Installing CHEAP Headers On The LEGENDARY M156 In My E63 AMG! SOUNDS INSANE!!
2023 ж. 3 Қаң.
188 162 Рет қаралды
Finally doing some mods to my E63 AMG! I've had these headers and OE Tuning tunes since I bought the car and just now got around to installing them. Not without some struggle of course! Enjoy the 6.2L of German v8 bliss!
Instagram: chris_sullyvan
Love how he delivers every major mod in one solid video and doesn’t chop it into a series for views
You mean legit street cars fuck that guy
Bought a 2009 CL63 AMG a couple of months ago and saw that it had a carbon fiber airbox by Rentech under the hood. So I called Rentech in Florida with my VIN # and they told me back in 2013 they installed airbox, throttle body, headers and ECU tune for the original owner. Now puts out 577Hp and 533ft/lbs of torque. $20k worth of work on top of the $155k original sticker. Car is mint with 60k on the odometer, black on black. Only paid $30k for it at a Buick dealer, don't think they realized what they had.
They get over on the customer all the time. I love it when people get over on them 👍
instagram? or anything
That’s the best part about these cars. People don’t know what they are and it leaves great opportunities for the ones who do
2009 E63 I paid $10k from a private seller with very low mileage are these vrp products and where are you located ??
so so so nice! The way you can take an exhaust system that is clearly not made for your car and then put it all together with fab work that turns out AMAZING. Man, such great content!! The car sounds just PERFECT as well.
Such quality content. It’s always a pleasure watching.
The sounds incredible 🎶🎶🎶 As car guys we feel all your frustration and joy. The end result is a bad ass sounding Amg !! Great video!!!
Man, what a beautiful job! You're awesome and I really like how you work your way out of any issue so professionally!
Love cars and really love your channel! On your way to 50k! Thanks for sharing your awesome skills and content!
Love to see on your face when you have that smile of accomplishment after all the hours of busting knuckles, frustration , cursing up a storm because of it and all the need to just get away just to inhale to inhale a lung full of air lol, and the added extra work that you had to accomplish, Job well done again! Your KZhead Vlogs are "Thee Absolute Best" always. When you picked up the ZO6 with the blown engine, I had to rewind it when you arrived at the co-op complex because it looked so familiar. My buddy just moved from the complex on the next block about 6 months ago. I sold him my C5 ZO6 which he kept in one of those garages after I bought a '19 C7 Grand Sport. Looking forward to you doing some more work on the Z,
Sounds like OBX has the same mentality as Speed Engineering: "Sure, it should fit." In terms of the final result, that sounds like the perfect daily. Not unbearable at idle, quiet while cruising, and it has a sharp and throaty bark when you get on it. I didn't realize those had 518 hp stock! As an aside, love this channel!
Man, that's best AMG V8 i've ever heard. I'm also so jealous of your exhaust fab skills and tools. Great work, bro!
I love the explanations you give as you go. Awesome!
You have become one of my top 3 KZheadrs I watch! Keep up the good work!
Straight up Honesty, being a mechanic or hobbiest looks so peaceful and joyous on youtube.
great vid. what a car. i always love it when a bolt falls somewhere in between and have to search for it, so much fun! keep up the good work. greetings from the netherlands
Chris I really love your channel and content. You have got one hell of a stable of cars my friend!! Well done
This guy deserves way more attention, love his videos
Love the video Chris! Keep up the great work! Can’t wait to see what’s next :)
Great Job on the work. Sounds amazing, and the stainless steel looks awesome!
That’s killer man….def felt your frustration during the install! Sounds awesome
Wow, normal I hate guys which tune the original m156 exhaust but this with original middle and end exhaust sounds really good, the best tuned m156 exhaust I ever heard! Greetings from Germany.
I appreciate everything that you do and you show us the ups and downs to the car culture. You sow us the ugly/ funny side of it
What amazing timing... was literally just watching m156 videos. Love the content as always. :)
Great vid, love the car and sharing the frustrations getting those headers in there.
dropping a nut or bolt into the abyss is always such a joy lol. really well done for pushing through, inspiring!
Pro Tip: take the valve covers off to reach the top header bolts. I have an 09 and instead of bamming on the header, I just custom made another steering shaft because that's where the interference was, unlike your car where it contacted the body. I'm almost positive those headers were made for 07-09 W211 E63 because there aren't any fitment issues like with your car. As far as the flared flange on the x-pipe, all you had to do was cut that part off and it would have slipped in like stock.
Love the content. I grew up right there by pease too. It’s cool to see all the back roads I used to drive on.
The Greatest phrase ever said,”While your in there “ my father would say it over and over. To here you say it brings joy to my ears. Telling customers this I always makes me remember my dad pointing his finger at a part😂😂😂😂😂
Nicely done. Sounds awesome! Please post a drive by so we can hear how it sounds at WOT.
