Welcome to the Scrapyard. Space Engineers where what you can't build, you must find.
Curious about the audio? We've been utilising Remaarn's Teamspeak plugin for Space Engineers to communicate with each other while getting positional audio without the glitching that is common with the inbuilt system :)
You can find it here github.com/mmusu3/SE-TS-Bridge
For the mod list head over here: steamcommunity.com/sharedfile...
You can find the videos on the making and testing of this set of mods over on / flipsie
For those of you kind enough to want to support me in making more videos: / splitsie
Discord: / discord
Steam Workshop: steamcommunity.com/id/Splitsie...
Space Engineers is used pursuant to the terms laid out in their video policy, found at www.keenswh.com/press.html
Music and Sound Effects by:
Space Engineers
Artlist.io
Maybe Name it "Scrapsie's Splityard" XD
or perhaps the clang factory
or even the heap
"why did the back end just explode" well there are only two explanations for it: a) Clang demanded its tribute b) the warehouse had superspicy mexican food.
c) Capac was hiding back there :P
@@Splitsie I’ve said it before, and I’m sure I’ll say it again, Splitsie: Without Capac, Splitsie *becomes* the Capac.
Scrap shack would be a good sign. Maybe could have the S on scrap flicker for comedic and rustic effect
17:33 Splitsie does his impression of a hermit crab swapping shells
lol :D
frosty's tent was so good!
It was epic :D
Splitsie one uping Capac here. Capac moves a medical bitter pill. Splitsle will move a warehouse..
The busses on the wheel go round and round, round and round, The busses on the wheel go round and round, round and round,
lol :D
During the competition at 37:50 the crane in the background lifting itself in the air attached to the wind turbine was funny as heck.
I just saw that!
Not sure how big you're willing to make the sign, but "Splitsie's Scrap & Shenanigans" kinda says its all. It's your scrapyard and it's where the mini games have happened.
Just for the warehouse name - quite simple, use the cross piece you have to add another line above for just two letters - MR SCRAPSIE For the offset warehouse - if you use a large grid crane connected to the aligned grid, and attach to the new one with a rotor, you can adjust you angle to a perfect 45', you can also use a hinge setup to link the grids together to share power, if that'll be any use.
Yup, Scrapsie was my suggestion as well.
40:45 The moment when Splitsie became Flipsie.
Your little tail wagging while you are pushing that warehouse is just lovely! 14:04
All i can say is... INVENTORY FULL 🤣
INVENTORY FULL 😂
INVENTORY FULL
I don't think he noticed, but his INVENTORY is FULL. XD
In van Tory full
Inventory full
If you make it 8 signs you could name it MAGYARDS for all the magnets you use for storage and moving stuff :D
46:31 Splitsie’s Scrapsies should be the name.
you know what this warehouse needs? another warehouse.
Always :D
It's so you can warehouse when you warehouse!
@@Splitsie *THE WAREHOUSE MUST GROW*
The Warehouse must grow to support the growing Warehouse Its so much more organized than bureaucracy too
warehouse squared
They dont tell you this but buildings are free, you can just take them home.
"O look a warehouse, please can I bring it home" :)
@@davidmartensson273 "It followed me home on it's own, I swear. For some parts of the journey it even led the way."
I'm all in for the large grid crane, specially in the center of the settlement so it reaches everything you could possibly want to rearrange in the future, but for this particular task positioning the second warehouse you could use a hinge instead, attatched horizontally to the 45° angle reference scaffolding to both line the grid up with the angled side and to serve as connection for both power and conveyor access (if ever needed). You could even cover the hinge with angled plating and make it look like a catwalk of some sort for aesthetic purposes
Best content in SE for a long time. So much creativity and talent together is inspiring and makes SE look easy to play. "Flip your Rover back up" could be a competition on its own merit.
Making the telehandler do a pole dance should have gotten you another point. Chat; give Splitsie a LIKE for his pole dance.
Call it “Splitford and Son Salvage”
Also, I love that “driving the WAREHOUSE under its own power is infeasible…” but towing on the other hand.. 😂😂😂
You could potentially use some combination of henges, pistons, and/or rotors with a pair of connectors (probably under the foundations) to put the new warehouse on the same grid as your main one but still at the 45% angle so you don't need independent power.
But small grid mess of tubes and connectors!
Came here to make that suggestion too! A pair of connectors either under foundations of the new warehouse or even between the 2 buildings in a cute little shed (like a pool pump shed) to hide them. Theoretically you could potentially even get away with just a single hinge to join the 2 grids.
