KZhead
Автокөліктер мен көлік құралдары

Custom VW Beetle Door Panel - Automotive Upholstery

Cechaflo
2018 ж. 20 Қаз.
73 900 Рет қаралды
Жүктеу

✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
I show in this video an artisan way to customize an old 'VW Beetle original heat engraved door panel'.
I have used a soft pressed cardboard 1.3 mm thick as padding. The material on top is a synthetic vinyl material 0.5 mm thick.
This sample is just a 'smaller replica' that looks similar to a real one. The 'channels' were cut 6 mm wide. The final outcome for the channels would be of 5 mm considering the vinyl thickness.
For better results I would recommend to 'laser cut' the cardboard pieces.Fortunately, these machines could be found everywhere.
I also show how to replicate the original pleated VW bag.
I hope the enthusiasts enjoy the video and find some inspiration from this wonderful art craft!
Cesar
Raised Car Door-Panels • Raised Car Door-Panels...
MBenz Door Panel • High&low reliefs On a ...

Пікірлер

  • Raised Car Door-Panels kzhead.info/sun/nb6NZrqhg4hpkmw/bejne.html MBenz Door Panel kzhead.info/sun/etWQp9OcgWd_h40/bejne.html

    @Cechaflo@Cechaflo5 жыл бұрын

  • Hello CECHAFLO good day, greetings and congratulations, as always GREAT video on this door panel, thank you for your video, once again fraternal greetings, your friend Oscar.

    @oscaraguirre602@oscaraguirre6022 ай бұрын

  • Wow !! I think Cechaflo is from another planet.

    @teresahardy5895@teresahardy5895 Жыл бұрын

  • Man, the way you did that corner was awesome. You definitely learn something new everyday with your videos. 👍👏❤

    @jorgesoto4847@jorgesoto48472 жыл бұрын

  • You make it look like anyone could do this. A true craftsman and a testament to the skill in telling your story through video!

    @40mick@40mick5 жыл бұрын

  • Спасибо Маэстро! Ваши уроки это клад! Старая школа лучшая!

    @user-is2fn3gg3c@user-is2fn3gg3c5 жыл бұрын

  • i just knew I would learn something. I wondered if he was going to a french seam on the door panel, but I like the recesses done with precision. The double cuts in the inside corner, and that other corner...you did the other corner, pinch, pliers, trim it. Sewing, well, watch the magic happen before your eyes with Chechaflo !

    @DanTheManIOM@DanTheManIOM3 жыл бұрын

  • Thank you far taking the time to share your art, truly inspirational!

    @pmgear@pmgear5 жыл бұрын

  • Great as always! Thank you so much for the video!👍👍👍👏👏👏

    @user-ok4ib8sg7m@user-ok4ib8sg7m5 жыл бұрын

  • Beautiful and amazing craft!

    @gr2262@gr22623 жыл бұрын

  • Another beautiful piece of work. VW door cards really need to stay very thin, so it's hard to do anything too amazing with them. This is an elegant, and functional design.

    @vdubjunkie@vdubjunkie2 жыл бұрын

  • I love your videos! Thank you for sharing them. Watching your videos has given me the confidence to try a few things. You are very talented!

    @n9308x@n9308x3 жыл бұрын

  • Thank you very much. This is the exact video i was looking for

    @RodaHathara@RodaHathara4 жыл бұрын

  • I learned a lot of tips from this site I recommend to all who have this passion

    @mariossmarioss1868@mariossmarioss18685 жыл бұрын

  • Шикарно! У Мастера руки из правильного места растут. Всё очень доходчиво.

    @Nitro26ru@Nitro26ru5 жыл бұрын

  • I do upholstery with my grandpa and that you soo much he stitches his panels usually but I really like this was of cutting out and inglueing the design if that's even a word haha

    @OnlythaRealness@OnlythaRealness3 жыл бұрын

  • Beautiful work. I wish I had known this technique when I did my doors, I had to leave the pockets off.

