KZhead
Тәжірибелік нұсқаулар және стиль

Homemade Lathe Machine From Scrap Metal

Mr IMBUS
2022 ж. 29 Нау.
272 138 Рет қаралды
Жүктеу

Homemade Lathe From Scrap Metal
I used SBR20 linear rails, 2x 1000mm, 2x 600mm and 2x 300mm long
I made this lathe just for some basic turning nothing too precise.
Dimensions of metal beams are 120x200x1400mm, machine is 400mm wide, also i mount 200mm 3 jaw chuck
Homemade Lathe From Scrap Metal, DIY homemade lathe from scrap
Hope you enjoy, Like, share & subscribe!
@mrimbusyt 2022

Пікірлер

  • Very well thought out, designed and put together. You made it so anyone can make one. I'm curious though, do you ever plan on making plans available?

    @TheVersatileMindMedia@TheVersatileMindMedia8 ай бұрын

  • Impressive!

    @ZappninLLP@ZappninLLP7 ай бұрын

  • Excelente trabajo!!! Muchas gracias!!!

    @pabloparejas3487@pabloparejas3487 Жыл бұрын

  • Great thinking outside the box

    @brianjefferies-lw5fv@brianjefferies-lw5fv9 ай бұрын

  • Dear Sir, thanks for showing snippets of your lathe build. Excellent job. I liked the way you produced a headstock shaft with a bore, not solid. Do you happen to have plans… a) For further development like motorising drives and b) Actual plans for making another model of your design?

    @petermarsh4993@petermarsh49932 жыл бұрын

  • Veoma dobro odradeno! Pohvale mladom gospodinu!

    @koktelhitova5323@koktelhitova53232 жыл бұрын

    • "Very well done! Kudos to the young gentleman!"

      @fairstnaimelastenaime1346@fairstnaimelastenaime1346 Жыл бұрын

  • Good job making it work with what you can afford or salvage! Kudos! Making it happen!!!! :)

    @artmckay6704@artmckay6704 Жыл бұрын

  • Svaka ti cast!

    @peroSonline@peroSonline2 жыл бұрын

  • Nice, but Maybe finish up all welding? 🤔Seems to be tacked at some places, it could be much more stable when welding it up

    @winandd8649@winandd86493 ай бұрын

  • Nice job. We shared this video on our homemade tools forum this week 😎

    @homemadetools@homemadetools2 жыл бұрын

  • Good work,you can be proud of your work, looks nice.

    @sport1349@sport1349 Жыл бұрын

  • Maybe he did use some new parts but, what he did was really quite impressive.

    @steveforbes8287@steveforbes82878 ай бұрын

  • Svaka čast

    @ToolTestHQ@ToolTestHQ2 жыл бұрын

  • Sempurna ! Saya sangat menyukainya !!!😍

    @kamsiah5110@kamsiah51102 жыл бұрын

  • Well done 👏 ,it's a commendable skill

    @michaelbabatunde3915@michaelbabatunde3915 Жыл бұрын

  • Show de bola ⚽️muito bom 👍👍👍👍👍

    @joseneriacoemel9825@joseneriacoemel98252 жыл бұрын

  • Those are some good pieces of "scrap" metal✌️😂🤣💚🇬🇧🌱

    @marca5883@marca58833 ай бұрын

  • Excelente diseño, y muy bien heho el montaje, muy ptofesional, 👍👍

    @luischaves5128@luischaves5128 Жыл бұрын

  • 👍👍👍

    @natsumusachihiroaki@natsumusachihiroaki6 ай бұрын

  • Be proud of your lathe!

    @Neklar@Neklar Жыл бұрын

  • bravo majstore,pozz iz Slovenije

    @uroskos8615@uroskos8615 Жыл бұрын

  • welldone, im impressed

    @Rikus1971@Rikus1971 Жыл бұрын

  • Excellent

    @electronic7979@electronic79792 жыл бұрын

  • support to you friend

    @handokohawachannel8731@handokohawachannel8731 Жыл бұрын

  • Esta super En poco tiempo va sacar el doble provecho. Saludos

    @fausmartinez6342@fausmartinez6342 Жыл бұрын

  • Great job

    @rotating-alfadiq@rotating-alfadiq Жыл бұрын

  • Bravooo e super strungul

    @iliepana225@iliepana225 Жыл бұрын

  • nice work

    @SkillfulMan@SkillfulMan Жыл бұрын

  • Good 👍

    @TrumpDonal@TrumpDonal7 ай бұрын

  • Interesting project but using pillow box bearings could be a problem they are totally inaccurate. Too much slop in that type of bearing should use a pair of angular contact ball bearings 72xx be type works for me!

    @markmilam3152@markmilam3152 Жыл бұрын

    • Good point……he does have a Precise lathe for close tolerance work so it doesn’t matter this is just a video not a do the build like this or else!

