KZhead
Тәжірибелік нұсқаулар және стиль

How to cut a glass bottle - 8 VIDEO SERIES !!!

CutterMaster
2020 ж. 9 Қаз.
6 330 388 Рет қаралды
Жүктеу

Playlist for all 8 video series
• How to cut a glass bottle
In this video I will show you how to make a spiral cut on a wine bottle. Watch the whole video and follow the steps as shown - Don't forget to wear Gloves, Eye glass protection and a mask for sanding
Below is the list of items you will need to do this
1- Flexible ruler
2- Electric tape
3- X-Acto knife
4- Dremel rotary tool
5- Solder Iron
6- Protective eye glass
7- Gloves
8- Mask
9- Sandpaper
10- Marker
11- Diamond disk for your Dremel rotary tool
Music ---------------------------------------------------------------
Closer by MegaEnx is licensed under a Creative Commons License.
creativecommons.org/licenses/b...
Music provided by Audio Library goo.gl/sM1Qka
Performer ---------------------------------------------------------------
Music by MegaEnx
emil.nordberg@gmail.com
/ megaenx
/ megaenx
/ megaenx
Other Links ---------------------------------------------------------------
Below is a good link for cutting bottles using Solder Iron - I learned most of my techniques from his videos
• Cut a Hole In a Glass ...

Пікірлер

  • Playlist for all 8 videos kzhead.info/channel/PLITa8BK1v-CoT0ANVO7IIRELnmohpgiwJ.html This technique may look a total waste of time to a lot of people because they want the bottle finished as fast as possible. Whats the point of making a bottle every 5 min? Some people ask "Ok, so you cut it, now what you do with it? It is not about what I do with it after i cut it but what I achieved doing it. What you are doing here is called "Meditation". It is a total state of concentration, a training for the mind and soul, thinking about nothing but only what you are doing now. It's to find peace for yourself, and we need that these days (during pandemic). It's to tell yourself, I know it will be a very long journey and I will be spending a lot of time practicing and there will be many many failure to experience. I will break many many bottles, I will get mad, I will be very angry, I will be disappointed, but no matter what happens, I WILL NEVER GIVE UP cause I know someday I will look at something so beautiful that I created and it is priceless to me. I will never sell it cause it's all about me and my abilities and every time i look at it, it will remind me of me and I am proud of me. People also ask "why I am not wearing any gloves"... You won't be needing gloves when you reach that level of concentration and experience. I am a professional glass cutter and I know how to touch glass. The note I have in the beginning of my video is for those who never worked with glass. It is a note to beginners to prevent accidents and injuries so please wear gloves, eye protection and a good dust mask if you are a beginner and never worked with glass. Now a note for Professionals: Wearing gloves while cutting a bottle is like asking a blind man to wear gloves when touching objects. You just disconnected him/her from his/her surrounding world. You need to feel the bottle. I should remind you again, This is NOT a technique to cut a bottle and waist some time. Don't do this if your think "OK, I did it now what I do with it?" Do it to remind yourself of your abilities every time you look at it. When I look at my collection of bottles, each bottle has a story to remind me of, "You cut me and made me do the spiral dance for you" - "you cut me but I couldn't cut you". Thank you for watching and subscribing. I make sure to answer everyone as fast as possible. Please watch my other videos listed below. Take care and stay safe. kzhead.info/channel/PLITa8BK1v-CoT0ANVO7IIRELnmohpgiwJ.html 🙏

    @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • This is as beautiful as your bottle! live in the moment and move away from the fear of being cut. Blessings to you

      @thisdelightfulllife@thisdelightfulllife3 жыл бұрын

    • Loved it as it is. I liked how you set it up, the music and the instructions. The music became white noise while I was zoned in on watching the cracking and how you were doing it. I will be giving this technique a try. Thank you very much for sharing.

      @jamesb7319@jamesb73193 жыл бұрын

    • I'm going to try this simply for the satisfaction of completing it. It's right up my alley. Plus it looks clean and tidy. I don't know why but I just like doing perfectionist type of things that require patience and a steady hand.

