Impressive! I love you didn't quit and your modification worked!! For people seeking an inexpensive sand blaster, this video shows how the mod is done. Once again, Friends, Live and learn! Thanks, Anatollii!
@jefbretschneider16073 жыл бұрын
Outstanding modification! I REALLY appreciate you going through he steps AND bit sizes. Good job!! Going to buy one tomorrow.
@gcong24 жыл бұрын
Dude, you just saved me so much sanding. Tryed the gun yesterday, didnt work. Been procrastinating sanding the molding on 10 oak doors for my friend, your a life savour man !
@colm7837 Жыл бұрын
I have the same tool. On page 8 of the instruction manual, under General Operating Instructions, it says "WARNING. Do not use sand for blasting." Further down, it states that compressor pressure should not exceed 90 psi. I had no problems, after reading the manual. That's what it's for.
@johnasumaa86442 жыл бұрын
Not sure which manual you're looking at, but that's not what it says. The warning is specifically regarding using sand with silica, and it's NOT that the unit can't use sand, the warning is specifically about breathing silicosis and aluminum oxide.
@5thGenNativeTexanАй бұрын
Awesome video. Thanks for taking the risk on the modification of your new tool and for sharing with us!
@thomaslcrawford3 жыл бұрын
Good job dude. You got that thing working great !!!!
@poolbob87763 жыл бұрын
Nice details, I have an old one that I never use because it never worked well. Going to work on that. Very handy to not have to pull out the big blaster for small jobs.
@ronburns68653 жыл бұрын
I just bought the same unit, and out of the box it failed to work, thank you for showing how to modify, good job
@mikepeel11213 жыл бұрын
Thank you for the review friend! Very helpful on my end!
@brocktillman10148 ай бұрын
Found me a new tool to have for my shop. The mods worked great. Thanks for sharing
@vicjames27435 ай бұрын
Great to hear!
@tolikgord4 ай бұрын
You saved my weekend project(my problem) thanks for the share
@bmodllc3 жыл бұрын
I just brought one of those guns and same thing out the box it did not work so thank you very much for making this video it helps alot cause I was about to take it back to the store
@jessemitchell80122 жыл бұрын
I found that making sure sand is dry without moisture and i also siffted the sand makes it work great !
@danamcintyre35658 ай бұрын
Excellent video I'm going to buy the gun today , thanks for the info
@scottryan98454 жыл бұрын
Thanks bro. Just what I need for my bicycle projects
@wer6shaffers3 жыл бұрын
👍 will do this before using the one I bought. Thank you for making this.
@machineman6498 Жыл бұрын
Holy Cow! Some hobbies should not be tried without researching the danger or hazards! When I saw you hold the metal with a bare hand and I was already concerned when you stated going to home depot for a bag of sand... If you accidentally pass that over your bare hand it can take off flesh. Sand is risky, even with a dust filter, when you take it off the dangerous dust is lingering in the air. Yes some sands are safer than others but why mess around, get some blast media.
@rob124492 жыл бұрын
Justt bought one yesterday. I'm gonna make the modification before I even use it . Thank you, sir.
@gottabighit13 жыл бұрын
How did it go?
@23steph133 жыл бұрын
@@23steph13 I’d like to say it went well, and I did get it done. Works incredibly well. Just took about 8 times the length of this video. LOL But worth the effort.
@gottabighit13 жыл бұрын
Soda didn’t didn’t do anything to the powder coating I was trying to remove. Thank you so much for the help. Sand (dry sand) worked like a charm.
@ELSKEETO2 жыл бұрын
What kind of sand can you use once you make this modification?
@brianbutterworth81862 жыл бұрын
@@brianbutterworth8186 Play sand from Home Depot.
@ELSKEETO2 жыл бұрын
thanks Anatoli. Mine worked out of the box but not as good as i wanted. Im gonna mod it like you showed.
@RedlandsBuzz Жыл бұрын
Thanks for this mod video and sizing on bits/holes. I know this is 2 1/2 years old, but for folks that are coming here later, it does indeed say not to use sand. However, I found a decent work around to get consistent media size from Home Depot sandbox sand. I first put the sand out on a tarp to dry in the sun - Then use a mesh strainer you can get from Walmart/Target and filter into a milk jug/soda bottle through a funnel. It takes out the largest pebbles and gives a generally consistent media without clogging.
