When should you fix one or replace one. Fixing frame rail on 2007 t600
Пікірлер
nice work. not a lot of people still doing this kind of work. new trucks are junk anyway always worth saving a older truck when possible imo.
@Ezrider359 Жыл бұрын
The irony being in 2007 this was a “piece of junk new truck” not like they used to make ‘em in the 80s!
@mobilegameclips56288 ай бұрын
You’re on your way to a million!
@rbc5878 Жыл бұрын
First of all, I am not a master of re-bending like you. But, I know this. Every time I watch one of your videos, I learn something else. Keep'em comin.
@domthomas1002 Жыл бұрын
Your personality and knowledge are unmatched. Keep up the good work and love the pointer.
@NickLandsberg780 Жыл бұрын
Hell yeah i can watch this all day. It’s like being at work but without broken things and customers calling every 15 minutes.
@raccoonjesus1305 Жыл бұрын
Yes worth it
@Charlie-op4vl3 ай бұрын
You are one of the rare channels, one of the rare ones who are sooo underrated, I genuinely expected to see 100-500K subs and saw 7K, I was surprised. Keep on goin’ and you’ll see the light of stardom.
@4886-Electrical-Lead Жыл бұрын
Came for the bendin, stayed for the Benden
@mattmurdock4336 Жыл бұрын
Great videos. You have the style to have a TV show. I know not a lot of people are interested in seeing how the real world works. I would enjoy being in your shop to watch you work but I know my many questions would hold up your work. My dad used to do this at home on a much smaller scale. Car wheels, bumpers, bicycle frames , bent hinges. I learned a lot from watching and apply it in my work at home. Thanks heaps. Greetings from Melbourne Australia.
@romandybala Жыл бұрын
Like you said, there are standards and tolerances. As long as it's straight and not compromised, I'd run it. People are too quick to throw things away these days. When I'm done with something ib try to find someone who can use it instead of just chucking it in the bin
@adamlesandrini312 Жыл бұрын
Your explanation regarding relieving stress & fiber realignment was remarkably clear. Great, consise explanation of what you're doing when straightening frames.
@nerfmadeeasy3 ай бұрын
Subbed forever. This channel is gunna be great. Keep up the GREAT content ‼️
@isaiahkane9282 Жыл бұрын
Looks like you've done that a few times before.....lol. Nice work Sir!!
@richardmondor1360 Жыл бұрын
A few lol 😂
@bendinwithbendon Жыл бұрын
This dude about to blowup “We’re bending”
@ghostbuilder3187 Жыл бұрын
I think you did an absolutely fantastic job and I wouldn't throw it away
@MixedGoku Жыл бұрын
My old man would have loved this channel.
@beekeeper8474 Жыл бұрын
🤣man I love your red pointer
@David-yy7lb Жыл бұрын
Nice job straitening that. Glad you are on youtube I do not do tik tok sounds like it will explode my phone. Be safe Sir.
@badgerpa9 Жыл бұрын
Common guys subscribe, give the video a thumbs up and share it to fakebook or somewhere to help his channel.
@badgerpa9 Жыл бұрын
The big c clamp is a beast
@nou8257 Жыл бұрын
This guy is truly gifted and blessed with exceptional talent and skill.
@louissmith77173 ай бұрын
Sir William Bender, great clip😎😎😎😎😎💪💪💪💪💪
@joelbrown34794 ай бұрын
Love the job-specific tools, make what you need to get the job done... PRICELESS, Sir William Bendalot😎😎😎
@joelbrown34794 ай бұрын
This is like watching Leonardo DaVinci paint the Mona Lisa. Makes me wanna go bend something so he can fix it.
@bigbossimmotal3 ай бұрын
Just wanted to leave a comment to help your visibility. Very entertaining and I love your work. Hope you get paid well I'm sure learning all that didn't come easy, or quick.
@Airisweetheart Жыл бұрын
Hat's off to you, you are definitely a master of your craft,,,hardly anyone can even do this anymore
@donniebagwell95364 ай бұрын
I've had frame rails straightened before, only once did I feel that it wasn't going to be as strong as it originally was, so I just added a little bit of strengthening to it. Chasing I welded up some gusseting and it's an extra plate and well ended up better than it was before I bought it.
@tomdave427 сағат бұрын
Nice work. You’re doing a great job on the channel too! Keeping it clean so my son can watch with me!
@chrismatheson16582 ай бұрын
Please please tell me when a new customer comes in you walk around their rig with that pointer pointin shit out
@shaneatl Жыл бұрын
Love this guy, wish i could have the pleasure of working alongside someone like this man.