Love your work! Really well done, she sounds so lovely. You've inspired me to do this on my SLK55, which I'm sure will be similar knuckle bashing to get to the header nuts and studs. All worth it in the end!
Keep firin' Chris. Big fan of this project
My e90 m3 came with the primary cats removed and it was quite at idle and rowdy at 8k rpm. It was a great daily setup. Your e63 sounds great!
Outstanding Achievement especially for doing your own work. Great Job
Great content man and you make the fab work look so easy
Awesome video as always. I've been there too and feel your pain. Some of the designs to remove and/or install stuff is an absolute nightmare.
I have a w212 e350 and have always wanted an e63. This definitely pushes me closer to getting one. Impressive job on the exhaust. 👍🏽
Sounds amazing! Nicely done...👍
Great video and the car sounds sick I love that amg snarl. On my next car I am definitely doing headers before any other component in the exhaust system.
I've been waiting for this. Love the sound. I bought my 2011 a little over a year ago. The exhaust had already been modified. It has magna flow resonator and mufflers but honestly I don't like the way it sounds. The stock sounds more aggressive
the dopest e 63 6.2L From one amg owner to another absolutely sick
The sound is so lovely to hear
Not deleting the resonator = No drone happiness! Thanks for using gear that records stabilized footage. I didn't get violently ill watching your video. Subscribed!
Sounding sweet, For sure not the correct exhaust for this car, but your becoming the master fabricator of the exhaust systems and making it like it's suppose to be, great work Chris.
It sounds so much better than any c63 with Headers ! Perfekt setup, i‘m jealous
Like the way Chris works his attention to detail and they way he keeps the work area clean reminds me of M539 Renovations. Keep up the good work.
Thanks 👍
dude great video, my dads got a Z06 too so ima check ur stuff on that too, your making me wanna do my headers on my c63 amg now as well and if the engine is as tight as the e ill prob just get it done my self, anyway keep up the great work man!
exactly my setup. great choice bro. no drone IS the main thing. sound is sick when on throttle :)
You keep a nice clean garage I like the way you did the floors I like your contact too
Thing sounds insaneeeee. Great work!
Good job chris as always.
best sounding AMG on KZhead great work
This is the way an AMG suppose to sound. Very nice Chris.
the perfect way to have exhaust! I looked for all the same characteristics on my turbocharged frs 👌🏼 loud when on it, quiet as stock when cruising, and no highway drone! I have a 3in custom exhaust, recirculated wastegate, one vibrant resonator and an electronically valved muffler (for the cops, I live in southern california lol)
wholesome content, best YT channel out !
Loving the AMG content, Chris! Thanks for documenting. Hopefully one day I’ll get an M156 C63 to go with my E55 😁
You wanna trade and add some cash
If you think an M156 is going to be as reliable you're in for disappointment lol
@@InsaneBimmer never that lol the M113K is goated. Just want to experience both of the legendary engines 💪🏼
Excellent video! Beautiful AMG!!!
This thing is sick, sounds similar to my 2008 s63 amg with an M156, i have stuff done to mine but for exhaust i only have long tube headers, nice build
Super sick video yeah I have a 2010 E550 black one all blacked out like a brother car of yours I just pulled off the back resonators and it sounds sick obviously not like the 63s with headers but they are some sick sounding V8s looking forward two more videos you got a great Channel going
Same thing when I did LTH on my tundra, headers went in fine but tightening the nuts took FOREVER!!!!! I had to use 1/4" socket and extension to 3/8" extension to my 3/8" ratchet to tighten them down then go and warm the engine up and let it cool and re-tighten them again.
...awesome job, really well done !
Love your content, best channel on yt 👏
Sounds perfect, nice for daily then when you hit it the monster awakes😮💨🤘🏻🤘🏻
just found your channel, and im already liking your content
There is nothing that beats the sound of a massive engine under heavy acceleration! My former 409 , 396 and 454 were so impressive in their day. Sure beats the rice burners !
Great content buddy keep it up seriously
Thats sounds soo good...eargasm!!
Awesome video brother! It sounds like a beast. (Checkout your 3rd/ back window brake light, I think one or two of the leds are out.)
Dude!! Awesome work!!
Beautiful ride man.
That thing sounds pissed off. Excellent work.
Very nice work my friend! I need to do the VRM on mine as well. Imagine getting the exhaust manifold bolts on the C63... even less room!
great vid! i know hindsight's 20/20 but...... those motors drop out the bottom so easy (once you take a look and see what your working with as far as lines/etc) a couple jack stands,your hoist and you can sag the kmemeber down to give loads of access without completely removing it. another option is to support the motor and lower the kmemeber slightly, a couple inches of clearence make the job so much better. ive removed/installed many benz drivelines and i feel your pain on the manifolds. all that being said killer car, i miss working on AMGs they are beasts.