@StiNbJu2 жыл бұрын
you should use crushed glass instead of sand because sand is bad for your health some countries have band the use of it
@TotoGuy-Original Жыл бұрын
@@TotoGuy-Original stay off the sand beaches on a windy day right
@coldspring624 Жыл бұрын
@@coldspring624 You don't blast the beach sand at high velocity on metal plates while breathing the dust though. The NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
@rolfbjorn9937 Жыл бұрын
Great review. Thank you very much!
@vladorlovsky66234 жыл бұрын
Wow , I have the same gun with the same problem, I'll be doing what you have done , first thing in the morning, thanks
@stevedawson2563 жыл бұрын
Thanks man! Great share! God bless you brother!
@steelvet313322 күн бұрын
You have a 50/50 chance with this sand blaster, I did the modifications and it works great now but the guy next door to me, his worked right out of the box. I am also glad you remind everyone to wear goggles and gloves are a good idea as well, Thank you.
@wadedblade3 жыл бұрын
What media do you use
@PeterFeltersnatch8523 жыл бұрын
I've heard a lot that a respirator or mask is very important. Guessing it makes paint dust or something.
@nateb45432 жыл бұрын
@@nateb4543 Not just the paint dust. The very sand itself that is being used for blasting here contains silica and you can end up with silicosis which is no joke.
@Hereford1642 Жыл бұрын
@@Hereford1642 ya since this comment i strained sand i had for blasting, there was a bunch of dust and looked it up. Now i wear a reapirator
@nateb4543 Жыл бұрын
@@nateb4543 My work here is done.
@Hereford1642 Жыл бұрын
Thank you very much for the demo on the mod. very helpfull
@erictownsend87113 жыл бұрын
how many psi you use
@gilnicolas63773 жыл бұрын
It does work out of the box if you use the proper media. Home Depot sand is made for a child's sandbox. It does not have a consistent grit size. I've used glass bead & aluminum oxide with great success. Moisture will clump the media and clog the gun, you need a water separator right at the gun.
@richardberger4143 жыл бұрын
What grit sand do you need to use ?
@hunterwingler5432 жыл бұрын
@@hunterwingler543 I got decent results with 100/170 glass bead
@richardberger4142 жыл бұрын
Man you are a true blue Harbor Freight customer. Harbor freight sandblaster. Harbor freight cordless drill and those dangerous gold drill bitts that snap in a heartbeat . I drilled a piece once like you did. Held the piece to be drilled in one hand while drilling with the other. The bit snapped and I drilled right through my thumb with the broken bit that was left in the drill. What a bloody mess . I NEVER buy drill bits from Harbor Freight anymore.
@TheNYgolfer3 жыл бұрын
Thanks man, this is the same problem I am having with mine.
@punisher60012 жыл бұрын
Nice job looks like it works much better
@waynedaudelin61192 жыл бұрын
Nice mods, impressive, thanks for sharing 👍😃
@clifficus2 жыл бұрын
I followed this recommendations and the blasting improved a lot, but still was not good for the task at hand. I was trying to remove old paint from a porch light and it failed miserably. My compressor does not hold 90 psi for more than a second or two, it drops to 60 very quickly, so that might be my problem and not the improved modified gun. Thank you.
@vandresv2 жыл бұрын
This is awesome! Great work! Also putting that little black car clip in that top hole is fucking genius lmfao. Thank you!
@floppybeefcurtains76793 жыл бұрын
Awesome modification thank you for sharing. 🤗🎸🌏FNZealand
@macpakinga1271 Жыл бұрын
How many horsepower and scfm are you running from the compressor?? Thanks David
@bennyhill12002 жыл бұрын
Going to give this a try!!
@BamaDanKnives3 жыл бұрын
Just picked up one of these today along with a used 5.5 hp compressor for $70.00. Hooked everything up and loaded the gun with glass heads. I’m going to etch glass. Cut a stencil on my Cricut, stuck it on a glass I wanted to test on and it was fantastic. I live in SW Florida so humidity is a way of life here. Installed a desiccant moisture absorber in line and went to town. I am throughly empresses with thing. It does a great job.
