KZhead
Тәжірибелік нұсқаулар және стиль

HOW TO STRIP CRIMP AND CUT THOSE WIRES!

Caliber8 Tools & DIY
2024 ж. 14 Мам.
125 602 Рет қаралды
Жүктеу

Learn how to use a wire stripper/crimper tool. its one of the handiest most versatile tools you can have in your toolbox.
Learn-
Wire stripping
Types of wire terminals- ring, spade, disconnect, butt terminals
Crimping wire terminals to wire
Wire gauge sizing(10-22)
Cutting wire
Coaxial cable terminals, spark plug cable ignition terminals
Bolt/screw cutting and re-threading using the tool
Sign up for the email list. Grab some great tools and supplies while supporting the channel @:
www.caliber8.com
Best picture hanging tool:
www.exactac.com
Thanks for watching!
#Caliber8Tools #wirecutter #electrician

Пікірлер

  • Have to say this was explained and demonstrated quite clearly and concisely. Very professional tutorial. Thank you.

    @stewartredman2287@stewartredman2287 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

    • yes indeed

      @wagzel@wagzel10 ай бұрын

  • Thank you. Straight to the point for newbie. No unnecessary low yield info. Sub.

    @asdfasdfasdfae@asdfasdfasdfae15 күн бұрын

    • Appreciate the feedback. Glad it helped.

      @Caliber8Tools@Caliber8Tools15 күн бұрын

  • Knowledge is important. Great job!

    @GJ-is6sv@GJ-is6svАй бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8ToolsАй бұрын

  • Whoa, I was like 17min for a wire stripper vid, too much. But as I started watching, I was like oh, this is good info. Very informative, and thank you for taking the time to explain in detail!!

    @aquadoc4080@aquadoc4080 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • 17 minutes well spent! I've never been able to figure out what the other bits were for when I've been stripping wire. The screw cutting holes have blown my mind haha. Cheers from the UK!

    @CaptainSlowbeard@CaptainSlowbeard6 күн бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools6 күн бұрын

  • Wow. People like you make our lives so easy. This is a great tutorial and simplified. I always wanted to know how to crimp and what those other holes and markings were other than the stripper. Much needed. Appreciate 👍

    @riverron99@riverron99 Жыл бұрын

    • Thanks. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • You know, I've been using this tool for nearly 40 years never knew about the screw cutter/threader part. Great video. Thanks

    @dougharlow6037@dougharlow60374 ай бұрын

    • damn

      @devsutong@devsutong3 ай бұрын

  • Just started as a Field Technician, and had this tool for a long time. Never realized it was so many functions in this ONE tool...thank you !

    @sirgesound@sirgesound4 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools4 ай бұрын

  • Thanks a lot for this. Some great info and very easy to understand and digest.

    @chillimocha@chillimocha19 сағат бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools19 сағат бұрын

  • Simple, down to earth, easy to understand. Nicely done, thanks a lot.

    @spiralsongbird2686@spiralsongbird2686Ай бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8ToolsАй бұрын

  • I appreciate the way you explain things.

    @arrowhead6486@arrowhead6486Ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8ToolsАй бұрын

  • Thank you for your video. I just bought a tool similar to this one and I don't know a single thing about it until I come across your video. Your information is much appreciated.

    @ernasmith2117@ernasmith21172 жыл бұрын

  • Thank you very much! Finally a video where the whole clipers are explained.

    @Panter9063@Panter9063 Жыл бұрын

    • Glad it helped. You’re welcome.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • thank you for the amount of detail. I love how you showed the correct method and then showed what to avoid. I have to do some DIY wiring for ham radio and know how to use the crimping tool.

    @paulgarcia1566@paulgarcia15665 ай бұрын

  • First wire tool video where I actually learned something. Well done, Sir.

    @triptonmiller8532@triptonmiller85327 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools7 ай бұрын

  • Thanks for a great lesson. Your close-up video is also excellent!

    @AdobeTalk@AdobeTalk Жыл бұрын

  • Thank you so much man! I’ve been looking everywhere for a tutorial that gets right to the point and doesn’t try to advertise or convince me to buy anything! You have my like and subscribe!

