the end) not the whole one. You need a kind of a transformer if you want an instant heat or also with a pulse I made one with a transformer myself and I'm looking for the pulse one thank you
Thank you for your comment! It is very useful for us!