just a simple explanation of the 3 main trigger designs I use.
Пікірлер
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. kzhead.infoUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
@hoangvienvan36898 ай бұрын
best trigger video with all schemes together in one place. Thanks. Congratulations.
@emilkermendy45952 жыл бұрын
I am surprised on how well one piece trigger is. It is a lot lighter to pull than convensional pistol crossbow trigger.
@ulungprabowo Жыл бұрын
Yes it works great. Crossbow triggers are all about leverage ratios you can have a 1lb pull on a 200lb Crossbow.
@archery.customs Жыл бұрын
I'm lucky to have found this channel. I will be your follower, greetings from Indonesia🙏🙏🇮🇩🇮🇩
@DewaSenapanIndonesia Жыл бұрын
I like the second one.👍
@godzillafanrpg Жыл бұрын
cool u can make a bullpup with the 3 piece , my crossbow comes from the factory with a 3 piece makes the lenght 6 inches shorter
@gustavcrossbow28052 жыл бұрын
on the second trigger, would a longer downward piece on the string release make it possible to catch on the trigger to stop it at the right position to recock?
@jayjoe33 Жыл бұрын
Awesome thanks 😊
@smokster06042 жыл бұрын
Very,very good idea..👍👍👍
@simon516992 жыл бұрын
Hey thanks! Can you add templates?
@timinamen1217 Жыл бұрын
the right single can take heavy draw ?? thks
@cheachyang35022 жыл бұрын
thanks bro you give me the missing part
@royalkeralabgmi7379 Жыл бұрын
สุดยอดมากครับ
@kwanchaidiy8 ай бұрын
Top
@romilsonsoares1199 Жыл бұрын
Which one is softest? I find middle one heavy to pull with stronger bows which throws accuracy.
@zumbazumba12 жыл бұрын
The left one is and you can change your pin placement to change the leverage to make it easier or harder to release.
@archery.customs2 жыл бұрын
@@archery.customs So rotating nut is fixed and i cant change that.So you mean the middle connecting bar pin? Or the pin on trigger itself? 0:07 If i move the pin on central connecting piece to right and increase trigger leaver it should give lighter pull right? Or is it opposite?
@zumbazumba12 жыл бұрын
@@zumbazumba1 so the rotating peace pin has to stay behind the string. But you can move the middle and the left peace's pins. Think of it like this as you move the pin it will change the distance the assembly has to travel to release so if you move the center pin further from the string it will be easier to pull but have to move a further distance to release.
@archery.customs2 жыл бұрын
@@archery.customs Thanks i understand now. By any chance you know a draw length of a typical cheap 80lbs pistol crossbow limb? I found cheap limb and i am trying to build repeating crossbow pistol but i cant find that information anywhere.
@zumbazumba12 жыл бұрын
👏👏👏👍👍
@paulotakahashi86069 ай бұрын
Sir,hope you can't teach how make the crossbow from start to finish..detail.. please ya..
@thuglifeeasternoz51352 жыл бұрын
Could I get a copy of the drawings of your triggers so I could try to make me one?
@russellverdin83392 жыл бұрын
Honestly I don't just have a drawing or template I sketched them freehand. Try this on your computer or phone, whatever you watch the video on, take a screen shot and zoom in and you can trace it. I just did it on my phone and it seems to work.
The crossbow went together quickly and the general fit and finish is a bit above what I expected for the price. kzhead.infoUgkx5B43Qabqt1HedUJyfEqxiwBCfaooIH52 The adjustable stock is a little loose. I had an issue when I tried to cock the bow for the first time with the safety on. The string set in the trap box, held just enough to build up enough tension to rip the string out of my hands when it let go. No significant damage was done, and once I got it sighted in, I wrecked a couple bolts by sending one straight down the shaft of the first. I'm holding ~2" groups at around 50 yards, and I'm not an expert by any means. Best part is that they supply all the replacements parts you may ever need
best trigger video with all schemes together in one place. Thanks. Congratulations.
I am surprised on how well one piece trigger is. It is a lot lighter to pull than convensional pistol crossbow trigger.
Yes it works great. Crossbow triggers are all about leverage ratios you can have a 1lb pull on a 200lb Crossbow.
I'm lucky to have found this channel. I will be your follower, greetings from Indonesia🙏🙏🇮🇩🇮🇩
I like the second one.👍
cool u can make a bullpup with the 3 piece , my crossbow comes from the factory with a 3 piece makes the lenght 6 inches shorter
on the second trigger, would a longer downward piece on the string release make it possible to catch on the trigger to stop it at the right position to recock?
Awesome thanks 😊
Very,very good idea..👍👍👍
Hey thanks! Can you add templates?
the right single can take heavy draw ?? thks
thanks bro you give me the missing part
สุดยอดมากครับ
Top
Which one is softest? I find middle one heavy to pull with stronger bows which throws accuracy.
The left one is and you can change your pin placement to change the leverage to make it easier or harder to release.
@@archery.customs So rotating nut is fixed and i cant change that.So you mean the middle connecting bar pin? Or the pin on trigger itself? 0:07 If i move the pin on central connecting piece to right and increase trigger leaver it should give lighter pull right? Or is it opposite?
@@zumbazumba1 so the rotating peace pin has to stay behind the string. But you can move the middle and the left peace's pins. Think of it like this as you move the pin it will change the distance the assembly has to travel to release so if you move the center pin further from the string it will be easier to pull but have to move a further distance to release.
@@archery.customs Thanks i understand now. By any chance you know a draw length of a typical cheap 80lbs pistol crossbow limb? I found cheap limb and i am trying to build repeating crossbow pistol but i cant find that information anywhere.
👏👏👏👍👍
Sir,hope you can't teach how make the crossbow from start to finish..detail.. please ya..
Could I get a copy of the drawings of your triggers so I could try to make me one?
Honestly I don't just have a drawing or template I sketched them freehand. Try this on your computer or phone, whatever you watch the video on, take a screen shot and zoom in and you can trace it. I just did it on my phone and it seems to work.