Much better alternative than other solutions I've seen. Well done!
@Erik_The_Viking Жыл бұрын
This is better than the alternative I've seen elsewhere.
@WPGinfo Жыл бұрын
Thanks for the inspiration. I like this design as it raises the height of the bench when stationary, and lowers it when onto casters when needed to be moved. Most other designs do the opposite. This will work with my plan to create a nesting pair of work benches that when deployed are the same height, but when put away, one slides under the other. Essentially, I will create a mobile workbench for my table saw, that when not in use can be lowered onto casters and slide under the out-feed table/assembly workbench.
@jon_craftingo.o4686 Жыл бұрын
SOOOO good to see you again buddy and glad to know you're still at it. I had to go visit my sick father 1000 miles away and JUST got back so I missed this video launch but I'm getting caught up now and yours is the first I watched. I LOVE this table...I really need something that can serve as out-feed when I need it. The new counter sink bit is nice and I really like the new tools as well. I'm seeing a few new video techniques as well that are pretty sharp. Take care friend and be safe.
@rolandgdean Жыл бұрын
Great idea! I was wondering where you've been, very glad to see another video. I hope you and your family are all well my friend!
@tomowens2720 Жыл бұрын
great idea. good see you back, missed you. hope all is well with you & family
@JohnColgan. Жыл бұрын
Très ingénieux. Bravo! Je vais adopter votre idée pour mon établi à roulettes pivotantes. Merci
@RouenEchecs Жыл бұрын
I like this system very much . I'll copy it :) Thank you for sharing.
@AncoraImparoPiper8 ай бұрын
오랫만에 영상올렸네요 날씨가 더운데 만드느라고 고생했어요
@user-hf5hq1nm8u Жыл бұрын
Good idea but would be hard to lift if anything on the shelves/ top. Maybe a lever handle! Thanks for sharing.
@erictheviking67211 ай бұрын
No es chapuza!! simplemente es una buena salida y barata para solucionar un problema en tu taller de trabajo👏👏
@jesusmanuelbrionesmedina757817 күн бұрын
OMG is vvveeeeerrrryyyyyy nice job 👏👏👏👏👏👏 Super wordy
@juliocalvo1940 Жыл бұрын
Very good design. The only problem for me would be that I have to lift the table first with my hand in order to activate the system with casters. Thank you anyway for sharing it.
@rosariomusumeci9724 Жыл бұрын
Clever and easy to use upgrade! 👍 😃
@jamesbarisitz4794 Жыл бұрын
Much better system looks a lot sturdy than when it was rocked to much when it was just the wheels on the floor 😀👍
@paulstanding7267 Жыл бұрын
Good to see you!!!
@Grassy20 Жыл бұрын
I just did the exact opposite on a table saw. I mounted wheels on the added section.
@markwillride3 ай бұрын
simple, pratique, excellent !!
@regisfourcade7145 Жыл бұрын
굿 멋있어요~~
@horangnabee3334 Жыл бұрын
Simple and effective!
@JoseSilveira-newhandleforYT Жыл бұрын
Neat idea
@MrGeroth Жыл бұрын
Clever solution👍
@Miloumannen Жыл бұрын
Load capacity how much is it 200kg
@hudsonsyhly26938 ай бұрын
Good solution!
@ziiluduz Жыл бұрын
this is stronger solution than other lever action!
@kabaottoemulsion18693 ай бұрын
Very simple solution. 👍🏻
@nobuckle40 Жыл бұрын
@J-woodworking I just finished implementing your solution for my small 6" jointer stand. My shop is very small and the place where the jointer is stored has severe height limitations. So placing the casters on the moving parts was not feasible. This solution turned out exactly what I needed. Thanks for a super useful video!
@rafaelmijares9197 Жыл бұрын
Simple, work maximum and low cost Brilian idea 👍
@woodcreationwithMudita Жыл бұрын
Спасибо!
@Kot-Bazilio Жыл бұрын
Супер идея спасибо
@viktorkrapp5574 Жыл бұрын
Nice!
@69kaveman Жыл бұрын
Boa ideia. Eu faria ao contrário. Instalar os rodízios na parte móvel, assim, daria mais estabilidade à bancada.mas
@asteriovieira3587 Жыл бұрын
مبدع 👍
@user-mz9vy4wj5g Жыл бұрын
ㅎㅎ 이중기리 바꾸셨네요
@user-ssrshin Жыл бұрын
나는 멋지다. 나는 멋지다. 칠레에서 인사말 🇨🇱🇨🇱🇨🇱👍👍
@Panchosoto Жыл бұрын
What is the function of the hole in the block?
@anisawrusАй бұрын
👍🏻👍🏻👍🏻
@koccocarrasco5696 Жыл бұрын
👍👍👍👍
@user-cd6qz4rd1t Жыл бұрын
sure
@WoodworkingStudio Жыл бұрын
I have added wheels to tables, but this method of adding the solid leg extensions is a MUCH better method.
@mikewelch39033 ай бұрын
Идея хорошая. Но почему нельзя сделать на постоянной основе? Зачем все время увеличивать и уменьшать высоту верстака?
@unclegluk1278 Жыл бұрын
That's a pretty light workbench. This is going to be a bit harder when the bench weights 3-500lbs.
@espressomatic Жыл бұрын
👍👍👍👍👍👍👍
@user-dy4xh8rf6w Жыл бұрын
Brilliant but, drywall screws? Ick.
@rivernet62 Жыл бұрын
Did you put that on both sides? Or just on one side?