      @scor440@scor440 Жыл бұрын

    • @@scor440 I can't stop laughing due to your comment 😂👍

      @murraychadwick9362@murraychadwick9362 Жыл бұрын

  • Parabéns ficou show de bola 👏👏👏👏👏

    @voodetraike1172@voodetraike11722 жыл бұрын

    • Estes trilhos, onde consigo comprar? Lojas etc.

      @walfredwalterkischkel4642@walfredwalterkischkel4642 Жыл бұрын

  • Super 👍👍👍👏👏👏🇵🇱

    @piotrnapieraa5422@piotrnapieraa54222 жыл бұрын

  • That's impressive my dude! Love it... I'll have to check it out in person ;)

    @Unknown-rl1eu@Unknown-rl1eu2 жыл бұрын

    • Sure, naleti kad god hoces! :)

      @mrimbusyt@mrimbusyt2 жыл бұрын

  • what is the name of the aluminum elbow for the sliding rail? and where to buy it? You made it very well. thanks.

    @fachrulsystem@fachrulsystem Жыл бұрын

  • TOP PARABENS

    @garagemsucatas@garagemsucatas Жыл бұрын

  • Very nice

    @davethurston753@davethurston753 Жыл бұрын

  • Respect

    @pjgrobler@pjgrobler Жыл бұрын

  • Really a nice job. All the right pieces including some that were not scrap. Very rigid. Two things we almost never see in this kind of DIY project: cost and precision. It would be very interesting to see the money spent on scrap metal and purchase parts, separated. Test precision by placing a ground round bar between centers and run a test indicator down the bar once along the top and again along the side.

    @ThisIsToolman@ThisIsToolman Жыл бұрын

    • You always wonder ! What costs More !??

      @davidwillard7334@davidwillard7334 Жыл бұрын

    • Hello, total cost was around 600-700$ Chuck was 150$, rails around 250$, pulley around 25$ each and steel parts at scrapyard 150$ and a lot of screws... Best option for sure is to buy regular lathe😅 but i have realy small workshop and i dont need too high presition for my projects. Also regular cheapest normal sized lathe in my country is anywhere from 3000 to 5000$😅😅 Also thank you for commeting have an nice day!

      @mrimbusyt@mrimbusyt Жыл бұрын

    • @@davidwillard7334 ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

      @1islam1@1islam1 Жыл бұрын

  • Is very good

    @ngoielandumb1489@ngoielandumb14893 ай бұрын

  • You are awesome!

    @alextrezvy6889@alextrezvy68892 ай бұрын

  • Where did you buy the ways? How do you lock the tool carriage down?

    @oiu7890@oiu7890 Жыл бұрын

  • Good Work. Much better quality can be achieved using couple of tapper roller bearings in head stock!!

    @ratandapsi4260@ratandapsi42602 ай бұрын

  • Boa tarde) vc faz desse torno pra vender? Valor????

    @franciscodeassisvieira7584@franciscodeassisvieira75842 жыл бұрын

  • Good

    @vahidtaherkhani921@vahidtaherkhani9217 ай бұрын

  • Complimenti spettacolari...ma ti ricordo che il tornio ha anche la contropunta..la farai a suo tempo?

    @simonefrancalanci4644@simonefrancalanci46444 ай бұрын

  • Yeah, right - "scrap" metal - shiny rollers and guides from China.

    @dnomyarnostaw@dnomyarnostaw Жыл бұрын

    • Yeah? What, you want him fabricating linear rails himself?

      @user-cg3em4cw4f@user-cg3em4cw4f5 ай бұрын

    • @user-cg3em4cw4f No, just get quality stuff from Japsn, Korea, or the USA, which actually is built to specification and won't make a mess of his jobs.

      @dnomyarnostaw@dnomyarnostaw5 ай бұрын

    • @@dnomyarnostaw Ah, I took it as one of those comments complaining that technically the rollers weren't scrap. My bad, definitely true.

      @user-cg3em4cw4f@user-cg3em4cw4f5 ай бұрын

    • Главный параметр любого станка - это ЖЕСТКОСТЬ , а алюминиевые направляющие не могут обеспечить необходимую жесткость ....

      @user-mo4ex1np2x@user-mo4ex1np2x4 ай бұрын

  • So washing machine motor powers this? So household voltage?

    @blue32nu@blue32nu Жыл бұрын

  • Congratulations!!! That is a very beautifully built machine.

    @gwharton68@gwharton68 Жыл бұрын

  • Muito bom

    @josefranciscodesousafranci8128@josefranciscodesousafranci8128 Жыл бұрын

  • Hello! What kind of bearings?