@lance_WatchThis14 ай бұрын
Hard work that very few do now a days, your work is very clean good job sir…
@UOIGET Жыл бұрын
Love to be fly on this guys wall. All the things you could learn. So cool.
@scottdrenske8309 ай бұрын
Better than any TV show!
@njseashorechas269811 ай бұрын
Just found this channel. Entertaining and informative. Keep it up
@imjamesiam Жыл бұрын
Thank you. Glad your here
@bendinwithbendon Жыл бұрын
You are a hell of a character man. Really enjoy the videos
@nalgas5569 Жыл бұрын
Great job Boss! Worth the fix!
@rowdyropp7464 Жыл бұрын
I came to the channel because of the shorts. And I'm glad to see you do longer video's as well. Subscribed ! Entertaining, and very informative. You sir, are a master of your trade.
@petemclean13528 ай бұрын
Talented man and can make you laugh. Hollywood is way overpriced.
@riverflyswatter4 ай бұрын
Genuine skill and knowledge of materials amazing work
@stevet8055 Жыл бұрын
I could've used you as a teacher when I went to school for Diesel Mechanics
@user-zn8rj3mo6z Жыл бұрын
You have all sorts of cool bending tools !
@jakestabile7027 Жыл бұрын
Hey just found your Channel . Keep up the good work the explaining on the frame stuff is great . Cheers you got a fan here
@TheFrancogt1 Жыл бұрын
Best channel on you tube , keep the great content coming:)
@jeramiemacelheron2335 Жыл бұрын
Another good one man! Awesome to see
@metaspencer Жыл бұрын
Awesome content bro! Really enjoy the show.
@mikemurray7572 Жыл бұрын
Wish i had this much talent. Save save save
@jerrybouchard50373 ай бұрын
Thanks for letting folks know. Majority of bent frames are fixable.
@eVamlite Жыл бұрын
That's a mighty fine sound track.
@johnwheeler7805 Жыл бұрын
Hydraulic rams make things look so easy
@deant876 Жыл бұрын
They do
@bendinwithbendon Жыл бұрын
A master showing his skills
@paulcoulter7181 Жыл бұрын
Keep it up man!! Good stuff here
@joelgardner9840 Жыл бұрын
Love it love it love it!!!! Keep the vids coming man, even longer vids would be great. Love from Oz 👍
@dusanzukic5062 Жыл бұрын
easy fix , Great work man , Rob NSW Australia
@13yearsaprepperr.jtilbury.51 Жыл бұрын
Hilarious, entertaining and informative dude working hard. Love this channel
@O0Neutral0O Жыл бұрын
Nice job. Keep up the great work.
@ericwaterbury25453 ай бұрын
Great work , thanks for posting
@grumpy1311 Жыл бұрын
When I watch these videos I feel safe.
@jackknife3603Ай бұрын
Definitely worth the fix
@dustincollins4547 Жыл бұрын
Very Educational awesome job
@jasonallen930911 ай бұрын
Worth the fix for sure.
@JoeBananas77 Жыл бұрын
Well worth the work in my opinion. 👍👍
@paultro84579 ай бұрын
Awesome work👍
@fredstroh43082 ай бұрын
Looks better than alot I've seen
@bigred1247 Жыл бұрын
loving the videos. I just started driving larger trucks, im a fan of fixing it if its worth it. Good job sir keep doing what you do maybe my generation can learn something from you and realize things can be fixed instead of being thrown away. I see twisted trucks come thru work all the time, its quite funny what people will run with it being twisted to you know what. cheers Bendon keep bendin
@gertsky Жыл бұрын
You're pretty good at bendin' stuff.
@TokenTombstone Жыл бұрын
Looks like a very easy fix for you 👍👍🇦🇺
@davidbarnsley84864 ай бұрын
Worth it. 100%
@ReapThySorrow Жыл бұрын
Use to own a big Chief frame machine back in the 80s. Only worked on cars and pickups but stills lots of Bull work
@robbobcat7286 Жыл бұрын
Worth the work
@Charles-mn3hj4 ай бұрын
Hello i have just subscribed to your channel found you on a short i do similar job to you and you can never stop learning love the show you have got to England good luck to 100000
@josephdunham9067 Жыл бұрын
Damm that’s sick. I done 100+ air springs with bent ass angles keep it up fix them all
@MsCatcatcat Жыл бұрын
Worth the fix, when tractors today are almost as much as a home.