    @drbahb1@drbahb15 жыл бұрын

  • 1. .. Excellent craftsmanship! .. Artistry in the making. .. Signed, a fellow '79 Super Beetle Cabriolet owner.

    @michaelschneider-@michaelschneider-5 жыл бұрын

  • better than the VW factory!

    @GregsGarage@GregsGarage5 жыл бұрын

    • Hello Greg, I really appreciate your kind comment! I am aware you are a passionate man for VW cars!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Hello sorry I am French, thank you for making us discover this art! it's really beautiful, I try to learn for myself courage and thank you for the video: P

    @JamesSaxo@JamesSaxo5 жыл бұрын

  • it's a perfect job

    @vwmotorworks-srilanka1153@vwmotorworks-srilanka11533 жыл бұрын

  • Beautiful! I hope you have children to pass this on. Bravo!

    @1967250s@1967250s5 жыл бұрын

    • I really appreciate your kind remarks!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Thank you!!

    @donngrimes6179@donngrimes6179 Жыл бұрын

  • Excelente trabajo gracias por el tip seguiré pendiente den los vídeos que suba

    @sandrovera9726@sandrovera97264 жыл бұрын

  • Muy buen trabajo maestro

    @juanrivas6048@juanrivas6048 Жыл бұрын

  • Thank you. I appreciate your knowledge

    @user-lk4fn8be5o@user-lk4fn8be5o5 жыл бұрын

    • I have to thank you again for appreciating this video!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Sir, you do exultant work. Watching you is like watching myself. We both strive for perfection. Like myself you would not have it any other way. Beauty comes in many forms like the curves of the female body. Your work is like that. Very refined . There is one request I would ask from you. That is, 'would you please narrate your video' with speech? I think your video's would be much better if you were narrating them. Keep'em coming mate . Thank you for your time showing the world your knowledge.

    @kennedy67951@kennedy679515 жыл бұрын

    • I really appreciate your kind comment! Thanks for the suggestion as well. You are welcome to this channel anytime!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Very nice work!

    @cowlhoods@cowlhoods5 жыл бұрын

    • Thanks so much for appreciating this art craft!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Nailed it

    @encobravaric1760@encobravaric1760 Жыл бұрын

  • Wow what a fantastic job great work you have done :)

    @markloganvw@markloganvw4 жыл бұрын

    • Thanks for watching!

      @Cechaflo@Cechaflo4 жыл бұрын

  • Thanks for showing the procedure you used to customize the door panel. Using your method, I did a similar custom job to the rear hatch on a Kei Van that I imported from Japan.

    @Cyclerosis@Cyclerosis4 жыл бұрын

    • I am so glad these videos are useful! Thanks so much for watching the videos!

      @Cechaflo@Cechaflo4 жыл бұрын

  • Se ve facil y sencillo.. Pero se requiere paciencia y dedicacion.. Eres grande... Maestro 👍👍👍

    @gilldarius@gilldarius5 жыл бұрын

    • Mas que todo paciencia. ¡Muchas gracias por apreciar este video!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Hermoso trabajo!

    @lucaslema8201@lucaslema82015 жыл бұрын

    • ¡Muchas gracias por apreciar este video!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Muito bom. O Sr. É um execelente profissional. Acompanhado sempre se vídeos.

    @aurelinobulcao@aurelinobulcao5 жыл бұрын

    • I really appreciate your kind remarks!

      @Cechaflo@Cechaflo5 жыл бұрын

  • I love it.

    @Salmon_Rush_Die@Salmon_Rush_Die5 жыл бұрын

  • Simplesmente fantástico! 😍

    @karlinhusch@karlinhusch4 жыл бұрын

    • Thanks for kind remarks!

      @Cechaflo@Cechaflo4 жыл бұрын

  • Top. Mestre🙌

    @fernandojunior2343@fernandojunior23433 жыл бұрын

  • Thanks for share...!

    @mdkawserahmed@mdkawserahmed3 жыл бұрын

  • Very good.