    @davidperez2199@davidperez2199 Жыл бұрын

    • Gla it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Bravo!! Thank you for demonstrating and thoroughly covering each aspect of the wire crimping tool. Excellent job!!

    @howardjohnson6189@howardjohnson6189 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • I enjoy your conversational tone. Feels like you’re directly talking to me. I was looking for a review of a totally different cutter crimper but stayed to the end just because. 😁

    @MsTheaSM@MsTheaSM Жыл бұрын

    • Hey, glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you so much for this tutorial. I have a wire stripper at home, and you just made it so easy for me to understand how to use the tool. 👍🏼

    @pgp7738@pgp773811 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools11 ай бұрын

  • Really good tutorial on how to use the cutter/crimper tool that I have had forever but did not know exactly what the various sections were for. Thanks for the thorough demonstration. Best of luck to you in your efforts.

    @josequintana6526@josequintana6526 Жыл бұрын

    • Appreciate you. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Excellent instructional video! Thank you for taking the time to explain this process in such a detailed manner. It's perfect!

    @boston-strong8887@boston-strong88874 ай бұрын

    • Thank you. Glad it helped.

      @Caliber8Tools@Caliber8Tools4 ай бұрын

  • Very clearly explained. Thank you.

    @oli230@oli2302 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools2 ай бұрын

  • Excellent tutorial - very detailed and comprehensive. Great job.

    @nothing_burger@nothing_burger Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thankyou very much. Im alone and needing to learn these things now. Messed up 4 ring terminals before i watched your channel. Very clear, easy to follow

    @GypsyTheGoatOnTube@GypsyTheGoatOnTube Жыл бұрын

    • Oh, glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you so much for taking the time to create this video. Imma be honest I always thought that electrical work was too advance for me to get my head wrapped around but because my dad's starter motor went out I had to try and help him out. Nobody ever taught me how to use tools but thanks to the internet and gentlemen such as yourself providing information for those that don't know I feel confident i can properly do what I need to help out around the house. Thanks and bless you!

    @Quartered_Rodent@Quartered_Rodent Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you for the most educative tutorial ever 🙏

    @chalysen@chalysen Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • You are alright! Very good explanation, and anyone could learn from you!

    @michaelmorris8889@michaelmorris88892 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools2 ай бұрын

  • Thank you for the video very useful. I love this tool. It's a must need for any tool box. A lot of electricians will say that it sucks but at the end of the day it does work and when the time comes and you need to get the job done it will get it done. I have used it in many major jobs and it has kept true for years. Also it's great for electrical outlets for cutting down those screw sizes which sometimes are to long. Knowledge is power. I really appreciate the video I wish to do some myself fixing stuff.

    @jesusnapoles6103@jesusnapoles61032 жыл бұрын

    • Thanks for the information. Appreciate you.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • You’re a good teacher. Thank you .

    @Koahkissial@Koahkissial Жыл бұрын

    • Thank you. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • That was incredibly helpful, much appreciated!

    @paulneal1290@paulneal1290 Жыл бұрын

    • Anytime, glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you so much for your dedication. Everything has been well detailed I really appreciate you to be honest you are a well explanatory in detail teacher I wish we have more people like in the world

    @fritzsurpris9690@fritzsurpris9690 Жыл бұрын

    • Appreciate the feedback. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Best all around video on these subjects I've seen. I'm heading to the radio shack to cut, strip and crimp. Thanks.

    @RobertIrvin-kq8rm@RobertIrvin-kq8rm Жыл бұрын

    • Hey, glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you so much brother for this. I’m 39 and now getting into cabling as career change. Keep teaching. Peace.

    @Orion3000k@Orion3000k11 ай бұрын

    • You’re welcome brother. Glad it helped.

      @Caliber8Tools@Caliber8Tools11 ай бұрын

  • I just bought one today! I can't wait to flex! LOL THANK YOU!

    @idontplaywithchildren4393@idontplaywithchildren4393 Жыл бұрын

    • Great, glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you. I just bought one of these and didn't know how to use it, except for the wire cutter and stripper. I did a little project as I watched. Thanks again!

