1 TowMan 2 skates and a snatch block
In this video I am using skates and a snatch block to load a 2018 Audi A6 onto the bed. The vehicle has power but not getting power to the inside. The key fobs aren't working and nothing inside works. The transmission was stuck in park and the electronic parking brake was stuck on. Using the shift lock override allows me to put the vehicle into neutral so the front wheels can roll and not drag it. The skates allow me to pull the vehicles rear wheels while the front wheels roll. Go checkout @baremation for your towing supplies. www.baremotion.com/
DISCLAIMER
Do not attempt any of these techniques unless you are an experienced Tow Truck Operator and/or Auto Mechanic. Utilize all necessary safety precautions when employing these techniques. The producer of this video assumes no responsibility or liability for the misuse of this information with respect to property damage and/or personal injury of any kind. This disclaimer applies to every and any video produced and published by TowMan127 Checkout more of my videos. Links below.
Square body pick up goes over the embankment
• SQUARE BODY WENT OVER ...
Beginner how I tow a vehicle with a rollback
• HOW I LOAD, SECURE, TO...
Loading a motorcycle by myself
• Loading and offloading...
Dangerous fog leads to a winch out
• Dangerous fog leads to...
Towing a mini Cooper without keys
• NO KEYS NEEDED! MINI C...
U-turn gone wrong pick and swing
• WHEN A U TURN GOES WRONG
Enclosed trailer wheel almost fall off
• TRAILER WHEEL ALMOST F...
U-Haul VS bank drive-thru
• U-Haul VS Bank drive-thru
And those skates can be holy grails! I used to use them for more things than youd expect, if I had a low car I would even tuck it under the bumper to keep from scraping the bumper, or a low exhaust, really anything that I didnt want scratching
I love my skates!!! I flip them over and put a 4x4x36 in front of them and use it like ramps. Works perfect!
Never thought about the bumper. These folks up here love their WRX's. That will make it so much easier. 🤘
Smart. Thank you so much
@@connoisseuroftigolbitts it helps to put them under like anything that shouldn’t rub they’re my favorite device
@@jennadeknight9056 yes thank you so much I learn something new everyday
Ohhhhh why didn’t I watch this before I ordered my truck . That remote makes life soooo much simpler and easier
Morning! Yes the remote is awesome! It is definitely an option to order when ordering a truck. It’s like having an extra person helping you. You can always add it on.
Between the overide and the j-hook spots I just learned two new things. This is why you have 13m subs. your one of the best dam teachers out there in Towland. Thank you!
I wish I had 13 million subs. 😂 glad the videos help! Thank you so much for the compliment, I appreciate your support! 🤜🤛
From one tow driver to another, thank you for this education video, I am always up for learning new things, be safe out there bro and god speed!
Thanks for watching and you’re welcome. You be safe as well. God bless!
Honestly you made this tow harder than it should have been. You should have started with the snatch block. Question, if you put the car in neutral why then put the skates on the back tires?
I put it in neutral and used the skates on the rear tire cause the parking brake was stuck on
I was thinking the same thing over working his self also
Audi's are front wheel drive based so that's why he didn't need them under the front wheels. E-Brakes go to the rear wheels and that vehicle had an electronic one, don't want the tires scraping that far across the asphalt because they lock the wheels up like nobody's business. Is there a different method you would have done with the given information? I love learning new things man so don't take it the wrong way 🙏
@@TowMan127 but you were able to put it in neutral. Could you explain? I just started flatbed towing. But I have pretty good ideas on the concepts. I had a similar situation with a Range Rover but I didn't use skates and there was no key and I tried looking for the shift lock but couldn't find it. It was my 2nd flatbed tow ever.
@@Kama.Boy.13 I was able to get the vehicle into neutral which will allow the front wheels to roll when I winch it. The skates are used on the rear wheels cause the parking brake is electronic and they were stuck on. Most range rovers have a neutral override. Some are by the shifter, under the cup holder, under the engine cover, or on the transmission itself.