    @dorinbodea3614@dorinbodea3614 Жыл бұрын

  • Buy tabriz lath machine This is the best machine factory in the world Iranian lath machine are best

    @user-rc7nu7js5o@user-rc7nu7js5o Жыл бұрын

  • Indeed scrap metal 😂

    @kk2ak14@kk2ak14 Жыл бұрын

  • What is the purpose of the smaller (300mm) rails? Why it is not enough to have longer (lower) rails in left/right direction?

    @alextrezvy6889@alextrezvy68892 ай бұрын

    • Hi, purpose of the smaller rail set is for making cone and other stuff under some angle, whole plate with rails rotates around bolt in middle. Also so i can adjust paralelnes of machine. Thank you for watching! 😁

      @mrimbusyt@mrimbusytАй бұрын

  • Как спустя год ведет себя станок, вылезли ли какие нето болячки?

    @user-ps6ci5vo5d@user-ps6ci5vo5d6 ай бұрын

  • А регулировки были?

    @user-xg1jg5zu6q@user-xg1jg5zu6q Жыл бұрын

  • Very good

    @sport1349@sport13492 жыл бұрын

  • AND SUCH A HOME-MADE MACHINE CAN BE MUCH MORE THAN MANY PURCHASED. I KNOW FROM EXPERIENCE

    @kulebyakinjoe@kulebyakinjoe2 жыл бұрын

  • so where did you find scrap rails and screws?

    @waynethomas3638@waynethomas36382 жыл бұрын

    • And Welder ! / Rod ! Too ??

      @davidwillard7334@davidwillard7334 Жыл бұрын

  • Assalamu alaykum very good

    @UZB_TEXNO_GROUP@UZB_TEXNO_GROUP2 жыл бұрын

  • Di ti je ona iz lidla parkside stupna

    @matkozlatko1924@matkozlatko19242 жыл бұрын

  • Інтересний станок,а розміри його можна.Дякую...

    @user-fw2li3il5d@user-fw2li3il5d Жыл бұрын

  • ovako seksi video se retko vidja, pozdrav iz srbije

    @jozanbozalo4021@jozanbozalo40212 жыл бұрын

  • Хотя бы болгаркой пришабрил соприкосновение плоскостей профиля и направляющих, а то просто силой притянул их типа и так сойдёт...

    @iron9564@iron9564 Жыл бұрын

    • так этот станок без претензии на высокую точность, а значит и шабрить там смысла нет! рез чистый без биений, без дроблений, а что еще надо от самодельного станка...Там пришабривать бесполезно так как от сварки вся рама винтом и горбатая.

      @romanbelov2989@romanbelov2989 Жыл бұрын

  • this lathe need tailstock)

    @hellpatrol7130@hellpatrol7130 Жыл бұрын

  • Convert into...CNC

    @yatinpanchal3060@yatinpanchal3060 Жыл бұрын

  • Эти линейные подшипники очень слабые для станка, там пластмассовые детали, никогда не делайте так . Это не будет долго работать

    @Garage611@Garage611 Жыл бұрын

    • И шпиндельные тоже.

      @user-bq9mb7rk8g@user-bq9mb7rk8g Жыл бұрын

    • И не говоря о том, что в самоделке нихрена не отшлифовано и не отфрезеровано, никакой проверки на биение и параллельность, нет нормальной продольной и малой продольной подачи, нет ходового и винта и валика, нет нормалтной регулировки скоростей, нет лимбов

      @notsubto1547@notsubto15474 ай бұрын

  • They told me that this system is not good as a lathe but only as a cnc. Working with steel it is very easy for everything to break because it has no cutting power and the system is destined to last very little as well as not being safe for safety. I am trying to partially replicate your project but everyone is not recommending it to me. Do you have any work that is a bit more strenuous in order to appreciate that everything works fine? Thank you in advance :)

    @markred4112@markred4112 Жыл бұрын

    • Sounds like the factors you are discussing are rigidity and dampening. Yes, this type design would have poor dampening. However it lends itself to be epoxy granite filled which will solve that. Secondly is the cross slide. This setup will have limitations on the depth of cut you can take. You will need to be weary of tool pressure. Other ideas to improve rigidity would be square linear rails, 30-35mm would likely do or even better yet box ways but this requires a way to precision grind and/or scrape.

      @kstinson@kstinson Жыл бұрын

  • Great video, disappointing that you say made from scrap but then you stick brand new inline rails on there.

    @apillion9784@apillion97848 ай бұрын

  • Scrap huh,what is that about $5000 worth of scrap.if I had that kind of scrap I’d just go buy new lathe’s

    @barrykilts4506@barrykilts45065 ай бұрын

  • Why so many dislikes? You done a great job mate

    @ivangamer8022@ivangamer8022 Жыл бұрын

  • What's the precision of your lathe?

    @HaasMill@HaasMill Жыл бұрын
KZhead