    @andereis2@andereis25 жыл бұрын

  • Vei vc é um genio da tapeçaria 👏👏👏

    @rodrigodesa1808@rodrigodesa18085 жыл бұрын

    • Thanks for kind comment!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Grande Maestro, muy buenas tecnicas, Love your work, very professional! Aqui le manda saludos un alumno mas.

    @JoseLopez-vl2ln@JoseLopez-vl2ln5 жыл бұрын

    • ¡Muchas gracias, José, por ver e inspirarte en estos videos!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Ficou lindo,👏

    @elianemsv@elianemsv5 жыл бұрын

    • Thanks for kind remarks!

      @Cechaflo@Cechaflo5 жыл бұрын

  • At the age of 37 now I just bought a second hand sweing machine Seiko sth-8bld for doing my hobby sewing my car- boat upholstery. My job is car mechanic from the age of 12 (second generation my father also). I prefer to sewing something from going out to a club late at night because I love your work. You are my teacher many thanks for all that i 've seen on youtube, words like excellent technician for you is small. I am very sad about what happened on youtube and I can feel you how angry feel. Please find a way to share all your knowledge.

    @pdnutcase@pdnutcase5 жыл бұрын

  • que gran trabajo maestro estaria agradecido de que compartiera las medidas que utilize para hacer los cortes y las tapas y el material de verdad quede facinado con su trabajo

    @vwlover3182@vwlover31825 жыл бұрын

  • Very nice!

    @saab9000black@saab9000black5 жыл бұрын

    • Thanks so much for appreciating this art craft!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Parabéns, me ajudou a entender o processo! Temos pouquíssimo material sobre o assunto no Brasil! Obrigado por compartilhar seus conhecimentos!

    @fabiodesouzaalencar6895@fabiodesouzaalencar68955 жыл бұрын

    • Dear Fabio, Thanks for watching! Shoemakers use these cardboards for insole. Try to find a similar in Brazil. This other video also shows a similar technique: kzhead.info/sun/nb6NZrqhg4hpkmw/bejne.html

      @Cechaflo@Cechaflo5 жыл бұрын

    • If the 'door panel cardboard base is broken' try to use a special cardboard resistant to heat and humidity. Something like Greg used (original material) for his car door panels:kzhead.info/sun/pr2RnrKyeWamq68/bejne.html

      @Cechaflo@Cechaflo5 жыл бұрын

  • Exelente trabajo

    @danydanielpumajulcaanasgo4776@danydanielpumajulcaanasgo47765 жыл бұрын

    • ¡Muchas gracias por apreciar estas artesanías!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Un gran anhelo mío, es poder tener la oportunidad de compartir con usted don César y aprender más de este maravilloso arte, aún soy un novato, pero me gustaría poder llegar a viajar y trabajar con ustedes, bendiciones y muchas gracias

    @Lugh.s@Lugh.s5 жыл бұрын

    • ¡Muchas gracias por su amable comentario! ¡Siempre bienvenido a este canal!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Maestro, exelente trabajo! Tengo un vw fastback del 68 y estuve tratando de hacerle el techo que es igual que el del vocho casi, pero que va!, si tiene algun tutorial o algun dato que me pueda ayudar... De antemano muchas gracias

    @efrainlombardo4077@efrainlombardo40775 жыл бұрын

  • That's just perfect... but just wish I could find glue as good as yours here in England .

    @rustyvdubgarage3053@rustyvdubgarage30535 жыл бұрын

  • Yes I all ways like your vids and 99.9% of the time I learn something which can be something small or big. That's even if I don't think I will but I like to learn now not back when I should have HA HA.. If only I could have that do over anyway thanks Sir.

    @endall6783@endall67835 жыл бұрын

    • Thank you very much for watching these videos! You are welcome anytime!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Hi. Love your videos as always. Would love more details on the pocket please. What are the sew in hooks called please as i can't find them in the uk.

    @catherinebunker5209@catherinebunker520910 ай бұрын

  • Unreal

    @ForPropertyInvestors@ForPropertyInvestors4 жыл бұрын

    • Thanks for watching!