Have you seen any videos that show what your talking about for 63? About lowering the kmember to get the headers in and out easier?
@@RadFox1320 nope but to honest never really searched it out, when we were big into them at my shop, we had the luxury of a hoist and a 3 ton overhead crane/trolley. Raise the vehicle, have the motor suspended by the over head and used an air table to lower the k-member. I get not everyone has access to that kind of set up. But it’s definitely possible. I drop c5/c6/c7 vette crossmembers with jack stands and a floor jack to do cams,headers etc
It sounds like the E63s that were in the V8SC series which is AWESOME 👌
I hope you check the flatness of new header where sit on the exhaust ports. If not flat can cause the exhaust screws to come loose, broke or stripp of the thread. Also turn 180° Vband to hide long portion of the screw to the belly of the car to avoid it can hook up some road stuff’s Good mod to your nice E63!
that smile when you turn up to the highway... is what we all do it for :D
Im so glad youtube recommended me your channel
Nice work on the AMG. But I love your Vettes way more.
great video , loved the fab work . great work
Great video man. Headers can be a total drag...getting ready to install Kooks 1 3/4" on a Terminator and I'm dreading it. Nightmarish design, but it's all apart of the fun!
Absolute Banger Perfect car best DAILY Ardent exhaust in Arizona has great kits
Sounds really really good
Electronic cutouts before the resonator??? Hahaha Love the videos!!!
Sounds beastly
Another great video Chris!
This sounds great 😱👌🏼👌🏼 no sharping only dark growl
I feel your pain! I spent 3 days trying to get my cheap headers on my 05 E500. I think the problem is Mercedes uses the same motor in multiple cars and the companies don't account for the smaller C the Medium E and bigger S and also that the motor was used in the previous Models of E class. All they do is mass produce for the motor.
Sounds amazing!!!
Love how everything is SOCK ROLID and it sounds good! What funny is you looked like my another favourite KZheadrs, Sreten from M539 restoration 😆
I've been looking for one of these for a while now. They're the epitome of what a high performance sedan should be and they just don't make them like this anymore. I owned an E39 M5, bought straight out of the lease program in '03. Great car but with a lot of very unique and expensive issues but even with all that, getting the car on the road always put a smile on your face. They (BMW, Audi, Mercedes) engineer these cars for road comfort, low NVH and air tightness. Every panel is backed with jute... lots of attention to minimizing cabin noise. IMO... and I'm getting older now... exactly what you want for a daily.. something you can actually carry a conversation on while driving at speed. Only downside for me and this car is lack of manual transmission.. but when you consider the other options of the era and their reliability issues? Keeps you coming back to this model.
Look at reliability and high mileage cars vs the e92 m3 and come back to me
Sounds awesome
I’m so glad I don’t work on cars 😂😂😂 it’s awesome to watch this guy do all the work himself tho, it came out amazing man!
hi I'm from Germany and I'm watching your video right now. Most Germans, like me, are very perfectionist and I'm currently at 9:15 and I think it's super cool that you're thinking about what you could do right away because it could happen a short time later. You see something like that very little and normally I hardly write any comments either, but here I thought I had to write briefly😁👍🏻 that actually has no relevance to the project and to KZhead. but here you can see that it's important to you and not just, "ah, the main thing is that I have a new video for KZhead". So now I'll keep watching your video😁😋 I worked at a Mercedes workshop myself and I can relate very well to how you felt 😆 I always wished I could do telekinesis with things like that so I could thread "that one stupid screw" without breaking my hand... Depending on the mileage, I would have changed the spark plugs when everything was removed anyway. But otherwise very well done! the car sounds really awesome. I loved this engine. Unfortunately we only had 2-3 customers who had the engine (2x C 63, 1x an E63 but this was only once in our workshop), we had another branch and most AMGs were repaired there. They also had all the special tools for the vehicles there. That's why most of the time we only had the "normal" Mercedes with us, unfortunately. But they had a few V8 or V12 engines there too, which was always cool too.
Thats how the 6.2 has to sound.. greetings from Germany 🇩🇪
So so nice such a great sound oooo man
Best sounding car ever created 🔥🔥🔥👍
very nice benz, have fun with it
Nice work brah. Going to do this on my 09 CLS 63 eventually. I need to level up my fabrication skills first. You teach yourself to weld or did you have a sensei? Enjoying the channel.
Damn that sounds awesome!
No drone in the cabin!! Great Job!!!
29:11 i love that sock rolid word lol
Sounds Frosty 🥶