@billyost1479 Жыл бұрын
Enjoyed the Video.
@jamesbrewer-lk8te3 ай бұрын
You the man
@johncatalioto6423Ай бұрын
it’s worth the fix!
@lepowell9095 Жыл бұрын
Not usually interested in irrelevant to me mechanic vids but enjoy yours
@billfromnxtdoor5575 Жыл бұрын
I consider this man, the worlds greatest recycler. And YES, he does make a PROFIT for his boss.😢😢😢😢
@alanmustard73644 ай бұрын
With this videos people. Appreciate more our work. Cause there is no instructions or guides of how to. Actually we use our brains to know where and how either pull or push. Point down or up. And yes we do design our own hooks for special purposes
@josebecerra1681 Жыл бұрын
Absolute wizardry!
@Slypppry77 Жыл бұрын
Any Pre Emission truck deserves a 2nd chance at service life IMO.
@flyrock45 Жыл бұрын
That stuff is becoming gold now
@junicohen7918 Жыл бұрын
Your the KING. A+++ A1
@YardpigTSI4 ай бұрын
Straighten and roll with it, especially a KW-T600
@GKRTANKLINESLLC. Жыл бұрын
Down to earth, real being real
@sumtingwong5942 Жыл бұрын
Dieing art.. great work man..
@fukit8374 Жыл бұрын
Awesome video can you do one on plating a frame
@adamboychuk8221 Жыл бұрын
A 2022 Kenworth W990 dump truck with the small engine and a drop axle is 272k rn for commenters reference just brought one back from Baltimore. (Half the coal trucks we have have had their frames straightened once or twice, they fall over alot 😂)
@ebolawarrior451 Жыл бұрын
It’s worth the fix
@regsmith76044 ай бұрын
2 years ago I broke the frame on one of my trucks, nothing bent just stress cracks (its a self loader so lots of focused stress on one area) anyway after a bit of panicking, talked to a buddy, turns out every one of his trucks has been shortened or extended in one way or another, finding a truck on the used market that hasn't had some form of serious frame repair is near impossible... anyhow bout 60 hours of labor later, frame sectioned, welded and sleaved, with a lot better cross members and bolt pattern then previously... better then ever.
@northmanlogging2769 Жыл бұрын
I can imagine that there are some people that say they can straighten frames and I imagine there's people that have drove those trucks that supposedly the frames have been straightened out so they've had ridiculous experiences but I'll tell you if this guy straightens a frame right here you can guarantee that it's straight and if they really know what they're doing like he does it's going to be just as good if not better than what it was before the there's a difference between somebody that says they're a frame straightener and somebody that can actually do the job the right way and put it back exactly how it's supposed to
@123456789898144 ай бұрын
I hope you have an apprentice or two, nothing grinds my gears more than seeing minor damaged cars, trucks, etc ground into scrap instead of being repaired.
@franksprecisionguesswork5016 күн бұрын
If the truck is still serviceable, then why on earth would someone discard it over what, in the big picture, was a relatively minor repair. Keep those older rigs doin' what they do best. Oh yeah, hi from Oz.
@christopherdaly9718 Жыл бұрын
Good work. Would it help if you welded a solid brace to the inner side of where the bend was? Not sure if it's necessary but if that point where it bent is weaker now, a brace might help. Assuming, of course, it doesn't interfere with operation.
@JRo250 Жыл бұрын
By welding something on a thick metal frame, you weaken the metal and also it will bend due to the heat of the welding. That's why they use screws.
@janb.2025 Жыл бұрын
The frame is no weaker than when it was made. Consider this the frame started out as a flat piece of steel. Then the company that made the frame bent that steel into the c channel shape of the frame. Did that weaken it. No it did not
@holmes1956O Жыл бұрын
More old English , that was great
@0dbm8 ай бұрын
Where is this shop? My 06 c5500 uhaul has new tire wheel up front, shakes like hell going down the road. Probably took a good hit
@thomashilaire737 Жыл бұрын
Pointy finger makes the video 👌
@HJZ75driver Жыл бұрын
the music! yes! lol
@sirmcardelsir8468 Жыл бұрын
panel beating with REALLY big hammers!
@Disinterested1 Жыл бұрын
You do amazing work.. where are you located because I have a w9 I would just like to bring for a alignment
@alenribic3932 Жыл бұрын
Do you use a type of level or anythinf to see if you strait
@kingsam178 Жыл бұрын
Why would you have to heat up that back frame rail to bend it down?
@MoralConflict8 ай бұрын
I think you should pick one or two great songs to use on every time-lapse.