      @Cechaflo@Cechaflo4 жыл бұрын

  • Very nice again :)

    @jon2oo6spb@jon2oo6spb5 жыл бұрын

    • Thanks for appreciating this job!

      @Cechaflo@Cechaflo5 жыл бұрын

  • dobra robota.

    @2003pipi@2003pipi2 жыл бұрын

  • Good 👍👍👍👍

    @martiinbautista5630@martiinbautista56303 жыл бұрын

  • This is fantastic. Thank you. Do you have a video showing more detail on the pocket? I'm guessing I'll need very soft vinyl and very strong elastic??

    @bobwickham6631@bobwickham6631 Жыл бұрын

    • Hopefully you can get a strong elastic strip. Those tire bladders are also useful if you cut it off in strips.

      @Cechaflo@Cechaflo Жыл бұрын

    • @@Cechaflo good idea. Thank you

      @bobwickham6631@bobwickham6631 Жыл бұрын

  • Great work Iam very suprise

    @baghdad-rv8sj@baghdad-rv8sj5 жыл бұрын

    • Thanks for watching the video!

      @Cechaflo@Cechaflo5 жыл бұрын

  • fantastic! would you trim & glue the corners the same way if using fabric instead of vinyl?

    @daos3300@daos33005 ай бұрын

    • Yes, procedures are similar.

      @Cechaflo@Cechaflo5 ай бұрын

  • Hello your video is very helpful iam about 2 build my second pair of door panels last time I used foam this time iam going to use paperboard so my question is how to keep from seeing the door clips under the vinyl after installing the door clips? Any advice is appreciated

    @michaelwools9538@michaelwools95383 жыл бұрын

    • The sample of the video has two layers of cardboard. The first is the base and should be the original thickness. The cut layers on top are distributed and glued down to the cardboard base. In fact the clips will be fastened to the cardboard base holes. To avoid any protrusion on top view the thinner cardboard on top should have a recess on its reverse just enough to house the fastening part of the door clip. If we would upholster a plain design on a VW door panel cardboard, then the clips would go hidden beneath the foam. We should leave a small gap with no glue to let the clip be fastened to the cardboard easily. Hope it helps.

      @Cechaflo@Cechaflo3 жыл бұрын

    • @@Cechaflo I did a couple of samples today and that's one of the ways I did it thank you so much for responding and the knowledge

      @michaelwools9538@michaelwools95383 жыл бұрын

    • @@michaelwools9538 That is great, Michael ! I would recommend you a wet-proof cardboard. Other cardboards warp with humidity. Greg shows in his video the right cardboard:kzhead.info/sun/pr2RnrKyeWamq68/bejne.html ABS material is also advisable. John shows and explains in his video about this material for door panels: kzhead.info/sun/o9l-iaprr3xpd30/bejne.html Best wishes, Cesar

      @Cechaflo@Cechaflo3 жыл бұрын

  • Buena tecnica

    @edwinenriquecarrillojimene2643@edwinenriquecarrillojimene26434 жыл бұрын

    • ¡Muchas gracias por apreciar este trabajo!

      @Cechaflo@Cechaflo4 жыл бұрын

  • The boss

    @amandeepkang4422@amandeepkang44225 жыл бұрын

  • Absolutely stunning! Wow!! I am speechless. I'm about to redue my panels, two questions: What type of glue do you use? What is your panel backing made out of and how thick? Thank you for your time. _j

    @jeffreystarks@jeffreystarks5 жыл бұрын

    • Hello Jeffrey, I have used a 'yellow brushable glue':kzhead.info/sun/opaxlcmym3huhqs/bejne.html You would need to find a similar. It could be weldwood contact cement, petronio's glue, etc. I used a thick cardboard board (shoemakers' material) for this sample. I cannot recommend because it could warp because of heat or humidity. You would need to get the special cardboard for your door panels. I am sending you some useful links to get a much better panel backing: kzhead.info/sun/oZGDo8WSmXeghYE/bejne.html kzhead.info/sun/pr2RnrKyeWamq68/bejne.html www.automotiveinteriors.com/waterproof-cardboard-door-panel-board-cowlboard-p/cowl-dp.htm

