KZhead
Тәжірибелік нұсқаулар және стиль

Woodturning - Maple with sumac branches in brass shavings.

Sprague Woodturning
2020 ж. 26 Мау.
105 203 Рет қаралды
Жүктеу

In this video, I take a bowl that most woodturners would through in the trash and turn it into a family heirloom. As always please follow all safety precautions and always wear a face shield!
Starbond Adhesives: USE CODE: INLAYJIM for 10% OFF
www.starbond.com/
Sandpaper.ca USE CODE: INLAYJIM for 10% OFF
sandpaper.ca/
Instagram
instagram.com/?hl=en
Facebook
/ spraguewoodturning
Website
www.spraguewoodturning.ca/
Email
spraguewoodturning@gmail.com
If you want to send something me, send it to:
Sprague Woodturning
652 Rantz Rd
Petawawa, ON Canada
K8H 2W8
This video is for entertainment purposes, please read and follow all safety precautions with all your equipment!
American Amazon Subscribers use links below
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/34EdCJP
Timber check moisture meter
amzn.to/2Jn0XTt
Scotch Brite Hand Pads
amzn.to/34Foffq
Wood Bowl Finish
amzn.to/3mBT1Mj
0000 Steel wool
amzn.to/3e8lcQa
Soapstone carving blocks
amzn.to/37TYief
Pen I use, Pilot V5 0.5mm tip, Black
amzn.to/3mGBRgv
¾” spindle roughing gouge
amzn.to/3eeycUu
UC Coatings End Grain Sealer
amzn.to/3eb9jJ3
Easy Wood Tools Full Size Finisher
amzn.to/2HO8Ssx
Pressure Pot for Casting by California Air Tools
amzn.to/31Xm0T2
Canadian Amazon Subscribers use links below
Crown Pro Turning Parting Tool
amzn.to/3mCIEIo
Wood Bowl Finish
amzn.to/34DZ1Ox
0000 Steel wool
amzn.to/3jBfEyI
Soapstone carving blocks
amzn.to/3kJPX03
Pen I use, Pilot V5 0.5mm tip, Black (you can select the quantity when you get there)
amzn.to/3kUtU6U
Easy Wood Tools Full Size Finisher
amzn.to/3myOAC0
Pressure Pot for Casting by California Air Tools
amzn.to/2TCY9n5
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/3oINYvF
Timber check moisture meter
amzn.to/34GJs8V
Scotch Brite Hand Pads
amzn.to/2TFnqNy
As an Amazon Associate, I earn a small commission from qualifying purchases. By purchasing from the links above, you are supporting this channel so I can bring great content every week! Thanks!
Ellsworth Signature Bowl Gouge
www.leevalley.com/en-ca/shop/...
Typhoon Carving Burrs
www.leevalley.com/en-ca/shop/...
Sculpture Supply Carving Stones
www.sculpturesupply.com/list....
Sculpture Supply Lead Free Pewter
www.sculpturesupply.com/detai...
Oneway Manufacturing Easy Coring System
oneway.ca/index.php?route=pro...
Saltmill Mechanisms
woodchuckers.com/products/cs-...
Peppermill Mechanisms
woodchuckers.com/products/che...
R&D Bandsaw Blades
tufftooth.com/product-categor...
Oneway Vacuum Chucking System
oneway.ca/products-category/c...
Combination Skew Chisel and Gouge
www.leevalley.com/en-ca/shop/...

Пікірлер

  • Viewers can learn so much more from you than woodturning. I once had a teacher when I was in college who told us that if we learned everything about one thing, we’d learn all there is to know. I can’t thank you enough.

    @marynull4831@marynull483110 ай бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning10 ай бұрын

  • Hi, I don't do woodwook myself. But I love watching the way you can take a piece of wood and turn it into something so fantastic. You are amazing.

    @JayJones-bp4xl@JayJones-bp4xl Жыл бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • That black makes the bowl pop! And the inlay is outstanding.

    @cathuggerniowacity@cathuggerniowacity2 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Jim, you knoted it out the park, looking at what you started with and to the end,man your a wood Ninja love your work brother !!!!

    @bmankelly872@bmankelly8722 жыл бұрын

    • Thanks 🥷🏻 lol 🙏🏻

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Shinny is my choice and I love the way it brings the bowl alive. Makes it like satin .

    @margaretwilliams5281@margaretwilliams5281 Жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • This bowl shines like a wooden diamond 💎

    @amandathurston2720@amandathurston27202 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • I just love this piece!! Just plain old wood.

    @pattybeeler9003@pattybeeler900311 ай бұрын

    • Sure is, lol. Thanks for watching!

