Tips to do a better job: 1. Wash you hands 2. Do this in a less dusty environment eg bathroom 3. Before pushing bubbles out let the screen completely set
@ilianajawando77469 ай бұрын
Nice.ganun lang pala yun.thanks for sharing..😅
@rfintv9664 Жыл бұрын
Always switch off fans in the room five minutes before applying and avoid bed sheet pillow carpet etc use table or other clean surface without cover be it cotton or cotton type
@psen.9659 Жыл бұрын
Thnks bry
@salammageorge5590 Жыл бұрын
Great tip, I literally turned my fan off while watching the video lol, then read your comment afterwards and was like, oop well I got one step right, but I should probably get off my bed then huh lol. Thanks for the advice 👌🏾
@Dj3nlightened Жыл бұрын
@@Dj3nlightenedqqqqqqqqqqqqqqqq❤❤p
@keralamusiq Жыл бұрын
That's why i got very annoyed when i do mine, There's always dust attached, after cleaning here it pops up there, and it keeps happening, I'll try it next time
@karemaykojella600610 ай бұрын
Thank u for showing me this.. gusto ko din lagyan ng tempered glass ang cp ko.
@arielmermaid7668 Жыл бұрын
Right use of guide sticker
@psen.9659 Жыл бұрын
I learned to accept bubbles 😂 na stress lang ako lagi sa pag install niyan
@eddieme20094 ай бұрын
Thanks, I didn't know how to use the Guides
@Waingro80811 ай бұрын
you still have bubbles there Lol
@issamregui-rr2yq Жыл бұрын
😂😂😂😂😂😂
@celine78112319 ай бұрын
you need calm br😂
@yann19548 ай бұрын
haha
@jerryboybibat66448 ай бұрын
I did the same and still have bubbles 😅
@cluster-may-anncalceta50033 күн бұрын
Thanks for the tutorial!!
@hosamawadallah1271 Жыл бұрын
thank you for this 🤟
@saijapz16 Жыл бұрын
Thanks for posting
@warriorgp46408 ай бұрын
Wow ganyan lang pala kadali ikabit yan thank you for sharing this video
@flowergarden4716 Жыл бұрын
Galing di na kailangan magbayad.
@kittiele2338 Жыл бұрын
Thank you. I purchased a kit and it didn't have instructions. This was the 1st video I looked at and it was the exact same kit as I've purchased, different phone tho. The guide stickers I backed up with three proper lengths of electrical tape to ensure it was in the right position. All good here, thanks 👍.
@mattsmedley.onehandedgamin90297 ай бұрын
Thank you 🥰
@mommygayle7 ай бұрын
mas inuna ko iset ung protector and guide sticker bago ko nilinis ng wipes ung screen ng cp ko kase dudumi din kapag pagkalinis mo saka mo iset ung protector
@elein_orcea9 ай бұрын
I have always found these guide stickers to be inaccurate and a distraction.
@stevewood5655 Жыл бұрын
So, it worked good without?
@edi5095 Жыл бұрын
salamat a96 phone ko tapos may bubble napabili tuloy ulit ako
@johnnathaniellucas5863 Жыл бұрын
Cheers for the instructions
@frogsintheforest7 ай бұрын
Wow. Nice tutorial. Now I can do it my own.
@jasminintaiwan Жыл бұрын
I'm doing this right now coz I'm selling tempered glass. I suggest not to use the guide. Once done cleaning the phone screen, peel the tempered glass' sheet cover as fast as you can and mount it on the top of the phone without touching the screen yet (1mm distance). Then manually sight the sides if it's aligned (all sides). Then slowly drop the tempered glass and tap it to stick on the phone. For air bubbles, just slowly brush it on an outward direction (so air will exit on the sides).