      @Cechaflo@Cechaflo5 жыл бұрын

  • Amigo, excelente trabajo.. pregunta.. el material de la tapa a forrar es madera ? O cartón comprimido y cuál es mejor? Saludos

    @cualcambio9154@cualcambio91544 жыл бұрын

    • Ese material es un cartón duro que usan los zapateros para planta de zapatos. Es fuerte, pero no resiste la humedad y llega a torcerse. Lo mejor puede ser el plástico ABS o cartón MDF Greg nos muestra el cartón para los paneles de puertas:kzhead.info/sun/pr2RnrKyeWamq68/bejne.html John nos muestra el plástico ABS para panel de puerta: kzhead.info/sun/o9l-iaprr3xpd30/bejne.html

      @Cechaflo@Cechaflo4 жыл бұрын

  • Increíble! un placer ver todo el proceso! Alguna idea de como se hacían originalmente los relieves con calor? o cómo se podrían replicar con calor DIY? Mi VW es de los 60s y las tapas que llevaban tienen sólo lineas horizontales paralelas, que supongo es un poco más fácil de replicar.

    @cristobalnunez218@cristobalnunez2182 жыл бұрын

    • www.thehogring.com/2016/09/19/watch-clarks-corvair-parts-emboss-door-panels-2/ kzhead.info/sun/jKl9etGDfIlon4U/bejne.html

      @Cechaflo@Cechaflo2 жыл бұрын

    • @@Cechaflo Gracias! Justo lo que buscaba. Esa maquina como la tuya tiene algún nombre especial? Se puede conseguir una así o es creación tuya? No encuentro mucho en internet Saludos!!

      @cristobalnunez218@cristobalnunez2182 жыл бұрын

    • @@cristobalnunez218 La hize utilizando una prensita de parchar/vulcanizar llantas de auto.

      @Cechaflo@Cechaflo2 жыл бұрын

  • Hello, could you please recommend a type of glue for working with synthetic material. What glue do you use in this video? Your work is very beautifull. Thank you for showing this method, I need to redo the panels on my VW Bus it helps me.

    @giniefungi1649@giniefungi16494 жыл бұрын

    • For this project I used the traditional brushable upholstery yellow glue:kzhead.info/sun/opaxlcmym3huhqs/bejne.html

      @Cechaflo@Cechaflo4 жыл бұрын

  • Cesar buen dia el material gris que usas de base como se llama o donde lo consigues... la base cafe creo que es planta tipo celtec pero el gris no se como se llama.... por cierto todo un placer ver tu trabajo, siempre muy bien terminado y cuidado en los detalles.... todos mis respetos!!!! saludos desde leon gto

    @javierleal4821@javierleal48215 жыл бұрын

    • El material gris es un simple 'cartón suave prensado' de 1.3 mm de espesor, que se usa en artes gráficas. Se puede conseguir en tiendas que venden artículos, tales como cartulinas, papel de oficina, plumas, etc. En Office Depot, Lumen, etc. A manera de base utilizé cartón mas duro de 3mm de grosor. Este cartón grueso lo usan los zapateros. ¡Reciba Ud. también un cordial saludo!

      @Cechaflo@Cechaflo5 жыл бұрын

  • ماشاء الله ولا غلطه 👍

    @alm7arby@alm7arby5 жыл бұрын

    • God is the creator!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Cechaflo, how do you ensure the facing leatherette stays in all the grooves, long term? It did not look like contact cement was used. It appeared to be a low tack adhesive since you could reposition the facing material when setting it on the substrate.

