KZhead
Автокөліктер мен көлік құралдары

AMAZING damaged Motorcycle BMW r1200gs from COPART AUCTION. Buying and Restoring

BelarusCustoms
2023 ж. 27 Мау.
828 590 Рет қаралды
Жүктеу

AMAZING damaged Motorcycle BMW r1200gs from COPART AUCTION. Buying and Restoring

Пікірлер

  • I thoroughly enjoyed watching this amazing transformation. Well done!!!

    @Kornholeeoo@Kornholeeoo8 ай бұрын

  • I almost cheered with you when it cranked. That's always a great feeling. I was inspired. Thanks for posting.

    @jude.v25@jude.v2510 ай бұрын

  • Great job mate it is great to see stuff actually repaired and not thrown away and replaced 👍🏻 Enjoy it and keep the great job!

    @steis91@steis914 күн бұрын

  • Very nice job done! Especially cause you reused the old repaired parts without just buy every stuff new.. I wish you always a enjoyable ride. Greetings from Germany ✌🏻

    @oho.one_hand_only@oho.one_hand_only9 ай бұрын

  • I really like the way you fix broken parts and change parts.very satisfying.good luck making useful content for all motorcycle users 😊❤

    @martinb.rowney4818@martinb.rowney48188 ай бұрын

  • Well done guys, great result without just replacing everything.Great to see stuff being repaired.

    @ianrobertson9968@ianrobertson996810 ай бұрын

    • Replacing parts and repairing parts is not the same, No feat.

      @endriubiker195@endriubiker1958 ай бұрын

  • Great job. I love the additional fabric side pockets and the tool box. Are the crash bars going to be strong now they have been bent? I think BMW panniers would be nicer.

    @revanslacey@revanslacey10 ай бұрын

  • I'm after doing that twice. In 2005 bought a 2001 first $1000, bought parts first $2500, road the bike until 2014 with 100000kms on it. In 2014 bought a damaged 2014 R1200GS for $4000, put $2500 into it, just sold it for $12000 after putting 90000kms on it. Decided on a brand new 2022 GSA.... Nice work on the bike

    @rickwheeler6811@rickwheeler681110 ай бұрын

    • thanks a lot!

      @belaruscustoms@belaruscustoms10 ай бұрын

    • BMW no longer provides workshop manuals for their newer bikes. Good luck!

      @clayfarnet970@clayfarnet97010 ай бұрын

    • ​@@clayfarnet970don t be ENVY. Bmw owners are richs and can do manteinance in BMW DEALERS

      @Rayban.720@Rayban.7207 ай бұрын

  • Congratulations on this outstanding result! I would have cried for sure. :)

    @csabakun3132@csabakun31327 ай бұрын

  • Great work!!! You're an artist!!!💪🏼

    @FernanML@FernanML9 ай бұрын

  • Awesome job. Thanks for showing us and have a great time with the Beemer. 🇸🇪🏆🍻

    @banarne71@banarne7110 ай бұрын

  • Wow you made what looked like a goner parts bike, shine again. increased the value by $10,000 or so. Can't believe you were able to save the crash bars, great job.

    @scottjones5455@scottjones545510 ай бұрын

  • what a turnaround you should be rightly proud of yourselves great bike have fun

    @Richard-pe4cx@Richard-pe4cx10 ай бұрын

  • Great work. Really enjoyed the video. You're a skilled man.

    @trailingarm63@trailingarm6310 ай бұрын

  • I bought a BMW R 1150RT years ago from Copart. 300 pound uk to fix. Basically bike for half retail price. It was flood damaged. Stopped and tipped over into a big puddle. Insurance wrote it off. Hardly a scratch on it. what a bargain. Ran it for 10 years.

    @richarddepledge960@richarddepledge96010 ай бұрын

  • Best motorcycle ever made. Still drives mine after 10 years. And I'm 63yo now.❤

    @MultiCutaway@MultiCutaway22 күн бұрын

  • Da biemvuista che in tanti anni sono stato ti faccio i complimenti per la cura che hai avuto per sistemare al meglio tutti i piccoli danni che ha subito la moto, in realtà le vecchie BMV non avevano tutti questi pezzi. Se fosse stata mia questa moto avrei trovato qualche soluzione per non vedere il tubo appiattito del paracilindro sinistro, ho quasi 80 anni e ho nella mia vita posseduto e restaurato circa 43 moto. Un saluto da Roma👍👋

    @robertocentonze9653@robertocentonze965314 күн бұрын

  • You’re SUPER SUPER PROFESSIONAL. Respect !!!

