KZhead
Тәжірибелік нұсқаулар және стиль

⚖ PENDULUM Art 101 | How to create Pendulum SWING & the 🎨Paint Consistency | Acrylic Pouring Art✨

Rhonda's Tri-RRR-tistry
2020 ж. 17 Қаз.
27 107 Рет қаралды
Жүктеу

In this video, I show how I created my Pendulum Swing and the Formula I use for my Paint Consistency. I have adjusted my swing using carabiners instead of wires in some places.
Hope you enjoy the video. Let me know what you use for your pendulum.
Bye for now!
Rhonda
MATERIALS USED
Colors:
NA
Medium:
Liquitex Pouring Medium and Water
Consistency:
1-part Paint - 2 oz
1-part Water - 2 oz
2-parts Liquitex Pouring Medium - 4 oz
Thin - continuous flow off stick…very slight mound on top of the surfaces of pain as it flows off my mixing stick only an inch off the surface of the paint
Silicone:
NA
SEE MORE of my work? Check out...
Facebook Page: / tri.rrr.tistry
Instagram: / tri.rrr.tistry
Website: www.tri-rrr-tistry.com/
I appreciate you watching and experiencing art with me! Have a GREAT day…and we will see you next time!
Bye...for NOW!
Rhonda R Robson
Fluid Artist
INTRO:
Kyle Hansen
Music: Last Summer by Ikson: / ikson Music promoted by Audio Library • Last Summer - Ikson (N...
MUSIC:
Wiljan & Xandra - Woodlands
KZhead • Wiljan & Xandra - Wood...
Wiljan • / wiljanmusic
Xandra • / xandraamusic • / xandraamusic
SUPPORT Tri-RRR-tistry:
Thank you for watching and encouraging me! If you are interested in helping me to continue to create instructional videos like these please consider supporting me through paypal.me/Rhondastrirrrtistry
COMMISSION ART:
I create personalized pieces of art! You choose everything…from the size of the canvas, style, and color, and I will create something special just for you. If you’re interested in a one of a kind piece of art made just for you, or as a gift, please contact me at tri.rrr.tistry@gmail.com.
OTHER ARTIST who have inspired me:
Olga Soby: Smart Art Materials: / @olgasoby
Molly’s Artistry: / @mollysartistry
Rinske Douna: / @rinskedouna
Mina Villegas Art: / @minavillegasart
Pouring your Heart Out with Julie Cutts: / @pouringyourheartout
#FluidArt #AcrylicPouring #PouringArt #TriRRRtistry #RhondaRRobson

Пікірлер

  • I am loving this technique and the helpful hints you have making it easier for us ty really appreciate it.

    @reneeharrington3599@reneeharrington35992 жыл бұрын

    • You are so welcome! Thanks for letting me know!!! Have a GREAT day!

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • Wow! I had wondered how this could be done. This is beautiful and to show it in a different angle and to show how you use the fish hooks!! Love it thanks so much. Now I have to see more!! Thank you

    @juanita920@juanita9202 жыл бұрын

    • Thank you!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • Great video! The ankle weight is genius. Thanks so much!!! 🌟

    @cherylsanders2753@cherylsanders27532 жыл бұрын

    • Thank you!!! I like finding things around the house. 😜

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • Genius holder. Thank for sharing. These are always special paintings!

    @karylgammon8760@karylgammon876011 ай бұрын

    • Thanks!

      @RhondasTriRRRtistry@RhondasTriRRRtistry11 ай бұрын

  • Hi! You came up on my timeline- subscribed. I home-school, & do Art Therapy with my 8yr old who has a terminal heart condition. He's going to just love this! Huge appreciation from us both for the tutorial!

    @mumo9413@mumo94132 жыл бұрын

    • Amazing!!! Have fun and you are welcome!!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • IS BEAUTIFUL,MAGNIFIC,ADORABLE,KINETIC ART,

    @aldostorey8121@aldostorey81213 жыл бұрын

    • Thank you so very much!!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry3 жыл бұрын

  • So cool!

    @tracybrusman9538@tracybrusman95383 жыл бұрын

    • Thanks!

      @RhondasTriRRRtistry@RhondasTriRRRtistry3 жыл бұрын

  • Hahaha! “Who smiles when they hear that sound?” I have to admit I did.