Who knew stacking blocks could be so tensely thrilling
I imagine an illuminated neon sign saying "SPLITSIE'S SCRAP" and the last letter S flickers off irregularly 😆
Splitsie has the Lifter Handstand competition in the bag. 🤣
Splitsie over here building the world's first breakdancing forklift
27:17: "One, two, FIVE!" "Three, sir" "...three"
Suggestion! For the 45° structure, place full armor block(s) lined up with the angle you built, and then merge the structure to that. If you want it to be the same grid, line up a connector and then use a mag plate or landing gear to make it static. Loving this series!
I like "Scrapsie" Could maybe extend it to "Scrapsie's Splatyard" or simply just "Scrapsie's." Alternatively, you could use girder pieces to attach the sign, though I do like how it is now, with the neon tubes acting as supports.
i think it would be interesting if you were to utilize the "wheeled" warehouse as an actual mobile base. Add some solar panels or even a couple of wind turbines to keep it powered. You could add a piston controlled ramp to lift vehicles into it. this would allow you to collect an enormous amount of scrap and store it all.
'Scrapsie's' would be a great name for your yard.
I need more thumbs up to give, The competition was a fun watch, you may already have the new warehouse attached and static, if not, just use a hinge coming from the side to align it 45 AND give it power
I just found out about space engineers a few weeks ago and I’m loving this series and I just finished the last episode and I was thinking I’d have to wait a while before I got the next video but low and behold two days later 😂 thanks for the great content, I look forward to seeing how the scrapyard grows
If your new to it, go check out his hundreds of older videos, while some things have changed in the game a lot still it similar, and the tutorials are very good as a new player :)
A Name for the scrap yard could be Capac & Sons
Sentences I never thought i'd hear: "Why doesn't this warehouse want to turn?" 😂
U-HELL STORAGE, U-Stor, SplitPac Storage, Coate Hangars
Frosty: Well Done. Ramon (Sp?) that was so close. Sis anyone else hear Splitsie's "Noooo" echo? Next competition, Forklift/Crane hand stands? Now we need letter and numbers that glow like the neon tubes do.
The skiils of people amaze me ! Congrats guys !
You should have put the warehouse on wheels and made it your mobile base. Instead of bringing scrap back to your base you bring the base to the scrap. If the Jawas could do it, so can you. *BRILLIANT!*
The forklift/crane game was super fun!!!
After the the hours and months and even years of watching you play this game I have to just say I really want to compliment you and your ability to troubleshoot and understand the quirks of this game. It's a kin to someone who has a pet that hat3s everyone but loves you and you know how it ticks
Klang was watching all of these shenanigans real hard
Can't believe how long I was holding my breath during the competition. SUPER SUSPENSFUL!!! My fingernails were so glad when it was over. Can't wait for the next one.
I'm so glad you enjoyed it :)
This is one of those neon signs where it reaches peak quality once a couple of the letters stop working (Specifically, the two S's.)
watching the warehouse move like that is one of the most sightly things I've seen in SE, awesome!
Sign suggestion: Inset a large grid rotor in the centre of the front wall, replace with small grid head, build pole with small grid round block (pole, cylinder thing) (does vanilla have it?) build sign, slow rotation, can use both sides. Cool mod, series, game.
14:30 ... that wigling tail on your rover made my day :D edit: also about crane ... i kidna like to have rotor3-hinge3x3-piston-rotor2-rest setup and have hinge3x3+rotor2 on same key (up/down) so "rest" grid do not rotate and just change its altitude - as a result my crane is behaving more like a forklift
When splitsie phased trough the wheel i went like "does he have the phase shifter from transformers prime" 😂. Also keep up the amazing work
Two rows gives you the option to write "splitsie" on T-pieces on the top row, so you can make it symmetrical. Or make it "splitsies", add a horizontal piece to both sides and start from the left, so it's the L and E on the cross piece.
38:16 imagine this being possible irl lmao, great parking 🤣🤣🤣 Also, @Splitsie , could u please ask Frosty to upload his forklift on workshop? I really love the tiny size with it being so powerfull, and the skid steer (althought i got no clue how it works xd) is a perfect cherry on top.
Could you incorporate a gantry crane between the 2 large warehouses; and, mount another pistons/hinges/rotors crane on the middle warehouse/barn. You could also put in corrals in the 'barn' and display plushies for a 'petting zoo'. 😁
@38m so brutal, watched the blocks fall into each other at the corner like phasing and then tip over
Just everyone sitting around without knowing how many people were just >..> "Why are there wheels on the warehouse!?"
Fun episode, looking forward to next week.
My favourite sentence “why doesn’t the warehouse want to turn?!!” I think it’s because it’s a warehouse, not renowned for their turning abilities
Commercial right as the building moved...so mean... Wouldn't the Scrapsie sight light up if you weld up the neon tubes behind it and give it an 80s look?
