Precision Saw Sled
A saw sled carries your work past the table saw blade, boosting accuracy by eliminating the friction that plagues an ordinary miter gauge. Nick shows how to get even more precision; how you can easily adjust a cut to with a few thousands of an inch or hundredths of a millimeter. And in addition to being more accurate, sleds are also more versatile. Nick discusses the types of sleds you might build and shows the features you might pack into it -- fixed and adjustable fences, stops, guards, auxiliary surfaces, even a convenient storage cart.
Detailed plans for the saw sleds and features that Nick shows, are available at workshopcompanionstore.com/pr... .
To see all of our videos and SUBSCRIBE for more, see: / workshopcompanion
Also visit the WORKSHOP COMPANION GENERAL STORE where we offer a wide selection of Nick's BOOKS and PROJECT PLANS in digital format: workshopcompanionstore.com/
Pick up one of Nick’s books FREE just for visiting!
To follow us on social media, try:
FACEBOOK - / workshopcompanion
INSTAGRAM - / workshop_companion
Our Music is Licensed through Epidemic Sounds - www.epidemicsound.com/referra...
And thank you so much for your time and interest!
In any archive of human knowledge, this man's entire video catalog deserves to be preserved above most anything else on KZhead or news article.
I don't even work with wood, much less own a saw, and I still really enjoy watching this channel because this sir has an extraordinary knack for explaining things.
Well explaned thanks for all the details
I'm I'm the same boat. I do aspire to have a workshop of my own. Just something to use for hobbies. Regardless of whether I ever use what I learn in these videos, they're still such a pleasure to watch.
Not just the explanation, but his delivery and voice too. He's nice to listen to.
Detailed instructions on a magnificent saw sled delivered with comedic nuggets like, "it is not really that hard to make. It certainly easier than gluing your fingers back on".
Been woodworking for 9 years young. Dunno how I only came across you these past few months having thought I’d seen everyone who is anyone on YT. Now you’re the first port of call daily! Thank you for your content and awesome instruction.
Most welcome -- and thank you for the kind words.
I’d just like to echo what a lot of people have said - your explanations are great, Nick. It’s almost like listening to someone tell a story and is possibly the best style on the internet. I think I’ve learnt a lot from this channel - not just about woodworking, but also about transferring knowledge and information, so thank you for that also.
Most welcome.
"Theres even a slot for your semi retired miter gauge " and that smirk was hilarious. Just came across this channel and wow, did I hit a goldmine of information. Thank you!
Most welcome.
Undoughtably this is the most comprehensive saw sled build video I’ve seen. Your presentation is as precise as your finished product. I’m not aware of another saw sled video that includes a good storage idea like your sled cart/caddy! That is a great option because it will take less floor space than wall space to store multiple sleds. Good ideas, great job. BTW, that was worth a good hammer twirl!
Many thanks.
undoubtedly*
@@christopherdean1326 no he's taking about making pizza. It's undoughtably
@@RoshDroz talking?
@@WorkshopCompanion yeah this sled is definitely not some half-baked KZheadr idea. It will definitely see some yeast on the shop flour.
I’ve been a woodworker for 50 years, and I’ve never mastered the hammer spin. Glad that there’s mountains left to climb.
I bought a cheap table saw at a garage sale. I made a double sided sled and made every cabinet in my house. Best tool I have had now over 10 years.
What a clever sled.
Damn, this is probably the best table saw sled video on the platform right now! Definitely gonna do this ASAP to complement my existing sled. Thanks for putting out such a concise tutorial. Lots of ideas for me to consider.
Thanks for saying.
Outstanding explanation and demonstration of this jig, it’s on my “to build list”!
Thanks for aying.
Best woodshop class EVER.
What a superb presentation! No "ums" nor "ahs" and no waffle. Just clear instructions and reasoning to make a superbly versatile sled - and in both metric and imperial too. I haven't enjoyed a KZhead video so much for a very long time! Subscribed!
Thanks...and welcome!