    @tomcowsert8962@tomcowsert89622 жыл бұрын

  • Wow. Fsntastic

    @OakbyBetina@OakbyBetina Жыл бұрын

    • Thanks!

      @RhondasTriRRRtistry@RhondasTriRRRtistry Жыл бұрын

  • Bravissima!!! Grazie

    @laurafrancesconi7087@laurafrancesconi70872 жыл бұрын

    • Thank you!!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • I so want to try this but I am afraid..Thank you for the tutorial, I am maybe feeling a bit more confident.

    @lorirutherford390@lorirutherford3903 жыл бұрын

    • GREAT!!! Good luck and let me know if you do!

      @RhondasTriRRRtistry@RhondasTriRRRtistry3 жыл бұрын

  • Thank you!!

    @lauriecassada4787@lauriecassada47873 жыл бұрын

    • You're welcome! Thank you!

      @RhondasTriRRRtistry@RhondasTriRRRtistry3 жыл бұрын

  • I enjoy watching your videos. I was wondering how much wait do you use on your cups?

    @feliciachild8804@feliciachild88049 ай бұрын

    • It’s about a point. You don’t need much just something so it doesn’t fly everywhere.

      @RhondasTriRRRtistry@RhondasTriRRRtistry9 ай бұрын

  • Great tutorial. Any idea what size drill bit you are using for the holes in the cups?

    @kimberlee17@kimberlee172 жыл бұрын

    • I’ll check to see if I have that and get back to you. Thanks so much

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • How do you cover the canvas with the base paint so we’ll without it showing through, it seems like it’s taking me numerous coats and it still shows. And what kind of paint do you use for the base

    @feliciachild8804@feliciachild88049 ай бұрын

    • There are different levels of opaqueness and even translucency in paint. So some paint depending on the level of transparency or opaqueness could show the canvas or other pain through layers of paint. An easy place to look to see is in the tube or jar of paint. Some will have a a box or a “+” sign. Let me know what you see and I can help guid you or you can google what it means on line. 😃 let me know if you have any other questions!

      @RhondasTriRRRtistry@RhondasTriRRRtistry9 ай бұрын

  • Thank you so much for this great, informative video. I learned so much. I do have one question. What size drill bit did you use? Thank you!

    @Vsv1224@Vsv122410 ай бұрын

    • It was an 1/8 of an inch but it all depends on how thin your paint is. It could be thicker and use a thicker hole. I would practice before you use it.

      @RhondasTriRRRtistry@RhondasTriRRRtistry10 ай бұрын

    • Thank you!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry10 ай бұрын

    • @@RhondasTriRRRtistry rest assured I will practice, both with and without paint. I appreciate all your help!

      @Vsv1224@Vsv122410 ай бұрын

  • Вау!

    @nataschulkalazorenko642@nataschulkalazorenko64210 ай бұрын

    • 😃

      @RhondasTriRRRtistry@RhondasTriRRRtistry10 ай бұрын

  • That's awesome.... Which is the distance between cup and the canvas?

    @edwin_art_studio414@edwin_art_studio414 Жыл бұрын

    • Thank you!!!! It was only about three to four inches is all or about 7.5 - 10 Ccm. Thanks for watching and asking!

      @RhondasTriRRRtistry@RhondasTriRRRtistry Жыл бұрын

  • Just saw this video, 7/15/21, Going right out to buy an ankle weight ,,,,Thank You.

    @jimbruce3923@jimbruce39232 жыл бұрын

    • Have fun! It works GREAT!

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • Rhonda I need some guidance. After watching your video I have been trying(unsuccessfully) to create one. The issue I'm having is although I get a steady stream the paint comes out blochy no matter how thin or thick the paint is. I am using a ketchup/condiment bottle I bought from Walmart inverted and cut in half and in a leg weight swing like the one you use. Do u have any suggestions?

    @nathanalarcon4394@nathanalarcon4394 Жыл бұрын

    • Do you have an "air hole/open area" when you turn the bottle upside down? The paint needs the help of air to push it down in a steady stream. Think about when you sip on a bottle of water or your favorite beverage. If you complely inicirle the area the beverage is coming out with your mouth, it comes out slower but if you have a space above your mouth where the bottle has air when drinking the beverage it flows faster in a more steady stream. Im not sure I am explaing this very well...so here is an example from my college days...maybe you might have seen when people poke a hole in the side at the bottom of a can...let's say a beer can...then when they put that up to their mouth and then pop the top of the can, they can drink it very fast. 😁 If you do have airflow from above the paint once you tip it for the pendulem and it sill isn't working...let me know and I can help more.

