Microsoft Flight Simulator All graphics settings Compared | Best settings ✈
MSFS 2020 ✈ Optimization guide, NO BS, NO Gibberish Talks, No Control Panel Sh%t, NO time-waste just pure content, you decide!
All settings compared, Optimal settings for Visuals & Performance....
• You can set everything medium here to High, & clouds ☁️to ultra, if you have better PC.
✈
0:00 Terrain Shadows
0:35 Volumetric Clouds
0:57 Texture Resolution
1:18 Water Waves
1:37 Reflection
1:58 Terrain LoD
2:18 Anti-aliasing
2:44 Buildings
2:50 Contact Shadows
3:15 Shadow Map
3:36 Light Shafts
3:49 Windshield Effects
4:06 Object LoD
4:32 Trees
4:55 Texture Super-sampling
5:19 Grass & Bushes
5:39 Anisotropic Filtering
6:03 Lens Flare
6:10 Generic Plane Models
6:20 Ambient Occlusion
7:05 Airport Traffic
7:19 Best settings
7:28 Comparison
-----------------------------------------------
Recorded using nvidia shadowplay 4-7 FPS loss
the fact that you gave us the best settings at the end is the total win for me, thank you so much!
there not the best settings lmao, Anisotropic filter on 8x and clouds ultra would be way better
u can set everything here on medium to high & clouds to ultra if u have better pc, & Anisotropic filtering doesn't cost any significant performance hit on 16x
@captnolan737 pretty sure he meant the best settings for low to mid range systems. If you happen to rock an RTX card there is already no use in comparing performance changes between settings as they happen in the video. Same goes for a newer gen CPU. They give you a rough estimate, but clearly not a definitive answer.
@@xKuro63x I have a 6700XT so it's mid range
@@xKuro63x I am using it to limit the power draw on my 3090, so that I can have the best visuals while limiting the framerate to about 45 fps.
A very welcomed and much appreciated piece of work. And on behalf of us all - a big thank you !
Excellent comparison video! 👏🏻👏🏻🤩 Thank you 🙏🏻 very much for your help and support with MSFS2020! 💪🏻
This is by far my favorite video about msfs settings. We can compare the big or the barely noticeable improvements of the visual with their impact on fps Thanks for that huge work.
So beautifully presented in absolute clarity--you hit it out of the park! Thank you for sharing your genius.
Great work mate! Absolutely a beautiful video with a clear purpose, no bs and to the point. I learned some. Subbed!
This is the best of all comparisons between settings. I love all the care of detailed settings. Thanks a lot, I'm subscribed to your channel. Good stuff.
Best video on this topic I've seen so far! Good job!
This is great! I have been dissapointed by my performance. But now with your settings my game actually runs smoother with better graphics! Thank you Sir!
This is one of the best and useful videos on optimising settings in Msfs. Thanks a lot mate
I learned a lot - there are so many settings that I never really explored before. thanks!
The best video on this subject that I ever saw ! Thanks a million!
Great video . This really helped me get good results. I like the FPS with each slide.
This is awesome! The video I didn't know I needed! I can't imagine how long it took you to put it together. Not only are the comparisons great, but just showing what each of the options are without any unnecessary commentary is perfect. Great work! I'll definitely be bookmarking this and referring back to it multiple times.
Good job. I'm only interested in the MSFS (and DCS, if you end up doing one) but I subscribed because you're putting in the work to create something truly useful - thanks!
Thank you so much for a most excellent video! A very good common sense approach to running FS2020.
This is exellent work! thanks for taking the time to make such a detailed video. Very helpful
Crazy to see how the so called "Frame Killers" don't even make a noticeable enough visual impact when on Ultra settings. I dialed so many settings down to High, thank you for the great video! You got a new Sub!
Five stars! Thank you for taking the time to do this for the community. You've already earned my sub with just this effort. (VR settings requested by me as well, please😉)
This format is genius!!! Well done and thank you!