I am a joiner by trade for many years now and even at 60 years old I still like watching videos about joinery you never know what you can learn and I must admit I did learn a few things and I like to see other people’s workshops the only thing I will say is about your converting Imperial into metric it’s millimetres in metres not centimetres l must admit when l go out to buy things at the shop here in the uk 🇬🇧 they put centimetre’s and feet which then I have to convert l was lucky when I grew up with my dad who was a joiner as well he would work in feet & inches and I would work in millimetres in metres so I had to learn to convert them? But it has had it been useful thanks for your advice and videos stay safe 👍😊
I agree - I grew up in the 50s and 60s so I used imperial but learnt metric and when I started work I worked with older guys who only knew imperial, so I can easily switch between the two systems (I even combine them when it suits me), but I was also taught to ignore centimetres . . . they are for cloth workers such as dressmakers and curtain makers . . . so I find myself “thinking” to convert when I hear ‘8 centimetres’ instead of 80 mil.
The single most helpful and universally applicable hint in this entire video might be the genius use of blue tape to keep screws from falling out. Bravo.
Bought one book, now I am going for another.
Thank you Nick. As always, the perfect blend of knowledge, humor, and safety.
Thanks for saying.
When I get my first table saw, I will revisit this! This isn’t the first video of yours I’ve seen. You have a great presentation and reminds me of some great teachers I was blessed to have in school years ago.
Are you certain you were thorough enough? I now understand a little more than I did before. That’s great.
I really appreciate you including metic measurements! Great channel too!
We kinda have to -- only a third of our audience thinks in inches. Thanks for saying.
@@WorkshopCompanion it’s still kind from you and I thank you as well.
What a man! Amazing presentation!
Loved the content, the delivery, and that damn hammer swing. My goodness
Such a pleasant way to spend half an hour, watching these video lessons is awesome, love the wild west hammer at the end lol!
I wish I had you instead of my shop teacher in high school. You explain things better, without condescending, without a better than you attitude. You seem like a fun guy to work with.
Thanks for those kind words.
Terrific content, production quality, and clearly a knowledgeable teacher. Well done 🙏🏽
Thanks for the kind words.
@@WorkshopCompanion I meant them! May I also ask what kind of animation software you used at minute 8:12? I'm an aspiring wood worker. I purchased an investment property with a detached garage built in the 1970's (?). The bones are good but much of the building is in disrepair. I'm going through the process of a stud down rehab to create my own workshop. I'm working through the electrical of the building and wanted to use the same animation to describe the home run diagram and circuitry. Thank you.
@@mehrrepairz For that particular animation, I used Sketchup with an "Animator" plugin. Sympathize on the building -- we restored a 100-year-old hangar for our shop/studio. Everything but the walls, windows, and a few rafters are new.
@@WorkshopCompanion Congratulations for that rework and recycle of an old building, Nick. Good size too. I've scanned the background of several of your videos, and I'm a little envious of you guys for having that much room.
gotta love that hammer spin around the finger too hahahah
I don’t own a table saw or even a shop. But enjoy watching and listening to this excellent teacher. Banking this knowledge for the day I will have a shop😊
The best idea for the sled. Period. Thanks for showing that.
Most welcome.
Sir you are an excellent instructor! I could listen to you talk about tools all day lol.... Nice job my friend!
Thanks for those kind words.
Manufacturers have indeed come up with something that works well for cross cuts. A miter saw.
Love your use of both imperial and metric measurements. By far the best woodworking channel I’ve come across.
Thanks for the kind words.
I have watched literally hundreds of frigging sled vids... not one comes close to your quality and versatility, and bugger me if that adjustable little fractions-of-a-mm screw-thingamajig thingy isn't the best I have seen so far! great video... no... GREAT VIDEO!
Thanks...no, THANKS!
@@WorkshopCompanion 🤔🤔 ... I see your point! Apologies... nothing like an English expression! 😂
Sir, I have now made this sled and it is just the very best sled around... brilliant! All I need now is a table saw!
The only WW I've seen using transfer punches, awesome job! great tutorial. Appreciate you not trying to sell me a bunch of product.
We have a complete metalworking shop for our aircraft builds in the next room, off camera. It's amazing how often we borrow tools from one shop to the other.
This guy is the “Rainman” of woodworking. He throws out knowledge bombs like Raymond counted cards.