@wildmanjac12 жыл бұрын
I found sacks of black grit at Menards. I think it was eleven bucks or so. It works great but you are constantly refilling the hopper. I tried baking soda today. I dont think it's as aggressive but it lasted a lot longer. I bought sand and it didnt go through, im sure glad it didnt, the comments said I would have Silicosis right now. I have a respirator so i might get a second gun to modify.
@danbrownellfuzzy30107 ай бұрын
I bought same model as you and have the same issue...gonna try those modifications, thanks
@PlayerLeonardo2 жыл бұрын
Nice job. Just bought one and will make the mod.
@NWPencrawler2 жыл бұрын
Well done brother. Thanks for sharing your advice with us !
@joh3313 жыл бұрын
How much blasting media do you use with these modifications in place?
@hmroa30564 жыл бұрын
NOT supposed to be using sand through this gun. Says right on it not to use sand. Glass beads worked great through mine. No issues. Haven’t tried baking soda but should work too. All this extra work was unnecessary
@bshend2 жыл бұрын
Great video!
@BenRivered Жыл бұрын
dumb question. when he drills out the gun he said all the way to? or through? the bottom? not through and through right?
@mariebourn8317 Жыл бұрын
I gotta strip the paint off some old steel wheels for a repaint. Liquid strippers barely phase it. A 2400psi pressure washer with the needle tip does not phase it. Think this would do anything?
@jwandhistools3 жыл бұрын
oh it does work you just need to get proper blasting media sand from home depot is not good most likely too much moisture , works great with soda
@mac2k20203 жыл бұрын
Thanks for this video... I have this Air Gun too... Ans this problem too.... Now i know what i must making. Thanks
@andredetailinggardengarage28011 ай бұрын
Good job!
@afroomega773 жыл бұрын
whats the compressor psi you are using buddy?
@msi42262 жыл бұрын
gr8 video cheers
@grahambate33843 жыл бұрын
The "O" ring took you right back to a small opening.
@wayawolf19674 ай бұрын
The most important factor in any media blasting is having the proper media. Home Depot sand is not made for sandblasting. It has tiny rocks, pebbles, and debris in the bag. You need either sand made for sandblasting, or you can filter your own sand through a screen to remove the larger particles that are clogging the valve and the tip on the gun.
@steadyeddie745311 ай бұрын
You're just talking about the fancy sandbox sand that you can get at HD.
@ProleDaddy4 ай бұрын
Fi like the mod, but wonder if it would stil work if blasting with SODA? Or is it only used, no, with sand like media? Thank you.
@rottiejakeluke Жыл бұрын
NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
@rolfbjorn9937 Жыл бұрын
Did you use actual sand? Or abrasive made for a sandblaster
@nateb45432 жыл бұрын
Brilliant mod.... Gonna tear mine apart now.
@AXNJXN14 ай бұрын
excellent pistolet !!
@MultiBegbeg3 жыл бұрын
excellent - nice job! thanks
@martybrooks55934 жыл бұрын
Thanks
@tolikgord4 жыл бұрын
Thanks for the information.
@marshallguerra1353 Жыл бұрын
what size of sand did you grab at home depot
@elpulpas4 жыл бұрын
Exelente amigo ,saludos desde chile
@josesepulveda94252 жыл бұрын
How big was your compressor. Maybe that was the problem, plus moiture. But well done. A+
@mattblack93443 жыл бұрын
Great video
@chaz3535353 жыл бұрын
very helpful, thanks
@pianobar78012 жыл бұрын
Definitely tried to run to thick of a media and a water/air filter would help as well but still good video man
@4npushap3524 жыл бұрын
I had the same problem. Unfortunately, I didn’t see this video until I returned mine to the store.
@joewalker16543 жыл бұрын
Do you think this device would work on raptor paint with sand??
@millin222211 ай бұрын
What type of metal did you blast in the video?
@igotakai56442 жыл бұрын
What size is the connector you use ?