@michalhowling3702 Жыл бұрын
Where is your shop located at? I need my truck looked at still wearing tires after 4 3 wheel alignments
nice work. not a lot of people still doing this kind of work. new trucks are junk anyway always worth saving a older truck when possible imo.
The irony being in 2007 this was a “piece of junk new truck” not like they used to make ‘em in the 80s!
You’re on your way to a million!
First of all, I am not a master of re-bending like you. But, I know this. Every time I watch one of your videos, I learn something else. Keep'em comin.
Your personality and knowledge are unmatched. Keep up the good work and love the pointer.
Hell yeah i can watch this all day. It’s like being at work but without broken things and customers calling every 15 minutes.
Yes worth it
You are one of the rare channels, one of the rare ones who are sooo underrated, I genuinely expected to see 100-500K subs and saw 7K, I was surprised. Keep on goin’ and you’ll see the light of stardom.
Came for the bendin, stayed for the Benden
Great videos. You have the style to have a TV show. I know not a lot of people are interested in seeing how the real world works. I would enjoy being in your shop to watch you work but I know my many questions would hold up your work. My dad used to do this at home on a much smaller scale. Car wheels, bumpers, bicycle frames , bent hinges. I learned a lot from watching and apply it in my work at home. Thanks heaps. Greetings from Melbourne Australia.
Like you said, there are standards and tolerances. As long as it's straight and not compromised, I'd run it. People are too quick to throw things away these days. When I'm done with something ib try to find someone who can use it instead of just chucking it in the bin
Your explanation regarding relieving stress & fiber realignment was remarkably clear. Great, consise explanation of what you're doing when straightening frames.
Subbed forever. This channel is gunna be great. Keep up the GREAT content ‼️
Looks like you've done that a few times before.....lol. Nice work Sir!!
A few lol 😂
This dude about to blowup “We’re bending”
I think you did an absolutely fantastic job and I wouldn't throw it away
My old man would have loved this channel.
🤣man I love your red pointer
Nice job straitening that. Glad you are on youtube I do not do tik tok sounds like it will explode my phone. Be safe Sir.
Common guys subscribe, give the video a thumbs up and share it to fakebook or somewhere to help his channel.
The big c clamp is a beast
This guy is truly gifted and blessed with exceptional talent and skill.
Sir William Bender, great clip😎😎😎😎😎💪💪💪💪💪
Love the job-specific tools, make what you need to get the job done... PRICELESS, Sir William Bendalot😎😎😎
This is like watching Leonardo DaVinci paint the Mona Lisa. Makes me wanna go bend something so he can fix it.
Just wanted to leave a comment to help your visibility. Very entertaining and I love your work. Hope you get paid well I'm sure learning all that didn't come easy, or quick.
Hat's off to you, you are definitely a master of your craft,,,hardly anyone can even do this anymore
I've had frame rails straightened before, only once did I feel that it wasn't going to be as strong as it originally was, so I just added a little bit of strengthening to it. Chasing I welded up some gusseting and it's an extra plate and well ended up better than it was before I bought it.
Nice work. You’re doing a great job on the channel too! Keeping it clean so my son can watch with me!
Please please tell me when a new customer comes in you walk around their rig with that pointer pointin shit out
Love this guy, wish i could have the pleasure of working alongside someone like this man.
Hard work that very few do now a days, your work is very clean good job sir…
Love to be fly on this guys wall. All the things you could learn. So cool.
Better than any TV show!
Just found this channel. Entertaining and informative. Keep it up
Thank you. Glad your here
You are a hell of a character man. Really enjoy the videos
Great job Boss! Worth the fix!
I came to the channel because of the shorts. And I'm glad to see you do longer video's as well. Subscribed ! Entertaining, and very informative. You sir, are a master of your trade.
Talented man and can make you laugh. Hollywood is way overpriced.
Genuine skill and knowledge of materials amazing work
I could've used you as a teacher when I went to school for Diesel Mechanics
You have all sorts of cool bending tools !
Hey just found your Channel . Keep up the good work the explaining on the frame stuff is great . Cheers you got a fan here
Best channel on you tube , keep the great content coming:)
Another good one man! Awesome to see
Awesome content bro! Really enjoy the show.
Wish i had this much talent. Save save save
Thanks for letting folks know. Majority of bent frames are fixable.
That's a mighty fine sound track.
