How to Build Crystal Power Cells - Long Duration Power

2013 ж. 19 Қар.
1 334 943 Рет қаралды

The complete build process for crystal power cells. 15V version coming up next.
LaserSaber online store at: teslamaker.com/
Parts list and more information listed at: laserhacker.com/?p=326
Live video duration test: laserhacker.com/?page_id=20

Пікірлер
  • I know this is an old video, but thought someone might be interested in what was going on. When you heat the mix of salts the Epsom salts release some of the water trapped in the crystal structure allowing the mixture to partially dissolve. You end up forming a "dry" electrolyte copper/magnesium cell.

    @RobertSzasz@RobertSzasz7 жыл бұрын
    • I’d be curious to see the difference between the different ratios as I think with a tad less borax it would bubble less

      @mattmobile@mattmobile5 жыл бұрын
    • thank you

      @CyanideSpit12@CyanideSpit124 жыл бұрын
    • The term "dry cell" just means that it does not use a liquid electrolyte. Even the driest dry cells require some level of moisture on the inside, otherwise no electrolytic reactions can take place, but the electrolyte is dry enough to become a paste and thus it can be used in any orientation. Unlike a wet cell, which even when sealed is not recommended to use in other than an upright position, e.g. a car's lead-acid battery.

      @stellarfirefly@stellarfirefly4 жыл бұрын
    • kzhead.info/sun/fLyNhayEqXZ4jYU/bejne.html

      @SERGEY-KACHAN@SERGEY-KACHAN4 жыл бұрын
    • Yeah, a lot of effort to produce a seriously badly-designed dry cell, then convince youself the power is magically coming from the crystals and not the difference in electrode materials. The stupid, it burns.

      @bdf2718@bdf27184 жыл бұрын
  • You should clean the copper base in vinegar and salt then rinse off with water and dry. No need to sand, and improves conductivity (you had a dense layer of copper oxide when adding the mixture)

    @justinmcgillivary3702@justinmcgillivary37029 жыл бұрын
  • When i was 8 or 9 years old, i found an old book of ham radio. From it i learned many things. The first was making wet cell batteries using sal amoniac desolved in water as an electrolyte. After making enough cells to power the transmitter i built shortly after, the parents of my friends considered me a possible hazard to their sons. But that was waaaay before the nitroglycerin incident...

    @beshkodiak@beshkodiak4 жыл бұрын
    • Wait... I am not the only person wondering KZhead that had a nitroglycerin incident? This could be good... or bad news.

      @darreld.7174@darreld.71742 жыл бұрын
    • 🤔😊

      @M210555@M210555 Жыл бұрын
    • What was the nitroglycerin incident???

      @DeemyDolly@DeemyDolly Жыл бұрын
  • what would happen if you were to fill the copper bit let it liquefy then once it was uniformly melted move the copper into the cooling stand and then push the magnesium core into it while still liquid. also have you tried cleaning the oxide layer off the magnesium bar. and possibly using a lathe to cut fins into the magnesium to allow for more surface contact. what if you used a magnesium wire coiled around.

    @Lunas2525@Lunas25258 жыл бұрын
    • Wow. Great ideas.

      @AndreLuiz-ip3fh@AndreLuiz-ip3fh5 жыл бұрын
    • i like you

      @naturemom7846@naturemom78464 жыл бұрын
    • Sounds good except that he wanted to keep the mixture out from underneath the Magnesium to keep it from pushing upwards over time.

      @onradioactivewaves@onradioactivewaves3 жыл бұрын
  • I was curious how well this cell performs. So, I built one yesterday and have been playing around with it. Mine is the 2" cap like yours plus a 3" pip soldered to it (like half of a pipe bomb). It gives a 1.23 volt open circuit and about 25 mA short circuit that drops to a steady of 10 mA (0.45 volts). The only change I made; is I used pure KCL (potassium chloride) instead of the no-salt. One thing I noticed; when I first built it and it was hard enough to handle, the Copper was positive and the Magnesium was negative. When it cooled completely, it reversed its polarity. Is that what you have lasersaber? The jewel thief circuit I have doesn't run bellow 5mA and was wondering if you can post the one you're using. Thanks for sharing. Excellent Channel.

    @pirateman1966@pirateman19669 жыл бұрын
  • Did you try to recharge it, perhaps you already do it until a certain using time ? Or Is it a trash battery, when ended des assemble the pieces cleaned up the oxydation and replace the electrolyte ? Last questions how long use possible and wich power in volts and amps do you obtain ? Most of the time, obviously

    @brunokerbaul3826@brunokerbaul38264 жыл бұрын
  • So many years later (2019) but it would appear that melting the ingredients in the copper cap fully, then pushing the center Mg core into the melted ingredients afterwards would be quick and easy. Any issues here?

    @glennkrieger@glennkrieger4 жыл бұрын
  • I would like to support you by buying your products, that you build. Like the atmospherics type of technology ! Thank you for your work !

    @donaldwoods2579@donaldwoods25798 жыл бұрын
  • I made this cell But I did not use heat. I added (mixed in) iron oxide (magnetite). I packed it as tight as I could. I used a one inch copper cap and a magnesium rod about one inch long. 1.43 volts, It really works great. Thanks much.

    @magnetman2010@magnetman20109 жыл бұрын
    • Any updates how long your cell last under load? What was your recipe?

      @crawfish069@crawfish0694 жыл бұрын
  • Why don't you cook the mix and then pour into the mold? That is how I do for my rocket's fuel grains.

    @ernestosaboia@ernestosaboia4 жыл бұрын
  • I stuck a durex cell in a clock and the two handed bastard has been at it none stop for 3 years.

    @williamcox1176@williamcox11766 жыл бұрын
    • Is it still going?

      @jonathanglock1574@jonathanglock15742 ай бұрын
    • Is it still going?

      @MD-ex7cg@MD-ex7cgАй бұрын
    • @@MD-ex7cg yes

      @williamcox1176@williamcox1176Ай бұрын
  • am able to create 3.5 amps with .75 volts with your basic recipie and the addition of one more. using a carbon/graphite + and aluminum channel 2in tall x 1.5 in wide x .5 in as ground. has been running in series and parallel for several years. so thank you lasersaber for your video. was a great place to begin.