      @SpragueWoodturning@SpragueWoodturning11 ай бұрын

  • burning the rim just looks so amazing and the result is just astonishingly beautiful

    @lokibottleoff9550@lokibottleoff95502 жыл бұрын

    • Thanks!

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • What a beautiful bowl with a really nice inlay and a burnt edge it's cool. The wood is really lovely it's got some nice grain and the finish is awesome well done Jim. Amanda x

    @amandatallis9875@amandatallis9875 Жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • The burnt edge frames the bowl, making the maple pop. Such a neat idea and beautiful piece

    @andreakernohan5299@andreakernohan5299 Жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Nice piece. I can’t make a fire no more as all my scraps need to be made into something. Thanks for sharing your knowledge and techniques.

    @salchiarelli8998@salchiarelli89982 жыл бұрын

    • Thanks for watching!

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • It’s really interesting to be starting out watching your latest resin bowls, and now going back to your inlay “roots” to see where you came from. Love this burned edge! I’ve never even heard of doing that before, and the effect is fabulous! Very cool!

    @MaxPaws@MaxPaws Жыл бұрын

    • Thanks for watching!

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Look at the beauty this bowl has that you use natural material and natural techniques to make it

    @melissataylor5977@melissataylor59772 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • I have to laugh at myself. I find that I hold my breath when you spray the accelerator so that I don't inhale the fumes!

    @gakilb@gakilb Жыл бұрын

    • Lol, thanks for watching

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • ONCE AGAIN YOU GOT ME WITH YOUR WORKMEN SHIP. FELL IN LOVE WITH THIS ITEM AND ONCE AGAIN I DO NOT KNOW HOW TO PURCHASE ANY OF THE THING YOU MAKE BUT YOU ARE GREAT AND THEY ARE LOVELY. THANK FOR THE SHOW

    @joycespencer2851@joycespencer28512 жыл бұрын

    • Thanks for watching, and I sent you an email, Jim

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • U have an eye for art and a skill for it too. 👍👍👍👍👍

    @louisleo7449@louisleo74493 жыл бұрын

    • Thanks!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • I love the resin projects. One of the reasons I first started watching. But damned if this isn't awesome!

    @FormulaZR@FormulaZR2 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • I was skeptical about the burnt edge but came out amazing as usual. Such a lovely piece!

    @mariverhagen8082@mariverhagen8082 Жыл бұрын

    • Thank you very much

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Gorgeous bowl. I like the brass and branches inlay. Classy looking

    @judithfairchild8620@judithfairchild86202 жыл бұрын

    • Thanks Judith!

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Interesting and beautiful piece from your pre-resin days. I enjoy going back through some of your older work.

    @lesliebrown1517@lesliebrown15175 ай бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning5 ай бұрын

  • Jim, I couldn't bare to see salad tossed in that beautiful work of SpagueArt. It's an offence deserving of "hot" tar and feathering! Hell yeah you should sign your work! All true Artists do. As always, thanks for letting me and all of us visit you and your shop. Hey, don't vacuum up that shop floor. It's what makes me feel right at home! ;-)) Wakodahatchee Chris

    @cdrive5757@cdrive57573 жыл бұрын

    • Lol, thanks. I prefer to make food safe items, but in reality they probably never see food! Jim

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Hi. Just a Word to say how much I learn and get inspired by your videos. Thanks

    @alainnoel_tourneur@alainnoel_tourneur2 жыл бұрын

    • Awesome, thanks for watching.

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • wow very different. I hadn't seen inlay done until your channel. I really love the contrast of the light timber with the brass and the burnt edge. Just stunning

    @juliebarker1531@juliebarker1531 Жыл бұрын

    • Thanks for watching

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Frog bowl!! Love it .

    @listennowbreath@listennowbreath3 жыл бұрын

    • Frog bowl???

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Beautiful bowl! Another amazing job!!❤

    @sandiejacobsen9387@sandiejacobsen93872 ай бұрын

    • Thanks again!

      @SpragueWoodturning@SpragueWoodturning2 ай бұрын

  • What a Brilliant combination! You Put the shavings on paper, you can roll it into a funnel for quickly filling spots and a second one on your Matt will catch the loose shavings, you can again bend it to a funnel to place back into the jar to be used again later, it’s great with glitter or any of those fine mediums that you have to buy, “waste not want not”

    @amandathurston2720@amandathurston27202 жыл бұрын

    • Thanks, I always try to reuse all my inlay material, so of it can be quite expensive.