    @swm-sm6cu@swm-sm6cu2 ай бұрын

    • Hey you’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools2 ай бұрын

  • Just got one of these tools. Really appreciate the insightful education on it. I like how thorough it is and that you've used the chapters so we can skip what we personally don't need to know. Thank you!

    @saeedneuro@saeedneuro Жыл бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • This was extremely helpful. Thank you so much!!

    @f8nomore@f8nomore Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Excellent tutorial. Well done. Very clear. Thank you.

    @alanj9849@alanj9849 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Great stuff Dillon, thank you!

    @FA7X@FA7X10 ай бұрын

    • Thanks. Glad it helped.

      @Caliber8Tools@Caliber8Tools10 ай бұрын

  • super easy to understand your explanation about this tool!! thank you !!

    @sergiosaucedo3135@sergiosaucedo31353 ай бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools3 ай бұрын

  • Excellent explanation, many thanks 👍

    @frankiebye@frankiebye5 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools5 ай бұрын

  • Excellent video!! This helped me a lot. Thank you!

    @shanemoore4043@shanemoore40432 жыл бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • EXCELLENT! Thank you so much. This was very helpful.

    @leascaart@leascaart Жыл бұрын

    • Glad it helped. You’re welcome.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Excellent video. Thanks for sharing this information.

    @TWC6724@TWC672410 ай бұрын

    • Glad it helped. Thank you.

      @Caliber8Tools@Caliber8Tools10 ай бұрын

  • I've got my one for quite some time and I haven't been using all the futures yet. This is a very thoroughly explained video. Thanks!

    @DIY-ry9so@DIY-ry9so Жыл бұрын

    • Thanks. Glad it helped

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Excellent explanation, thanks!

    @ricardobosqueverde7262@ricardobosqueverde726226 күн бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools26 күн бұрын

  • Thanks for this! Definitely useful

    @jjprsmartguy@jjprsmartguy2 жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • Great tutorial! Thanks for the help!!

    @robertmayott5835@robertmayott58353 ай бұрын

    • No problem! Glad it helped.

      @Caliber8Tools@Caliber8Tools3 ай бұрын

  • Thanks for a great explanation.

    @paulsr.dicrispino642@paulsr.dicrispino642 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you. Very helpful review

    @abdullast3434@abdullast343410 ай бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools10 ай бұрын

  • It helped me complete my job! Excellent video , thank you

    @sqaz@sqaz Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Great tutorial! Thanks so much.

    @maryjohansson3627@maryjohansson3627 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Great job explaining 👍🏾

    @hebrewboy7963@hebrewboy7963Ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8ToolsАй бұрын

  • PC Speakers messed up and just got it fixed, Thanks for the video man💯

    @asinnerast842@asinnerast842 Жыл бұрын

    • Glad it was helpful.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Useful information. Thanks !!

    @jeffsaunders4785@jeffsaunders47852 жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • Thank you SO much for this clear explanation!

    @jimmyp371@jimmyp3717 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools7 ай бұрын

  • Rock Solid video Bud!!! Had no idea that these things can cut and rethread screws!!! Thank You!!!!!!!

    @srtech2205@srtech22053 ай бұрын

    • Always something to learn. Glad it helped.

      @Caliber8Tools@Caliber8Tools3 ай бұрын

  • thank you brow 😊👍🏾 very useful lesson

    @rudigianto7183@rudigianto71835 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools5 ай бұрын

  • great video mister. Thank you

    @emilianorangel8798@emilianorangel8798 Жыл бұрын

    • Thanks. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thank you! I was unsure how to use my kit to fix the wiring of my Fiat 500 gate lights. This was so very helpful.

    @UnDefinedLegacy@UnDefinedLegacy Жыл бұрын

    • Hey, glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thanks for this video! Awesome explanation of how the tool works for the technically challenged like me😀

    @brianamayo2234@brianamayo22347 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools7 ай бұрын

  • Great tutorial. Thank you.