@carlosfrances01 Жыл бұрын
I think it works much better than the other bigger ones, right?
@betocastaneda15973 жыл бұрын
What’s the power of your air compressor thanks.
@rubenmorales9891 Жыл бұрын
Nice Bro!
@kennethgray3794 Жыл бұрын
Nice mod! :) Any chance to share your compressor specs? FAD / Actually Delivered l/min
@marquezvanroeschen53403 жыл бұрын
Definately working now
@anthonys51704 жыл бұрын
I'm looking for a blaster to strip varnish off some old wooden chairs. Every video I've watched on KZhead, including your video, doesn't say anything about PSI, guns, tips, or medium to use. The people in the videos just start blasting. I want to buy a blaster and everything I need to blast wood. Can y'all enlighten me about what I need?
@cmmaine1007 ай бұрын
What sand are you putting in there?
@2000jago6 күн бұрын
Can you use soda with it?
@jeremywatts27684 жыл бұрын
Thanks for the link to product 😅 good review but how can I find this particular blaster?
@ainzooalgown64502 жыл бұрын
Nice mod. I might revisit mine ($0) vs buying a new sandblaster. I just have a small job to do
@randyhigginbotham961 Жыл бұрын
Do it only work on aluminum
@keronackles83272 жыл бұрын
you can use river sand if you dry it out first i use a metal bucket on a propane burner to dry the sand quick and easy damp sand will clog any sand blaster
@frankdavidson96753 жыл бұрын
Can I use a car tire air compressor to power a sand blaster?
@dawnhay57572 ай бұрын
Do you actually use it on camera other wise
@ronnyfountain75663 жыл бұрын
When blasting with sand use at least a dust mask as silica dust is very hazardous to inhale.
@SteveMirabelli3 жыл бұрын
"silica dust is very hazardous to inhale." silica dust is really bad, it lingers in their air and doesn't settle, then becomes airborn. most states have banned it's use. it's worth the spend to go to a tool shop and buy the proper sandblasting media, plus get advice on the right material to use for your job.
@LatinDanceVideos2 жыл бұрын
@@LatinDanceVideos Blasting media is quite expensive especially if you don’t have a way to recover and recycle it I don’t agree with banning the use of silica sand just saying it’s dangerous or hazardous isn’t the best warning either they should put the definition of silicosis then people could make an educated decision to use a respirator or not
@Ezekiel-OffRoad2 жыл бұрын
@@Ezekiel-OffRoad Yup... lungs are more expendable. This video is dangerous, the sand is illegal in the US.
@ronhancock46072 жыл бұрын
good job, sir
@aldalbertomarchena96254 жыл бұрын
Thanks
@tolikgord4 жыл бұрын
Thanks for the video, I did the modification on mine but it still didn't work properly. Can you please tell me what size air compressor you used? I have a Dewalt 16 gallon compressor, I used play sand and also tried black diamond media. Could the compressor size be the issue? Thanks
@jrorellana48653 жыл бұрын
The capacity of the compressor only influences the possible duration of sandblasting. The grain size of the medium may be too coarse.
@ichhier51652 жыл бұрын
Анатолий, здравствуйте. Спасибо за видео, собираюсь обзавестись таким же или подобным. Как вообще впечатления от аппарата после доработки? Можете рекомендовать ?)
@alexandrpavlov44743 жыл бұрын
Exelente yo compré una pero salío defectuosa de la entrada de aire estaba quebrada. Saludos
@faustinomartinez7073 жыл бұрын
Thank you. I almost dumped the damn thing.
@ichhier51652 жыл бұрын
Spasibo! Dosvdanya хорошо! спасибо!
@amramhakohen74743 жыл бұрын
Like a day at the beach
@cellinitv27564 жыл бұрын
your voice sounds similar to sylverster stallone :)
@alexandrufloricica14353 жыл бұрын
Great !
@davidzornes6863 Жыл бұрын
how many psi are you using?
@KurtBarcelona2 жыл бұрын
What send u using
@ivannazar81463 жыл бұрын
Ok I’m intrigued and totally gonna try it. What size air compressor are you using please? Thanks for sharing!
