Subaru outback center diff/viscous coupling replacement.
2024 ж. 14 Ақп.
2 127 Рет қаралды
OE number: 38913-AA230/38913AA230.
Problem detected: Clanking from centre diff area in low speed.
No special tools required.
Medium size pry bar is a must for this job.
Always lift whole vehicle for this job.
Do not do this job if you are a beginner in car repair, things can go bad in this specific work.
Vehicle in the video: Subaru outback boxer diesel 2.0 2016.
Excellent presentation. Thanks. One thought. Prior to removing drain plug, remove fill plug. Not being able to remove fill plug after having drained a transmission complicates life. My case was a semi-sealed automatic transmission.
Thank you so much. But this one didn't have a fill plug, its manual transmission is fitted with dipstick which is used for filling also. (It's visible in the final portion of the video)
@@MechanicAnoop Oops. I need to be more patient and watch until end of video before putting my foot into my mouth with foolish statement. I apologize.
A real good one baby ❤❤👍🏻👍🏻👍🏻 Take care 😘
Thanks wife♥️🫂
use the same shims ? did you replace any other bearings ? why all the hammering ?
Yes Same. It's not hammer, It's called as mallet.
Did anyone else notice no gasket or rtv on reassembly? Its gonna leak like a seive. And yes, also all the hammering looks like something not right.
Look again slowly, the gasket you can see(black colour) it is not hammer It's mallet, it was because of the bearing fitting.
What is the cause why u replace the coupling sir?
Clunking noise in low speed, (speed of parking)