Why I prefer HDMI Microscope and not Binocular Stereoscope. What is a Barlow lens and comparison
⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com
This is the best channel I've came across on KZhead. I almost watch 2-3 videos of you daily. Thanks for sharing the knowledge. I've learnt a lot from you 🔥❤️
Me also bro❤️❤️🔥
Yes its really cool..you can learn alot of stuff from him..
Me also bro
2, 3??? Those are rookie numbers! You have to pump those number up 🆙
You are the best teacher I have ever seen in a phone repair. Your advice is very valuable to us. Thank you sir.. 🙏❤️
You are my favorite repair channel! Your work is greatly appreciated brother!
Thanks, I really appreciate it.
We appreciate all of your hard work and transparency. You are the man sir! Thanks for all you do!
Your attention to detail and soldering silks are awesome; pleasure watching and learning from your videos. Thanks a ton.
You inspired me a lot, Sir! I almost watched all of your repair videos. I really love electronics before, until I was introduced in the Telecommunication Industry, but still I am not forgotten my passion. I started to produce some instruments/equipments such as yours. I do have now, soldering station, digital microscope and testers. I was a technician before I became an ECE (Electronics and Communication Engineer). My heart is pounding everytime I watched your videos, it makes my enthusiasm in electronic repair backed and grow. Now I started to build my own business, an electronic repair shop while I'm still on my current job to fund my other lacking instruments. My apology to my English, Sir, but I do appreciate all your doings. I do love electronics, same as your. Wish you all the success! Keep it up! I'll be your no. 1 Filipino fan. Thank you. ❤️❤️❤️❤️
Woah! Relax Stan....lol
@@fpvsmurf Are you bothered that some people have passion? Weird.
@@yasha1928 Just a joke. You know what a Stan means? "I'll be your number one..fan. We can be together soon". You're right.. weird!
فخور بحضرتك جدا، كل فيديو بتعمله بتعلم منه حاجه. الله يوفقك.
I wanna thank you for your videos, thank you for letting us be a part of your work, you explanations and your thoughts. I know cutting videos takes so much time. Do that all perfect, i love the way you do that and they way you love electronic stuff and gadgets and tools. I learned a lot from your videos, thank you👍👌
Thanks Stefan
Your my best KZhead repair technician I watch two or three videos daily.
Man after watching 2 other youtubers i have been watching your videos for a week straight you are a surgeon! I am learning so much from your videos already. I would love to have one of these microscopes but I'm just hobbiest i can't justify the cost. Keep on with the videos please!!!
Salutari din Romania. Urmaresc acest canal si mereu aflu lucruri noi. Best Chanel.
You make a good case for your setup. I am glad I held off buying. My reason would be I only have usable vision in one eye so I was going for something with a screen. There are units out there with a screen built in but with the larger screen I can see how you would be better off at the end of the day. Cheers.
i do appreciate what i have learnt through this channel and the content is great and informative.keep up the good work
Thanks for sharing your knowledge and the time for making these videos.
The teaching you provide is very valuable. Thank you.
Aww man I was just thinking about how can I make this more comfortable and you just answered all my questions. It’s always a pleasure watching your videos
Thank you for sharing your experiences and knowledge. It means a lot to me sir.
Genuinely really great to hear "were passing the saving onto our customers". Of course everyone needs to make a living but the world definitely needs more of that type of thinking. Massive kudos 👍
I'm always appreciate you
Love your videos, I learn something new every video, much appreciated.
You do a great job, congratulations on your success.
Thanks for your videos, I learned quite a lot. Excellent!
Thanks for sharing your knowledge
I appreciate watching your work thank you for your professional videos you are the best one I have seen on KZhead.
the work you put in is appreciated, i certainly appreciate it, i dont do repair but if i did decide to start your channel is the first place i would go to for info and help
Thanks Brother
I like the way you share your knowledge. Thank you.
I wish I could fix things as easily as you make out here. I don't do repair per say - just bring up boards I design so a different set of problems. Either way thank you so much for making and sharing all this
Thanks mate, much appreciated. Love from India.