Hydraulic rams make things look so easy
They do
A master showing his skills
Keep it up man!! Good stuff here
Love it love it love it!!!! Keep the vids coming man, even longer vids would be great. Love from Oz 👍
easy fix , Great work man , Rob NSW Australia
Hilarious, entertaining and informative dude working hard. Love this channel
Nice job. Keep up the great work.
Great work , thanks for posting
When I watch these videos I feel safe.
Definitely worth the fix
Very Educational awesome job
Worth the fix for sure.
Well worth the work in my opinion. 👍👍
Awesome work👍
Looks better than alot I've seen
loving the videos. I just started driving larger trucks, im a fan of fixing it if its worth it. Good job sir keep doing what you do maybe my generation can learn something from you and realize things can be fixed instead of being thrown away. I see twisted trucks come thru work all the time, its quite funny what people will run with it being twisted to you know what. cheers Bendon keep bendin
You're pretty good at bendin' stuff.
Looks like a very easy fix for you 👍👍🇦🇺
Worth it. 100%
Use to own a big Chief frame machine back in the 80s. Only worked on cars and pickups but stills lots of Bull work
Worth the work
Hello i have just subscribed to your channel found you on a short i do similar job to you and you can never stop learning love the show you have got to England good luck to 100000
Damm that’s sick. I done 100+ air springs with bent ass angles keep it up fix them all
Worth the fix, when tractors today are almost as much as a home.
Enjoyed the Video.
You the man
it’s worth the fix!
Not usually interested in irrelevant to me mechanic vids but enjoy yours
I consider this man, the worlds greatest recycler. And YES, he does make a PROFIT for his boss.😢😢😢😢
With this videos people. Appreciate more our work. Cause there is no instructions or guides of how to. Actually we use our brains to know where and how either pull or push. Point down or up. And yes we do design our own hooks for special purposes
Absolute wizardry!
Any Pre Emission truck deserves a 2nd chance at service life IMO.
That stuff is becoming gold now
Your the KING. A+++ A1
Straighten and roll with it, especially a KW-T600
Down to earth, real being real
Dieing art.. great work man..
Awesome video can you do one on plating a frame
A 2022 Kenworth W990 dump truck with the small engine and a drop axle is 272k rn for commenters reference just brought one back from Baltimore. (Half the coal trucks we have have had their frames straightened once or twice, they fall over alot 😂)
It’s worth the fix
2 years ago I broke the frame on one of my trucks, nothing bent just stress cracks (its a self loader so lots of focused stress on one area) anyway after a bit of panicking, talked to a buddy, turns out every one of his trucks has been shortened or extended in one way or another, finding a truck on the used market that hasn't had some form of serious frame repair is near impossible... anyhow bout 60 hours of labor later, frame sectioned, welded and sleaved, with a lot better cross members and bolt pattern then previously... better then ever.
I can imagine that there are some people that say they can straighten frames and I imagine there's people that have drove those trucks that supposedly the frames have been straightened out so they've had ridiculous experiences but I'll tell you if this guy straightens a frame right here you can guarantee that it's straight and if they really know what they're doing like he does it's going to be just as good if not better than what it was before the there's a difference between somebody that says they're a frame straightener and somebody that can actually do the job the right way and put it back exactly how it's supposed to
I hope you have an apprentice or two, nothing grinds my gears more than seeing minor damaged cars, trucks, etc ground into scrap instead of being repaired.
If the truck is still serviceable, then why on earth would someone discard it over what, in the big picture, was a relatively minor repair. Keep those older rigs doin' what they do best. Oh yeah, hi from Oz.
Good work. Would it help if you welded a solid brace to the inner side of where the bend was? Not sure if it's necessary but if that point where it bent is weaker now, a brace might help. Assuming, of course, it doesn't interfere with operation.
By welding something on a thick metal frame, you weaken the metal and also it will bend due to the heat of the welding. That's why they use screws.
The frame is no weaker than when it was made. Consider this the frame started out as a flat piece of steel. Then the company that made the frame bent that steel into the c channel shape of the frame. Did that weaken it. No it did not
More old English , that was great
Where is this shop? My 06 c5500 uhaul has new tire wheel up front, shakes like hell going down the road. Probably took a good hit
Pointy finger makes the video 👌
the music! yes! lol
panel beating with REALLY big hammers!
You do amazing work.. where are you located because I have a w9 I would just like to bring for a alignment
Do you use a type of level or anythinf to see if you strait
Why would you have to heat up that back frame rail to bend it down?
I think you should pick one or two great songs to use on every time-lapse.
Where is your shop located at? I need my truck looked at still wearing tires after 4 3 wheel alignments