    @nicopelle72@nicopelle7210 ай бұрын

  • That's one of the most amazing video of I ever seen. I own one of this models, and there's always joy

    @bernardocarlosfundulo6656@bernardocarlosfundulo66567 ай бұрын

  • Compliments on a great bike and great restore job, enjoy the sun!

    @maxnex7676@maxnex767623 күн бұрын

  • Awesome dude. Have fun with your new bike!

    @sv7017@sv701710 ай бұрын

  • Nice work and very nice video, very interesting. Very useful to learn how the boxer works, and how to fix the 1200. Congratulations.

    @motoboomer2616@motoboomer261610 ай бұрын

  • @13:34 the way you fixed rear turn indicators is just amazing 😁👍.. by the way nice job brother 😊 great to see that..

    @factsreality13@factsreality13Ай бұрын

  • Thanks for sharing this. I thoroughly enjoyed watching the transformation. I would like to know the brand of panniers you used please.

    @MrSumgi@MrSumgi2 ай бұрын

  • Superbe travail, j'ai eu des frissons au prémier démarrage 👏💪

    @mplanam@mplanam10 ай бұрын

  • Super Glue on the rear turn signal bodies as a "fix" is wild lol

    @Weaponized_Autism@Weaponized_Autism2 күн бұрын

  • This guy is knowledgeable. Even make side panniers

    @ssenungibostoney749@ssenungibostoney74910 ай бұрын

  • Amazing skill in restoring this motorcycle.

    @Grandliseur@Grandliseur9 ай бұрын

  • Can i ask. The website did you use to know how to fix the bike?thanks you so much

    @ThanhHoang-ms2tm@ThanhHoang-ms2tm9 ай бұрын

  • Nice job! Hard to believe it is the same wrecked bike.

    @illiyakuryakin3092@illiyakuryakin309210 ай бұрын

  • Awesome work and content! Congrats

    @andrefpereiraalves@andrefpereiraalves10 ай бұрын

  • Thank you for saving the GS n made it Great, plus a most entertaining n progress video

    @rockychung9990@rockychung999010 ай бұрын

  • Super job! Thoroughly enjoyed watching you skilfully bring back to life a goner bike. If it's not being too cheeky...how much did you spend overall, roughly, on the repair parts and equipment?

    @jwg3463@jwg34636 ай бұрын

  • Tu eres una estrella restaurando Felicidades desde REPÚBLICA DOMINICANA.

    @yamilroedan331@yamilroedan3318 ай бұрын

  • Thank you this was so relaxing to watch ,have done this before i know the feeling of the first start up ,awesome .greetings from South Africa .

    @marcodebeer759@marcodebeer7595 ай бұрын

  • Absolutely amazing work 

    @pekkahommo4005@pekkahommo400510 ай бұрын

  • Amazing!! I love these videos, I love motorcycles and I always repair my own babies!!

    @luiscuellar7136@luiscuellar713610 ай бұрын

  • Hey that’s cool! Where can I buy does aluminum luggage ?

    @fabsdriveexperience2231@fabsdriveexperience223110 ай бұрын

  • That really is a complicated machine. No wonder they cost a lot to service or repair at a shop. Excellent work. Worth greasing the shaft splines too.

    @keyboarddancers7751@keyboarddancers775110 ай бұрын

    • Its garbage.

      @danemiljus5485@danemiljus548510 ай бұрын

    • @@danemiljus5485 If you think this bike, that started the adventure bike class and is still the benchmark, is garbage, I would like to know what bike you think is not garbage. I know it’s not for everyone but it’s been a iconic motorcycle for over 40 years.

      @B-Railed_It@B-Railed_It10 ай бұрын

    • ​@@danemiljus5485poor & useless person said that.

      @suryanifarida4542@suryanifarida45429 ай бұрын

    • @@danemiljus5485tell me you don’t ride without telling me you don’t ride. I rode one of these for 7 years, beautiful engine. Go back to reading Boys own Adventure

      @video3ish@video3ish9 ай бұрын

    • Worlds most selling adventure bike

      @Adventure338@Adventure3389 ай бұрын

  • Nice bike, good job! Don't know if gluing the indicator arms and windshield brackets will last first time you hit a pothole?

    @jamesmacdonald3090@jamesmacdonald30906 ай бұрын

  • Loved the video, thanks. I'm not entirely sure I would want to ride the bike at highway speeds knowing both the stress points that mount the windshield had been superglued back together! also, was the bike crashed by the first owner on the first ride? It looks incredibly clean in all the nooks and crannies and the engine looked like it had run for an hour before the owner slid

    @leightri@leightri10 ай бұрын

    • Well, the inside of an engine usually should look clean, on a bike with only a few tens of thousands kms.

