iPhone XS -12 Pro Max Important Battery Message Pop-ups Removing - 100% Fixed
Apple has encrypted the battery of iPhone XS and models above. Once you replace the battery, you will get the “Important Battery Message” and “Service” message. Especially the battery data of iPhone 11 series and iPhone 12 series still can’t be accessed. To solve the problem, REWA LAB has verified the latest solution. Today we will share solutions concerning iPhone XS series, iPhone 11 series and iPhone 12 series.
For more details, please visit our blog: blog.rewa.tech/detail/iphone-...
Products recommended in this video:
Qianli Copy POWER Battery Data Corrector: bit.ly/3hwnXg4
Spot Welder: bit.ly/3CssM3A
iPhone Battery Cell Replacement (XR-11 Pro Max): bit.ly/3jCS1t1
Qianli iCopy 2.1 Repair Programmer: bit.ly/2Trtqg8
Qianli Power Cable(For iPhone 6-11 Pro Max): bit.ly/3AnQeOI
Battery Replacement: bit.ly/3jB7PfT
iPhone Motherboard Repair Training Book (REWA Exclusive): bit.ly/2MJmPKy
For more discounts, you can contact our wholesale team: shop.rewa.tech/wholesale.html
Any questions and demands please feel free to contact us at: sales@rewa.tech
Subscribe us for more latest information.
-----------------------------------------------------------------------------------------
Official Website: www.rewa.tech/
Blog: blog.rewa.tech/
Facebook: / rewatechnology
Instagram: / rewatechnology
-----------------------------------------------------------------------------------------
If you have some repair topics that you are interested in or suggestions for us, please leave your comments here. Products recommended in this video: Qianli Copy POWER Battery Data Corrector: bit.ly/3hwnXg4 iPhone Battery Cell Replacement (XR-11 Pro Max): bit.ly/3jCS1t1
M1 Mac (air, pro, mini) NAND upgrade ❤
Please make a videos for replacement of Iphone 11 pro battery on iphone Xs max for more battery mah
How to properly solder touch ic iphone 11 How to use the next Qianli copy power inner flex (no repair traces) site says you need jumpers? Thanks Rewa preciate you guys very much!
This method have a problem, due to the SOC base coulomb method, this way can not change the chemical ID,which cause the battery bms still work in old heath way too even changed it to 100% as vedio show,please test the new battery standby time to check it.
how to use the Qianli battery copy power for iphone xs? i did, even upgrade the box but doesn't fix the battery message error
Well done REWA! Can't wait to get enough money together to purchase these items. You're doing a wonderful job for the iPhone right to repair community.
Great breakthrough! Thanks REWA
Great work REWA. 👍
Awesome work as always
Thanks for sharing this with fans and we will keep moving forward.
Can you help us to download this program ? We can not get this interface in our program.
thanks for the video, very informative.
Thanks again REWA Technology.
Thanks thanks thanks thanks rewa super super max rewa...
Great video ! 👌🏻
Rewa, you guys are awesome! Successfully transferred the BMS from an iPhone XR today!
Nice, did you need tag on flex?
Luego de hacer el proceso dejas el flex que colocaste ? O lo quitas y queda funcionando normal ?
Hi .Great stuff thank you, Please` where to buy or how to make that power cable for phone you use for inside the phone as you show
Congratulated Rewatechnology🥰🥰👏👍🍎🍎
THANK YOU SO MUCH!
Muito bom o vídeo, saudações do 🇧🇷🇧🇷🇧🇷🇧🇷👏👏👏
Hello , I want to know where i can buy the protection tape with the adhesive tape ... I don't find this . Have you this in your webshop?
Thanks rewa.but still need original BMS. Can solve without it? Copy data from iphone?
Great stuff!
Jeeze Louise, great job! I’m used to replacing my 1st gen SE battery. It’s so easy but I’ll be getting the 12 mini soon. I’m willing to pay the £70 for a new battery when the time comes lol. They are dirty bastards for not allowing people to repair easily. Should be illegal!
It will be illegal soon due to right to repair laws and the environment
'Dirty bastards' and 'illegal,' you said, keep calm and enjoy the wonderful companies like REWA is doing, as you clearly don't know what you're harking about. This repair is easy for a "skilled" technician, but definitely out of the ballpark for the average joe. Professional Shops have to have the right equipment the repair, quality {third-party} parts, microscopy for inspection (as you won't believe the damage that can be cause to the FPC's and surrounding discrete components), so the upfront cost is very high - a professional shop has to buy in quantity to be profitable.