Without a doubt the best sled how-to that I've seen. Details, all the little details missing from other videos. Correct names for the fasteners as well as the reasons each was used. On top of all that, metrics as well. Even if you don't live in that part of the world. Excellent work.
Thanks for saying.
I have a couple of your books that I cut years ago, but the humorous asides in your videos are just great. As with your books, the videos are thorough and detailed. Thanks much
Most welcome. And thanks for the kind words.
The KZhead algorithm was kind enough to serve this up to me today. Couldn't ask for more: a project I need to do presented by a master who speaks clearly and with words us mere mortals can understand. Well done Nick!
Thanks. Every now and then, the algorithm works.
I appreciate the time, effort and consideration you put into this channel. 🙏
Congratulations to the presenter for possibly the best planned video I have seen. The substance is easily understood and the credibility is first class.
Thanks for saying
The best way to learn is to teach and this man has obviously been teaching for many years, That and he just made me feel like an idiot for buying a high end miter fence :-). Anyway great video and thank you sir.
Most welcome. And your comment about the best way to learn is spot on. I never learned woodworking so much or so well as when I was teaching it at the University of Cincinnati.
Best sled vid on KZhead! Bravo, Sir! Bravo! It’s rare for me to watch a video then immediately watch it again, but that’s exactly what I’m about to do.
Thanks -- enjoy!
"Easier than gluing your fingers back on" Brilliant 😆😅🤣😂
Masterly overview. The basic problem is the saw itself- the left hand side of the table should slide, completely solving the problem. Available, but rare.
There is also a type of sliding table saw in which the entire carriage slides forward and the work remains stationary on the table. Also rare, maybe rare-er. Shopsmith offered one for a while, but it was too much of an odd duck to catch on. Thanks for the kind words.
This man is an EXCELLENT TEACHER. In another life he must have been a school teacher. I thoroughly enjoyed watching, and learning from, this video. As the late, great, Paul Harvey was fond of saying, LEAD ON, Nick.
Thanks. Actually, I was a teacher in this life. University of Cincinnati.
This is a great tutorial with some of the clearest explanations and best ideas I've seen in a while. Thank you!
Most welcome.
I could desire to see Paris, climb a famous mountain, write a best selling novel... but no. One of my new life goals is to tour this man's workshop.
You would be disappointed. The part you can't see is overgrown with camera equipment, old airplane parts, and the ghosts of projects past.
Another great video! One thing to add to UHMW, it's also "self lubricating" meaning you don't need any lubricants for preventing wear and you also don't need any lubricants in order to decrease friction between the mating surfaces. Also when tapping wood I always pour a good amount of CA into the threads and shoot some accelerator, then run the tap through again to clean up the threads, this will make the threads harder and won't strip so easily
One good piece of information; one exceptionally good tip. Thanks for sharing.
Brilliant. Decades of wisdom packed for posterity. Thank you sir!
I appreciate all the hard work you have put in to make this video. I could only imagine how detailed a woodworker you would be when you made such a detailed video for a sled that people think should be a 3 minute job. Excellent work mate!!
This definitively is the best tablesaw sled and the best explanation I have ever seen on KZhead. And I have seen many. Thank you so much for sharing.
Brilliantly explained
I love your conversions between metric and the other measure. Your "matter of fact" explanations inspire confidence. Thanks!
Most welcome.
Wow. I wish he taught MY high school shop class. I probably would've learned more.
Brilliant video.!!! ...as per usual. Especially the use of the metric system. But !!, *millimeters* rather than centimetres is the best practice.
Occasionally, very occasionally, you'll stumble upon a little nugget of gold sneakily disguised in the form of a KZhead video that makes you say, "Oooooooooh". This is one of these videos. Perfectly executed in every way and will be the first jig that I make (once I pull my finger out) 👍
Thanks for those kind words.
This guy was incredible. I learned more every minute than I did from almost every other video I've watched of "woodworking" KZheadrs. Keep up the good work. And make more videos please
We're trying. Thanks for your kind words.
Nice set up with your on/off swirch!
He is soo good! Makes me wanna start making some jigs, stops & clamps!
