How to video on removing and installing a tire onto the rim.
Пікірлер
This guy is a natural teacher. Great job! Very informative!
@45AMT5 ай бұрын
I really appreciate this video, so clear and easy to understand thank you. I needed to revise this for my auto class test tommorow.
@W_aidann4 ай бұрын
I really appreciate your videos more than you can imagine. I taught auto shop in the early 80's for a short time and barely touched a car since. Now, I am subbing in an auto shop with much of the same equipment. I use youtube as a classroom aid and to educate myself as well. This weekend I need to educate myself on a hunter alignement rack. THANKS!
@DWMtukwila8 жыл бұрын
This helped me tremendously I just got a job at speeds auto shop and a vid like this was recommended now I have a general idea of how it works thanks alot.
@jacobreynolds80283 жыл бұрын
🕘 own jj
@user-gz7iy8hk4o Жыл бұрын
Really appreciate the help 10/10 stars for you
@user-iy5qv7rs3o10 ай бұрын
Excellent video, very informative.
@joshhemminger25645 жыл бұрын
Great explanation and demonstration
@BROTHAWARRIOR8 жыл бұрын
Thanks, very explanatory.
@SHIVA18945 жыл бұрын
You forgot to adjust the duck head to rim clearance. The lock level auto adjusts the height clearance but you need to turn the arm adjusting screw knob ( The knob next to the air gauge) to set the 1/8 to 1/4 side clearance so the duck head does not contact the rim.
@bobcat15 жыл бұрын
You are correct I did forget to illustrate that part. Good point and thank you for bringing it up.
@jbtiberi22375 жыл бұрын
Easy to use and effective
@guillaumekircher182 жыл бұрын
Coats table top inflation system suck when it come to inflating tires. I have a Coats tire changer and I add the OTC 5700A inflation system and love it!!! You never have to pick up the tire to inflate the tire like you do with a table top inflation system
@michaelwhite27507 жыл бұрын
now a lesson on wheels with sensors! good VIDEO!
@anthonynguyen82927 жыл бұрын
Very helpfull, can u also post some videos on wheel balencing and allignment. Could be more helpfull
@bharathim56044 жыл бұрын
Thanks for the great lesson , ..question you said you use the clamps on the inside of the rim , cause it's a steel rim? It is not used on any other material rim ? For that you use the clamps ? Thanks
@CHIBA280CRV7 жыл бұрын
It’s best if you have custom rims to clan them from the outside
@cantfw22023 жыл бұрын
Very very use full this video❤
@VickyVicky-un4lm10 ай бұрын
Thanks! I should pass my test tomorrow
@samanderson37525 жыл бұрын
There are schools for this??
@cantfw22023 жыл бұрын
Am I right by saying steel rims=inside rim clamp and alumiumn rims outside rim clamp?
@TheWorkBench7 ай бұрын
I still prefer my FMC 7600 Tire Changer , But these are good machine’s as well .
@outdoorhobbiesfarmmachiner5218 Жыл бұрын
Nice Video..
@davidhoover88772 жыл бұрын
Good video
@niralimujpara84493 жыл бұрын
You should show everyone how to mount a 35" tire and using the bead blaster.
@bertmollar5 жыл бұрын
are you from illinois
@cesarcarrillo2705 жыл бұрын
Watch out for stock Ford rims they tend to use wrap around sensors that are directly across from the valve stem. (Newer fords)
@KilljoyGuitar5 жыл бұрын
Support 💙
@thaithaichannel1448 Жыл бұрын
Question do you have a used tire machine for sale?if you do I’m interested to buy one
@raymundoberrios97266 ай бұрын
The pedal shows on the diagram, lift the pedal up to move the clamps out, push the pedal down to move the clamps in.
@wiley07143 жыл бұрын
Assalamu Alaikum how are you brother brother I am also a mechanic like you I work in tire shop like you I have last seven years of experience can you tell me which mechanic is needed in your shop I am a Bangladeshi citizen I am 20 years old my name is Mohammad Arif Hossain
This guy is a natural teacher. Great job! Very informative!
I really appreciate this video, so clear and easy to understand thank you. I needed to revise this for my auto class test tommorow.
I really appreciate your videos more than you can imagine. I taught auto shop in the early 80's for a short time and barely touched a car since. Now, I am subbing in an auto shop with much of the same equipment. I use youtube as a classroom aid and to educate myself as well. This weekend I need to educate myself on a hunter alignement rack. THANKS!
This helped me tremendously I just got a job at speeds auto shop and a vid like this was recommended now I have a general idea of how it works thanks alot.
🕘 own jj
Really appreciate the help 10/10 stars for you
Excellent video, very informative.
Great explanation and demonstration
Thanks, very explanatory.
You forgot to adjust the duck head to rim clearance. The lock level auto adjusts the height clearance but you need to turn the arm adjusting screw knob ( The knob next to the air gauge) to set the 1/8 to 1/4 side clearance so the duck head does not contact the rim.
You are correct I did forget to illustrate that part. Good point and thank you for bringing it up.
Easy to use and effective
Coats table top inflation system suck when it come to inflating tires. I have a Coats tire changer and I add the OTC 5700A inflation system and love it!!! You never have to pick up the tire to inflate the tire like you do with a table top inflation system
now a lesson on wheels with sensors! good VIDEO!
Very helpfull, can u also post some videos on wheel balencing and allignment. Could be more helpfull
Thanks for the great lesson , ..question you said you use the clamps on the inside of the rim , cause it's a steel rim? It is not used on any other material rim ? For that you use the clamps ? Thanks
It’s best if you have custom rims to clan them from the outside
Very very use full this video❤
Thanks! I should pass my test tomorrow
There are schools for this??
Am I right by saying steel rims=inside rim clamp and alumiumn rims outside rim clamp?
I still prefer my FMC 7600 Tire Changer , But these are good machine’s as well .
Nice Video..
Good video
You should show everyone how to mount a 35" tire and using the bead blaster.
are you from illinois
Watch out for stock Ford rims they tend to use wrap around sensors that are directly across from the valve stem. (Newer fords)
Support 💙
Question do you have a used tire machine for sale?if you do I’m interested to buy one
The pedal shows on the diagram, lift the pedal up to move the clamps out, push the pedal down to move the clamps in.
Assalamu Alaikum how are you brother brother I am also a mechanic like you I work in tire shop like you I have last seven years of experience can you tell me which mechanic is needed in your shop I am a Bangladeshi citizen I am 20 years old my name is Mohammad Arif Hossain
so good
GOOD INSTRUCTIONAL
nice thanks