@eikestrumpelmeyer Жыл бұрын
both
@regisfourcade7145 Жыл бұрын
@@regisfourcade7145 thx 4 Ur answer
@eikestrumpelmeyer Жыл бұрын
USE the right size SCREWS
@Don-dc6hy Жыл бұрын
Yeah, nice idea. However, those casters are too small for the weight of that bench. You’d be better off with 3” or 4” non-marring casters. They will roll so much more smoothly. Also, on the retractable leg lifters, go ahead and sculpt out about 2” high by 3/4 of the length of that supporting bar attached to the two temporary leg lifts. This will allow your foot to slide under that supporting bar to pull it out easier without having to lift the bench so high. Otherwise, nice idea!
@WeGoWalk Жыл бұрын
Those casters are rated well over 100 lb each, and that bench is nowhere near 400 lb. Plus, they aren't subject to dynamic loading... Just rolling into posi.
@rivernet62 Жыл бұрын
IRL it'll stand on one place 99.9% of time (if not 100%) )
@tomekvilmovskiy6547 Жыл бұрын
Очередная херня. Чувак - откидывающимися надо делать колеса, но с нормальной фиксацией. Задумайся - чем ты больше пользуешься (работой на верстаке или катанием его туда-сюда) и что важнее. (machine translate) That's just more bullshit. Dude - you have to make the wheels hinged, but with a normal locking system. Think about what you use more (working on the workbench or rolling it back and forth) and which is more important.
Much better alternative than other solutions I've seen. Well done!
This is better than the alternative I've seen elsewhere.
Thanks for the inspiration. I like this design as it raises the height of the bench when stationary, and lowers it when onto casters when needed to be moved. Most other designs do the opposite. This will work with my plan to create a nesting pair of work benches that when deployed are the same height, but when put away, one slides under the other. Essentially, I will create a mobile workbench for my table saw, that when not in use can be lowered onto casters and slide under the out-feed table/assembly workbench.
SOOOO good to see you again buddy and glad to know you're still at it. I had to go visit my sick father 1000 miles away and JUST got back so I missed this video launch but I'm getting caught up now and yours is the first I watched. I LOVE this table...I really need something that can serve as out-feed when I need it. The new counter sink bit is nice and I really like the new tools as well. I'm seeing a few new video techniques as well that are pretty sharp. Take care friend and be safe.
Great idea! I was wondering where you've been, very glad to see another video. I hope you and your family are all well my friend!
great idea. good see you back, missed you. hope all is well with you & family
Très ingénieux. Bravo! Je vais adopter votre idée pour mon établi à roulettes pivotantes. Merci
I like this system very much . I'll copy it :) Thank you for sharing.
오랫만에 영상올렸네요 날씨가 더운데 만드느라고 고생했어요
Good idea but would be hard to lift if anything on the shelves/ top. Maybe a lever handle! Thanks for sharing.
No es chapuza!! simplemente es una buena salida y barata para solucionar un problema en tu taller de trabajo👏👏
OMG is vvveeeeerrrryyyyyy nice job 👏👏👏👏👏👏 Super wordy
Very good design. The only problem for me would be that I have to lift the table first with my hand in order to activate the system with casters. Thank you anyway for sharing it.
Clever and easy to use upgrade! 👍 😃
Much better system looks a lot sturdy than when it was rocked to much when it was just the wheels on the floor 😀👍
Good to see you!!!
I just did the exact opposite on a table saw. I mounted wheels on the added section.
simple, pratique, excellent !!
굿 멋있어요~~
Simple and effective!
Neat idea
Clever solution👍
Load capacity how much is it 200kg
Good solution!
this is stronger solution than other lever action!
Very simple solution. 👍🏻
@J-woodworking I just finished implementing your solution for my small 6" jointer stand. My shop is very small and the place where the jointer is stored has severe height limitations. So placing the casters on the moving parts was not feasible. This solution turned out exactly what I needed. Thanks for a super useful video!
Simple, work maximum and low cost Brilian idea 👍
Спасибо!
Супер идея спасибо
Nice!
Boa ideia. Eu faria ao contrário. Instalar os rodízios na parte móvel, assim, daria mais estabilidade à bancada.mas
مبدع 👍
ㅎㅎ 이중기리 바꾸셨네요
나는 멋지다. 나는 멋지다. 칠레에서 인사말 🇨🇱🇨🇱🇨🇱👍👍
What is the function of the hole in the block?
👍🏻👍🏻👍🏻
👍👍👍👍
sure
I have added wheels to tables, but this method of adding the solid leg extensions is a MUCH better method.
Идея хорошая. Но почему нельзя сделать на постоянной основе? Зачем все время увеличивать и уменьшать высоту верстака?
That's a pretty light workbench. This is going to be a bit harder when the bench weights 3-500lbs.
👍👍👍👍👍👍👍
Brilliant but, drywall screws? Ick.
Did you put that on both sides? Or just on one side?
both
@@regisfourcade7145 thx 4 Ur answer
USE the right size SCREWS
Yeah, nice idea. However, those casters are too small for the weight of that bench. You’d be better off with 3” or 4” non-marring casters. They will roll so much more smoothly. Also, on the retractable leg lifters, go ahead and sculpt out about 2” high by 3/4 of the length of that supporting bar attached to the two temporary leg lifts. This will allow your foot to slide under that supporting bar to pull it out easier without having to lift the bench so high. Otherwise, nice idea!
Those casters are rated well over 100 lb each, and that bench is nowhere near 400 lb. Plus, they aren't subject to dynamic loading... Just rolling into posi.
IRL it'll stand on one place 99.9% of time (if not 100%) )
Очередная херня. Чувак - откидывающимися надо делать колеса, но с нормальной фиксацией. Задумайся - чем ты больше пользуешься (работой на верстаке или катанием его туда-сюда) и что важнее. (machine translate) That's just more bullshit. Dude - you have to make the wheels hinged, but with a normal locking system. Think about what you use more (working on the workbench or rolling it back and forth) and which is more important.