I'm not an electrical/electronics engineer or technician but I've become interested in it after my first time doing some soldering on a video game console (a PS3 to soft mod it years ago) to the point of making it a hobby of mine and probably become one or both (engineer/technician). I have plans to build a small workbench for electronics "repair", mods/projects and much more outside of that (as part of my hobby). So I've been looking for a nice affordable trinocular microscope (from Eakins or AmScope) or alternatives and came across this video. I really like what you said about having comfort using the monitor instead of the microscope with your back bent for long hours (even if I won't be using it for many long hours a day). From research that I've come across for a long period of time, both about microscope cameras and monitors (the latter for my gaming setup), I have found that when using a camera instead of the microscope for soldering or anything else, there's lag from what you're actually doing to what gets shown on the monitor. So if the monitor also doesn't have a low input lag then that's even worse. If I decide to go with the comfort route instead of the microscope, then I will consider getting a camera with low lag, a monitor with low input lag and response time. I just don't know what size though because a lot of the bigger sizes monitors have a higher input lag. A 24 inch monitor for 1080p (if that's the camera's resolution) doesn't sound bad, especially if using it with a monitor arm to move it closer or a 27 - 32 inch monitor for a 4K resolution.
Honestly, i bought a cheap otg microscope at ebay and connected to my phone and place to a comfortable position like your posture @Mr. Alex and i got used to it after 3 hrs of practicing micro soldering its not the best microscope but it serve its purpose. Maybe im used to playing vr-gaming , because the feeling is so much alike cause the brain is detached from the physical hand,
I actually went to school and got a degree in electronics, to do work like this. Now im a capenter;) Love you're channel man ;)
Hi, best wishes from Belgium, long live the king Northridge
Greetings from South Africa Capetown...your Videos is Awesome keep up the good work and inspiration
Thanks for everything you have done. I have started my own repair shop for video game consoles and you have given me so much confidence. Your videos really do help us all!
Thanks so much for your video your work is so helpful thanks for your time you are the best
thank you for sharing your knowledge
I agree on how good this channel is. I do (mainly) iPhones. I used an HDMI camera too. I wish I was the caliber tech you are, I take you up on the graphic card help your looking for. I’m an ham and my microcircuit work is mainly hobby. I doubt I could manage the volume you looking at. Good luck 🍀
You my friend are a king at what you do. Your videos inspire me and give me an education i can't purchase. Much love friend.
Thanks Mathew.
Appreciate your work!
It's probably worth mentioning, that when you lay back, you don't inhale those toxic fumes that were generated during soldering. I know you guys are using some kind of ventillations, but still, it's a big advantage for someone who does this during the whole day.
100%.
Yep, fume extractors help but they can't get all of it. Plus the added benefit that you're not hunched over squinting into a scope all day does wonders for your neck and back and lowers eyestrain.
thank you for the tips sir, im confused what i need to buy between the 2, now i have the idea
It is the end result that counts! As long as the equipment works satisfactorily for what you are going to use it for, the equipment is good for you and you do not need anything else.
This is fascinating. I thought you only used the camera for video posting purposes. I didn't know you used it for practicality. Can't wait to save up the funds to grab one of these.
Good job, nice explanation keep it up and God bless you
Ergonomics is so important. Great video.
wonderfull short tutorial sir.. Masha Allah 🤲🏻
Thank for the shop managing advice.. grazie
I love your videos, I like them a lot and I will start now here in Portugal, and I will buy a cheaper micro. In the future if things go well, I will think of one just like yours and buy from your store. In this case I am starting by trying to recover a board from a pioneer receiver, desoldering some DTS audio chips..... Thanks for all your explanations, good videos, and all the best to you there. If I was closer I would have applied for the job you were offering :) I am thousands of miles away.
Favorite channel. Is hard passing from stereo microscope to this one... Time will say. Anyway keep up. Maybe one day you can show us all the other equipment you got
Excellent information friend seen on 6/9/2022 greetings from Pennsylvania Parkesburg, I have been following you for several years. I am a Costa Rican living in the United States and I thank you because you are already translating your videos. A hug, my friend. And thanks to the translation I know that you sell convenient products and you have already gained a new client. You also gained a new client because I see that he sells excellent products thanks to the fact that he translates your videos into Spanish.... thank you very much for that. * Translated by google translate *
In the way back days I used a surplus dissecting microscope fitted with a simple camera for doing SMD repairs. The field of view was perfect for replacing the itty bitty parts😊❤
Very informative and helpful video. Thanks for sharing. 🤓
Very Insightful as always.Thank you
Comfort is the most important in any work station, what you did to your work station is the best configuration 👍👍
thank you for your interest really
Great video sir. Watching from Phillipines
Excellent discussion.
Poder trabajar de forma comoda y ademas eficiente se agradece muchisimo por supuesto , sobretodo con el paso del tiempo. Poder llegar a casa sin dolores en la espalda ,nuca, etc.