    @kandkcattlecompany8917@kandkcattlecompany89176 жыл бұрын
    • kzhead.info/sun/opeJiqWfp4iLo4k/bejne.html

      @user-xf8qz4di2n@user-xf8qz4di2n6 жыл бұрын
  • Fun note, I think this battery lasts so long because something cleans the reaction surface as Magnesium hydroxide [Mg(OH)2] doesn't dissolve in water. Since salt solutions can temporarily produce strong acids, this cell can produce HCl and HSO4 to react with any Mg(OH)2 that may propogate, and since MgCl2 and MgSO4 are soluble in water it clears the Magnesium surface to allow more galvanization. So that's a cool Hypothetical.

    @sulli1189@sulli11893 жыл бұрын
  • I wonder if a thinner layer of crystal would yield better results? Also, I wonder if plates of metal might work better as they'd have a greater surface area.

    @dancoulson6579@dancoulson65792 жыл бұрын
  • Can you explain why you need to use all 4 of these ingredients? I have seen other peoples batteries with only Borax and / or epson salt. Also, other people have "grown" their borax crystals.

    @hippopotamus86@hippopotamus868 жыл бұрын
  • I love you. One of the only clear concise videos.

    @DarkorbitKing100@DarkorbitKing10010 жыл бұрын
  • How am i just now finding your channel? Alternate power source. I love it! Im going to have fun here!

    @ghostrider.13@ghostrider.134 жыл бұрын
    • Michael Donelljr : Same here.! I Néver heard of him nor that crystal power cell.! I gotta know more of that....

      @explosivefreak666@explosivefreak6664 жыл бұрын
  • If you know the chemical reaction which is taking place, you could find a theoretical ratio using stoichiometry.

    @johnfraser8158@johnfraser81587 жыл бұрын
    • @xlioilx How can it be shady? He is up front with his claims and lack of claims..... SMH It works, give it a rest.

      @stevenfeil7079@stevenfeil70795 жыл бұрын
    • @@stevenfeil7079 It is also really dangerous.Giving incomplete info is worse than giving no information at all. He is giving people just enough information to hurt themselves. Borax has a very high PH and should not be used without thick gloves and a respirator. Inhaling the dust when opening that grinder can actually kill you when it mixes with the moisture in your air ways and lungs. Not a single safety warning and he is demonstrating it in unsafe conditions / work practices. Someone seeing this video without knowing the dangers will do the same.

      @excitedbox5705@excitedbox57054 жыл бұрын
    • At first, I LOVE your videos. At second...no,but I enjoy them. You, my Friend, are very unsafe. Your life is yours,however..you SHOULD tell people of the dangers you are facing, so that they can make an informed decision as to mimic you or not. BORAX IS DANGEROUS to skin. POWDERS are dangerous to inhale. You simply do not provide enough information to warrant My Love :( Parts lust? Links to suppliers? Gloves? Respirator? In another video you don't mention capacitor breakdown/leak..

      @BeastOuncelifeian@BeastOuncelifeian4 жыл бұрын
    • @@excitedbox5705 Borax has a ph around 9.5, its safe on your skin to use as a soap and it's even used medicinally/nutritionally for a Boron source. Hence why the box even says "not for drug use". Do some research, Borax can be used for hair loss issues due to inadequate Boren intake, as well as for killing yeast and fugus internally and externally. Yes mixing Borax with other chemical could be dangerous, but it's pretty safe to the skin and even if taken internally in small amounts.

      @onradioactivewaves@onradioactivewaves3 жыл бұрын
    • onradioactivewaves I agree with you. It's also used as laundry detergent. However those use cases are different then grinding into a powder that is breathable and also heating it, mixed with other chemicals.

      @haveaniceday7950@haveaniceday79503 жыл бұрын
  • i have been looking at the cyristal battery [cell] is a better word is your magnessum core made from boiled epsum salt or is it something else Thank You.

    @blackhawk4750@blackhawk47506 жыл бұрын
  • Hi lasersaber, i just made a cell to your salt mix but used a larger plate of copper and a wound ring of magnesium, getting less than half a volt., so i need to get a copper cap and mag rod. I saw your cap looked pre-heated with dark oxidation on it, do we need to do this or is fresh pink copper ok?

    @aracknidd@aracknidd10 жыл бұрын
  • Hello Lasersaber, Have you tried using graphene mixed with polyurethane onto your copper to help reduce the corrosion?

    @freyes389@freyes3898 жыл бұрын
    • The copper is used in the reaction that produces electricity. You wouldn't want to coat the copper in anything. That would be like saying "wouldn't it help to take the clamps off your battery terminals, place tape over them, then put them back on?"

      @tcolondovich2996@tcolondovich29964 жыл бұрын
    • @@tcolondovich2996 That's why he added graphene, a highly conductive nano particle that would allow the conductivity to still happen. It's what our sick freaks in dee cee are putting in the cure that was never a cure at all but a filthy trick to get it in us.

      @kellycarver2500@kellycarver2500 Жыл бұрын
  • Could you use an ionization chamber to harness the particles coming off something very small and radioactive? I've been thinking about it for awhile, and I think you could use an ozone generator in reverse, maybe inside a lightbulb under vacuum to lower the voltage necessary to get across the gap. Failing that, try a wire sphere or a bunch of circles of wire around and very close to the material, then a bigger sphere, or circles, further out. There should be a voltage between those 2 wires, you might even have enough to light a small LED for 50 years.

    @musikSkool@musikSkool3 жыл бұрын
    • Yes, that is called beta-voltaics (similar to photo-voltaics). It takes advantage of radioactive materials emitting beta particles. The voltage is generated exactly as you suggested (by beta particles intersecting at right angles to a copper line). This is a specialized source of power that has limited applications (pace makers, remote electronics power sources, satellites) due to its low voltage and low current. But, it has long life (which is a function of the material's half-life. You can actually buy beta-voltaics batteries. It's perfectly normal but a little on the pricey side.

      @BTC_DNA@BTC_DNA3 ай бұрын
  • How would you go about getting a magnesium core? there's lots of copper pipe around in hardware stores, but I don't know about magnesium.

    @SheWolfHowell@SheWolfHowell9 жыл бұрын
  • Thank you so much also have you thought of using a vibration plate to remove bubbles maybe even specific frequency or maybe vacuum cooling. Finally what are you thoyghts on orgonite ad would it's application by applicable here?

    @irahchandler1310@irahchandler131010 жыл бұрын
  • I think that the most important thing of all these DIY batteries is to measure which method is better in terms of Energy Generation and Lasting AND COST. I have seen over here in KZhead some other projects with batteries made with cheaper elements that generate the same amount of energy. What will be the advantage of your battery?