@@nilomyki wtf are you on about, they are talking about the important messages you get when they are unnecessary and can only be removed by APPLE technicians or apple approved service providers
thank you rewa
Rewa has always the right solutions thanks for sharing this. Please make a video how to upgrade nand on iphone 11 pro.
Nobody does it like FixUnlock on Twitter, they are the best
even if your screen is broken and replaced with an original screen, it seems that everything you want to replace has a serial number and can't just be replaced
Apple watching this be like 🤔
😂😂
Hahaha apple say wow
Man fuck apple i need ma phone fix
AWESOME REWA
Hi, i have question, what about iPhone SE 2020. do you need tag on flex, or you can just replace BMS board. When you replacing battery
Ok, this looks cool but can you get rid of that message od you dont have orginal BMS?
I bought your V11 device and I've tried emailing to get some help with the "IIC chip not recognized!" error when using the software. It's been two weeks. Why is it so hard to reach anyone from your company??? I'm a new customer and the complete lack of any help is incredibly concerning.
maybe it's a scam
@@yosamitesam6103 Rewa is a reputed company. Bought many items. I'm a phone repairer.
@@krantikoganti hey do you have any recommendations for a good screen replacement source for like android phones like for galaxy a30 i have an a30 screen damaged carried it to repair and the screen was bulky the touch responds poorly and it stopped working do you know if they have the original screens for replacement or at least real oled screens other than the LCD screens?
Wow the best technician
Thanks for the info, I order 11promax new board to change my faulty board but after the installation it bring wrong battery message. In that case what will I do since the battery is still original
what kind of program in which you can change the number of cycles?
at least it's not too hard, thanks!!
Activate the battery by direct current supply, could you talk us through that? What parts of the connector are the probes on as im getting no response from it when I put the probes on
Hola muy buenos los vídeos me gustaría saber si también envían sus productos a Perú? seguiré atento a sus videos
Gracias! si, puede enviar a peru.
@@rewatechnology2008 yo entre a la tienda seleccióne un producto y me salió a tu país no está disponible 😞
Do you have by any chance any repair shop here in the Philippines that uses this?
Rewa greet teacher
is it possible to use icopy plus 2.1 reprogramer for this job?
where can i buy good aftermarket battery?
Do we get 3600mAh 100% full capacity after we recalibrate from QuanLi battery tool software?
That pcb board for reading data we have to remove after reading and save?or we have to keep connect with battery include that board?
Did you get any answer? This is my question too…
Are both, the iCopy Programmer and the PCB-board required to read&rewrite iPhone 11 series cycle count/health or can u also use the newest module of the JC V1S ?
What is the voltage setting in the power supply to power the xs max to power on?
Ladies and gentlemen we did it 🙌🏿👏🏿
Is that copy power support face id or true tone?
Is this repair possible without knowledge of soldering?
Nice
Hi, great video! Every time I spot weld the anode and cathode to the bms it pops and burns out some of the batteries nickel cathode? Do you know why this is happening and how I can get around it?
I had this happen too, please try and exercise on old batteries an make sure to really push so that theres no space between the motherboard and the cathode/anode of the battery cell.
Good morning, I have a problem with iPhone 11 and especially with battery error. Firmware installed 15.3. Swapped battery connector. When connected to the iPhone still shows the error battery. I tried also with the external flat and still shows error. The problem is the firmware 15.3 or I made a procedural error? Thanks for reply
Superb
So does it work for 12 now or not yet and if I want to purchase and get it here in Nigeria what will be the total price please?
After you reset the battery efficiency back to 100%, does it still drop as it normally would? Like would it always stay at 100%, or will It lower as the battery degrades over time?
Original BMS should work normal.
is there a special class for battery pop up material?
Maybe you can also find a way how to install Ios 15 on Iphone 6plus. Many would love to know about it.
Is there any solution for SE 2020 battery cycle / eff. reset?
Tienen alguna tienda en AliExpress?
Great
hola hacen envios a colombia?
Apple works hard but rewa works harder
We have to keep tagon flex there in the phone?
Hy Rewa Pls help me decide if my phone is safe because a repairman who replace my iPhone 11 battery used liquid gel super glue instead of the adhesive tape pls will this damage my iPhone or battery this was applied on the battery compartment before placing the actual battery on top of it
the flex add cable must be definively into iphone?
relevant with the release of ios 15?
