KZhead
Ойын-сауық

Goodbye to Cable Chaos? FSP CUT593 Premium | RTX 4080 Gaming PC Build, Ryzen 7800X3D

Mr Matt Lee
2024 ж. 18 Мам.
42 359 Рет қаралды
Жүктеу

#fsp #pcgaming #asuspcdiy - As the industry turns its attention to reversed motherboards and hiding cables, FSP had other ideas... Welcome to the CUT593 Premium 'Ultra Chassis'.
Timecodes, though I don't recommend skipping for visual narrative reasons!
00:00 - A cabley Intro
00:51 - CUT593 Ovverview
01:46 - Build Hardware
02:16 - Motherboard Assembly
03:32 - CUT593 Assembly
06:20 - Airflow Visualization
06:50 - Cinematic & Desk Setup
08:37 - Coffee Thanks & Outtakes
The FSP CUT593 Premium comes with pre-routed CPU and 24 pin cables which neatly run through the chassis before being showcased through the side tempered glass panel. Theres three 140mm ARGB fans up front and one 120mm ARGB pre-installed in the rear too.
Airflow is more than adequate for most setups and FSP also included two different fascia panels. Interestingly, the ‘airflow’ focussed panel happened to be less efficient than the metal ‘aesthetic’ alternative in my airflow testing. This was likely due to the fixed position dust filter which unfortunately couldn’t be removed.
With that said, I chose to build with the TUF Gaming RTX 4080 and an AMD Ryzen 7 7800X3D, a very strong pair indeed and thermals were simply not a concern either way.
Final conclusion following build hardware list:
Main parts included in the build:
(USA Amazon)
Case - amzn.to/3Qz88rg
Cooler - amzn.to/3y4SRYV
GPU - amzn.to/3WppU4d
CPU - amzn.to/3wmVogF
Motherboard - amzn.to/3WuQoBg
PSU - Coming soon
PSU Alternative - amzn.to/3wxDRlT
GPU Extension - amzn.to/3QC0lZR
RAM - amzn.to/3wnMsYi
NVME M.2 - amzn.to/3y3w7IJ
Mouse - amzn.to/3yaPm3q
Keyboard - amzn.to/44qopVr
Desk Mat - amzn.to/3wpoZGi
Monitor - amzn.to/3UlHWSc
Microphone - amzn.to/4du4xoa
Lights used to film this video:
Godox UL150ii - amzn.to/3kVOwka
Godox UL60 - amzn.to/3Ymetb2
Main parts included in the build:
(UK Amazon)
Case - Coming Soon
Cooler - amzn.to/4dlZwOJ
GPU - amzn.to/3wqELAL
CPU - amzn.to/44BZez9
Motherboard - amzn.to/4a4UUtj
PSU - Coming soon
PSU Alternative - amzn.to/4bn17Sw
GPU Extension - amzn.to/3xZUyH2
RAM - amzn.to/3y4yjjk
NVME M.2 - amzn.to/3QujTPO
Mouse - amzn.to/4bI88h5
Keyboard - amzn.to/4dvXrzR
Desk Mat - amzn.to/44tJWfK
Monitor - amzn.to/4b4wIbU
Microphone - amzn.to/3UsbPjF
Lights used to film this video:
Godox UL150ii - amzn.to/3wUWFIx
Godox UL60 - amzn.to/3xaH6N7
Total build cost - $2500
"As an Amazon Associate I earn from qualifying purchases."
FSP have been long known for producing industry leading PSU’s, it’s interesting to see them move into the case market. Whilst the CUT593 certainly wouldn’t be a simple build for the average PC builder due to finicky pre-routed cabling, I’m keen to see where they push forward with future designs.
What’s your thoughts on the CUT593 Premium? Could you see this on your desk setup? Let’s talk in the comments
Thanks to @PowerNeverEnds for supporting this project
---------------------------------------------------------------
Subscribe to my 2nd Channel for more! @MrMattLeeV2
---------------------------------------------------------------
☕☕ BUY ME A COFFEE! ☕☕
Show you support for the channel. Bonus - get a shout out in the next video! No subscription or sign-up required!
www.buymeacoffee.com/MrMattLee
---------------------------------------------------------------
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
----------------------------------------------------------------
Find me on socials:
/ mr_matt_lee
/ mr_matt_lee
/ mrmatthewlee

Пікірлер

  • That cable management is a work of art

    @rahulmandal0312@rahulmandal031212 күн бұрын

    • Amazing how such great cable management can be achieved with very little to no experience in this specific case. Just as with anything to do with cable management, a little patience is still required 😊

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • @@Mr_Matt_Lee yea.... it's a really awesome case

      @rahulmandal0312@rahulmandal031212 күн бұрын

  • Not gonna lie… that front panel looks like a grill with that red leds on the front fans 🤣

    @aeronybrek4696@aeronybrek469612 күн бұрын

    • Knight Rider ain’t got a thing on me right now 😂

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • ​@@Mr_Matt_Leewith the smaller hole front panel installed it appeared to have more velocity getting the smoke out. Is that what you were seeing Matt?