    @pedroanon@pedroanon4 жыл бұрын
  • I have been researching for about 3-4 years on how to get energy very cheaply that lasts a long time and is good for the environment. Then I found this video about a week ago and I checked out his channel and he seemed like a legit guy so I decided to get the parts and build it. I finished building it today and I couldn't believe it. It Works!! Make sure to try and build it because this battery is amazing. I plugged a motor to it and I'm going to test it for a week, if it goes for that long then I will be amazed!!!

    @ThunderBossGamer@ThunderBossGamer9 жыл бұрын
    • I too would like to know the run time.

      @robertroark4440@robertroark44409 жыл бұрын
    • Robert Roark it has been running for 2 and a half days running a small motor so far :D

      @ThunderBossGamer@ThunderBossGamer9 жыл бұрын
    • seeking Sandman dude the stuff to make it is expensive it took me more than 20 bucks to make this one

      @ThunderBossGamer@ThunderBossGamer9 жыл бұрын
    • seeking Sandman You funny me

      @ThunderBossGamer@ThunderBossGamer9 жыл бұрын
    • seeking Sandman XD

      @ThunderBossGamer@ThunderBossGamer9 жыл бұрын
  • I have a question when building the cell while the cell is powered those the cell produce heat and what are the temp. what is the out put power this cell is generating according to those measurements of ingredients you put together. are they stable when measuring?

    @RoyalMajestyCreators@RoyalMajestyCreators7 жыл бұрын
  • Thanks for putting this on youtube. I have toyed with the idea of trying this and I think I'm going to give it a shot after seeing this video.

    @flash001USA@flash001USA5 жыл бұрын
  • I'm looking at this from a purely physical manufacturing angle, and think the efficiency & energy density can be greatly increased. Instead of a copper pipe end cap, a honeycomb structure of copper, solid sheet on the bottom, open on top. For the Magnesium, instead of a solid round cylinder, a flat sheet with hexagon shaped shafts coming out of it, properly sized to 'nest' inside the copper honeycombs with the proper spacing. Place the copper honeycomb on the hot plate and fill the cells with the powder. Heat to the proper temperature, getting the solution to just the perfectly mixed viscosity, then lower the magnesium panel into it from the top (with insulated bolts/spacers around the outside between the plates to keep them perfectly aligned and spaced). Then, pull the whole cell off the heat and set in the cooling tank, until curing is finished. Positive connects to one side, negative to the other side. They could be stacked in series, just like stacking the flat button-cell batteries we use in watches & hearing aids.

    @kawikahokulani@kawikahokulani9 жыл бұрын
    • Hmmm. That is a good idea

      @speedyguy8@speedyguy85 жыл бұрын
    • Nice idea, but very expensive and time consuming to manufacture.

      @AustinSteingrube@AustinSteingrube5 жыл бұрын
    • Why don't you demonstrate on a video in response to this video. That would be very cool.

      @phorgive@phorgive4 жыл бұрын
    • the hexagonal shapes would be extremely expensive, how about overlapping sheets? like how capacitors work except with electrolyte instead of a dielectric

      @kadenlarson9992@kadenlarson99924 жыл бұрын
    • yes no now that’s the idea. Like a spiral?

      @sethery7826@sethery78264 жыл бұрын
  • Ive built one for my hearing aid it works great, the only problem is its size, so i had to tape it to the side of my head, since doing this Ive notice that when i go for a meal everyone runs out of the restaurant.

    @tonybaines3332@tonybaines33328 жыл бұрын
  • Gratulations, 1 mil views after 5 years. Interesting theme and ...... well done!

    @Bertoaus@Bertoaus5 жыл бұрын
  • hi, i was wondering if it can be made without alum in the mix (around here alum is really expensive.......almost $10 for a crummy little 40 gram tin). an answer would be really appreciated.

    @jimw83296@jimw832968 жыл бұрын
  • I’m not sure if they’re great as batteries, but if you use two galvanized pieces of metal instead of zinc and copper, the capacitance as a capacitor is immense

    @filigenzilab9613@filigenzilab96134 жыл бұрын
  • YA I AGREE THANKS FOR THE GREAT HOW TO VIDEO!!! IM 17 JUST GOT A JOB SO I KNOW WHAT IM DOIN WITH FIRST PAYCHECK!

    @MicahSedillo@MicahSedillo10 жыл бұрын
  • Can we use it to store voltage in capacitor and power a vibrating device for muscle cramps etc?

    @ShashwatAnand123@ShashwatAnand1233 жыл бұрын
  • If You could tell Us about where you got the Magnesium core from , that would be really helpful for me. thanks

    @flavioshanti@flavioshanti3 жыл бұрын
  • He does the output of the cell hold up after two years? What is the output after two years please? Thanks, Charles

    @CharlesFraser@CharlesFraser10 жыл бұрын
    • "He does"?

      @MikinessAnalog@MikinessAnalog3 жыл бұрын
    • Mikiness Analog He Man and the masters of the universe

      @barakbender3845@barakbender38453 жыл бұрын
    • @@MikinessAnalog i think Carles meant hé

      @DanielsThierry@DanielsThierry3 жыл бұрын
    • Well I'm guessing that what he is using that runs off this battery only draws a low current.

      @scootergrant8683@scootergrant86833 жыл бұрын
    • you're a dmb fk, it doesn't provide any energy after 10 minutes after it cools down and the metal wears off as well

      @shanewhite352@shanewhite3523 жыл бұрын
  • Have you ever thought about dumping all of the ingredients in a ball mill? Would mix and pulverize everything all together :)

    @toysareforboys1@toysareforboys110 жыл бұрын
  • hey, lasersaber......alumina is really expensive in my area ($8.97/800g tin!), will the battery work without the alumina? please let me know. (i'm planning a battery with a 32" core)

    @jimw83296@jimw832969 жыл бұрын
  • can this be done in a square sheet form instead of pipe Magnesium sheets are like 5 bucks a peice so i think i could make a layered cell of copper and Magnesium and use an oven pan to bake the whole thing in an oven cut away the pan when it is done

    @michaeld954@michaeld9546 жыл бұрын
  • Hey lasersaber I made your crystal cell battery for my science fair project I really like this idea Thanks

    @blackhawksare1934@blackhawksare19348 жыл бұрын
    • How long did it have power?

      @kellycarver2500@kellycarver2500 Жыл бұрын
    • @@kellycarver2500 Hi there, my crystal cell still admits light to this day and it is 6 years old thanks for asking

      @blackhawksare1473@blackhawksare1473 Жыл бұрын
  • h hello could you tell me the stack compocision ingredients to make fabor you would be very grateful, thanks, greetings from Spain.