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • That fruit bowl turned out really beautiful, less is more! The brass shavings look cool! I thought that they wouldn’t be detectable, NOT! You can truly see it shine! Great job!

    @marycatherinelebouef-op4hf@marycatherinelebouef-op4hf Жыл бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Wow, that looks amazing! I actually thought you painted or laminated the edge of the bowl! I was shocked when you said, "Okay, lets get the torch and burn it!" 🤣 Definitely the last thing I thought I'd hear after all that work on a wood project! I love the natural edge of the bowl. It's really cool! I like that you don't cut them down to make it even. It makes for a much more interesting piece! It does have less holding capacity tho, so it's good you do both.

    @valeriefuqua4641@valeriefuqua4641 Жыл бұрын

    • Thanks so much! 😊

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • With the brass it looks steampunky. I like it.

    @kirstenknox2753@kirstenknox27533 жыл бұрын

    • I’m with you, lol. Thanks

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Beautiful as always! Nice pile of shavings in the background

    @robert421960@robert4219602 жыл бұрын

    • There never seem to be any shortage of them, thanks

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Great. 40 plus years of bowl making and I keep learning new ideas. thanks

    @kc696969@kc6969693 жыл бұрын

    • Thanks!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Shiny is my thing too and I love this bowl.

    @mjrulez100@mjrulez10010 ай бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning10 ай бұрын

  • You are brilliant! Great steady hands. And A+ for creativity!

    @cathuggerniowacity@cathuggerniowacity2 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • I have been watching so many videos from start to finish, and I have learned so much! Not only a great artist but a great teacher.

    @CharlotteBethany54@CharlotteBethany542 жыл бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • That's another beautiful bowl! The finished shape is very artistic, and the burnt black edges go well with the end result. And so with the inlays, it's quite attractive. This is another number 1 for me. Wow! Thank you! 👍🏻🤗💕🇺🇸

    @moniquemontague8645@moniquemontague86452 жыл бұрын

    • Wow, I really appreciate it! Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Simply beautiful Jim

    @jacobworkman6455@jacobworkman64552 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Well done, beautiful bowl, excellent vidéo. Inspiring. Darragh, France.

    @darraghquinlan3943@darraghquinlan39432 жыл бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Love the burnt rim . Thanks .

    @walterwright507@walterwright5073 жыл бұрын

    • It’s a good way to get away from toxic inks, thanks

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • The inlay on the inside of that bowl looks like a sunflower

    @scarlettehydes25@scarlettehydes253 жыл бұрын

    • Totally, thanks 🙏🏻

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Looking back at older videos. Still as impressive as current ones. Very well done and your video production is outstanding. Thanks for sharing.

    @Leefywood@Leefywood3 жыл бұрын

    • Thanks Wayne, I’ve learned a lot during this process that’s for sure and thanks for watching!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • It is a beauty. I was wondering about the wavy, burnt edges but they are very interesting. Nice work. Nice bowl.

    @user-ys7mh2qe2l@user-ys7mh2qe2l7 ай бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning7 ай бұрын

  • Well done!! Color composition is great!!

    @volodymirmelnyk7317@volodymirmelnyk73172 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Wow your toolwork is impressive!

    @johnbruhnke6349@johnbruhnke6349 Жыл бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Hi Jim, its defintely a beauty, wow, it reminds me to the paintings of Gustav Klimt. Last winter i started to fill a cracked bowl with cherry branches and soapstone powder and another one with maple branches and crushed malachite. You are a great teacher . Now I will try brass shavings. Thank you for giving us such impressing examples! Cheers Stefan

    @stefanaretz8136@stefanaretz8136 Жыл бұрын

    • Wonderful, thanks!

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • If you think hard...that's your first photograph 😂.

    @morgancalvi6675@morgancalvi6675 Жыл бұрын

    • Thanks

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • I haven't been through your entire video library yet, but have you considered doing some bowls, platters and vases in the shou sugi ban wood burning method? I think it would definitely be interesting if you combined the burnt wood, inlays and resin along with having warped rims. Turned out fantastic!

    @thereallyrealchristina@thereallyrealchristina Жыл бұрын

    • I did it on this video. Thanks kzhead.info/sun/bJqBf7KPsKB6ink/bejne.html

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Oh yeah. I love it. I love everything about your work. Forget about resin, and PLEASE make it shiny! Just love it!

    @wollaminfaetter@wollaminfaetter3 жыл бұрын

    • Thanks!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Sir your are do such great and inspiring work!!!

    @kalyan19818@kalyan198183 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • So much amazing depth and dimension in such a simple piece. Very lovely!

    @christinecolvin1111@christinecolvin11118 ай бұрын

    • Thank you so much!

