HORIZONTAL HYDRAULIC PRESS BRAKE NARGESA PP200

The versatility of the 20 Tons Horizontal Press Brake NARGESA PP200 allows us to bend, fold, cut and shape in cold, stretch and reduce, inlay, notch and assemble...
The versatility of the best Horizontal Hydraulic Press Machine NARGESA PP200 makes it possible for us to make a great deal of forging parts and all kinds of operations in all kinds of materials: pipe, flat bar, several profiles, rods... Folding operations with wrought iron machines permit to completely bend the parts or pieces unlike conventional flat bar section bending machines. Pipe bending at fixed radius up to 180º could be considered one of the other good features of these presses. Stretching and reducing pipes on the ends in order to make parts that fit or weld later. Cutting, piercing and punching flat bars or metal sheets turn this horizontal bending press into a punching shears machine. Many workshops use these presses to stretch and form different kinds of profiles. It is also a solution to bend different profiles at different radius and keeping the ends straight, like when manufacturing handles and flanges. Pipe notching to assemble to another one at 90º. Cold forge uses horizontal presses to make and form different shapes of balosters... Its versatility and its easy handling make this machine a necessary horizontal bending machine for metal working processes.
Horizontal Bending Press Brake PP200 has been manufactured in a 60mm thick welded steel monoblock, stabilized and mechanized. Its robustness, versatility and easy handling are just three of the best features our hydraulic horizontal bending machine has.
ADVANTAGES
Easy handlingt: The machine is sent completely assembled, it is only necessary to connect it to the required power supply and start perfoming.
Versatility: Nargesa PP200 has a catalog with a great deal of optional tooling.
Easy fabrication of tooling: The customer himself or any toolmaker can manufacture dies and punches.
Folding operation with no risk of damaging the punches and dies with thick materials unlike conventional press brakes.
Folding flat bars and sheets into completely close shapes. Conception of this horizontal bending press brake allows to make folding operations impossible to be carried out on a conventional press brake.
Fast tool change, punches and dies: This change does not take more than 30 seconds most of the times.
STANDARD TOOLING: Horizontal press brake PP200 includes the complete 4V’s folding die. (See bottom of the page in standard accesssories)
Technical Caracteristics of the Horizontal Hydraulic Press Machine
Working strength: 20.000 Kg (200 KN)
Working speed: 10 mm/s
Return speed: 35 mm/s
Maximum displacement: 250 mm
Repetitivity: 0,05 mm
Bench size: 600x1170 mm
Working height: 950 mm
Programming mode: Manual or Automatic.
Safety Double acting hold pedal.
Mechanically Guided Piston.
Piece counter.
Pressure regulator.
Engine power: 2.2 KW/3 HP a 1400 r.p.m.
Electric Tension: 230/400 V three-phased
Intensity: 9/5 A
Hydraulic pressure: 50 a 215 Kg/cm2
Hydraulic pump: 7,5 litres/minute
Tank Capacity: 27 litres
Dies support shelf included.
Machine dimensions: 760x1174x1150 mm
Weight: 625 Kg
+INFO
www.nargesa.com/en/industrial-...
Prada Nargesa S.L.
Manufacture and sale of industrial machinery
nargesa@nargesa.com
Tel. (+34) 972568085
www.nargesa.com