Another future event to show the ability of the scrapping vehicles could be an hour or so competition to see who can go out and gather the most interesting/ impressive scrap stack to a central plot with the prize being a picking order of the gathered scrap. Shows skill, and vehicle efficiency and everyone gets a good prize at the end.
If you want an idea for how to attach that sign better, just take a look at the facades on places like large supermarkets. The whole building is a rectangle, but there's flat architecture on the front like it's a movie set for an old west town.
Splitsie! Your inventory! Its full! 😮
@Splitsie was just thinking... you already have a viable machine to help clear out voxels which may be worth making a second version, your lifter... what if you turn the cockpit around facing the other way.... removed the mag section, and fit on extra pistons to go above the existing ones, and added a couple of drills side by side.... this way you could clear what you need, how deep you need to and at the angle you want.... while using an already tried and tested chassis... could have some counterbalance in form of smallgrid large batteries on the rear to help with drill weight.... and if needed have the cockpit and arm on a hinge so when drilling, small outriggers clamp you down and you can rotate with ease then but when you need to move, it locks the rotor and pistons safely 🙂
I'm glad to have just gotten into SE and found this content. c:
For the name: Make the backwall out of plate, White but dirty and have an apostrophe behind the e and an S laying on the floor. And maybe have a few letters hang by a tread or just a bit more wonky as if they are falling off ;D
52:04 why not use a hinge? Place a hinge at 90 degrees, merge the new warehouse onto that so it's still mobile. Place your 45 degree faux wall and then move the hinge to align the new grid to the 45degree. Lock the new grid to the ground w/ mag plate and convert to static. For a bonus, you could possibly put the hinge under ground and backfill (let voxel cleanup fill it in). Then all your grids will share power. (I thought about doing something similar w/ a subterranean connector + event controller so I could build a charging pad for visitors that could automatically disconnect if power on my main base was getting low.)
47:00 two approaches i imagine could be viable and the second one i think the way to go 1) from the base/ground level up, replace with half blocks and half ramps, flat side outwards so you can connect letters to them on the outside, may only result in a limited name or just an acronym to be placed 2) have (small(?)grid) magnet plates attach to each other. On one side you put the letters where they attach normaly to the magnets, the other side you attach through the magnets to the building via your forklift, might end up being not quite level but that gives it characters =)
you came to mag plates yourself, why would that be a step too far?
For the sign I was just imagining a giant slowly rotating monstrosity all lit up like a vegas sign.
2:24 That text popping up reminded me of the good old times with Sage, Aaron, Tazoo and Scot.
Ah Tazoo, he was great, kinda like Capac except he knew what he was doing :D
For a name, how about something far grander than it is... Splitsie''s Scrap Emporium perhaps with a lcd sign underneath to add - And Racecourse As for the race, that was brilliant, my two favourite parts, your break dancing forklift and whoever was swinging off your wind turbine. I think you need to add a spot to add leaderboards near a permanent course maybe along with advertising for your ingame merchandise.
Maybe Crane Gymnastics could be added as a side show - probably not as part of a 'real' competition as, like real gymnastics, it's far too dangerous for casual, but something for those who want to show of their skills can have a play at?
Loved the competition... Genuinely exciting! haha..
That thing handles like a warehouse! 😂
Sign: Running along the Peaks direction, put the tubes running in the same direction as the peak, then use its tube bend to turn around and run across the front to the far ridge with the same bend and Ridge attachment. as for Name: Splitie's and below that Scrapyard to fit the series name. PS: Don't forget to have a couple tubes sticking out from above with spot lights on the sign. ... Next Challenge, The Blocks should be in difficult spots to remove them from, Like in the center of a warehouse, From a High roof , from Under a pile of Junk etc ideas
There's a power tethers mod that lets you build wire connections between grids that only transfer power. You can plug in vehicles or run power between buildings without them actually being attached into one grid.
Really makes me wish there was neon lettering and you could do the "fallout" effect of them flickering randomly to give that scrapyard vibe.
You could do a hinge connection so you won't have to worry about power, one is at the angle you want, covert the thing to a static grid and build up around the hinge to hide it, or make it look like a power line connection
For your large grid crane, it might be a good idea to either try to build it static in a place you can keep it around for other uses, or build it on large-grid 1x1 wheels on a somewhat wide platform that can move itself around the base. That way you don't have to just set something up temporarily and have to tear it all down. Sign Ideas: Scrapsie's Split, Scrapsie's Splityard, 2 Fast 2 Warehouse, Flipsie's Scrapyard (but flip all the letters upside down) Also, could you attach the sign using two small-grid mag plates that are back to back? That way you don't have to use the huge large grid ones
lol 2 fast 2 warehouse :D
Oof I needed this after this week
Great job 😊
I've used a hinge + conveyors underground to build grids offline to the main grid while still maintaining power and conveyor links.