    @Juanruizsalamanca@Juanruizsalamanca10 жыл бұрын
    • buenas tardes Juan, yo queria pedir lo mismo sin ser pesados. si te los envia me los podrias pasar? gracias

      @alejandrotimon2588@alejandrotimon258810 жыл бұрын
    • la gente no comparte los inventos ni los planos

      @Juanruizsalamanca@Juanruizsalamanca10 жыл бұрын
    • referente a ese tema ya estube leyendo hace tiempo, si no comparte habra que experimentar. los cristales son las pilas del futuro

      @alejandrotimon2588@alejandrotimon258810 жыл бұрын
    • Disculpa Juan que te corrija.Si lees bien Informacion encontraras un link que te lleva a otra pag. donde esta detallado lo que pides. En tono amigable te digo que la idea es que debes experimentar "by yourself" y de esta forma, no solo aprenderas, sino que podrias encontrar cosas nuevas que tu mismo nos podrias aportar. Recuerda que los grandes descubrimientos aparecen por un error cometido en un proceso. No se si fue un tal Sr Ruiz que por alla dijo "enseña a pescar..." un abrazo.

      @carlosaristizabal8471@carlosaristizabal84719 жыл бұрын
    • @@Juanruizsalamanca Hola Juan. Ya esto tiene bastante tiempo, sin embargo no hay muchos que la allan construido de está manera tan efectiva. Si miras detenidamente el vídeo se entiende, pero tenés que dedicarle tiempo. A mí me cuesta porque no se Inglés, pero lo intento. Un abrazo desde Argentina

      @veganiunaereox3822@veganiunaereox38223 жыл бұрын
  • Any thoughts about applying PG5 Graphite sheets? Perhaps apply them to this build or replace the copper all together?

    @darreld.7174@darreld.71742 жыл бұрын
  • What was the very first thing u added? U say what each of the others are and how much but i missed what the was the first ingredient? Tried to freeze to see can but no luck...help plz .thx

    @nookgal@nookgal4 жыл бұрын
  • nice to see the Baghdad battery is making a come back

    @junktv6279@junktv62798 жыл бұрын
    • not even close, but i bet you felt smart saying that.

      @markcollard9326@markcollard93265 жыл бұрын
  • This is just chemical energy conversion a LED will run a off a lithium battery for 12+ years as some led esp blue will run on micro amps. Camping fire strikers are magnesium but expensive It does work out cheaper just to buy a battery, but this vid is good learning material.

    @hunter00047@hunter000479 жыл бұрын
    • If you go to any army surplus store you can get a big chunk of magnesium in the form of a fire starter for a pretty good price.

      @patrickgardner2204@patrickgardner22044 жыл бұрын
    • Its not always about what is cheaper. Its about not having to use money. Make things with what you have. If you happen to have all the ingredients, you save yourself the money.

      @eternapesadilla2355@eternapesadilla23553 жыл бұрын
    • @(JD) Juan Gonzalez Flores no problem, also, if you have a harbor freight near you they sell the same fire starters for a super cheep price, like a $1.75 each, or something close to that

      @patrickgardner2204@patrickgardner22043 жыл бұрын
    • patrick gardner are they pure magnesium?

      @haveaniceday7950@haveaniceday79503 жыл бұрын
    • @@haveaniceday7950 probably not, but very very pure.

      @patrickgardner2204@patrickgardner22043 жыл бұрын
  • Any ideas why one of these wouldn't work following construction? I've tried just about every variation of alum I could find, and have bought magnesium from multiple sources and still no charge on the volt meter. I'm using potassium alum.

    @jesseklein611@jesseklein611 Жыл бұрын
  • Ok I have a question: Would a water heater magnesium Anode rod be pure enough for this build? I mean you can buy 4 foot by 1 inch rod for 20 bucks as apposed to if you buy "Magnesium rod" where you would pay that for a foot! let me know what you think

    @ClownWhisper@ClownWhisper9 жыл бұрын
  • Simple gavanic potential differences of metals. Take two dissimilar metals and they have a potential different (voltage difference). Thats why using the wrong kind of bolt, or not insulating the bolt when fastening metals plates will corrode and break within a year or two. Statue of Liberty had this problem because it was made of copper. The amount of current from this is extremely low. You can increase the current by decreasing the resistance of the electrical connection between the two metals (best by touching them to each other directly). When the surface of the less noble metals has corroded and breaks electrical contact with the other metal the voltage is gone and current stops, as does the corrosion process. Using the salt mixture between the two increases the amount of metal in electrical contact but does not stop the corrosion. The resistance is also high so the corrosion is slower but the current is smaller than if you had used salt water in place of the solid salt. The amount of power the chemical reaction (corrosion) of the metals releases is extremely tiny and spread of a long period of time. You could sell the metals for the pocket change they're worth, and buy 1000x the amount power of the power company that this would release. The purpose of batteries is that they have the best balance of long-term storage and short-term release of their energy. This takes the long-term storage to the extreme with little to no short-term release of energy, to the point of being completely inpractical for anything.

    @HDRNX@HDRNX7 жыл бұрын
    • You seem to know everything about chemistry and batteries. Can you make your own channel and show us how to make more efficient, powerful batteries. Thanks.

      @lando8398@lando83985 жыл бұрын
    • TROLL

      @remingtonspecial3757@remingtonspecial37575 жыл бұрын
  • Home made chemical battery. The slower the reaction, the longer the shelf life and that's about all you can get from these. Great way to use up what would ordinarily be the leakage any battery experiences. You want long term *and* high power when you need it (none available in the meantime), make a Zinc Air battery of the "dry" kind. It generates no power and has no leakage until you add water to the electrolyte. Then you can get Kilowatts.

    @chefjoesplaylists2565@chefjoesplaylists256510 жыл бұрын
  • Hey does size counts for the battery like bigger it is more power it produces or something like that because I would like to know?

    @gingerzombie3544@gingerzombie35446 жыл бұрын
  • Howdy. I don't think I missed it, but where did you get the magnesium core?

    @michaelpratt3058@michaelpratt30582 жыл бұрын
  • Looks like hes cooking dinner. Wait till his wife sees hes using her coffee blender.

    @renderuthis@renderuthis9 жыл бұрын
    • :D

      @philipplamenov8649@philipplamenov86494 жыл бұрын
  • sure would like to see the current while its liquid and hot.

    @jonmc1334@jonmc13345 жыл бұрын
  • hey, laserhacker......alum is really expensive and hard to get in anything like worth wile volume. will these powercells work without the alum?