    @thomastammaro693@thomastammaro693 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Hi mate, thanks for this video, it's very useful and well produced. Best wishes from the UK 👍

    @davidhughes4089@davidhughes40892 жыл бұрын

    • No problem. Glad it helped.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • Thanks for the great information it was a great help to me again thanks

    @JlMason3@JlMason3 Жыл бұрын

    • Anytime. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Excellent! I am not much of a handyman so this really helped me. I had been lucky enough to have selected this exact tool at the store, before even seeing your video. Thanks again for a very clear presentation!

    @roygardiner2229@roygardiner22298 ай бұрын

    • Glad it helped. You’re welcome.

      @Caliber8Tools@Caliber8Tools8 ай бұрын

  • Great video, layman's(simple) way explanation, and cool guy. Never knew or thought of the bolt cutter and its purpose until I watched your video! .... can NOT tell you how many times I've bitched about when cutting a screw/bolt (with a regular cutter, not this tool) messing up the threads at the end. So, this tool re-threads the end of cut so you can use it like a new cut-to-length size. COOL!! Thanks a lot!

    @mixalis11111@mixalis11111 Жыл бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Very useful vid! Thank you very much!

    @NotthatRossKemp@NotthatRossKemp Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • beo thanx a lot for that great and clear easy demo but ignition system u didnt mention

    @redruby7869@redruby7869 Жыл бұрын

  • Thank you very helpful

    @meghdadmahmoodi1528@meghdadmahmoodi15286 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools6 ай бұрын

  • Very good informative video, thanks.

    @azamiqbal3027@azamiqbal30275 ай бұрын

    • Glad it helped

      @Caliber8Tools@Caliber8Tools5 ай бұрын

  • awesome video Sir!

    @ezekielgskeen8607@ezekielgskeen86074 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools4 ай бұрын

  • You're the bomb! Thank you...😊

    @sharonstrr@sharonstrr6 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools6 ай бұрын

  • I know English very little, but this is the clearest video I have seen so far on this subject, It has helped me a lot. Thank you very much for doing it.

    @nelsonnajarro3638@nelsonnajarro36382 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools2 ай бұрын

  • Thanks for sharing subscribed and shared

    @ceeceeceecee7753@ceeceeceecee77532 жыл бұрын

    • You're welcome. Thank you.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • Great video. 💯

    @rsuave109@rsuave1093 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools3 ай бұрын

  • Thanks uncle!

    @petes_CE@petes_CE7 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools6 ай бұрын

  • Thanks man!!!!

    @crct2004@crct200410 ай бұрын

    • No problem. Glad it helped.

      @Caliber8Tools@Caliber8Tools10 ай бұрын

  • Thank you very much.

    @MissStuckOnBandaids@MissStuckOnBandaids2 ай бұрын

    • You’re welcome. Glad it helped.

      @Caliber8Tools@Caliber8Tools2 ай бұрын

  • great tutorial sir.

    @kramidanalub@kramidanalub9 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools9 ай бұрын

  • Well done sir.

    @tyronewalker5764@tyronewalker5764 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Thanks for showing the split demo. Other videos I found are using more expensive crimpers that don’t have the same crimper head. Nobody pointed out where to put the split sections in one of these cheap tools.

    @Bamawagoner@Bamawagoner11 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools11 ай бұрын

  • Your intro is super dope

    @lorddarrington2141@lorddarrington214110 ай бұрын

    • Thanks.

      @Caliber8Tools@Caliber8Tools10 ай бұрын

  • Nice ! Thanks

    @rajanne2947@rajanne2947Ай бұрын

    • You’re welcome.