      @SpragueWoodturning@SpragueWoodturning8 ай бұрын

  • I’m surprised! I did not think it was going to turn out to be so pretty. But it is very good work.

    @lyndaowen2154@lyndaowen2154 Жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Ooooooooooooo! Very nice! 👏👏👏

    @leisongivangomo5656@leisongivangomo56563 жыл бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • BEAUTIFUL BOWL INLAY.... I had never seen it done that way with tree branches.... Great detail of the process....Thanks again for the lesson!!!!!!!!!!!!!

    @randykniebes5364@randykniebes53643 жыл бұрын

    • My pleasure Randy

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Absolutely beautiful ❤❤❤❤❤

    @DanielleBard-hv2mk@DanielleBard-hv2mk10 ай бұрын

    • Thank you so much!!

      @SpragueWoodturning@SpragueWoodturning10 ай бұрын

    • @@SpragueWoodturning your welcome!

      @DanielleBard-hv2mk@DanielleBard-hv2mk10 ай бұрын

  • Symbol of beauty

    @MrNik4love@MrNik4love2 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • This is very elegant.❤

    @suelynpeters9661@suelynpeters9661 Жыл бұрын

    • Thanks

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • Enjoyed video. Lovely bowl!!

    @lindaredding4743@lindaredding47433 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Wow wow wow!! 👍👍👍

    @leftymcshea6876@leftymcshea68763 жыл бұрын

    • Thanks Lefty, you’ll learn a lot of lefty tricks here. Lol.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Stunning!

    @pennywilliams8451@pennywilliams84513 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • That is awesome, Jim!

    @RickTurnsWoodturning@RickTurnsWoodturning3 жыл бұрын

    • Glad you liked it, thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • I'm really a fan of your work . I just found your channel, about a month ago . But you are quickly becoming my favorite . I am not a turned yet . I am saving for my first lathe . Thank you for the inspiration .

    @sifudank@sifudank3 жыл бұрын

    • Awesome, thank you so much, Jim.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Awesome job!

    @rexb6478@rexb64783 жыл бұрын

    • My pleasure, thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Well done.. The details are great and the finished products are exceptional

    @garyfestarini9608@garyfestarini96083 жыл бұрын

    • Thanks Gary!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Beautiful!

    @shawndavis7862@shawndavis78622 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Beautiful work. The inlay definitely has a religious art feel to me.

    @koltar2000@koltar20003 жыл бұрын

    • Thanks!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Duct Tape should be worshiped...lol A very nice piece indeed sir. Nice to see how things change. Like the fact that you moved into the resin work, it gives it more of an artistic feel to you work. Like the brass it looks great sir. An outstanding bowl.🌿 👍👍👍

    @robboland9857@robboland985711 ай бұрын

    • Thank you kindly

      @SpragueWoodturning@SpragueWoodturning11 ай бұрын

  • Wonderful bowl Jim, love the idea of using branches from a different tree to fix defects. Keep well, Rob

    @RobBrandtWoodturning@RobBrandtWoodturning3 жыл бұрын

    • Thanks, glad you liked it.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Beautiful Piece!

    @frankybarra6067@frankybarra60673 жыл бұрын

    • Thanks 🙏🏻

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Love this style and shape

    @terriepriest4789@terriepriest4789 Жыл бұрын

    • Thanks!

      @SpragueWoodturning@SpragueWoodturning Жыл бұрын

  • its good to see content coming from canada

    @keurigmontreal@keurigmontreal3 жыл бұрын

    • Thanks eh, lol.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Stunning

    @nowthenad3286@nowthenad32863 жыл бұрын

    • Thanks again.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • This is so creative

    @shannonstoudt999@shannonstoudt9999 ай бұрын

    • Thank you very much!

      @SpragueWoodturning@SpragueWoodturning9 ай бұрын

  • Absolutely gorgeous

    @jackthompson8019@jackthompson80193 жыл бұрын

    • Thanks Jack!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • I've only started woodturning and am amazed at how beautiful your work is. 👌

    @lewiscowden618@lewiscowden6183 жыл бұрын

    • Thanks Lewis!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Beautiful bowl bud keep em coming

    @tonyisham9396@tonyisham93963 жыл бұрын

    • Thanks, new one tomorrow!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Inlay is an interesting idea. The original knot has more character.

    @dyu007@dyu0073 жыл бұрын

    • Thanks for your input, it’s not for everyone, Jim.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • great work!!! my fav so far. love your work

    @patsthemom@patsthemom2 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • so beautiful!