    @edgarlatulip4820@edgarlatulip48205 жыл бұрын
  • I'm thinking of getting rectangular magnesium fire starters and putting them in a copper tube to make longer cells, any idea if that will work. Also how much does size matter here? Size of magnesium block, spacing between walls and such?

    @hellishgrin4604@hellishgrin46047 жыл бұрын
  • wouldn't it be easier to cook your mix and then poor it into the cell?

    @mitchellbettencourt8306@mitchellbettencourt83065 жыл бұрын
  • Geez kids. It's a fun chemistry demonstration. He isn't claiming he can power the planet.

    @geoffgeoff143@geoffgeoff1434 жыл бұрын
    • Thats why I sarcastically love people who bitch about "free" energy videos using basic motors from electronics with some sort of rotational system to generate power. It aint coming from the electricity company thus free. Nobody says itll last forever but not many people get youtube has good ideas and bad ideas and sometimes both but they forget to think first and speak second

      @joepoelmans5910@joepoelmans59104 жыл бұрын
    • Wardenclyffe tower....

      @gollygothgirl1956@gollygothgirl19564 жыл бұрын
    • Challenge🤔 excepted🥰🤗 Really could use the 💯 m kzhead.info/sun/fttmpsWianmLbJs/bejne.html NASA challenge kzhead.info/sun/nLyAftVwa196q6M/bejne.html Methane and water on Mars kzhead.info/sun/jb6sppeioHmarKs/bejne.html

      @mrglasecki@mrglasecki3 жыл бұрын
    • Challenge🤔 excepted🥰🤗 Really could use the 💯 m kzhead.info/sun/fttmpsWianmLbJs/bejne.html NASA challenge kzhead.info/sun/nLyAftVwa196q6M/bejne.html Methane and water on Mars kzhead.info/sun/jb6sppeioHmarKs/bejne.html

      @mrglasecki@mrglasecki3 жыл бұрын
    • Challenge🤔 excepted🥰🤗 Really could use the 💯 m kzhead.info/sun/fttmpsWianmLbJs/bejne.html NASA challenge kzhead.info/sun/nLyAftVwa196q6M/bejne.html Methane and water on Mars kzhead.info/sun/jb6sppeioHmarKs/bejne.html

      @mrglasecki@mrglasecki3 жыл бұрын
  • nice video but where do you get a magnesium core from as thats not easy to get and what are the alternatives to the magnesium core

    @stevenchiverton48@stevenchiverton484 жыл бұрын
    • Steven Chiverton hot water tank replacement anodes. Most good hardware stores

      @billwheeler1213@billwheeler12134 жыл бұрын
  • Where did you buy your magnesium core? And will a regular old square magnesium fire starter work just the same?

    @humanmonstrosity@humanmonstrosity10 жыл бұрын
  • What are you planning to power with 10 of these? How much power are you expecting to get? Would power increase if you made one the size of a garbage can? :) I've also loved these since I watched Johns videos. I believe in one he had there was smashed up powdered quartz.

    @Gyva02@Gyva0210 жыл бұрын
    • Current does increase with size. I want to try using the 15V setup as a charger. Depending on it's performance I may have other uses for it as well.

      @lasersaber@lasersaber10 жыл бұрын
    • lasersaber Once you fix the galvanic couple, magnesium and copper here; the voltage of the cell is fixed. Current density will be fixed for an electrode pair and the elecrolyte and the cell geometry used.

      @akvenugopalan9773@akvenugopalan97739 жыл бұрын
    • I know nothing of electronics, but smashed up Semi-powdered quartz is known as Sand.......that's exactly what sand is.

      @thechazman47@thechazman479 жыл бұрын
    • +thechazman47 the maker of the "bloom box" mentioned "the plates are constructed of sand." I know this is an old thread but seen that the other day. Kinda makes me wonder if the mixture was more exposed to air and carbons, if it might produce more power...

      @jackmeeksiii732@jackmeeksiii7328 жыл бұрын
  • Hi Lasersaber, maybe it is beneficial to run a small load resistor during cooling already on the cell, so a current in the right direction is impregnated into the cell already during cooling ? Maybe around 500 to 1000 Ohm ?

    @user-vo1rr6wj3g@user-vo1rr6wj3g10 жыл бұрын
    • It's worth a try. It would be a little like an electret.

      @lasersaber@lasersaber10 жыл бұрын
    • have you tried this yet? did it work?

      @bears7777777@bears777777710 жыл бұрын
    • lasersaber after seeing this video im inspired to remove the electrolyte on my dead 6 volt motorcycle battery and then charge them up to several hundred volts DC low current and then pour some hot beeswax into it and let it cool slowly into an electret!! thanks lasersaber!!

      @fidelcatsro6948@fidelcatsro694810 жыл бұрын
    • is that even possible?

      @bears7777777@bears777777710 жыл бұрын
    • is that even possible?fidel catsro

      @bears7777777@bears777777710 жыл бұрын
  • Always wondered what went into a crystal cell. Nice video.

    @SPIDER1966ENGLAND@SPIDER1966ENGLAND8 жыл бұрын
  • Just wondering, could you melt the mix in a separate container, then pour in to the copper magnesium cell.

    @caidenriggers5972@caidenriggers59728 жыл бұрын
  • It would be helpful if you wrote the ingredient list and written instructions in the description so that the hearing impaired can take advantage of this.

    @SocietyofEnoch@SocietyofEnoch8 жыл бұрын
    • KZhead does have close captioning available which automatically tries to convert the speech into text on the video, but it is not always accurate and often misses things if the volume level on the uploaded video drops, however the person posting a video can add annotations to the video and can add links, formulas and other useful information to the description.

      @SocietyofEnoch@SocietyofEnoch8 жыл бұрын
    • SocietyofEnoch I see you everywhere.

      @tommynorthwood@tommynorthwood6 жыл бұрын
    • all half cups: Alum; Potassium Chloride; Borax; Epsom Salt. mix very well...has Magnesium Core, and copper pipe as a holder. Have on low heat otherwise boiling over is going to happen. let sit for half hour

      @theinquisitor2481@theinquisitor24816 жыл бұрын
    • You could actually use this to charge up a capacitor bank or an array contain both Battery & Caps... How do you know its not re-chargeable? have you tried it..

      @taospencer1403@taospencer14035 жыл бұрын
    • it is rechargeable you just add a few drops of water also he said hes got a live feed on one that's been running a small motor for over 2 years

      @personalitycat9842@personalitycat98425 жыл бұрын
  • This is very cool, man! Now, I just need to build 200 of these and I can be independent from the system. Crystal power, natures ultimate capacitor.