Thanks for this information ❤️
I use a trinocular scope. That way I have the best of both worlds. Some people have trouble looking over at a screen while doing things with their hands. I'm sure they could get good at it if they practiced but if they've done that for many many years, It's a tough transition. I am one of those people. Been using a stereoscope for a very long time so I only have the trinocular so customers can see what I'm working on from the waiting room. But if you're starting out this setup he's using is VERY nice! It truly is one of the best microscope cameras I've ever seen. The resolution and clarity with the antiglare light are crazy good!
Well explained from a pro ...thanks
Great job and video like always
me I sleep around 3-5am just for playing online games, but because of your videos, my wasting of time on playing egames becoming less now. I started learning from your videos, it inspires me, love it watching your videos♥
How is it going for you today?
great work and information. thanks in advance
A single lens takes away depth perception so the stereo microscope does have some advantaged but I must agree, using a stereo microscope does give neck strain and I wake up with a headache because of it.
im alway watching your vlog. im Technician too. i learn more your video how to repair and troubleshot any kind of motherboard.
Love your videos man literally thought you were from some other country because of your accent your only 1 hour away from me lol will definitely stop by your shop one day when I’m out there good good content and I’m planning on buying a microscope from you
Cool channel, now I'm motivated to fix my dead mabookpro, it was dead because some water got into the motherboard (I was riding motorcycle with my macbookpro in my backpack during heavy rainfall, my raincoat was comprimised). I will try to fix it!
I selected such setup for me intuitively before watching this video. And exactly because of the reasons said. My main was not wanting to stare my eyes into some googles and bend myself into the microscope. This quickly get my patience away and make me interrupting the process. Fine tuning manual distance calculation with looking at screen is less of the problem. Comfort! Comfort! Comfort!
One hint at a good scope is to work on concrete floor too . Wood floors in homes will vibrate every time you move .
Hi thank you, your videos are amazing, best wishes Mike in the UK.
Thank you😃👍👌, you are a good human we love you 😃
Salam. Have a great day sir. Enjoyed your video. Keep it up! From MY
Makes total commonsense about your posturing with using that type of scope and not the twin eyes ones👍
Nice video, thanks.
Hi.. Very good channel and great work!! Best wishes from India.
Thanks for video!
saludos profesor, cual es mas recomendable 120x vs 180x, gracias
Does this camera has function to reduce glare and is this manual or auto focus? Appreciate if you could confirm before I place an order. BTW great educational information and videos you share. Thank you.
where do you get the tweezers you are using, they look flexible when you pick up a component?
Nice explain 👏
Like your method however it is important to have a monitor and a camera with high response time. Please let your followers know what is the response time in m/s. Thanks
I like this channel because of the knowledge that i learned here every day from philippines ✌️
Love your honesty Akhi❤️ Greetings from Austria🇦🇹
Because I do not have microscope, I used my smartphone wirelessly with miracast connected to TV and it works :D I only tried few times SMD soldering hehehe 😀😀
Hi, Excellent video's thank you, I wish I could buy your Microscope but here in the UK I would be ripped off almost as much in import duties and taxes when it arrived. Where did you get the stand and which one is it please? Bob
Nice information thank you
your the best of the best, i wish i could get a full course from you here in Israel
Our online courses are starting in January. More details will follow.
thank u very much for ur time bro hussein..greetings from Lebanon.. plz can u tell us what type and mesure of lens u use? best regards 🌹🌹
Very Nice job
Can you put the link for the adapter and Barlow lenses. Thanks in advance.
Ive bought the camera from you, but you don't tell how I can get the picture on a screen & recorded it at the same time on the monitor. What type of capure device do you use / do you connect on your camera?
I use a microscope with a built-in 7" screen mounted on a scissor arm and I would like to try a stereoscopic microscope but space is a luxury, and the scissors arm takes virtually 0 space while the stereo microscope is huge for my small working area. Like with cameras, the best one is always the one at your hands.
You're videos are inspirational......I have a question though where did you learn to do such repairs ?
Would this camera work with any of the other amscope stands. I'd rather prefer one with a base that sits on the desk as to one with an articulating arm that clamps to the side of the desk.
First one, hihi! Ordered myself one, too. Love it! Greetings from Germany!
Hello my friend, I live in France and I want to mount the same microscope ie buy the same tools as the one is what you can send me the link thank you
Thanks bro..
Non of the other people will go so far, really appreciate your review, don't care if your making money from this item. The fact is you went to the trouble to demonstrate the features, try getting that in a shop these days.
Thanks for valuable information i like your videos
The camera you sell does it have auto focus and does it have the IMX 290 sensor?