@coloredcaboosecreations2 жыл бұрын
The bigger the better. They recomended 90psi pressure and with small air compressor you will be waiting more then blasting.
@tolikgord2 жыл бұрын
thanks
@thymekiller3 жыл бұрын
ah crap! just bought. didn't work either. time for mod. thanks! I was using walnut shell, probably much bigger than soda or glass bead.
@keithnegron22872 жыл бұрын
Have the same gun don't work thanks will try this thumbs up.thanks again 👍😀👌😊🙂
Impressive! I love you didn't quit and your modification worked!! For people seeking an inexpensive sand blaster, this video shows how the mod is done. Once again, Friends, Live and learn! Thanks, Anatollii!
Outstanding modification! I REALLY appreciate you going through he steps AND bit sizes. Good job!! Going to buy one tomorrow.
Dude, you just saved me so much sanding. Tryed the gun yesterday, didnt work. Been procrastinating sanding the molding on 10 oak doors for my friend, your a life savour man !
I have the same tool. On page 8 of the instruction manual, under General Operating Instructions, it says "WARNING. Do not use sand for blasting." Further down, it states that compressor pressure should not exceed 90 psi. I had no problems, after reading the manual. That's what it's for.
Not sure which manual you're looking at, but that's not what it says. The warning is specifically regarding using sand with silica, and it's NOT that the unit can't use sand, the warning is specifically about breathing silicosis and aluminum oxide.
Awesome video. Thanks for taking the risk on the modification of your new tool and for sharing with us!
Good job dude. You got that thing working great !!!!
Nice details, I have an old one that I never use because it never worked well. Going to work on that. Very handy to not have to pull out the big blaster for small jobs.
I just bought the same unit, and out of the box it failed to work, thank you for showing how to modify, good job
Thank you for the review friend! Very helpful on my end!
Found me a new tool to have for my shop. The mods worked great. Thanks for sharing
Great to hear!
You saved my weekend project(my problem) thanks for the share
I just brought one of those guns and same thing out the box it did not work so thank you very much for making this video it helps alot cause I was about to take it back to the store
I found that making sure sand is dry without moisture and i also siffted the sand makes it work great !
Excellent video I'm going to buy the gun today , thanks for the info
Thanks bro. Just what I need for my bicycle projects
👍 will do this before using the one I bought. Thank you for making this.
Holy Cow! Some hobbies should not be tried without researching the danger or hazards! When I saw you hold the metal with a bare hand and I was already concerned when you stated going to home depot for a bag of sand... If you accidentally pass that over your bare hand it can take off flesh. Sand is risky, even with a dust filter, when you take it off the dangerous dust is lingering in the air. Yes some sands are safer than others but why mess around, get some blast media.
Justt bought one yesterday. I'm gonna make the modification before I even use it . Thank you, sir.
How did it go?
@@23steph13 I’d like to say it went well, and I did get it done. Works incredibly well. Just took about 8 times the length of this video. LOL But worth the effort.
Soda didn’t didn’t do anything to the powder coating I was trying to remove. Thank you so much for the help. Sand (dry sand) worked like a charm.
What kind of sand can you use once you make this modification?
@@brianbutterworth8186 Play sand from Home Depot.
thanks Anatoli. Mine worked out of the box but not as good as i wanted. Im gonna mod it like you showed.
Thanks for this mod video and sizing on bits/holes. I know this is 2 1/2 years old, but for folks that are coming here later, it does indeed say not to use sand. However, I found a decent work around to get consistent media size from Home Depot sandbox sand. I first put the sand out on a tarp to dry in the sun - Then use a mesh strainer you can get from Walmart/Target and filter into a milk jug/soda bottle through a funnel. It takes out the largest pebbles and gives a generally consistent media without clogging.
you should use crushed glass instead of sand because sand is bad for your health some countries have band the use of it
@@TotoGuy-Original stay off the sand beaches on a windy day right
@@coldspring624 You don't blast the beach sand at high velocity on metal plates while breathing the dust though. The NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
Great review. Thank you very much!