Well done....I wish skates would slide that good on my aluminum bed.. it's got traction ribs & skates catch. I'm diggin' that green snatch block.. matches my truck.... lol
@@MegaRambo456 Definitely not... You don't want grease on the bed... 100% no
Get an old set of license plates and put them under the skates when going up the bed and they should slide. I personally don’t like putting any slippery stuff on my bed.
@@woody4u247 To be specific not grease but a sort of lubricant that don't stick and you don't spray on the bed just underneath the skates.
Just wanted to stop by and say thank you for the shift lock videos. Repo man here, if i ever have a brain block or just dont know i look up your vids. Thanks man. Keep it up.
You’re welcome! Glad the videos help. Thanks for the support and be safe out there.
Thank you for your hard work in helping people in need of your services! And thank you for this educational video, be safe out there!!
🙏🙏 I’ll be making more videos of how I do stuff. There are many ways of doing stuff but I will show how I do it and hope the videos help out tow operators who are new to the industry.
@@TowMan127 thank you for your work!!
@@jennadeknight9056 you’re welcome 🤜🤛
Let me tell you this guy has skills that's a low car loaded from the back. He knows how to use his equipment and make it look easy. Well done
Thanks! 🤜🤛
I dunno i just started 3 weeks ago never touched a tow truck before , been doing good with it except no skates just drag er on up
good stuff brother you have saved me more time and headache over the past wow many years with your shiftlock videos and now with the skates I have been struggling with skates for years when offloading a vehicle the skates were always stuck under the tires I would have to beat them out with the hammer so when I seen you use the bed trick you did to remove the skates that was very helpful thanks brother be safe out there.
Thanks! Glad the videos are helpful. Skates are great but can be a PIA sometimes. I always try to share what works for me in hopes that it will help others. I have a video of myself offloading a 2024 Toyota Tundra with the parking brake stuck on. Video should be up soon. Be safe out there.
Thank you brother I started towing this week and this has came in handy dandy like the screwdriver😂
Why do we put the skates in the back tires again?
@@JonathanValdez92 parking brake was locked
@@TowMan127 thank you 🫡
@@JonathanValdez92 you’re welcome
I was taught to push the wheel lift down to bring tail up to give more clearance, also so tail of deck doesn't drag ground, and to support the end of the bed rails when sliding in and out, especially since my truck is bagged. Well done sir, very professional. This is why people should subscribe to this channel
Everyone is taught differently. My truck was bagged as well. I don’t use the wheel lift for loading and unloading unless it’s a heavy machine or ambulance. When you have the proper tools, it makes your job so much easier. I try to not abuse the equipment as much as possible. A couple of skates, pieces of wood, snatch blocks, and a wheel chock or 2 are great to have.
@@TowMan127 I don't abuse mine either. Proper tools are key
@@markroadkillrecovery1168 yeah for sure and the truck lasts longer.
Dude I love your videos! You are always super slick.
Glad you do!!! Thanks for the support. More video coming soon. 🤜🤛
Love how you educate in your videos 🥰
I try to explain what I’m doing so it helps others.
Brother I do believe you are the Hardest working man in the Business. The young kids coming up can learn a lot from you. Have a great and safe weekend my friend 👊👊👊👊😎😎😎👍👍🤠
Thanks brother! I give it my best. Hope all is well. 🤜🤛
Just started doing this job in the UK and this is an excellent example of how to use the snatch block!
👍🤜🤛. If you ever have any questions, just leave me a comment and I can help you out.
@@TowMan127 thanks
@@chrismurray3198 you’re welcome
Nice 1 brother! Make it look like a piece of cake. Thanks for the video
You’re welcome 🤜🤛
A new subscriber here... I enjoyed the lesson, thanks.
Thanks for watching and subscribing!!! 🤜🤛
Glad I work for myself now 😊 keep it up brother
🤜🤛
Towing is in my blood but over 20 years I realized I need to do it on my own terms 💯
@@jker5327 i definitely understand that!
Good job . Only thing I usually put my remote around my neck when I hop out.