      @Spushed@Spushed12 күн бұрын

    • @@Spushed yes, I outlined why I think that in the description too ✌️

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • Fire up some AA titles and lets get that grill cookin'

      @scottyzepplinphotography1188@scottyzepplinphotography118811 күн бұрын

    • Pc cases are like already become like microwaves and aquarium, the grill is the newer trend 🤣

      @Rayu25Demon@Rayu25Demon7 күн бұрын

  • Came for the build, stayed for the banger music

    @castorcarvi@castorcarvi12 күн бұрын

    • I hear you! Me too 🤜❤️‍🔥🤛

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • @@Mr_Matt_Lee We need a playlist!

      @Tech-Tempest@Tech-Tempest12 күн бұрын

    • Same. The original music video on Ooyy’s channel has less than 5k views at the moment: Umbélé - OOYY ft. Ebo Krdum

      @ganjabobby@ganjabobby11 күн бұрын

    • Always

      @ericsbuell@ericsbuell8 күн бұрын

  • The case looks normal with just pre-installed cables... but your vid makes it special LOL... Good job! 👍👍👍

    @kittipat33t@kittipat33t12 күн бұрын

  • perfect editing, music choice and just allround awesome video as always

    @giftig694@giftig69412 күн бұрын

  • never seen a case do that before where the cable management is a work of art impressive nice set up of components great video

    @MARK02118@MARK0211812 күн бұрын

  • Masterpiece! The amount of thought on the case, and the hard work to make this video is insane! Was watching this video while eating, ended up staring on my screen and stopped eating XD

    @Basics_of_Gameology@Basics_of_Gameology12 күн бұрын

  • You are the best in what you are doing. Top notch content as always.

    @pocosagor3118@pocosagor311812 күн бұрын

  • Definitely a beauty. No more cable mess on the back of the case

    @pangeranrio0112@pangeranrio011212 күн бұрын

    • Feature, not forget I think is the idea for these cables, right?! 🤘

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • @@Mr_Matt_Lee yep

      @pangeranrio0112@pangeranrio011212 күн бұрын

  • Great man❤ Beautiful Ryzen build. Thanks👍🏼

    @supernat961@supernat96112 күн бұрын

  • That back panel looks so clean. ❤

    @gpredd1@gpredd112 күн бұрын

  • Like always, excellency.

    @iogarchi@iogarchi12 күн бұрын

  • Happy Bank Holiday, Matt. Thanks mate. ☕️

    @cheekster777@cheekster77712 күн бұрын

    • Happy bank holiday to you too buddy! 😊☕️

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • Nice work bro always amaze me

    @thetmv1730@thetmv173012 күн бұрын

  • Absolutly great video Matt. Top-hardware💯👍Love it ❤

    @MathiasG78@MathiasG7812 күн бұрын

    • Thanks bud! Glad you enjoyed it 😊🦾

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • very nice, perfect cable management

    @grandpa-gamer-1698@grandpa-gamer-169812 күн бұрын

  • Keep going mat, ur video is amazing 🔥🔥🔥

    @nevermore4987@nevermore498712 күн бұрын

  • Wow ❤❤

    @VKRaptor@VKRaptor10 күн бұрын

  • Great work as allways Matt....👍👍👍

    @Brzina77777@Brzina7777712 күн бұрын

  • Great video as always, love the included cables❤. 7:17 GPU has a fingerprint smudge😂

    @tyrion911@tyrion91112 күн бұрын

  • The color makes it look like a nuclear reactor haha. Well done Matt another smooth job

    @hoangnamhl111@hoangnamhl11112 күн бұрын

  • I enjoyed watching this step by step on this one as the pre-routed cable is an excellent innovative idea for those who are enthusiasts but not professionals. The case looks esthetically pleasing with a pinch of salt that you are "the best case build producer" ever. Also the pricing is decent with good number of fans and as cable management can get expensive with custom cables. Thank you for sharing!