Thanks a lot for this absolute perfect and important video!👍🏼
Excellent work - always wanted something like this to compare. Amazing how little obvious difference there is for many settings. Now we can target where to push and pull our system capabilities
Thanks so much for your amazing work! Pretty useful!
Bro trust me when I say this: you WILL get a TON more subs, your content is unique and VERY straight to the point, no one does that. Sorry for CAPS just wanted to emphazise how much I LOVED your content.
What a great idea of a video. Well done! Great stuff
That is very useful information! Thank you!
A fine piece of work. Subscribed. tnx
Sir, you are the real MVP, this is great!!
Great video and straight to the point!!! Thank you for sharing!!!
Thank you SO MUCH for making this straight forward comparison of settings without all the confusing technical descriptions others like to bombard us with! And for this 66+ simmer with @2600hrs on FSX and MSFS 2000… It’s like I’ve been led to the fountain of youth!😂👴🏻🇨🇦 Subscribed!
That was definitely worth a sub... thanks!
Absolutely GREAT video! I felt like I was at the Optician when they ask "is this lens better, or this lens better?" lol Also to see the relative impact on FPS 'in the flesh' so to speak - Thank you so much really appreciated!
Best video comparison EVER! This really makes a huge difference. Thanks a lot!
You rock! I'm not getting more fps from my Nvidia GTX 1060 6GB but the ones I get are consistent and never drop, even on the Maverick missions at low altitude. Great job and thanks for sharing.
Best video on this subject. Superb work. Thank you so much
Good video. I like most of your settings. I use Ultra clouds, and DLSS-Quality (instead of TAA.) Thanks for taking the time to record and edit this into an easily digestible form.
Brilliant stuff! Many thanks
Amazing stuff! It's pretty impressive to see how some settings have so little impact on overall visuals but so much on fps. I'll be tuning my settings asap.
thanks!
Thanks so much for this. It helps tremendously.
txxxx! the Best Test config in MSFS2020
Just what we needed, thanks
Well done, thanks for the hours of hard work!!
Thank you very much for this wonderful work. I know how much work it is to put all this together and I really appreciate this great service. Have a good one and always happy landings.
Very useful, Thank you!
Excellent work; thank you for your time!
Thank you so much for this relly great video! Lots of work you put in here..Wow! this helped me alot!
Brilliant video. Thank you. Much appreciated.
Thanks for this interesting comparison. I will make changes to my msfs settings
Thank you so much. This is a very helpful video😊
amazing! That's a lot of work, thank you!!
I have implemented some changes based on your recommendations and I have a 40% increase in performance. The planes fly with a new fluidity and I’ll get used to the slightly lower visual resolution. Thank you for this.
For me, visual resolution is way down the list… Just trying to SURVIVE is my priority!😂👴🏻🇨🇦
Thank you for this video! I am struggling with settings till I get something that cannot bother me of waste or minimal. Cheers
Its the best video about settings for MFS2020.
This saved people hours of fiddling with the settings! Thank you!!
Although i have a high end system including the 4090, there are some settings on here that i've defo going to adjust! At some stages of the video i had to pause it and really look! Some making no differencrle to the eye. Great vid thanks for your time 👍
Cool ! Now I know with what visuals effects I'll play !
Best video about setting comparison! Thanks for that!
Side note: main difference between high and Ultra on Windshield effects, is that on Ultra you will see cockpit reflections, especially at night. On High, no cockpit reflections
I have the Ryzen 7800X3D on a RTX 3070Ti, 32gb 6000mhz ram i generally got good fps, 50 to 60 in busy big airports, 80 to 90fps in smaller less busy airports, depending on traffic... Understanding the settings to keep good visuals and still get good fps really helped, going off what you suggested but just keeping my resolution at 1440p and DLSS on balanced, i now get 60 to 70fps in big airports and 90 to 115fps in smaller airports, i didn't realize how much some of the settings ate up performance. I appreciate your guide.
Great video!!! Thank yo for all the time you put into this. Subscribing now
Very beautiful, thanks
Very, very good job, buddy!😊
good job man, will try this later
Good job, thank you for your work!
great work. god bless u. ur channel will get millions of subs.