I hate having anything around my neck which is why I don’t use it that way unless I have to.
Get it bro bro! 🪝💪
🤜🤛
I miss towing, but I don't miss the 20 dollar flat rate and hour long drives between each tow!!!!
Brand new subscriber from Maine. A friend put me onto your channel because he found your vid on putting a BMW 328xi in neutral. My steering wheel is locked and 2 tow companies that came, AAA, couldn't move it. I knew there is a way to put it in neutral, to guys had no clue. I figure if we get it in neutral and in line with the roll back, they can drag it up. The front wheels are almost straight. They are just lazy I guess.
Thanks for subscribing! Some guys just don’t know. 🤜🤛
always love skates- you did also have enough room to back truck up to back of the car and wedge the bed under the skates- pulls easier :)
Yes, I had plenty of room to back directly up to the vehicle but the problem is the vehicle is in the driveway which slopes downward which would cause the rear of the vehicle to scrape the bed and the front wood scrape against the driveway.
Electric e brakes are the stupidest invention. I never use them and tell customers to stop using them
Yeah they suck! Always issues with them.
Yeah some of them set automatically. When the vehicle has power you can take the brakes off and if not just use skates.
Park + E brake is what i do just for extra safety
Any good straps to recommends?? I have Vulcan brands and they gets loose all the time. Thanks!!!
I buy all my straps from www.baremotion.com All of the straps I buy are diamond weave material that is thicker and stronger webbing. You can checkout my recommended straps here www.baremotion.com/collections/towman127?syclid=ckdebuh2c1es73boridg&
Good job Bro ;-)
Thanks! 🤜🤛
Hi great video can i ask why you used the slippery skates when the car rolled and you put in neutral? Bit confused
The parking brakes were stuck on. Putting it in neutral and using the skates on the rear wheels allows me to drag the vehicle without dragging the whole vehicle.
How about (Oodles of Noodles Foam Pool Swim Noodles, ) for the winch so you don’t really need to step on the bumper!! What are you think 💭??
It’s funny that you mention that because I actually have pool noodles that I normally use but forgot to use it on this video. I always use them on classics or low vehicles.
Hammer looks good to me!👍
I haven’t had any issues with it but there are people that do complain.
People that aren't doing it🤣
@@philiprosenstock9667 😂
Why not use the gojacks until u get it lined right up to the bed then drag it up
I bought a Audi VW electronic brake release tool from auto zone for 85 bucks. Also Ceasar is this standing on the line thing something you still do?
I don’t always stand on the line 😂 I was rushing that day and I forgot I had a pool noodle in the box to put over the line. Didn’t know they had a brake release tool for them.
@@TowMan127 I left the link below
Can you take a picture or a video of where the front tire is when you are unloading it? Thank you!
I will try and get a photo to show or a video. Whichever comes first.
Why did you use the scates to unload if you had the keys?
Parking brake was stuck
Hey where did u get the green attachment ? For the wire
You can buy them online. It’s called a snatch block. Here’s one on Amazon amzn.to/3PzVvvz
Make it look so easy idk why last night iwas pulling a rwd same way bmw but kept going to the left side maybe ididnt place them all the way under the wheel?
I try to place the skate all the way under the tire but sometimes a vehicle will shift. Sometimes I’ll have to use a snatch block multiple times cause the car wants to go to the side and it’s annoying. Sometimes you can in hook one side to straighten it out as well
What kind of body cam you wear?
In this video I was using a GoPro on a head mount I upgraded to a DJI Osmo 3. Way better camera.
Hi! How can i order supplies in Europe? On the website only let me choose US for delivery. Ty for the help and keep up the well done jobs!
I will ask the lady from Baremotion.
You can email them what you need but freight is expensive. Their email is Sales@baremotion.com you can use coupon code TOWMAN127
@@TowMan127 thank you very much 🙏🏽
@@mychannelromania2838 you’re welcome
POV 👌
Please how do you called those lemon green small wheels chocks ?