God damn it splitsie I was going to sleep but you posted a new vid so I must watch
I recently had success running a small grid "power cable" from my surface base down to an underground chamber. I'd recommend using two large hinges to align and, more importantly, power the jaunty warehouse. Also, the cargo network can be provided to the new building via the hinges.
Every time I have a really good idea before looking it up, someone else has thought of it too.
@@noreason8064 Splitsie has done that in his Survival Impossible series where he connected multiple houses on odd angles that way but he also found that it could sometimes case some problems upon connection and he blew up the connecting parts or even grid in some cases ;)
long live the splitsie may SE fear his name
.........Splitsie's ......... ..Scrap and Salvage You flip it We strip it Definitely need to ad a small sub grid in so you can get the bottom bit on a jaunty angle in small text. then you could make it waggle underneath the title bit. and some random strobing neon and you're set. 🤨You don't need the periods those are just for filler
Hey splitsie, I see you saw my bus, when I saw the bus in your last video I wanted to build a bus. I was up until 3:00 in the morning building that bus and as my normal Scottish touch I made it fly lol. If you want the blueprint I will post it to the workshop. ps Keep up the good work
Hey Splits why don't you use a hinge to set up the 45 degree angle on the new warehouses? Pretty sure you're gonna attach it with one for power anyway (like in survival impossible) might as well set it up with correct block spacing from the start. It'll also give you the right height straight off the bat.
The sign should be like the sign for the junkyard from Engineer Corp. :)
"1, 2, 5" "3 sir" "3!"
The forklift Pogo dance was perfect. That could be a sport discipline all on its own. Hopefully together with flying carpet race done with grabby hands ;) For the sign, how about a Splat-Yard? ;) Or you could think of something australian... like Lamington? Lamington Automotive Ltd. ;) Or a reference to previous series... Spicey's Hopefully you could visit us soon. We have a special, personalised decoration that would fit nicely along that signage. As to new hangar, does it need to be same grid? Potentially you could build extended "arm" in a trench, so it ends up underground after reset, and then use connectors to share power. That would let you have a wide range of angles to try while still having it as part of same construct.
Oh, I like the idea of Spicy's scrap 🙂
Moving houses this way is only allowed in Australia 😂👍 greetings from Germany
For @Splitsie 's warehouse sign, he should consider setting up a timer or two on his spotlight on the lettering so as to make it seem like a short circuit - kinda like a dying neon sign. Nothing major, maybe once a minute or three for a couple seconds either off or dimmed for the extra ambiance and detail. Or perhaps the letters individually if possible. Sometimes it's the little things. :)
I was trying to think of a way to do that with the actual neons but unfortunately I'd need a way to depower a whole grid which once done wouldn't be able to turn back on again. It'd need a lot of spotlights to make it work (1 per letter) and I'm tempted, but not sure I'll go to that length :D
Sign suggestion. Splitsie's Brilliant Emporium
have to be Splitsie Scrapyard. Watched and Liked 👍
whoda thunk watching folks stack blocks could be so interesting. lol. it's like reverse Jenga.
I'm wondering if this would work for 2nd warehouse placement. Grind out like a 5x5 or 7x7 section in the center. Build up an interior room to where you can attach inside it a piston & rotor with wheels at the bottom. Use this to roll the building where you want it, rotate to the angle you want, then lower it in place. Convert to static and return the floor to flat. A rotating sign with something like SPLITSIE'S on one side and SCRAPSIES on the other? Maybe use corner lights at the bottom to self-light (similar to roadside billboards here in the US). It was great watching the competition. Looking forward to the next event.
She's built like a storage shed but handles like a bistro.
Don’t worry about us splits.. we listen to inventory full for 30 minutes a week.. you listen to it for 8 hours a day.. I’m sure you’re a lot more perceptive of it than we are 😀
Maybe Attach the sign a bit out and modify it a bit so it looks like a crane. As for the building maybe attach it on a hinge at 45° and then you can also have them connected with connectors for power transfer if needed, if nothing else moving it into place using a hinge seems like an easy way to get it there 😊
I have a forklift licence, and I definitely wouldn't have tried for that 6-stack.
Call it Splits And Bits, use some LCDs to make it flash and light up and what not. you can even have an LCD projecter for sales or specials like LARGE CARGO! that disappears and stuff.
In case Splitsie has *not* noticed: "Inventory full!" 😇
I think he is immune to it by now, his ears just filter it out before reaching the brain :P
More splitsie!