Screed from A to Z. Smooth floor. The subtleties of work. All stages.

Screed from A to Z. Smooth floor. The subtleties of work. All stages.
For a long time I promised to shoot in detail the process of pouring the screed from A to Z. And today I publish the promised video, where I will show in detail all the stages of work, I will share the subtleties of work that will help you avoid popular mistakes and make an even floor.
Music score Production Music courtesy of Epidemic Sound "www.epidemicsound.com
Friends of an electrician from Moscow - mrelektrik.ru/zamena-provodki...
Consider the Screed from A to Z in stages:
1. Cleaning and dusting with a vacuum cleaner. Do not neglect this stage, the screed will peel off from dust and debris. 0:50
2. Primer. This reduces the absorbency of the base, which is important for the screed. It is applied with a roller or spray gun. 1:09
3. Finding the highest point. The laser axial builder will come in very handy. We put the laser at a height of 1 m, then with a tape measure we pass throughout the room, so we find the highest point. 2:23
4 Damper tape (coastal). We mount with silicone or a pistol around the perimeter and go around all existing pipes. This subtlety will help compensate for linear expansion, improve noise insulation. 2:26.
5. Selection and layout of beacons. 3:18
6. Installation of beacons. The easiest option: we install beacons using a laser level and a square. 3:58.
7. The choice of material for the screed. One of the most important stages, because the quality of the screed directly depends on the quality of the material. None of the subtleties of work and experience will help if you choose a bad material. 5:09
8. Contact layer and screed filling. Apply the contact layer with a roller. We tighten the screed using a homemade vibrating screed. 6:38
9. Undercutting the screed. To get a flat floor as a result, we cut the screed until it has gained its strength. 9:00
10. Dismantling beacons or compensating for shrinkage with tile adhesive. 9:36
11. Care of the screed. 10:16
Write in the comments what other topics you want to see in the format from A to Z! Your opinion is interesting!
The book of comments and suggestions is in my social networks! Come on in! Comment! Subscribe! 👍
Share my videos on social networks - reposts, comments, likes - the best thanks to the author! Feedback is always pleasant, it means that I tried not in vain) 💪🎥
Professional repair and finishing in Minsk 📱 + 37529 523 71 43
Are you planning apartment renovation, house decoration - contact us!
Our construction group vk.com/profremontminsk Be sure to Join! 💡
VK vk.com/id9894090
Facebook / pavel.sidorik
================================================== ====
I will highlight my Instagram in a separate line ☝
Come in, see, subscribe, I undertake to post news!
/ pavel.sidorik
================================================== ====
Watch other videos on the floor screed.
The subtleties of working with a screed. A common mistake in a panel house. The choice of material.
• Тонкости работы со стя...
Vibrating screed with your own hands. The subtleties of working with a screed.
• Рабочие хитрости. Вибр...
Thin-layer screed. The subtleties of working with a screed. Possible mistakes.
• Тонкости работы со стя...
The subtleties of working with a floor screed. Helpful hints.
• Тонкости работы со стя...
#screed #repair #finish #floor repair #floor screed #holcim # holsim #how to make a screed # screed work # warm floor # sand concrete # rough finishing # smooth floor