    @adeeponion9152@adeeponion91525 жыл бұрын

    • Interesting questions! If you watch carefully the video you would realize I have used some 'tips' to make the 'channel shapes' last long. 1. The 'stretchy side of vinyl' is in vertical direction of horizontal channels...that way, it easier enter into the grooves...in other words it should not be forced. 2. The vinyl was just placed in a soft way over the panel to let it slide into the grooves. 3. The stitcking process has also much to do. I first liberally applied a coat of glue over the 'cardboard channels' (just the channels) as a primer. I did the same with vinyl material. After letting them dry I applied a thorough coat of glue.

      @Cechaflo@Cechaflo5 жыл бұрын

  • Waterproof door card stock? Was it just an extra layer of same card stock for your raised embossed areas?

    @johnhicks7589@johnhicks75892 жыл бұрын

  • Que bien maestro una pregunta que material le puso enmedio para dar la forma?

    @victorlopez4873@victorlopez48735 жыл бұрын

    • Es 'cartón suave prensado' de 1.3 mm de espesor que se usa mucho en artes gráficas. Se consigue en las tiendas donde venden artículos de escritorio, tales como cartulinas, lápices, etc.

      @Cechaflo@Cechaflo5 жыл бұрын

    • Muchas gracias

      @victorlopez4873@victorlopez48735 жыл бұрын

  • Of course, you get 2 thumbs up!

    @notgivennotgiven7776@notgivennotgiven77765 жыл бұрын

    • I really apreciate it!

      @Cechaflo@Cechaflo5 жыл бұрын

  • Great tutorial. Does anyone know what material is being cut out? Many thanks

    @markbailey5802@markbailey58025 жыл бұрын

    • Hello mark, it is a kind of cardboard shoemakers use it for shoe's insoles. The thickness is 2.2 mm Same material was used on this video:kzhead.info/sun/nb6NZrqhg4hpkmw/bejne.html Welcome to this channel anytime!

      @Cechaflo@Cechaflo5 жыл бұрын

  • ⁦❤️⁩⁦❤️⁩⁦❤️⁩⁦❤️⁩

    @anasalmla1751@anasalmla17513 жыл бұрын

  • Great job! Do you buy your Vinyl material online or local shop?

    @Boeing767DriverAA@Boeing767DriverAA4 жыл бұрын

    • I purchase it from local upholstery suppliers. If you are in USA, please, check:www.albrightssupply.com/Default.asp

      @Cechaflo@Cechaflo4 жыл бұрын

  • 👍❤

    @user-hh4te3ik3b@user-hh4te3ik3b5 жыл бұрын

  • Been trying to cut the cards on my own, but got the holes wrong. I couldn't find a blueprint of the panels everywhere.

    @arielshtern4125@arielshtern41253 жыл бұрын

  • great work . what foam and # grade of foam you are using in this? . Thank you in advance

    @mikeallen3646@mikeallen36463 ай бұрын

    • I did not use any foam on this project. I used a thin 3 mm thick soft and flexible cardboard instead. Shoemakers use this cardboard for insoles. kzhead.info/sun/fKpuobBxrXOwm4k/bejne.htmlsi=bRS5m-kabn-TC2Bz&t=18 I used the same cardboard on this other door panels: kzhead.info/sun/nb6NZrqhg4hpkmw/bejne.htmlsi=KDU3YVEHTaoQ3Z4i&t=161 Eva high density foam (latex foam) could also be used for door panels: kzhead.info/sun/etWQp9OcgWd_h40/bejne.htmlsi=Vx_UGgeVg_ZlpbTK&t=2526 kzhead.info/sun/ZZF_ftR9e3-tbGw/bejne.htmlsi=k-eQtssHm57XI-hy&t=48

      @Cechaflo@Cechaflo3 ай бұрын

    • thank you so much. and thank you for showing us how to do this@@Cechaflo

      @mikeallen3646@mikeallen36463 ай бұрын

  • 👍.зор.

    @botirrajapov5830@botirrajapov58303 жыл бұрын

  • ojala puedas hacer algun panel de puerta que incluya moldura cromada...

    @javierleal4821@javierleal48215 жыл бұрын

    • Si, muy buena idea. Muchas gracias por la sugerencia.