    @gokhanbat6169@gokhanbat616912 күн бұрын

    • Great comment, thanks Gokhan! Yes for sure, cable management no matter how simplified or complex still requires a degree of focus and patience but the results are certainly worth it in this instance. Have an awesome week!

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • Another nice build, with another case wanting to build in😂 Thanks Mr. Matt😍

    @xGamerGeek@xGamerGeek12 күн бұрын

    • Be nice if it was a ninety-degree MB case.

      @brodriguez11000@brodriguez1100011 күн бұрын

    • @@brodriguez11000 meaning?

      @xGamerGeek@xGamerGeek11 күн бұрын

    • @@xGamerGeek look up Silverstone raven case.

      @brodriguez11000@brodriguez1100011 күн бұрын

  • Wow. A pretty good looking case from FSP.

    @MirelRC@MirelRC12 күн бұрын

  • As Always Classy! ☕👌

    @Squally08@Squally0812 күн бұрын

  • cool, thanks Matt

    @leviathanpriim3951@leviathanpriim395112 күн бұрын

  • Now that is something what you don't see everyday😊😊🤩

    @adamzorn@adamzorn12 күн бұрын

  • Nice top air flow very fast out 😊

    @christopherbussiere4415@christopherbussiere44158 күн бұрын

  • Lovely video as always matt, this case pique my interest since cable management always a hassle.

    @magtral@magtral12 күн бұрын

    • It’s nice to see cables being a feature rather than an after thought that’s for sure. Glad you enjoyed it 😁

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • That splash of blue is a bigger deal than we'd give it credit for. Ngl, it turned my wheels more than that dolly-in at @0:10. Inspiring.

    @cannotkazi@cannotkazi12 күн бұрын

  • lol you needed this. Also BRO coolling has been doing this forever.

    @CakePC_Jake86@CakePC_Jake8612 күн бұрын

  • the vga holder so lit

    @theo-jb1up@theo-jb1up11 күн бұрын

  • damn those pre-routed cables look beautiful. Would buy the itx version of this.

    @Tutku35@Tutku3510 күн бұрын

  • Simple, Clean and Fast :)

    @johnzepeto1899@johnzepeto189912 күн бұрын

    • A bit like me on a Monday morning according to Mrs Matt Lee 🫡

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • What in the world do you do with all these PCs?! the videos are incredibly satisfying, your editing style is great!

    @FreshPotts@FreshPotts12 күн бұрын

  • Great work on the build, videography and music selection as always! NEED to know the name of that last track played. 🔥

    @PerformanceProjects@PerformanceProjects12 күн бұрын

  • Perfect 💥💥💥

    @darthhokum@darthhokum12 күн бұрын

  • Good music, beautiful build. I wanted to ride a bike. Like & Thanks =)

    @Soddended@Soddended12 күн бұрын

    • 🙌😎

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • 7800X3D + 4080 is honestly the best combo at the moment. Im running the same and its the best setup I've ever had. Interestingly too, first aircooled CPU I've had in 3 builds!

    @sheshd@sheshd12 күн бұрын

  • I need a playlist of all the songs in your videos. their so good

    @29wildfire55@29wildfire5511 күн бұрын

  • Clean 👌

    @dmitrykisel9564@dmitrykisel956412 күн бұрын

    • I’m actually really loving the black and white theme with this one 🖤🤍 darkness with a hint of clean

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • Very cool, I’ve been thinking about swapping cases, might get this one. I might swap the pre routed extensions for regular braided cables directly to the psu.

    @billcipher534@billcipher53412 күн бұрын

    • You can actually do that without any issues at all. I tested it off camera using the individually sleeved TUF Gaming PSU cables and they worked a treat too 🤘

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • @@Mr_Matt_Lee have used used the Corsair shift psu no you think there is enough clearance for those since the connections are on the side of the psu?

      @billcipher534@billcipher53412 күн бұрын

  • Hell yeah ❤❤

    @almosgugi6676@almosgugi667612 күн бұрын

    • Let’s gooo! ❤️‍🔥

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • Love the right side panels, the rest it's just a normal case

    @elGenericos@elGenericos11 күн бұрын

  • I wonder if the cutouts align to any of the reverse motherboard options. The shroud and wire management with this case would actually help with back-side visuals even more.

    @francoisdubois80@francoisdubois8012 күн бұрын

  • Cables matter for sure, more opportunity to add style. I have some awesome cables courtesy of MML that I enjoy looking at everytime I turn my PC on.