      @DerpEye@DerpEye3 күн бұрын

  • Thanks for the video, you’ve done an amazing job repairing this bike. I was surprised that the BMW engine protection bars (as big and complex a shape as they are) did not protect the rocker cover and internal parts of the cylinder head better. I perhaps would have looked at fitting top quality after market protection bars to prevent similar damage in the future. Great job though, greetings from Australia 😊👍

    @spanky8164@spanky81642 ай бұрын

  • Respect your hard work. A few points though - the crash bars on these bikes help protect valve covers if you drop the bike. If bike is crashed at any speed the damage to the frame caused by the crash bars is possible and is very difficult to repair. - you apparenly spend thousands on expensive panniers but then fix windshield support with super glue? Riding a heavy bike in sneakers and jeans? Are you serious?

    @zarzum@zarzum9 ай бұрын

  • No need for music, this isn't an elevator. Great work. What did you pay for the bike?

    @Wolfmots@Wolfmots9 ай бұрын

  • I'm contemplating doin the same thing, what status was the title and what kind of hoops did you have to jump through to put it on the road?

    @lattitude01@lattitude013 ай бұрын

  • Beautiful work, beautiful bike👍

    @fkat28@fkat283 күн бұрын

  • We have just been doing the same in the UK with a NC750X, that was in need of repair.

    @glynharper1066@glynharper106610 ай бұрын

  • Oh my goodness what a video that was, what an amazing job you did, and that is one super sexy bike!!

    @sherrilltechnology@sherrilltechnology9 ай бұрын

  • Good job.Hope to see more rebuilding❤

    @asunakrito3064@asunakrito306410 ай бұрын

  • You are strong! Keep like that and everything will end in a good way!

    @paulodecarvalho6687@paulodecarvalho66879 ай бұрын

  • Felicitaciones hermoso trabajo y dedicación 👍👏

    @federicoyapura2186@federicoyapura218610 ай бұрын

  • Fantástico trabajo. Abrazo 🇦🇷

    @danieloscarvillalon3856@danieloscarvillalon385610 ай бұрын

  • Great and nice job!!

    @antoniomarzoanotlevsen5343@antoniomarzoanotlevsen534310 ай бұрын

  • gave the bike a new lease on life,, great job

    @rideorfly1@rideorfly110 ай бұрын

  • A lot of time and effort but a great result 👍

    @longkeithdiablo8812@longkeithdiablo881210 ай бұрын

  • A quedado genial, por supuesto que merece la pena.

    @fernandomartin9343@fernandomartin93438 ай бұрын

  • fantastic work, respect😀

    @jeanjacques8836@jeanjacques88367 ай бұрын

  • You had all the tools but nothing to change the tires =D that was funny to me haha

    @wizardz7938@wizardz79384 ай бұрын

  • Пока не увидел наш номер был в шоке!!!! А оказывается наши ребята!!!! У тебя золотые руки!!!!

    @ediked5774@ediked57746 ай бұрын

  • Saludos de Venezuela Edo Trujillo bendiciones 🙏🇻🇪 exitos cada día más hermano excelente trabajo de recuperación quedó como nueva esa tremenda moto dios te bendiga y que cada día te valla de lo mejor hablasos de 🇻🇪🦾💪👏

    @joseparra2648@joseparra26484 ай бұрын

  • very well done, good job, like new bike !!!

    @mitzanodeparetzack2198@mitzanodeparetzack21988 ай бұрын

  • You Sir have SKILLS .....Great video I applaud the repair before replace if possible and a fantastic end result. I hope never to crash my 1250 because I don't have anything like your skill set or tool set.

    @mdaydj@mdaydj6 ай бұрын

    • what tool set?

      @lappi_wojak@lappi_wojak6 ай бұрын

  • Beautiful bike, I would have taken the opportunity to turn it into a triple black though to fetch a higher price

    @BrianDias007@BrianDias00710 ай бұрын

  • do you but it from europe or there is copart in belarus?

    @ImGodUFUCK@ImGodUFUCK9 ай бұрын

  • Excelente trabajo!! Por el valor de la moto yo le hubiese puesto nuevo la defensa de motor del lado izquierdo y no sólo pintar sobre el caño abollado. Buenas rutas!!

    @raulverolo7101@raulverolo710110 ай бұрын

  • Well done! 🤗

    @Ability_to_Swing@Ability_to_Swing7 ай бұрын

  • Good video, nicely done, but this made me sure to never ever get a bmw, cool looking bikes but never was a big fan and now seeing how hard are they to work on made me sure not to get one, would like to try it out how it feels.

