Maintenance and Care for Specialized Mobile Crane Axles
2024 ж. 5 Қаң.
231 403 Рет қаралды
#CraneMaintenance #AxleCare #MobileCraneRepair**#auto #mechanic #mechanicsteve #automotive #viral #fyp #autos #cars #truck #excavator #mechaniclife #mechaniclife #trucks #car #viral #fyp #automechanic #CarLovers #AutoEnthusiast #CarLife #DriveWithPassion #AutomotivePhotography #CarObsession #Motorhead #RideOrDie #DreamCar #CarCulture #ClassicCars #ExoticCars #CarShow #CarPorn #CarSpotting #CarCommunity #FastCars #Supercars #CarGoals #ModifiedCars
Excellent video ! 👍
зор
감속기 허브 유성기어 오랜만이다
예, 구식 휠 감소 장치일 뿐이지만 여전히 크레인 섀시에 널리 사용됩니다.
good jop
Задняя тележка перевёрнутого типа
Ни хуя себе, колодки тормозные на болты и сварку 🤦♂️ кто потом их будет снимать - ох намучается.
Нет, его очень легко разобрать, для этого можно воспользоваться электрической отмычкой.
Good job! How much does such a puller cost?
Hello, this is not expensive in our country, less than fifty dollars.
@@truckdriver4953 Thanks for the answer. Regards.
해코지방법 처방약 큐넷
serviço muito bem executado
Fico feliz em saber que você considerou o serviço muito bem executado! 🚗🔧😊
А масло залить?
Да, туда заливают трансмиссионное масло.
I wish calm for the next mechanic, next brake shoe replacement will be a headache with these welded bolts... rivets are soo easy to remove
The welding method described is quite common in small auto repair shops, especially when they lack riveting equipment. In these cases, brake pads are often secured with screws, but screws can easily come loose. Therefore, welding is used to secure them, and a backing plate is welded on the back to prevent loosening. When it's time to replace the brake pads again, the welded part can be easily removed with an electric chisel, so there's no need to worry.
Винтиками накладки закрепил и приварил😅да
кажется, что вы выражаете удивление или разочарование в связи с методами закрепления и сварки какой-то детали в виде винтов. Четкое и профессиональное выполнение ремонтных работ важно для безопасности и надежности автомобиля.
интересный метод. в первый раз вижу. вопрос только в том что будет делать он в следующий раз? как срезать эти винты? изнутри не подлезть турбинкой. снаружи остатки накладки пилить только
А то, что болт в отверстии болтается это нормально?? Накладки провисят до первого торможения.. Хоть бы винты м8 под конусную шляпку применили чтоли