      @Caliber8Tools@Caliber8ToolsАй бұрын

  • Great video

    @brocky78@brocky787 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools7 ай бұрын

  • Thanks got some speakers to work on🙏🏽

    @gangbanggod@gangbanggod2 жыл бұрын

    • Anytime. Glad it helped.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • Been using the tool all wrong 😆 Thanks for teaching everyone how this is properly used. Good job 💪

    @efrahaimrn@efrahaimrn Жыл бұрын

    • But you got it now, don’t you.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

    • @@Caliber8Tools yes! Thank you very much 🥰

      @efrahaimrn@efrahaimrn Жыл бұрын

  • Nice video,wellexplained👍🏾

    @vincepeacham7292@vincepeacham729226 күн бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools26 күн бұрын

  • Well explained

    @tilakraj5339@tilakraj53398 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools8 ай бұрын

  • Wire cutting, stripping and crimping all in one tool. So far I have got by without one just by using the pliers that were already in my tool box. Still a very informative video and this tool is a lot cheaper than others if you want to keep just one tool with your box of connectors.

    @sharonjuniorchess@sharonjuniorchess3 ай бұрын

    • Glad it was informative.

      @Caliber8Tools@Caliber8Tools3 ай бұрын

  • I’ve had this kind of tool for over 25 years and although I had some idea of how to use it and mostly used it for simple wire stripping, I wasn’t fully aware of all the functions such as screw cutting. I recently decided to look into it and found a couple of other videos online but your video is by far the clearest and easiest to follow.

    @daveshongkongchinachannel@daveshongkongchinachannel4 ай бұрын

    • Appreciate the feedback. Glad it helped.

      @Caliber8Tools@Caliber8Tools4 ай бұрын

  • Brilliant, new some of that but the screw cutting holes were always a mystery to me.😎

    @ragamuffinsreclaimbulgaria6463@ragamuffinsreclaimbulgaria646321 күн бұрын

    • Learn something new all the time.

      @Caliber8Tools@Caliber8Tools21 күн бұрын

  • Thanks, truly, all i want is crimp some wires for the connector of my fuel pump connector. Instead of buying a new connector, all i need is to change the connector but i didn't know how to atick the terminals at the end of the cable. I truly appreciate sharing your knowledge.

    @callingofcreation6420@callingofcreation64202 жыл бұрын

    • No problem. Glad it helped.

      @Caliber8Tools@Caliber8Tools2 жыл бұрын

  • Very good.

    @stephen9863@stephen9863 Жыл бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Excellent tutorial. 5 stars. Sep. 2022 A.J. Rashid

    @arshadrashid9321@arshadrashid9321 Жыл бұрын

    • Appreciate that. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Good job

    @TinyIslandMaine@TinyIslandMaine4 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools4 ай бұрын

  • WOW IM A CRAFTING HOUSE WIFE AND MY HEAT PRESS STOPPED WORKING SO I WENT THROUGH TONS OF VIDEOS IN ORDER TO PURCHASE THE CORRECT TOOLS AND BUTTONS TO USE THEN I GOT MY STRIPPING KIT AND WENT THOUGH TONS OF VIDEOS ON USING IT AND CAME ACROSS YOUR ARE A GREAT TEACHER AND YOU EXPLAIN THINGS PERFECTLY YOU DONT RUSH I AM I USING A TOTALLY DIFFERENT TOOL AND I HAD NO PROBLEM UNDERSTANDING THANKS

    @tennilleseals@tennilleseals Жыл бұрын

    • Appreciate you. Glad it helped.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Man, where was this video when I first realized how little I know about this stuff. After a phone call with my dad, my suspicion of what I needed to do seemed correct but most of the learning has been by trial and error. I still needed some additional information like having the split lined up with the tool for the best contact which has been my biggest problem (loose crimps).

    @mikroskosmos5315@mikroskosmos531510 ай бұрын

    • Glad it helped.

      @Caliber8Tools@Caliber8Tools10 ай бұрын

  • Caliber8, good dope on using the what/how of the crimping tool. The one thing I might recommend is the use of a second crimp to reinforce the connection. The first where the wire is just exposed from its insulation, and the second directly behind it on the insulated portion of the wire.

    @msecond8675@msecond8675 Жыл бұрын

    • Great tip thanks.

      @Caliber8Tools@Caliber8Tools Жыл бұрын

  • Felt like i was in school for a second lol

    @isaelvictorio7077@isaelvictorio70778 ай бұрын

    • Nothing wrong with that.

      @Caliber8Tools@Caliber8Tools8 ай бұрын
KZhead