      @RhondasTriRRRtistry@RhondasTriRRRtistry Жыл бұрын

  • What size of drill bit did you use? Thank you for step by step. I want to try this method

    @patsyhune6329@patsyhune6329 Жыл бұрын

    • I can’t remember. Sorry! It’s been such a long time since I did it but I just used it again the other day so I’ll check. Thanks

      @RhondasTriRRRtistry@RhondasTriRRRtistry Жыл бұрын

  • Rhonda cut a hole into the other end of bottle to get it to flow

    @patsyhune6329@patsyhune6329 Жыл бұрын

    • Thanks!

      @RhondasTriRRRtistry@RhondasTriRRRtistry Жыл бұрын

  • If you heat up the end of the drill bit before you start drilling , you might not crack the cup? Also, if you set the cup down like your going to fill it and drill the bottom from the inside, you might have better luck! Just make sure you put the cup on a piece of scrap wood or something!

    @cliffordharley4322@cliffordharley43223 ай бұрын

    • Thank you!!!! Great point.

      @RhondasTriRRRtistry@RhondasTriRRRtistry3 ай бұрын

    • @@RhondasTriRRRtistry Thank you for sharing!

      @cliffordharley4322@cliffordharley43223 ай бұрын

  • A hot soldering iron makes PERFECT holes in plastic!!!

    @christylane1976@christylane19763 жыл бұрын

    • That is so true. Didn’t think of that! I probably wouldn’t have cracked so many cups! Ha ha!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry3 жыл бұрын

  • I love your work, I wish your camera was closer to see better

    @feliciachild8804@feliciachild880410 ай бұрын

    • I learned a lot about camera angles on this one. Thanks for the feedback!

      @RhondasTriRRRtistry@RhondasTriRRRtistry10 ай бұрын

  • What size drill bit did you use?

    @tomcowsert8962@tomcowsert89622 жыл бұрын

    • I’m not sure it was pretty small but let me take a look and get back to you. Thanks.

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • como se hace para que dure tnto la inèrcia? A mi no me sale...

    @mariangelbeltranmessa7003@mariangelbeltranmessa7003 Жыл бұрын

    • I think it has to do with the how it is connected above and how ling the string is.

      @RhondasTriRRRtistry@RhondasTriRRRtistry Жыл бұрын

  • It looks so easy when you do it but something tells me deep down inside that there must be a secret somewhere. It cannot be that easy!

    @aucomint@aucomint Жыл бұрын

    • I will admit I tested a few times before I got the hang of it.

      @RhondasTriRRRtistry@RhondasTriRRRtistry Жыл бұрын

  • Place a small canvas on the edge to do something else as well...

    @charlesdaniel2313@charlesdaniel231311 ай бұрын

    • I love that idea…🤦🏼‍♀️why didn’t I think of that. LOL!!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry11 ай бұрын

  • Next time put 3 or 4 cup together then drill hole gives bottom support and won’t crack any of them

    @fredsones9478@fredsones94782 жыл бұрын

    • Great idea thanks!!!

      @RhondasTriRRRtistry@RhondasTriRRRtistry2 жыл бұрын

  • What was the paint in the bigger container?

    @timtonicki9115@timtonicki9115Ай бұрын

    • I used it to catch my pendulum with. I didn’t use anything from that container. Unless I mistaken of what you saw. Just let me know.

      @RhondasTriRRRtistry@RhondasTriRRRtistryАй бұрын

    • I think you may be asking about the liquitex in the big container and that is a pouring medium not paint its what you mix with paint

      @danielle3901@danielle390124 күн бұрын

    • Thanks!

      @RhondasTriRRRtistry@RhondasTriRRRtistry4 күн бұрын

  • Melt hole..

    @charlesdaniel2313@charlesdaniel231311 ай бұрын

    • I did think of that as well. With a soldering iron. Next time. 😃

      @RhondasTriRRRtistry@RhondasTriRRRtistry11 ай бұрын
KZhead