Wow , I have the same gun with the same problem, I'll be doing what you have done , first thing in the morning, thanks
Thanks man! Great share! God bless you brother!
You have a 50/50 chance with this sand blaster, I did the modifications and it works great now but the guy next door to me, his worked right out of the box. I am also glad you remind everyone to wear goggles and gloves are a good idea as well, Thank you.
What media do you use
I've heard a lot that a respirator or mask is very important. Guessing it makes paint dust or something.
@@nateb4543 Not just the paint dust. The very sand itself that is being used for blasting here contains silica and you can end up with silicosis which is no joke.
@@Hereford1642 ya since this comment i strained sand i had for blasting, there was a bunch of dust and looked it up. Now i wear a reapirator
@@nateb4543 My work here is done.
Thank you very much for the demo on the mod. very helpfull
how many psi you use
It does work out of the box if you use the proper media. Home Depot sand is made for a child's sandbox. It does not have a consistent grit size. I've used glass bead & aluminum oxide with great success. Moisture will clump the media and clog the gun, you need a water separator right at the gun.
What grit sand do you need to use ?
@@hunterwingler543 I got decent results with 100/170 glass bead
Man you are a true blue Harbor Freight customer. Harbor freight sandblaster. Harbor freight cordless drill and those dangerous gold drill bitts that snap in a heartbeat . I drilled a piece once like you did. Held the piece to be drilled in one hand while drilling with the other. The bit snapped and I drilled right through my thumb with the broken bit that was left in the drill. What a bloody mess . I NEVER buy drill bits from Harbor Freight anymore.
Thanks man, this is the same problem I am having with mine.
Nice job looks like it works much better
Nice mods, impressive, thanks for sharing 👍😃
I followed this recommendations and the blasting improved a lot, but still was not good for the task at hand. I was trying to remove old paint from a porch light and it failed miserably. My compressor does not hold 90 psi for more than a second or two, it drops to 60 very quickly, so that might be my problem and not the improved modified gun. Thank you.
This is awesome! Great work! Also putting that little black car clip in that top hole is fucking genius lmfao. Thank you!
Awesome modification thank you for sharing. 🤗🎸🌏FNZealand
How many horsepower and scfm are you running from the compressor?? Thanks David
Going to give this a try!!
Just picked up one of these today along with a used 5.5 hp compressor for $70.00. Hooked everything up and loaded the gun with glass heads. I’m going to etch glass. Cut a stencil on my Cricut, stuck it on a glass I wanted to test on and it was fantastic. I live in SW Florida so humidity is a way of life here. Installed a desiccant moisture absorber in line and went to town. I am throughly empresses with thing. It does a great job.
I found sacks of black grit at Menards. I think it was eleven bucks or so. It works great but you are constantly refilling the hopper. I tried baking soda today. I dont think it's as aggressive but it lasted a lot longer. I bought sand and it didnt go through, im sure glad it didnt, the comments said I would have Silicosis right now. I have a respirator so i might get a second gun to modify.
I bought same model as you and have the same issue...gonna try those modifications, thanks
Nice job. Just bought one and will make the mod.
Well done brother. Thanks for sharing your advice with us !
How much blasting media do you use with these modifications in place?
NOT supposed to be using sand through this gun. Says right on it not to use sand. Glass beads worked great through mine. No issues. Haven’t tried baking soda but should work too. All this extra work was unnecessary
Great video!
dumb question. when he drills out the gun he said all the way to? or through? the bottom? not through and through right?
I gotta strip the paint off some old steel wheels for a repaint. Liquid strippers barely phase it. A 2400psi pressure washer with the needle tip does not phase it. Think this would do anything?
oh it does work you just need to get proper blasting media sand from home depot is not good most likely too much moisture , works great with soda
Thanks for this video... I have this Air Gun too... Ans this problem too.... Now i know what i must making. Thanks
Good job!
whats the compressor psi you are using buddy?
gr8 video cheers
The "O" ring took you right back to a small opening.
The most important factor in any media blasting is having the proper media. Home Depot sand is not made for sandblasting. It has tiny rocks, pebbles, and debris in the bag. You need either sand made for sandblasting, or you can filter your own sand through a screen to remove the larger particles that are clogging the valve and the tip on the gun.