@KTrendPH4 ай бұрын
Hi, can i use scotch tape to pull some possible dust from the screen before applying the tempered glass? Tia
@fierymoth43304 ай бұрын
Yes
@mommygayle4 ай бұрын
Thanks. Nagiinstall ako now. Buti nabasa ko comment mo. No bubbles pero offset naman sa left side hahaha di ako gumamit ng guide tsaka dust absorber haha
@haruto464 ай бұрын
❤
@ashanshanuka63049 ай бұрын
excellent thank you 😊
@rod3rick797Ай бұрын
awesome
@chichixamz3187 Жыл бұрын
tq mommy
@nikil2138 ай бұрын
Thanks for sharing this video.alam ko na ngayon.#mb
@melsvlogs2259 Жыл бұрын
Thanks 👍
@juliuslobrigo415510 ай бұрын
Nahawakan mo rin yun likod ng tempered glass kaya nagkaroon din yun ng fingerprint mo wla rin kahit nilinis mo pa yung screen ng phone.
@gab137029 ай бұрын
👍
@kuyaates9252 Жыл бұрын
Ma plastic pb ang ibabaw ng tempered
@yajranyl6 ай бұрын
so that's how you use the guide sticker
@ichiryoka887 ай бұрын
Excellent tutorial. Shows you how not to do it. Thank you, Sir.
@steppenwolf516Ай бұрын
nice greasy fingers 🤷♂
@sevenspec Жыл бұрын
what about that air bubles..? 🤣
@musiclife338210 ай бұрын
Looks like you touched the unprotected screen to me
@jonathanbickerton74958 ай бұрын
I'll try this before grabe ang hirap.. Mabubbles but now I know na.. Ganito Pala ang ticnic. Thanks for sharing
@kamammiesvlog8274 Жыл бұрын
That's bubble made me shit everytime i try to installed
@android199x3 ай бұрын
I'm trying to find the function the clear packet that looks like oil with a tiny brush on the side thing...... What is that for lmao
@kal928 Жыл бұрын
It's for the side of your screen, so when it does have bubbles
@tristangelvezon-wp2jt Жыл бұрын
@@tristangelvezon-wp2jt do you have any video I can watch of
@kal928 Жыл бұрын
I’m doing mine rn and why my wet wipe dry 😭😭
@hihippie11118 ай бұрын
Put alcohol
@mommygayle8 ай бұрын
D ko p nkbit screen protector ko nag crack n s bag bitbit ko ngaun dhil ikakabit ko haiisst
@melpacetebautista75 Жыл бұрын
My bubbles kaya 😂
@ako_si_daks74793 ай бұрын
Whats that blue thing
@isaacallaga2430Ай бұрын
Still bubbles 😂😂😂😂
@Zifeldt10 ай бұрын
Me too
@justME25_22 күн бұрын
Where's the lenka bootleg music ?
@randomrandom6071Ай бұрын
Do we remove the polythin on the screen that comes along with new phone
@BRIJ15019 ай бұрын
Mine i didn't remove it.
@mommygayle9 ай бұрын
yes
@DRIFTRAGE9 ай бұрын
Of course
@ChrisT-O7 ай бұрын
Thanks for sharing poh,
@secretarynifdpsj1861 Жыл бұрын
on the left was one.... :P
@sebastiant.j.846510 ай бұрын
😁
@mommygayle10 ай бұрын
Why are there so many fingerprint
@Indian123358 ай бұрын
juslema ako mali pag gawa mo ng temperd glass
@kertnereyclemente43988 ай бұрын
Lol
@GlennPascual438 ай бұрын
Fl. 😊
@chandralaasamana89895 ай бұрын
I have this kit and my fingerprint sensor stopped working after the replacement. Now I either remove the protector or won't be able to use fingerprint. Trash product.
Tips to do a better job: 1. Wash you hands 2. Do this in a less dusty environment eg bathroom 3. Before pushing bubbles out let the screen completely set
Nice.ganun lang pala yun.thanks for sharing..😅
Always switch off fans in the room five minutes before applying and avoid bed sheet pillow carpet etc use table or other clean surface without cover be it cotton or cotton type
Thnks bry
Great tip, I literally turned my fan off while watching the video lol, then read your comment afterwards and was like, oop well I got one step right, but I should probably get off my bed then huh lol. Thanks for the advice 👌🏾
@@Dj3nlightenedqqqqqqqqqqqqqqqq❤❤p
That's why i got very annoyed when i do mine, There's always dust attached, after cleaning here it pops up there, and it keeps happening, I'll try it next time
Thank u for showing me this.. gusto ko din lagyan ng tempered glass ang cp ko.