Hi Nick, I have just come across Your channel and I have to admit, that You and Stumpy Nubs are my favorite teachers now, followed closely by 3x3 Tamar. People like You have a special gift. Thank You so much for that. kind regards from Germany
Thanks for your kind words.
Watching you teach me about sled build ideas makes me wish I would have been a better student in high school, you remind me of a woodshop shop teacher. Well done sir.
Thanks.
Looks like I just found my new favorite KZhead channel!!
I've been an educator for 35 years ... my God, you're good.
That means a lot. Thanks for saying.
You blow my mind !!! AMAZING! thank you for these great tutorials.
Most welcome.
By and far the most comprehensive and useful sled video I have seen. I am disappointed I finally made the leap to build a sled last week only to find your video this morning…looks like I am making another sled!
This is another awesome resource. I just purchased the plans, well worth it and it supports this great content.
Thanks for saying.
I found your channel less than a month ago and am so happy I did!
@24:22 -- "This scale won't be precise in all circumstances. It may change if you change saw blades." Which is why I built my sleds for the left side of the blade instead of the right. No matter what blade I use, the shoulder on the arbor never changes position, while the width of the blade or dado stack always extends to the right.
love the safety perspex on the sled neat idea just reminds you to keep fingers away
Thanks.
Well thought out and explained, little bit of dry humor to keep it personable (love the rim shot at 17:57). Thanks for posting.
Most welcome.
Actually there are so many good woodworking techniques and tips in only one video. It's amazing. Understandable and clear information. This guy is a true teacher. I also appreciate giving the information both in imperial and metric.
Thanks for the kind words.
This must be the best detailed saw sled video on KZhead. It’s absolutely amazing.
Thanks for saying.
What an excellent video! Miter guide sticks have a way of creeping from the vibrating saw while pressing your work hard against the stick. I simply use a very sharp-pointed 1" screw about 1" from the end of my miter guide stick. I turn the screw until it's poking through the end of the stick only 1/32" or less. It's amazing how it completely stops the guide from slipping. You can just leave the screw in, remember to lift the end of the guide and it won't scratch the plywood.
I presume you talking about what I call a "push stick." Good tip.
@@WorkshopCompanion No, talking about your miter guide fence for cutting 45s. The pivoting miter fence gets slippery and creeps even if you tighten the bolt crushing tight. I use oak for a miter fence, and it's very slippery. Sawdust makes everything slippery after a while.
@@Bob_Adkins Haven't hand that problem -- using ash and Baltic birch plywood.
@@WorkshopCompanion Yeah, it's probably my weak 3/8 plywood, but the wood also gets slippery after lots of use. It's amazing that just a tiny sharp screw tip anchors it so strongly. Thanks!
I'm delighted to have just found your channel. Eloquent, concise information presented with enthusiastic clarity. Even better, no dreadful library music or gimmicks. I'm a relative beginner and look forward to watching all your vids. Thank you very much for making the effort. Cheers from the UK.
Thanks from Ohio.
Just now at the ripe YOUNG age of, um eh, lets just say I am on top of the hill, have started working with wood. DAMN son why could your channel not existed some 20 years ago. lol. Keep up the good work my friend.
What an incredible video. Great job on explaining the process.
Hi, Alex from Costa Rica again. I'm advancing on my cutting table and this whole video is like gold to me. Thank you very much for sharing your time and knowledge with us Sir!
Glad it was helpful.
This person's pretty good reminds me of my old high school shop teacher.
Thanks a lot for imparting such a useful knowledge based on lengthy experience. Lots of love and respect from Pakistan.🇵🇰
A great class, with a great teacher. You keep the attention of your subscribers rivited on the lesson at hand. Couldn't ask for a better instructor
Thanks for saying. But a classroom is a two-way street. I've worked professionally in several communities (including education), and have found that craftsmen and craftswomen are -- by far -- the most eager to learn and share what they've learned. As much as you appreciate my efforts, I'm just as thankful for yours.
Excellent & most Informative. Greetings & Thanks from Ireland.
Brilliant! Shakespeares leanguage... And the purest presentation of the material!!! And of course very warm. 20 score of 10 possible!!!
Thank ye.
@@WorkshopCompanion , put your "ye" in my vocabulary!
Thanks for all the great tips Nick! Sleds are such an asset for a table saw.