    @lumberluc@lumberluc10 жыл бұрын
    • maybe a self loop generator might work..an ac induction motor running with large flywheels coupled to a permanent magnet alternator (Chas Campbell system)perhaps?

      @fidelcatsro6948@fidelcatsro694810 жыл бұрын
    • fidel catsro This is a motion-less way of getting electricity. So, if your saying if your proposal is better than this, it's best for the one that says it to do it first than suggest it to another.

      @lumberluc@lumberluc10 жыл бұрын
    • lumberluc yes I intend to try that self looper, just cant get the reliable people to make one setup currently as yet

      @fidelcatsro6948@fidelcatsro694810 жыл бұрын
    • fidel catsro Then I believe the most reliable person there can be for you is the one who looks back at you in the mirror.

      @lumberluc@lumberluc10 жыл бұрын
    • You need to redo your calculations. This cell produces 90mA at 15V i.e. 1.35W. Since an ordinary fan heater requires 2KW it would take almost 1500 of these simply to produce 2KW. It wasn't made clear in the video how long this cell could sustain 90mA. It could easily drop to a tenth of that within few minutes. 200 of them wouldn't do anything very useful apart from consuming a lot of money. These may last a long time but the power output is very low.

      @joshuarosen6242@joshuarosen62429 жыл бұрын
  • I have made a few small crystal cells last year which are still holding voltage. I used a mix of Alum, Potassium Chloride, Zirconium, and Zinc Oxide. I used copper for my anode and zinc for the cathode. Heat applied seems to increase voltage as cold decreases it. Each small cell produces between 0.50 to 0.90 V DC but fluctuates based on current room temperature .

    @wmonger@wmonger10 жыл бұрын
  • whats the cork looking thing that the magnesium rod is inserted into? what material?

    @technowizard2694@technowizard269410 жыл бұрын
  • Since it's 1.5v anyway, use small-diameter pipe and magnesium nails, and presto, you got ya some copper-mag AA's

    @bledlbledlbledl@bledlbledlbledl5 жыл бұрын
    • Write my kids toy cars would run forever

      @davidprice7052@davidprice70525 жыл бұрын
    • Recipe is simple enough do it to it

      @matthewfredrickmfkrz1934@matthewfredrickmfkrz19345 жыл бұрын
    • they give much less energy than common AA. But they last forever

      @artofwebdesign@artofwebdesign2 жыл бұрын
  • Setting the cells inside a bell jar under vacuum would solve any air bubble problems ;)

    @jayc2469@jayc24698 жыл бұрын
    • And on top of that use a vibrator to get bubbles out

      @FluorescentApe@FluorescentApe4 жыл бұрын
    • i was just thinking about ultrasonic cleaners. fill it up with water, put your cell in a jar, and set it in the tank. stays dry and no more bubbles.

      @boobam3648@boobam36484 жыл бұрын
  • Do you put water on these during its use ?? I saw one of your videos that you said you put drops of water from time to time.

    @gconol@gconol10 жыл бұрын
  • Man I had a hard time finding your video. It's been awhile. Thanks for still being here and doing this. Is it still running

    @joeallen5074@joeallen507411 ай бұрын
  • Excellent work, as ALWAYS! Please allow me to offer my compliments to your wife. With ALL you have going on, she must be the MOST PATIENT person in the world! =My wife would have me staked out over an ant hill if I had 1/4 the projects as you going on.

    @ogmandin0544@ogmandin054410 жыл бұрын
  • half a cup each of: Alum, KCl, Borax, Epsom Salt Magnesiun core, copper pipe cap.

    @jakerdmarion@jakerdmarion9 жыл бұрын
  • Hello Lasersaber, What is the averge duration of these powercells and do you have to charger them?

    @freyes389@freyes3898 жыл бұрын
  • Ever thought about using nitinol to squeeze a crystal cell into producing more voltage? I've been wanting to try it but I just haven't had time to get a good crystal cell.

    @ApocalypticIdol@ApocalypticIdol3 жыл бұрын
  • Hi! :) I'm very interested in this crystal cell technology and am looking to try an experiment using crystal cells on a far larger scale. My question is simple. Is there any specific reason for using the copper and magnesium? Copper as the containment vessel and magnesium as the core. Can these materials be switched in position or other materials used in their place such as steel as a containment vessel and say copper as the core. I'm almost thinking it probably runs along the same lines as touching a dissected frogs leg with two metals and it jerks and twitches. My goal is to make enough of these cells to run an experiment in running a modest moderate power usage home off them. A complete electric company free green friendly home as the basis for use of just that much less fossil fuel as a pollution free alternative for perhaps the future building of an entire project community. Utilizing abandoned tracts of land either abandoned by flooding in the south or just unused property, my main and ultimate goal would be procurement of the tract of land, construction of homes made with hempcrete and other such natural and recycled materials and then fitting all homes with a crystal power cell electrical source. The goal would be that not even one telephone pole have a power line attached, telephone and cable vision wires only. Next phase after creation of this small community would be finding interested and like-minded people's to occupy and test and evaluate the entire community as a whole and individually by criteria I'm still in the process of thinking out in full. I had started this project out thinking wind and solar as a base for the experiment but this!!! This was an incredible find. I was researching Nicola Tesla and Tesla Coil power distribution when I came across a John Hutchison part of a video on Tesla coils used for the Philadelphia Experiment. I went into John Hutchison, brilliant man btw, and that's what led me here, a search for crystal cell tech. Now that I've seen this, I can with high probability bypass the pollution it took to make solar cells and/or wind turbines which where my original plan and add that to my equations for being as pollution free as possible or keep them in the equation for use as a viable backup. Any and all material information is so welcome you couldn't even begin to believe the value I have for information on the materials and the how's and why's of them.

    @thewisemanwalks@thewisemanwalks8 жыл бұрын
    • +Devina Danado bump

      @thewisemanwalks@thewisemanwalks8 жыл бұрын
    • +Devina Danado Is there a specific reason for using magnesium and copper? Yes. Very much so yes. You need to research oxidation reduction reactions and how they are used in batteries. And there are a thousand ways to make a battery but none of them are particularly cost effective. This unit provides about 1.5 volts and 90 miliamps with is not enough to power very much, even if you have 1000 of them in a row it would just get too expensive. You have good goals and ambitions but they are a little unrealistic, you are basically trying to reinvent the wheel, which you are allowed to do, but the problem of sustainable community development will not be solved with batteries like this. That being said, research "liquid metal batteries" there is company called Alveo i believe that is working on a large scale rechargeable battery that can store megawatts of energy and it is basically made from earth abundant components.