Right use of guide sticker
I learned to accept bubbles 😂 na stress lang ako lagi sa pag install niyan
Thanks, I didn't know how to use the Guides
you still have bubbles there Lol
😂😂😂😂😂😂
you need calm br😂
haha
I did the same and still have bubbles 😅
Thanks for the tutorial!!
thank you for this 🤟
Thanks for posting
Wow ganyan lang pala kadali ikabit yan thank you for sharing this video
Galing di na kailangan magbayad.
Thank you. I purchased a kit and it didn't have instructions. This was the 1st video I looked at and it was the exact same kit as I've purchased, different phone tho. The guide stickers I backed up with three proper lengths of electrical tape to ensure it was in the right position. All good here, thanks 👍.
Thank you 🥰
mas inuna ko iset ung protector and guide sticker bago ko nilinis ng wipes ung screen ng cp ko kase dudumi din kapag pagkalinis mo saka mo iset ung protector
I have always found these guide stickers to be inaccurate and a distraction.
So, it worked good without?
salamat a96 phone ko tapos may bubble napabili tuloy ulit ako
Cheers for the instructions
Wow. Nice tutorial. Now I can do it my own.
I'm doing this right now coz I'm selling tempered glass. I suggest not to use the guide. Once done cleaning the phone screen, peel the tempered glass' sheet cover as fast as you can and mount it on the top of the phone without touching the screen yet (1mm distance). Then manually sight the sides if it's aligned (all sides). Then slowly drop the tempered glass and tap it to stick on the phone. For air bubbles, just slowly brush it on an outward direction (so air will exit on the sides).
Hi, can i use scotch tape to pull some possible dust from the screen before applying the tempered glass? Tia
Yes
Thanks. Nagiinstall ako now. Buti nabasa ko comment mo. No bubbles pero offset naman sa left side hahaha di ako gumamit ng guide tsaka dust absorber haha
❤
excellent thank you 😊
awesome
tq mommy
Thanks for sharing this video.alam ko na ngayon.#mb
Thanks 👍
Nahawakan mo rin yun likod ng tempered glass kaya nagkaroon din yun ng fingerprint mo wla rin kahit nilinis mo pa yung screen ng phone.
👍
Ma plastic pb ang ibabaw ng tempered
so that's how you use the guide sticker
Excellent tutorial. Shows you how not to do it. Thank you, Sir.
nice greasy fingers 🤷♂
what about that air bubles..? 🤣
Looks like you touched the unprotected screen to me
I'll try this before grabe ang hirap.. Mabubbles but now I know na.. Ganito Pala ang ticnic. Thanks for sharing
That's bubble made me shit everytime i try to installed
I'm trying to find the function the clear packet that looks like oil with a tiny brush on the side thing...... What is that for lmao
It's for the side of your screen, so when it does have bubbles
@@tristangelvezon-wp2jt do you have any video I can watch of
I’m doing mine rn and why my wet wipe dry 😭😭
Put alcohol
D ko p nkbit screen protector ko nag crack n s bag bitbit ko ngaun dhil ikakabit ko haiisst
My bubbles kaya 😂
Whats that blue thing
Still bubbles 😂😂😂😂
Me too
Where's the lenka bootleg music ?
Do we remove the polythin on the screen that comes along with new phone
Mine i didn't remove it.
yes
Of course
Thanks for sharing poh,
on the left was one.... :P
😁
Why are there so many fingerprint
juslema ako mali pag gawa mo ng temperd glass
Lol
Fl. 😊
I have this kit and my fingerprint sensor stopped working after the replacement. Now I either remove the protector or won't be able to use fingerprint. Trash product.
Self sacrifice.
I hate tempered glass