Most welcome.
I'm very new to wood working and have found your tutorials both in depth and calming you make it look like this is something I could quite easily achieve (in theory) testament to your skill as a tutor many thanks Tricia.
Thanks for the kind words.
to the point , simple and clear , comprehensive explantions . one the best videos .
Many thanks.
I've had too subscribe, I feel a once in two thousand year event coming on and I need to prepare. Thankyou Sir. A fine explanation of damn near everything...ever. 👍😁
Ok, I have seen a lot of projects on how to build a table saw sled, but THIS TUTORIAL IS THE BEST I HAVE EVER SEEN. And I mean EVER! Brilliant! Thank you so much for sharing this video. I am usually not as emotional about videos but this tutorial is just perfect! And I feel like having to tell you how good it is, otherwise … I don‘t know … my head is going to explode due to all this excitement?!? Have a great day. Greetings from Switzerland 🇨🇭 (…and now I‘m off to build me a new table saw sled…)
Calm down! Out of respect for your health, we'll try to be much more boring in the future...;-)
@@WorkshopCompanion Oh no, please don‘t. Please keep challenging my health the way you did till now. PLEEEASE! 🤪😂 And being all sincere again: This is still the very best table saw sled tutorial ever!
Fantastic build tutorial for a great shop addition. ... also liked how you made proper use of the "blurring" tool near the end!!
You are simply charming and your guidance is always useful! Big fan!!!
Thanks for saying.
Love your videos. Smart, informative and entertaining. I always learn something from your videos.
I'm a couple of months away from setting up a small shop, and I'm definitely buying all of Nick's plans.
Terrific table saw sled build Nick! Great presentation & instruction as usual. Well done! 👍👏😉
Thanks for saying.
Great video, thank you very much. About your auxiliary surface @23:30: Instead of one plate I've made two narrow stripes. The advantages: - you need less material for them - you need less storage space for them And as another benefit: Imagine you want a cutoff from a longer bar. Instead of placing the cutoff on the sled and the longer end of the bar on the right side of the blade (where you must have the space for it) it's more comfortable to place the longer end on the sled where you normally have the space. To do so you set your table fence to the desired extend, push the bar against it, hold it in place on the sled with your left hand (or clamp it), push away the fence with the other hand and then make the cut. But in this case your auxiliary surface may be too wide to set the fence to the desired extend for shorter cutoffs. No problem with the stripes, just use only one of them. 'Pro-Tip': Make the stop-block at the end of the stripe double as wide as the stripe itself. And then make a countersink at the other end of the stripe on the bottom side and glue a flat magnet in. Both the wider block and the magnet will prevent the stripe from sliding or shifting sideways. Works great for me. If you like the idea you make like to upload a short additional video about that?
All good ideas, and thanks for sharing. Our video schedule is set for the foreseeable future, but we'll keep this in mind.
The great norm’ Abram,has been completely out normed by this bloke. This fellow is ridiculously under subbed. Best quality woodworking content on youtube,absolutely outstanding.
I was so impressed with this video I subscribed to your channel. As soon as I can I want to make this sled. It will take me a few weeks, as I have a lot of problems medically as I am taking chemo for primary liver cancer. So, bear with me, as I really like your sled better than any other I have seen.
This is the best sled build I have seen. Thanks so much for sharing.
Most welcome.
Holy cow man you really thought of everything!! This must have taken months to work out! Then perfecting your spiel for each shot! Thank you Nick!
"...must have taken months..." Nah. About fifty years.
About 600 months ;-)
I’ve watched hundreds of “how tos”. This is the best one I’ve ever seen…in every aspect.
Thanks for saying.
Great video! Many thanks for mentioning the measures in millimeters (and inches...)
Most welcome.
I have watched many sled videos on KZhead and built 2 of my own. But your methods beat most others I have seen. I have a large capacity sled which is really heavy to manhandle especially with the arthritis in my fingers, so I will make your adjustable "half" sled next and make it smaller so it will be easier for me to cope with. Many thanks for sharing your approach. Excellent video!
You're most welcome, and thanks for sharing.
Like a patient teacher, beautiful presentation. Thank you so much!
You're welcome so much.