      @Cechaflo@Cechaflo5 жыл бұрын

  • Igual vc não existem dois

    @tapecariapicoense@tapecariapicoense5 жыл бұрын

  • Hoolla

    @SayadMawdcom@SayadMawdcom3 жыл бұрын

  • what is the recommended material to make door panels?

    @franciscocosta9992@franciscocosta9992 Жыл бұрын

    • A waterproof material (plastic or cardboard) that endures humidity. kzhead.info/sun/o9l-iaprr3xpd30/bejne.html kzhead.info/sun/pr2RnrKyeWamq68/bejne.html

      @Cechaflo@Cechaflo Жыл бұрын

    • Thanks you 🙏

      @franciscocosta9992@franciscocosta9992 Жыл бұрын

  • Добрый день. А что за материал Вы приклеили к фанере.

    @yriybobrik9128@yriybobrik91283 жыл бұрын

    • I used a synthetic material used in the shoemaking industry.

      @Cechaflo@Cechaflo3 жыл бұрын

  • what about Retainer, Door Trim?

    @nashwanabdan3084@nashwanabdan30843 жыл бұрын

    • This panel is a smaller sample than normal VW panels. I did this video only to demonstrate a way to replicate a real VW panel. No problem with the retainers/trim fastener. They could be fastened as it is done on a real panel.

      @Cechaflo@Cechaflo3 жыл бұрын

  • damn your good...

    @_PovertyLabs_@_PovertyLabs_5 жыл бұрын

    • I really appreciate it!

      @Cechaflo@Cechaflo5 жыл бұрын

  • 👍👍👍🤝👏👏👏

    @user-hg2pz7wn9i@user-hg2pz7wn9i8 ай бұрын

  • Can you provide a supplier for the soft pressed cardboard padding?

    @randyprince9913@randyprince99136 ай бұрын

    • I got the paper board from a local supplier here in Mexico. You could get it on internet. www.etsy.com/mx/listing/783628954/plantillas-para-calzado-forro-de-suela

      @Cechaflo@Cechaflo6 ай бұрын

    • Thank you. I only see small pieces. Do you get it door size sheets?

      @randyprince9913@randyprince99136 ай бұрын

    • @@randyprince9913 The sheets I have bought are slightly large. 1 meter wide by 140 meter long. It is mostly used in the shoemaking industry and I have realized they imported this board from China.

      @Cechaflo@Cechaflo6 ай бұрын

    • Thanks. I'll keep looking.

      @randyprince9913@randyprince99136 ай бұрын

  • El material que usa en cartón o espuma

    @danydanielpumajulcaanasgo4776@danydanielpumajulcaanasgo47765 жыл бұрын

    • Para esta muestra usé cartón para plantilla de zapato. Es lo mismo que usé en este video:kzhead.info/sun/nb6NZrqhg4hpkmw/bejne.html Para cartón base en caso de reemplazar el ya existente hay que usar un cartón especial resistente a la humedad y calor. De otro modo se llega a torcer. Buscar un material parecido al original como el que que usa Greg en su video:kzhead.info/sun/pr2RnrKyeWamq68/bejne.html

      @Cechaflo@Cechaflo5 жыл бұрын

  • تمام جيد اليس الكوي الحراري أنجح وأحلى

    @samialmasarani8538@samialmasarani85384 жыл бұрын

    • كيف

      @user-dy7yl3ip8v@user-dy7yl3ip8v4 жыл бұрын

    • كيف الطريقة الحرارية ياليت تفيدنا

      @user-dy7yl3ip8v@user-dy7yl3ip8v4 жыл бұрын

  • ok.

    @antoniomarciodeoliveira5448@antoniomarciodeoliveira54485 жыл бұрын

    • Thanks for watching!

      @Cechaflo@Cechaflo5 жыл бұрын

  • 👍👍👍🤝👏👏👏

    @user-hg2pz7wn9i@user-hg2pz7wn9i8 ай бұрын
KZhead