    @desireeferro1972@desireeferro19723 жыл бұрын

    • Thanks 🙏🏻

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • I love this one! The inlay is gorgeous. 💜

    @traceyrice@traceyrice3 жыл бұрын

    • Thanks Tracey!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Awesome work

    @Whitie7Original@Whitie7Original3 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • I love, love, shiny.

    @johndaniels7213@johndaniels72132 жыл бұрын

    • Me too! Lol. Thanks

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • Well done Jim! I look forward to your videos each week!

    @joelspring2487@joelspring24873 жыл бұрын

    • Great, thanks!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Thank you for the thoroughness of your explanations. Stay safe and well!

    @pbpleased7936@pbpleased79363 жыл бұрын

    • It was my pleasure, thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Such a cool idea

    @felicitywt9291@felicitywt92913 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Beautiful bowl, Jim. Love the effect of the branches and brass shavings, everything ties in perfectly. Thanks for sharing and take care.

    @tompavlik302@tompavlik3023 жыл бұрын

    • Thanks Tom!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Great job. Thanks

    @changkim1961@changkim19613 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Excellent piece Jim. I’m loving your videos. With the exception of Captain Eddy Castelin I find that most videos really are “watch how I do this” without providing sufficient details. With your videos you provide excellent info and instructions on how you go about with your craft as well as providing the pitfalls based on your experience. I’ve watched three of your videos since discovering your channel earlier today. I’ve learned something from each one. Looking forward to seeing more of your videos in the following days. For now, I’m wishing you continued success.

    @DV-xf5yf@DV-xf5yf3 жыл бұрын

    • Awesome! Thanks. I’ve also notice the same thing with a lot of videos on here. I don’t know if you watch Kim Tippin’s channel but she called me the other day and said that I’m the only person on here doing natural inlays too. I was a little shocked by this and I think she’s right. Stay safe, Jim.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Wow this one is exquisite..I love the black around the rim and the inlay looks like a fantasy flower !it even has a stem..This has been made out of a beautiful piece of wood..Defiantly one of my favourites 😀

    @christineingram55@christineingram553 жыл бұрын

    • Thanks Christine!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • stunning work

    @halimmouawad6256@halimmouawad62563 жыл бұрын

    • Thanks 🙏🏻

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • That’s awesome. I like it

    @MonicaKehlet@MonicaKehlet3 ай бұрын

    • Thank you! Cheers!

      @SpragueWoodturning@SpragueWoodturning3 ай бұрын

  • Beautiful.

    @oldreprobate2748@oldreprobate27483 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • BEAUTIFUL, you have great taste !!

    @sandramabrey4093@sandramabrey40933 жыл бұрын

    • Thanks Sandra!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Spectacular piece of art. No words!! 👍👏🏻👏🏻👏🏻👏🏻❤️

    @wandapiedra8973@wandapiedra89733 жыл бұрын

    • Thanks 🙏 glad you loved it.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Such a sharp edge!

    @MargaretGeorgemgse@MargaretGeorgemgse2 жыл бұрын

    • Thanks 😊

      @SpragueWoodturning@SpragueWoodturning2 жыл бұрын

  • 7:00: super cool branch box! Way to organize! 😃

    @leisongivangomo5656@leisongivangomo56563 жыл бұрын

    • Ha, that’s usually not the case, thanks.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

    • We all have moments of organization and total disorganization! 😁 you should see my craft space at the moment, NOT! 😆 Keep the awesome videos coming! 👏👏

      @leisongivangomo5656@leisongivangomo56563 жыл бұрын

  • Wow! That is really awesome brother!!

    @ericschenck9954@ericschenck99543 жыл бұрын

    • Thanks.

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • That is gorgeous Jim. Thanks for sharing all your tips & tricks. I’ll have a ‘go’ at doing this one of these days!

    @jeaniedyer282@jeaniedyer2823 жыл бұрын

    • Jeanie Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Really liked your fix.

    @vickipitts37@vickipitts373 жыл бұрын

    • Thanks again!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • That's a beauty Jim! Certainly have more appreciation of the work that goes into your inlays!

    @johnkilborn3800@johnkilborn38003 жыл бұрын

    • John Kilborn Thanks John, I really appreciate it!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Really beautiful! I'd love having that on my table!

    @TheViking1981@TheViking19813 жыл бұрын

    • Thanks 🙏

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын

  • Gorgeous! Saving the wood everyday 😉👏🏻👍🏻🖖🏻🇨🇦

    @bobshapka2902@bobshapka29023 жыл бұрын

    • Thanks, Bob!

      @SpragueWoodturning@SpragueWoodturning3 жыл бұрын
KZhead