Making Full Carbon fiber fuel tank in prepreg carbon fibre autoclave Honda monkey R.
Honda Monkey R varbon fiber fuel tank.
First and only one in the world I can find full carbon fibre Honda monkey R !!!!!!!!!
Tank isnt clearcoated yet finish is stil from out mould.
CR1 Easy-Lease Chemical Release Agent
www.easycomposites.eu/easylea...
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre
www.easycomposites.eu/xc110-2...
XC110 416g 2x2 Twill 6k Prepreg Carbon Fibre
www.easycomposites.eu/xc110-4...
R210 Unperforated Prepreg Release Film
www.easycomposites.eu/r210-un...
VB200 Vacuum Bagging Film LFT
www.easycomposites.eu/vb200-v...
BR180 Heavyweight Breather layer Cloth
www.easycomposites.eu/br180-h...
Vacuum Bagging Sealant Tape:
AT200Y-1/8"-1/2"-25' .31cm-1.27cm-7.62M
estore.airtech.lu/at200y-1-8-...
This works also perfect:
ST150 Vacuum Bagging Sealant Tape
www.easycomposites.eu/vacuum-...
TBC2 Through-Bag Connector
www.easycomposites.eu/tbc2-th...
VC200 Quick-Release Vacuum Coupling Set
www.easycomposites.eu/quick-r...
EC4 Compact Composites Vacuum Pump
www.easycomposites.eu/ec4-com...
#composites #diy #carbon #prepreg
#autoclave #xpreg
carbon fiber composite manufacturing.
Fiber glass composite manufacturing.
composite manufacturing process
axalta
Spies hecker
Don't get why posting a video and skipping the trickiest parts of the job..
That's awesome love it
I recommend that your woven should be continue,It is difficult at small curve,but you still can stick third layers to let separate part become
Pure awesome madness
Is it works when don't use a dry carbon, i mean using wet laying carbon method?
How exactly did you seal the tank? I'm about to make a small screen wash tank, which similar to your fuel tank will need sealing to protect against the ethanol/ methanol.
That finish is amazing! The join lines of the cloth are so neat too. It must have been so exciting and a huge relief to de-mould and see it was perfect. So much planning and preparation and I paied off. What finish to you use inside to protect the resin from the fuel?
it's cool.
Love your work. How do you know how many layers to give each part? This is my greatest hurdle- I just never know so end up winging it.
nice job unfortunately I dont have autoclave so I made one for my mt 09 without, what about the material you used for the air holes for the vacuum? I saw you drilled the holes.
Fantastic job ; if whenever you'llmake another please do a video during the bonding process, thanks.
Hi great video. Can I ask about the fuel. Are you planning on putting a barrier on the inside, I would have thought the petrol would eat/dissolve the resin
Nice work, congratulations! How much pressure was used in autoclave?
I would like to find someone to make a cf fuel tank for my motorcycle,which already has one,it can be used as a form. Thanx Ken
Great☺️..+Abo
Brilliant work. Do you know what thickness you went for on the tank? Have you you tested it holding fuel? Fantastic 😊
What is the resin in the prepreg? Is it fuel safe? Today's fuels can soften many of them.
Do you know the original weight of the tank vs the carbon fiber tank?
Waow! Fantastic job!You have a lot of patience :)
excuse me, may i ask? What is the name for the type of carbon you are using?