Good stuff! Thanks
Thank you. Subscribed.
This was great without having to listen to loads of narrative which can be too intense. Well done for that. I do tweak here and there depending where I fly. I think 35 - 40 fps is adequate for Msfs. Also, I have an Rtx 4070 ti coupled with a mediocre CPU and Frame generation causes massive lag. So I leave it off and just use DLSS 3 (which I know is not available on your card).
YOU ARE A GENIUS! Thanks!
Thanks ! Great job.
Thank you very much for this video, i now have good looks and fps for msfs
Thanks for showing the comparison here.
Great video comparison.
This is helpful for players who can already run the sim at a very high level. For the rest of us with cards like the 1080 and CPUs like the 8700K, it is entirely dependent on whether or not you're main thread locked. If you are, there is likely going to be zero difference between the optimal and ultra settings (in fact, I tested it and contrary to the dramatic 20+ FPS difference, I had a 2 (two) frame difference with these settings. Instead, focus on things that impact your CPU such as traffic. Use FSLTL instead of MSFS's traffic and move the sliders as far down as possible (read up on FSLTL, as well, it's important you get your settings right.)
Damm good video and optimal very good FPS point
Most intelligent and smart video I saw,, thank you for the time and for sharing,, cheers
Damm sometimes the small channels really impress me
Excellent work! Must have taken hours and hours !
Thanks for doing this, I'm sure it was a lot of time and effort to put the comparison is this very clear, simple and amicable way. I have to confess that I love and hate this software. Yes, we are far, far better than in the MSFS98 version, when I started to use it....but still does some things that are really, really annoying, and amazes me that no one in all this years never did something to correct this. I have a mid-tier hardware so I would not say that the occasional CTD that I still have is the software fault, probably approaching a big congested airport like Anchorage or Heathrow without doing a tweak or two to the config before is my fault and not the software, and if I want to get rid of that I should invest in better hardware, simple like that.....But when you are on short final, and the approach controller calls you to ask to "climb to 12000 feet" instead of giving you the hand off to tower, that is pure and simple lack of quality control from the software developers. Problems like this has been inherent to MSFS since the 1998 version, and after 2004 Century of Flight, FSX and now MSFS 2020, no one has made the corrections to those lines. Let's see what do we have in the announced 2024 version, although I'm not so excited with the announcements, It doesn't look like any of the traditional problems will be addressed.
good video, keep on!
You definitely have the best video for comparing graphic settings, but I would like to see the comparison with a more beefier system such as a RTX 3090 and a system with 32 gigabytes of ram
Excellent Work!
Best MSFS video I have seen....
Many, many thanks man... appreciate the time taken to do this helpful guide. 😃👍
Excellent, thank you.
Thanks for this information, hope that it makes my out of date i5 system work better.
I didnt think there would be a big difference between the settings tbh, but dang that High/Ultra settings are gorgeous 🤩
Really good. Please do another specific to VR
Very good indeed. thanks!
Good job! Helpful.
This is great. Even though I have i7 and 4070ti I always wondered what would do what when changed. This is perfect. Shows how little difference visually makes such a big fps benefit. I’d rather turn down unnecessary blades of grass and trees and AO and run up aircraft density.
Very nice job. Thanks
Best vr driver ;) and vr setting :0? Cheers big thanks for you work
Amazing!!! Thank you.
Just one tip for nvidia gpu users. Instead of setting 16x in the sim for anisotropic filtering set it in the nvdia pannel
Nice video 📹 💯...thank you🛫🍺
OUTSTANDING!
Outstanding Thank you
Amazing!!!!! I use a AMD 5800X3D, 32 Gb DDR4 3600, 3080Ti, NVME, and resolution 3440x1440. ULTRA = 64FPS, your CONFIG 84FPS, in same place and same airplane, obviously. Thanks for show us the real difference between configs. The change form me is, I will go block in 60FPS and my GPU go to work more cold and more silent.
tnx bro, nice job
Como tu dices sin tontearías, pero efectivo y simple, muchas gracias.