Skates
Use double skids under each wheel it will make it easier to skid. Other than that, keep up the great work.
If you get the skate under the tire all the way, they’ll work fine. Wife skates are great for the wide tires. 🤜🤛
What camera are you using?
GoPro hero 7
I got to say I love your videos but a few things why not just use the wrecker grab the back slap dollies and be out? Why not use a sling through the rim pull it sideways and then drag it straight up the deck? But the biggest one why would you ever stand on a winch line or let anyone drive over it I've seen what happens when a line breaks I've seen it get caught on a car driving over it I mean no disrespect and I'm not trying to bash you but there's so many senseless death and injury in our jobs that we can't avoid but standing on a winch line or letting someone drive over it these are things we can avoid
Never mind u don't have any gojacks. I'd advise gettin a pair of em
I have a pair and they're ok for some things but they don't like to come on to the deck, that's where skates do it well
Thia is why i hate flatbeds for most jobs other than bad wrecks and long distance tows. I would have had that audi on the road in a fraction of the time in my auto loader
Dumb parking brake was stuck on.
I actually like more that hammer 🔨 then the other one
It works fine for me and I haven’t had any issues with it but some people say with the hammer I was using it can break the skate.
Why you still need plate you got the car in neutral.
Parking brake was stuck on
Привет из России! Подписка одназначно!
👋 Thanks for subscribing!
Electric shifters and parking brakes are so dumb. Makes our jobs harder than what it has to be at times.
The shifters I don’t mind cause a lot of them have overrides. The electronic parking brakes are what I don’t like.
Keep half a pool noodle in the truck to put on the winch cable to keep from. Damaging bumper
I actually had a noodle in the toolbox just forgot about it.
Should have requested wheel lift and dollies, Why didn't 85 do it?
Not sure. I have dollie’s as well but most of the time when I get to the dealership they want it in specific spots and it’s easier to offload it from the bed into a spot cause they don’t have a lot of room and tight turns at the dealership.
Am sure that after a year if he was in the same situation he would do it so different now.... I never put the car in neutral when using snatchblock!!
I’d do it the same way every time. The reason I put it in neutral is to allow the front wheels to roll amd not drag. The parking brake was stuck on which is why I used skates on the rear wheels. Putting the vehicle in neutral makes it easier than dragging it in park.
@TowMan127 facts I'd rather drag the brake over transmission any day but never drag if possible
I really think I can do this for a living
You can ride along with someone and see if you like it.
Yeah I’d definitely recommend finding someone who knows what they’re doing.
If you wer able to put it in neutral why dont just push it out and load it straight up???
Parking brakes were stuck on.
Why use skates if you can get it in neutral?
Oh shit I didn't realize it has an electric e brake, my bad
Jeeps are the worst w that
I hate electronic parking brakes
Why did you even use the skates if the car rolled by itself?
Never mind question was answered
Why didn't u have cones out so ppl would know u were working and for ur safety?
Didn’t need it at that location.
Con respecto no se me hace práctico lo que hizo si lo puede dejar en neutro y no se bloquea la dirección lo hubiera dejado recto y hubiera sido más fácil y más rapido
The parking brake was stuck on and I had to drag it out of the driveway to load it. If I would’ve loaded it from the driveway, I would have scraped the whole front bumper on the ground. I already had the transmission in neutral but the parking brake was stuck on and wouldn’t come off.
That’s when a pool noodle comes in instead of standing on your wire rope just throw a pool noodle over it
I had one but forgot to use it cause I was rushing. I always keep noodles on the truck.
@@TowMan127 You did a good job on that load man. I’m glad people are putting out content like this it can really help new operators. I know when I first started out in training I never encountered any non normal situations everything I learned I basically had to learn on my own over time.
@@derek2601 it was the same for me in the beginning. I had to learn as I went along. 22 years later I’m still learning but I try to help other operators out. 🤜🤛
I guess everyone does it differently but could of been done easier good job tho still got it done
Maybe ways to get the job done. As long as it gets done without any damages, it’s a success.