    @zsombimezei3770@zsombimezei37708 ай бұрын

  • Quedo mortal men !!!! 😮

    @hugocatrin1817@hugocatrin18179 ай бұрын

  • amazing Job!!!

    @smbelo@smbelo10 ай бұрын

  • Excellent work

    @georgebosman1933@georgebosman19339 ай бұрын

  • I really enjoyed watching this video

    @Yassinerider@Yassinerider10 ай бұрын

  • I dont know Who are you but you are magicien man.

    @chariftoufelaz2205@chariftoufelaz220510 ай бұрын

  • Qué buen trabajo!!

    @MrEddyman00@MrEddyman009 ай бұрын

  • Tolle Arbeit. Super Bike. Herzliche Grüße aus Bayern. Marco

    @diepohlis@diepohlis10 ай бұрын

  • I didn’t catch what you paid for it at Copart? How much all in at the end?

    @edsyphan3425@edsyphan342510 ай бұрын

  • Imagine.. now you can become a delivery Boy 😜

    @valarenthlei2563@valarenthlei25636 ай бұрын

  • Hi I want to know if you can share with me where I can buy parts for the BMW. Cheapers than the factory

    @hilerionewsrhr5313@hilerionewsrhr53139 ай бұрын

  • Hermosa quedó la moto🇻🇪

    @joseparra2648@joseparra26484 ай бұрын

  • Love the GS1200. My dream motorcycle

    @theelephant2887@theelephant288710 ай бұрын

  • No puso el gasto y horas hombre trabajadas . Igual es un genio 👏👏👏👏👏👏👏👏👏👏👏le quedo espectacular la verdad un capo

    @FabianGomez-pg1fk@FabianGomez-pg1fk9 ай бұрын

  • Parabéns agora moto tem dono 👍🇧🇷.

    @Junior-sh7hl@Junior-sh7hl8 ай бұрын

  • A work of art

    @russellvonastel7111@russellvonastel711110 ай бұрын

  • Well done!

    @samuroadventure1227@samuroadventure12272 ай бұрын

  • Very well done enjoy

    @steveedwards90@steveedwards9010 ай бұрын

  • Great job, where did you buy the lock side bags?

    @alimh1114@alimh111410 ай бұрын

    • zubrcase.com worldwide shipping

      @belaruscustoms@belaruscustoms10 ай бұрын

    • @@belaruscustoms Thank you, you helped me a lot, I have been looking for it for a long time

      @alimh1114@alimh111410 ай бұрын

  • Começando a seguir o canal, um salve aqui do Brasil 🇧🇷🇧🇷🇧🇷🇧🇷

    @josemanoelxmarcondes9239@josemanoelxmarcondes92398 ай бұрын

  • COMPLIMENTI per il lavoro svolto e per il video .

    @MASSIMILIANOING@MASSIMILIANOING6 ай бұрын

  • Excelente video, me gustaría saber los costes totales. TOTAL PRICE PLEASE

    @SEMPERE3D@SEMPERE3D10 ай бұрын

  • Enjoyed every part ...good job..except the superglue...I guess this was cheap fix to temporarily test ride it

    @greek-divers@greek-divers8 ай бұрын

  • Fantastic work, fantastic result. Many nights after work, toiling in the shed, and you've got yourself a touring machine par excellence. Awesome!

    @monunyabidness5949@monunyabidness59496 ай бұрын

  • Great video

    @hawkslayers1@hawkslayers110 ай бұрын

  • Delicia este vídeo ,gracias 🎉

    @candelerosbiker@candelerosbiker9 ай бұрын

  • Çok güzel dostum ya tebrik ederim 🙌

    @ilyasc384@ilyasc3848 ай бұрын

  • Extraordinario trabajo!

    @ricardobrykman4983@ricardobrykman49835 ай бұрын

  • В РБ всё еще можно купить на copart? Сколько стоила доставка?

    @cozyalex7883@cozyalex78839 ай бұрын

  • bonjour trés beau travail une moto presque neuve bravo

    @gillescolomban371@gillescolomban3719 ай бұрын

  • Super 👌 amazing wonderful video ever ,I really really enjoyed it, thank you so so sooooo much for it, the best ever ❤❤❤❤🙏

    @montassriziad3386@montassriziad3386Ай бұрын

  • Well done 👍

    @sennubalan3733@sennubalan373310 ай бұрын

  • Magnifico trabajo

    @JorgeRuiz-jz5em@JorgeRuiz-jz5em8 ай бұрын

  • Love watching your videos plz do without music or with very less music..❤

    @anirudh96656@anirudh96656Ай бұрын
KZhead