Do I also need the pcb board for the iphone se 2020? Or is it enough if I spot weld the original battery board onto the replacement battery?
no es necesario, solo necesitas la copy power 2.1 para poder modificar la condicion y los ciclos de la bateria
Good
Sir can you tell me➡️ it can be 100% battery health ? after if i replace new copy battery to the i phone xs max
Thanku
Can someone help pls, can I use the qianli icopy plus 2nd generation to program the iPhone 11 and above models instead of using the qianli copy power, very much appreciated
I've changed the motherboard for an i11 and this message appears with another one saying screen is not original. All components are original. How can I delete those messages?
make A VIDEO ON double decker cpu reballing process
Can we recalibrate the original battery without changing cell, using programmer ?
great work you guys are amazing screw apple for being so dirty with ther sneaky dirty tricks great channel guys love it
Why do we need the tag on flex when we got the BMS board?
os mais brabo aí
hi! how to remove the important battery message from my iphone xr? any solution?
can do this without old or original battery ?
How do you activate battery with a direct current supply?
How about iphone se 2020? Message still appear as well?
Do you have solution to important message camera iphone 12 pro max?
can i use icopy plus + special pcb board to read battery data for ip 11 on pc?
Same question
Will you accept phones to fix this issue? I had 2 iPhone XS Max batteries replaced and have this problem. Thank you
Sorry, we currently don’t take personal repairs.
to sum up: iP11/12 needs extra fake bms id board to make new cell work?
yes.. so if u want to replace battery in series 11 you need to buy batteries and tag.. not good.
I newer left pcb flex inside, why are you doing that?
The health percentage will be decreased fast or not?
will updating the phone instead help?
Can i te place IPhone 11 and 12 bateries with icopy plus?
This is great tutorial. but it gets me to think, what is reasonable charge to customer after doing all this to sell aftermarket battery? I guess this would be great for iPhone users who are far from Apple Store or AASP or IRP and have access to local repair shop.
40€
@@Francesca456 ahahahaha going through all that for 40 € no way! A aftermarket iPhone x, not even talking about xs or 11, 12. Is already 18€ or slightly more. Then taking the time to program it, spot weld it, protective tape on it again. No way! 75€ seems like a legit price . Where I live the local repair shops don't even touch it because of the pop up message. So it's either get a professional technician to do it. Or go the apple care a god knows how much they will charge you to pay. Last time I checked a i11 LCD at apple care is 230€ but a proper aftermarket Incell screen is 53€. And you can restore true Tone on that one 15/20 min and job is done
@@Francesca456 just looked it up 11 is 35€ to buy so 75 is the minimal I would ask
@@blackstars1989 usually i pay batteries 15/20€ i still not have checked
apple made battery replacement cheaper is like 75€ for a new battery..
Hi i have iphone xs and i replace its battery from market now its showing battery message i ask the shopkeeper for the old battery he said he dump that. please tell me ho to solve this one and iphone store said that you have replace the battery from market so we cant help you …
ive done mine but it still.has a message saying that recalibration. what does that means
I can use i copy plus 2.2 with flex cable? Instead of copy power??
☝️👆👆👆
For help ☝️👆👆
Can you bring solution for screens please?
No need Ander LCDs called iTruColor came without display message
Hey , any ideas why my iphone xs still is showing old battery eficiency? I removed original battery , resoldered fled to new battery , then reprogrammed to 0 cyclecount and 100% but after boot it still shows 86% instead of 100%. (3utools reports 100% efficiency correctly)
Install nin genuine battery first then install the fixed one
U have to remove original flex can’t do it with the flex that come with battery?
need to copy the serial number of the original one
all this hacks and workarounds just to fix a stupid battery! we need a right to repair law now!
I didn’t replace the battery and got no repair done but still I’m getting this notification
Peace, when you click on the iPhone screen and the colors appear like a rainbow, does it mean that it has already been opened and nothing appears when you press? , does that mean it does not open
1 fpc cable for 1 batery? Or 1 fpc cable for many batery?
Same question
Will we need to restore iPhone if battery efficiency is below 50%
Does it apply to Iphone XR?
The software is only installing old version (6.1.1v please i need a way out
ESIM chip st33g1m2. There is no data when replacing a new chip. How can we use it normally