      @mikestoneadfjgs@mikestoneadfjgs8 жыл бұрын
    • Charmonium Pentaquark Wheel...re-invented sugah :) I'm currently running this computer off this tech and an inverter . I'm testing exactly how long they'll last for. The only snag I'm running into is the batteries size. Luckily my basement is fairly large. You mentioned a liquid battery which I'm already in the process of making based on this one. Instead of solidifying the crystal I'm designing it to have water added in a sealed condition. I will look into the oxidation angle too, thanks for the tip! :) Hey, I already know over a dozen ways not to make a battery so I'll keep chugging away at it till I get it right! :) .

      @thewisemanwalks@thewisemanwalks8 жыл бұрын
    • Devina Danado how is it

      @shable1436@shable14366 жыл бұрын
  • Isn't this just chemical energy conversion. The ph of the material inside is stripping electrons off and the two differing metals creating a voltage differential, just like a lemon. What would be interesting would be to weigh everything, then run it got a year, then pull apart and check the weights again.

    @morlanius@morlanius9 жыл бұрын
    • *facepalm* 1: this is not a lot, 2: the process used in batteries uses chemical energy to produce ELECTRICAL energy. its a process, the way something is done, how things works. Oh bollocks, I'm not even going to try and educate you, you have the internet for fuck sake, go and learn something.

      @morlanius@morlanius9 жыл бұрын
    • ***** No, the electrolyte is solid, but amorphous, not a crystal. Who cares, anyhow? He built a primary battery, at high cost given the materials. Fun, interesting, educational; not "free energy".

      @jimvandamme@jimvandamme9 жыл бұрын
    • Pusalieth"Crystal" does not define molecular structure, it defines physical structure.These batteries do not last "forever" and they are corrosive. what do you think happens to that magnesium in there.These are very amenable for portable power! what he is using ,the copper and magnesium are the basis for Lithium polymer batteries used in thin leaf form sandwhitched together for extremely high power output , ie;used in models helicopters,electric cars etc etc.

      @psycronizer@psycronizer9 жыл бұрын
    • well, I can tell you the answer right now , with out having to wait a year or so. Providing the unit is sealed,to prevent any evaporation, the weight difference would be theoretically zero,since only electrons are moving through the circuit, from one pole to the other, its as simple as that.

      @psycronizer@psycronizer9 жыл бұрын
    • only assuming the the chemical conversion going on is 100% efficient and that no byproducts or gasses are even produced regardless of wether its sealed or not. You obviously didn't get what i was talking about. If what you are saying was correct then batteries would basically last forever. I'm talking about the process that liberates the electrons, this is a another route to creating a pH differential battery.

      @morlanius@morlanius9 жыл бұрын
  • first of all I love your work I've been watching your channel for years I am a big fan of yours I have a question or two? 1.are these crystals cells rechargeable if not, 2. do you think it is possible to create a cell like that that is rechargeable? 3. how fast can a crystal battery like you cooked to run out of Power with a regular small DC motor connected to it? and again thank you for all this great information you share with us ! we are truly grateful and keep up the good work you are truly a master of your domain

    @ben3583@ben358310 жыл бұрын
  • I did the exact measurments and mine didnt work well at all. The only thing I didnt do was grind the powders finer. Do you think that, that was the issue?

    @loraineprinsloo341@loraineprinsloo3417 ай бұрын
  • I havent seen him reply to even one post. what does that tell us!

    @blogtodeath4736@blogtodeath47368 жыл бұрын
  • You can drive an aluminum and a copper rod into your sewage tank and do the same thing.

    @jewelmock4946@jewelmock49465 жыл бұрын
    • is it really possible to obtain power that way? i have sizable amount of aluminum and copper .. im might have to try it.. any suggestion ,,, thanks..

      @juandelacruz1520@juandelacruz15204 жыл бұрын
  • if you are planning on making several of these, I would suggest using a stand mixer for your dry ingredients.

    @verigone2677@verigone2677 Жыл бұрын
  • is it possible to make crystal ice. where the energy gets traped at zero point like how john hutchison explain. when heating the crystals.

    @goodboy3481@goodboy34817 жыл бұрын
  • slow release chemical dry cell, kinda handy for WW3, disaster or a zombie apocalypse I guess, need more power than that though. And calling it a crystal cell is a little misleading.

    @morlanius@morlanius8 жыл бұрын
    • You my friend get an upvote.

      @matthewpiper171@matthewpiper1717 жыл бұрын
    • itz\s a borax crystal.

      @VBM1@VBM16 жыл бұрын
    • or kinda handy for a nice CLEAN PLANET

      @sebashtundakeng8683@sebashtundakeng86836 жыл бұрын
    • Morlanius , there is a stupid idiot curios to test the science heard from high school in last 3-4 years. he is playng same like young boys

      @UrgenthelpwithSubscriptionsHel@UrgenthelpwithSubscriptionsHel6 жыл бұрын
    • sounds like a reptilian phrase, Illuminati alert!

      @DrAskildsen@DrAskildsen5 жыл бұрын
  • Congratulations Mr. Luigi... you just reinvented the bimetallic galvanic battery!!! But I guess after 230years the patent must have expired!! LOL!!!

    @billysgeo@billysgeo7 жыл бұрын
  • would heating the dry mix to its molten state then pouring it into the cell your building be a viable alternative?

    @troymoore7537@troymoore75374 жыл бұрын
  • Is there any other metal I could use instead of magnesium cause its kind of difficult to buy large chunks of magnesium._.

    @acorgiwithacrown467@acorgiwithacrown4675 жыл бұрын
  • Just a normal copper magnesium galvanic cell battery. Nothing magic going on here

    @Doazic@Doazic10 жыл бұрын
    • Is it rechargeable, like with a solar panel?

      @normal_media@normal_media10 жыл бұрын
    • Floydd Pretty sure they aren't rechargeable

      @Doazic@Doazic10 жыл бұрын
    • Yes a very long lasting battery that's still worth making..

      @fidelcatsro6948@fidelcatsro694810 жыл бұрын
    • Floydd You don't need to charge them.. they last for years..

      @fidelcatsro6948@fidelcatsro694810 жыл бұрын
    • fidel catsro Can they be charge with a 220V output or 120V? And YOU CAN CHARGE THEM TOO!?!??! I'm going to make one just gotta know if its OK to charge with a 220V output!