    @Jenks1@Jenks112 күн бұрын

    • Jenks, aka, keeper of the MML core PC Build! Good to see you here as always buddy 😁

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • Mr Clean Lee. Tremendous video. I have some questions: 1 - What is in that mug? Coffee or Tea? Very important. 2- It's been said positive pressure inside the case has a bit more benefit than negative - does having an AIO/Radiator change this? (regardless if on the front or top). I legitimately don't know about this. Thanks! Also I've discovered recently my Cougar case has a personality flaw where it doesn't want to be screwed in or out in certain areas and seeing the quality of these cases and the fact you can put in a screw and works as intended is just fantastic.

    @LautaroQ2812@LautaroQ281212 күн бұрын

  • that's crazy

    @xsselb@xsselb12 күн бұрын

  • Очень необычное решение для корпуса👍👍

    @subarubrzdream2514@subarubrzdream251412 күн бұрын

  • clicked>liked>watched

    @Rodner14@Rodner1412 күн бұрын

  • Mr Matt Lee, thank you once again for creating such high quality pc building vids. You, yourself is THE work of art 🖥🤍

    @Rukuji@Rukuji12 күн бұрын

  • Fantastic! I really dislike the back-connect series because I think power cables are a romance unique to desktop PCs. If every case came with a power cable management kit, actually nobody would care whether the components are back-connect or not.

    @CHNHNGXN@CHNHNGXN12 күн бұрын

  • Neat😊

    @shaunthom@shaunthom12 күн бұрын

  • Сборка просто крутая 🙂👍 при помощи ваших обзоров я научился собирать компьютеры самостоятельно спасибо большое 😎

    @user-zc9lx7xk5d@user-zc9lx7xk5d12 күн бұрын

  • Nicely done! Kudos! This is whitest Fury RAM RGB I ever saw. Did you, somehow, change led lights in it?? 😃😃😃

    @DoktorHaus014@DoktorHaus01412 күн бұрын

  • Matt what is the name of the small black screwdriver you use in all your videos? Have you ever tried any electric ones? Thought you had in one of your videos but maybe it was someone else.

    @shiro5392@shiro53926 күн бұрын

  • Came for the production quality, stayed for the music - I really need to know the name of the song from 06:20 mark, pretty please! :)

    @PavelSekerka@PavelSekerka12 күн бұрын

  • 👏 👏 👏 ❤

    @sergeyabdulwadud98@sergeyabdulwadud9810 күн бұрын

  • face your casing oh shit, simple but strong. i like it

    @7smawan@7smawan12 күн бұрын

    • 😁✌️ yessss.

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • Phanteks evolv x comes to mind

    @a.tevetoglu3366@a.tevetoglu336612 күн бұрын

  • I`m wondering what you use for the smoke test?

    @DHAROMG@DHAROMG6 күн бұрын

  • ah yes a mr matt video just dropped. Time to have the best meal of the day 😂

    @martinraymundo125@martinraymundo12512 күн бұрын

  • I thought this is a build where the motherboard has it's headers on the back. Honestly cable management at the back of the PC is pretty useless to me. But great build video as always!

    @JanPeterSpecht-jf9pg@JanPeterSpecht-jf9pg12 күн бұрын

  • Asus top ❤❤❤❤

    @Stanislav7180@Stanislav718012 күн бұрын

    • You know it 🦾

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • 😍😍

    @LYGRAPHIC@LYGRAPHIC12 күн бұрын

  • Do the pre-placed cables necessitate use of an FSP psu?

    @heinzl8583@heinzl858312 күн бұрын

  • those mismatched cable combs on the pcie would trigger me after 5 mins lol. nice build though

    @psttech4290@psttech42903 күн бұрын

  • What camera are you using to film these videos?

    @Martin-ni1mg@Martin-ni1mg11 күн бұрын

  • Matt, is it possible to do Formd T1 build in the future with amd cpu/gpu?

    @zette4273@zette427312 күн бұрын

    • If I can actually get a Formd T1 here in the UK 💀 I’ve been trying.

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • 👍👍👍👍

    @slvrog3470@slvrog347012 күн бұрын

    • 🦾🦾🦾🦾

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • What was the little object you placed vertically under the GPU? It looked like it was used for support…

    @SirTheoTheWhite@SirTheoTheWhite12 күн бұрын

    • It’s an anti-sag bracket which comes with some specific ASUS Graphics cards. The TUF Gaming RTX 4080 included. Fun fact, it also doubles as a screwdriver 😎

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • @@Mr_Matt_Lee Very nice! Thanks for the info 👍🏻 I’m just getting back into pc building(used to do it for a living) and enjoyed your build. Very Clean & nice color scheme.