You're just talking about the fancy sandbox sand that you can get at HD.
Fi like the mod, but wonder if it would stil work if blasting with SODA? Or is it only used, no, with sand like media? Thank you.
NO SAND warning is because of silicosis, a lung disease that's nasty and occurs quite fast when exposed to significant amounts of silica (sand, concrete, plaster and other dusts, even glass) either over time or in acute exposure.
Did you use actual sand? Or abrasive made for a sandblaster
Brilliant mod.... Gonna tear mine apart now.
excellent pistolet !!
excellent - nice job! thanks
Thanks
Thanks for the information.
what size of sand did you grab at home depot
Exelente amigo ,saludos desde chile
How big was your compressor. Maybe that was the problem, plus moiture. But well done. A+
Great video
very helpful, thanks
Definitely tried to run to thick of a media and a water/air filter would help as well but still good video man
I had the same problem. Unfortunately, I didn’t see this video until I returned mine to the store.
Do you think this device would work on raptor paint with sand??
What type of metal did you blast in the video?
What size is the connector you use ?
I think it works much better than the other bigger ones, right?
What’s the power of your air compressor thanks.
Nice Bro!
Nice mod! :) Any chance to share your compressor specs? FAD / Actually Delivered l/min
Definately working now
I'm looking for a blaster to strip varnish off some old wooden chairs. Every video I've watched on KZhead, including your video, doesn't say anything about PSI, guns, tips, or medium to use. The people in the videos just start blasting. I want to buy a blaster and everything I need to blast wood. Can y'all enlighten me about what I need?
What sand are you putting in there?
Can you use soda with it?
Thanks for the link to product 😅 good review but how can I find this particular blaster?
Nice mod. I might revisit mine ($0) vs buying a new sandblaster. I just have a small job to do
Do it only work on aluminum
you can use river sand if you dry it out first i use a metal bucket on a propane burner to dry the sand quick and easy damp sand will clog any sand blaster
Can I use a car tire air compressor to power a sand blaster?
Do you actually use it on camera other wise
When blasting with sand use at least a dust mask as silica dust is very hazardous to inhale.
"silica dust is very hazardous to inhale." silica dust is really bad, it lingers in their air and doesn't settle, then becomes airborn. most states have banned it's use. it's worth the spend to go to a tool shop and buy the proper sandblasting media, plus get advice on the right material to use for your job.
@@LatinDanceVideos Blasting media is quite expensive especially if you don’t have a way to recover and recycle it I don’t agree with banning the use of silica sand just saying it’s dangerous or hazardous isn’t the best warning either they should put the definition of silicosis then people could make an educated decision to use a respirator or not
@@Ezekiel-OffRoad Yup... lungs are more expendable. This video is dangerous, the sand is illegal in the US.
good job, sir
Thanks
Thanks for the video, I did the modification on mine but it still didn't work properly. Can you please tell me what size air compressor you used? I have a Dewalt 16 gallon compressor, I used play sand and also tried black diamond media. Could the compressor size be the issue? Thanks
The capacity of the compressor only influences the possible duration of sandblasting. The grain size of the medium may be too coarse.
Анатолий, здравствуйте. Спасибо за видео, собираюсь обзавестись таким же или подобным. Как вообще впечатления от аппарата после доработки? Можете рекомендовать ?)
Exelente yo compré una pero salío defectuosa de la entrada de aire estaba quebrada. Saludos
Thank you. I almost dumped the damn thing.
Spasibo! Dosvdanya хорошо! спасибо!
Like a day at the beach
your voice sounds similar to sylverster stallone :)
Great !
how many psi are you using?
What send u using
Ok I’m intrigued and totally gonna try it. What size air compressor are you using please? Thanks for sharing!
The bigger the better. They recomended 90psi pressure and with small air compressor you will be waiting more then blasting.
thanks
ah crap! just bought. didn't work either. time for mod. thanks! I was using walnut shell, probably much bigger than soda or glass bead.
Have the same gun don't work thanks will try this thumbs up.thanks again 👍😀👌😊🙂