      @Traindriver321@Traindriver32110 жыл бұрын
  • Kind of cool, but based on the title, I was thinking it would be a way of using crystal diodes to extract 'free' energy from the radio waves that are persistent all around us.

    @eventhisidistaken@eventhisidistaken9 жыл бұрын
    • That is what an old-fashioned crystal radio does. However, the amount of power produced by something like this is absolutely tiny and for this reason, almost completely useless in practice.

      @joshuarosen6242@joshuarosen62429 жыл бұрын
    • You are wrong Rosen ..... This coo e scaled UP to ANY level of POWER and will become an IMPORTANT PART of the FREE ENERGY MOVEMENT which wll TOPPLE and DESTROY the FOSSIL FUEL OILY BEAST 666 by a SWORD of LIGHT and TRUTH in the MESSIANIC AGE of AQUARIUS ... !!! AMEN ??? LOL

      @JohnEngLBJW777@JohnEngLBJW7779 жыл бұрын
    • U are correct T Qadaly ,,, I have tried it and it works beautfifully and it can be SCALED UP to whatever POWER levels needed and WILL help to TOPPLE and DESTROY the fossil fuel OILY BEAST 666 by SWORDS of TRUTH and LIGHT these HEAVENLY DEVICES produce in UNLIMITED amount forever !!!! AMEN ??? LOL !!!

      @JohnEngLBJW777@JohnEngLBJW7779 жыл бұрын
    • Pusalieth Photons don't lose energy per squared distance. You simply collect fewer of them per the square of distance.

      @eventhisidistaken@eventhisidistaken9 жыл бұрын
    • Pusalieth Photons don't decay. Photons and electrons, and their anti-particles, are the only stable particles. At any rate even if they are someday shown to decay (into what?), it would have nothing to do with losing energy per squared distance.

      @eventhisidistaken@eventhisidistaken9 жыл бұрын
  • This is a great video. But how about sharing a source list or where to buy the items needed to build it. I have no idea where to look for the magnesium cylinder you use or how much the parts cost. Yhanks.

    @garydepietro8952@garydepietro89529 жыл бұрын
  • very good I tried the penny battery and got about 12 volts .I also tried the bagdad battery ,in a very small version ,I have about a .7 volt and a little over 300 milliamp ,is this normal?

    @randywoodcox8189@randywoodcox818910 жыл бұрын
  • I've created at least a half dozen of these with lab quality 99.9%+ pure salts, cylinders were in 1" coper pipe, and had magnesium anodes. Sure, I was able to power a small (very small) motor for 3 weeks but it eventually died. Amperage and voltage fluctuated during the experiment but in the end all cells eventually died. This is not a breakthrough power cell technique or technology. Several months later the cells still have not regained enough amperage to power the motor again. They are effectively dead.Initial power output was between 200 and 300 milliamps and about 1.6 volts per cell. Just tested, now cells average around 1.2v and 20-70 milliamps.

    @warrenlove935@warrenlove9356 жыл бұрын
    • Thanks Warren. Finally someone with some actual data, and useful information.

      @solarfluxman8810@solarfluxman88105 жыл бұрын
    • id like to see this scaled up

      @graemejerome2815@graemejerome2815 Жыл бұрын
    • Try charging them back up

      @King_Crypto@King_Crypto9 күн бұрын
  • At 00:06, the voltage is measured. At 00:15, the current is measured . A voltmeter can't measure voltage and current without changing the probe connections! Seems like anothe hoax!

    @yveslegault6825@yveslegault68255 жыл бұрын
  • I need a hole room full of these. cool vid keep em coming

    @TheFarleyGordon@TheFarleyGordon10 жыл бұрын
  • I was just interested in where one might obtain some of those magnesium cores. The copper pipe caps are easy enough to find but, in regards to magnesium, I can't seem to find much more than anode rods and, unfortunately, the link provided doesn't actually link to a parts list but, instead, is a redirect to this youtube channel. Hope to hear from you soon. Thankz!

    @LogosNigrum@LogosNigrum3 жыл бұрын
    • Dude same, if you manage to find them please let me know🙏🙏

      @mateenessop1143@mateenessop11433 жыл бұрын
  • Why is this called a "crystal cell"? Its just a regular dissimilar metal cell like you'd buy in a store, only much more expensive and much less efficient. I mean its great as a demonstration of regular battery chemistry, but "crystals" dont really have anything to do with it.

    @htomerif@htomerif8 жыл бұрын
    • +htomerif Salt is a crystalline substance :P

      @LegalSkateboarding@LegalSkateboarding8 жыл бұрын
    • Legal Skateboarding not when its dissolved in water its not. I think this is the one where the guy uses some hydrated magnesium salts that release a crapton of water when even slightly heated.

      @htomerif@htomerif8 жыл бұрын
    • +htomerif nothing was dissolved in water

      @MrTurnermason@MrTurnermason7 жыл бұрын
    • mason turner Yes it was. They used magnesium chloride hydrate (or another hydrated magnesium salt). This usually has the formula MgCl(4H2O), containing much more water than magnesium salt. Even though it's a crystal, when you heat it the water is freed and is free to dissolve the other salts. From the other "crystal cells" I've seen, the cells form a dehydrated salt layer on top of the hydrated salts beneath which act as an electrolyte. Once this electrolyte becomes completely dehydrated, the cell stops functioning. Even though people don't know why what they're doing works and attribute it to "crystal magic", they're using hydrated salts to act as an electrolyte mixed with other salts to act as a protective layer, usually wrapping the whole thing in tape, further reducing water loss.

      @htomerif@htomerif7 жыл бұрын
    • Thanks for obnoxious comments. Very educational.

      @Traderhood@Traderhood7 жыл бұрын
  • Why don't you put a resistive load across the cell, depending on the value of the load in (Ohms), you can test the cells very quickly. Learn the basics of electricity!

    @petermay1219@petermay12199 жыл бұрын
  • can't wait to see the parts list

    @donleibold9693@donleibold969310 жыл бұрын
    • I just updated the parts list at: laserhacker.com/

      @lasersaber@lasersaber10 жыл бұрын
    • lasersaber its good to see a refined version ... i assume you watched all Fausto Heikkinen's video's, he has so many now it would be hard for a new comer to find the best version.

      @donleibold9693@donleibold969310 жыл бұрын
  • I love it. Thanks so much for the tutorial! I am going to send my Dad this link.

    @cheekysaver@cheekysaver10 жыл бұрын
KZhead