      @SirTheoTheWhite@SirTheoTheWhite12 күн бұрын

  • What do you use to see the air flow?

    @chili2k333@chili2k33312 күн бұрын

  • C O O L V I D E O M Y G

    @kshitijsingh978@kshitijsingh97812 күн бұрын

  • Is this available with 120mm fans at the front instead of 140s?

    @Vreenak4308@Vreenak430812 күн бұрын

  • What do you have temp cpu and gpu on stres / gaming ?

    @bachcomp1@bachcomp112 күн бұрын

  • hi Mr Matt, can you build a pc with Jonsplus Z20 mATX case?

    @blk.kls21@blk.kls218 күн бұрын

  • Well why not the BTF motherboard and that ASUS Special Pcie slot GPU? Almost the cleanest build for now

    @henrydrago@henrydrago12 күн бұрын

    • Sadly the case doesn’t support the BTF hardware, but I agree… if it did, it would be super clean!

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • MSI MEG Maestro 700L PZ Mid Tower next?

    @Clouder77@Clouder778 күн бұрын

  • Can you fit dual gpus in that case?

    @Ryzn322@Ryzn32212 күн бұрын

  • will you build in a nr200p chassis?

    @cyan1de828@cyan1de82811 күн бұрын

  • Asus BFT and corsair LINK are the way

    @xradeckx@xradeckx12 күн бұрын

  • Is there a matx version of this?

    @markmontes007@markmontes0077 күн бұрын

  • can you make a video with phanteks g500a?

    @radeuz8831@radeuz883111 күн бұрын

  • I thought it's the GR701 Hyperion for a sec 😅

    @NOVAPHANTOM9@NOVAPHANTOM912 күн бұрын

  • Привет Matt Lee, хотелось бы видеть прекрасные сборки не только в комплектующих от ASUS, если получится, то наполни канал разнообразными сборками, Спасибо, удачи!

    @Gambit__13@Gambit__1312 күн бұрын

  • this build like chinese pc build, the cable management so pretty hahaha

    @Str8look@Str8look12 күн бұрын

  • Blooper compilation when?

    @meakle001@meakle00112 күн бұрын

  • It's good so you don't have to organize wires...^^ ☕

    @venice9443@venice944312 күн бұрын

    • Yup! That’s the idea 😎🙌

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • The end of cable clutter????

    @chicopm@chicopm12 күн бұрын

  • That's a grilled fans 😂

    @pauppey6332@pauppey633212 күн бұрын

  • you should make a PC that can handle Star Citizen 🤣🤣🤣 but anyways this looks clean asf!!!!! oh wait... yea the specs you provided can handle it 🤣🤣🤣

    @MadsofMads@MadsofMads12 күн бұрын

  • If you don’t mind dated graphics, like PS2 level, then city of heroes is easily one of the best super hero games ever made and it’s completely free to play (PC only)

    @Alex-1776@Alex-177611 күн бұрын

  • As soon as btf motherboards become Accessible and cheap.. I'm done with cables 😅

    @mawandaeed@mawandaeed11 күн бұрын

  • Do you sell the pcs you build?

    @Xxthebose_21xX@Xxthebose_21xX11 күн бұрын

  • nah the fingerprint on the TUF logo got to me

    @Jinxau_@Jinxau_12 күн бұрын

    • It got to you? It got to me too, that’s my identity right there 😅

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • @@Mr_Matt_Lee what has been seen cannot be unseen

      @Jinxau_@Jinxau_12 күн бұрын

    • @@Jinxau_ 👁️👄👁️

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

  • I want 185mm CPU cooler clearance minimum.

    @Happy-295@Happy-29512 күн бұрын

  • is it for sale?

    @Schubeedoobee@Schubeedoobee12 күн бұрын

  • 90% there. the cables need more comb, dear FSP.

    @cordlesswire@cordlesswire12 күн бұрын

  • this chassis not include standoff?

    @liekarts2936@liekarts293612 күн бұрын

    • It did include standoffs, they just weren't pre-fitted from factory which was a little unusual for ATX

      @Mr_Matt_Lee@Mr_Matt_Lee12 күн бұрын

    • @@Mr_Matt_Lee Owh okay I understand now 👍

      @liekarts2936@liekarts293612 күн бұрын

    • @@Mr_Matt_Lee Owh okay I understand now

      @liekarts2936@liekarts293612 күн бұрын

  • Que musica top. qual é.....

    @PlayrGames@PlayrGames12 күн бұрын
KZhead