      @paulweston8184@paulweston81842 жыл бұрын

    • @@paulweston8184 Great, please share a photo once you are done 👍

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

    • Aahhhh your reason gives so many! And it's pure & simple; basic and rAw. Life is complex, which isn't hard when you go back to basics. Nurture your roots and keep focus centered. Life is for sharing and lived where right Accompanies wrong by nature's design as shown in visual by the word rAw. Each opposite is leaning on the other. The bridge that joins & gives the strength, is where we meet in the middle. Life is about All. .... Thanks for taking the time to share not only how to cut a glass bottle into a spiral , (which is really neat;) but these words in your way. Love it all! Peace

      @simplyraw1369@simplyraw13692 жыл бұрын

  • Let's be honest, 99% of us won't try this ourselves but we watch it to appreciate this man's incredible craftsmanship

    @binorobin@binorobin3 жыл бұрын

    • 🙏🏻🙏🏻🙏🏻 and I appreciate your appreciation

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • One vote from me😄

      @dhomidiaz1394@dhomidiaz13943 жыл бұрын

    • Thank you

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Oh yes ! I wouldnt try it... but am recommending it to fellow glass artists !

      @ashamandapa2160@ashamandapa21603 жыл бұрын

    • I'm in that 99% Appreciate the craftsmanship 💝

      @gayant.piyarathna5784@gayant.piyarathna57843 жыл бұрын

  • I like what you've doing with this bottle and never seen it done like this before. Thanks for sharing.

    @melissastugis38@melissastugis383 жыл бұрын

    • Thanks for watching!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Tried and was actually successful on the first attempt!! Much love everyone digs it

    @dustinhammond1478@dustinhammond14782 жыл бұрын

    • Cool 😎 Can you kindly send me a photo? Love to see it. Light_scape2002@hotmail.com

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • Thank you so much! I have needed to see this technique for many years. I hope it’s as easy as it looks. Thank you, thank you!

    @dianaerickson4485@dianaerickson44853 жыл бұрын

    • You are so welcome!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • I am absolutely amazed at how that hasn't shattered in your hands. Beautiful finish. 😍😍

    @acrylicavenue6056@acrylicavenue60563 жыл бұрын

    • Thank you! 😊

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Because bottle glass is not designed to shatter... the break into shards. Looks great good job.

      @Loading871@Loading8713 жыл бұрын

  • Absolutely amazing! I have never seen this done. I like ur reply to one of ur viewers regarding, keep trying u will break a lot of bottles n want to give up but then the miracle happens n u complete one without it being broken! All things worth while takes work n patience. You have created a masterpiece. Be proud! Thank you for sharing!

    @karyntruitt573@karyntruitt5733 жыл бұрын

    • Thank you very much! Always remember this : You gotta make mistake to learn the right way of doing things. Your best teacher is your last mistake 🙏👍

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • This was just mesmerising watching you do that, don’t think I’ve been that quiet for a long time.Fantastic skill, thank you so much for sharing x

    @iv4kaz@iv4kaz3 жыл бұрын

    • Thank you , you’re so kind 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my mesmerizing videos :) kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • holy damn, I cant believe it ! never thought it would be possible using your method. you well and truely deserve your name, CutterMaster !

    @amiralozse1781@amiralozse17813 жыл бұрын

    • Thank you 🙏🙏🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Brilliant. Watching it was like a retreat into meditation. Thank you for sharing.

    @5bryan1@5bryan13 жыл бұрын

    • Thank you for watching and commenting the video. It is much appreciated Regards

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • This is amazing and I thank you so very much for sharing the process.

    @Prpldy15@Prpldy153 жыл бұрын

    • Glad you enjoyed it! Please subscribe to the channel - Happy holidays and please stay safe

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • This is spectacular! Thank you for sharing how you do this! Of course I have to try it myself!

    @cynthiawulff7831@cynthiawulff78313 жыл бұрын

    • You are so welcome! Let me know if you have any question or need help 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • It's amazing, how something so simple can turn into some thing so beautiful. Thank you for sharing

    @denisenoble4010@denisenoble40103 жыл бұрын

    • You are very welcome :) Thank you for watching and subscribing. Below is the list of my other videos kzhead.info/channel/PLITa8BK1v-CoT0ANVO7IIRELnmohpgiwJ.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • This is absolutely out of world bottle art,cannot thank you enough for showing us your amazing creative skills.This is the best bottle art I have ever seen ,keep up the good work 😊

    @sreeray7719@sreeray77193 жыл бұрын

    • Thank you so much 😀

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Another new video to enjoy kzhead.info/sun/a7yFg7OArqeslaM/bejne.html

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • Absolutely amazing! The effort what you put in is totally worth it. Loved the final output.

    @charithalingam1104@charithalingam11042 жыл бұрын

    • Thank you for watching and subscribing to the channel. 🙏✌️

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

    • Another new video to enjoy kzhead.info/sun/a7yFg7OArqeslaM/bejne.html

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • Thank you youtube recommendation, i've learned something new

    @paulsteward9582@paulsteward95823 жыл бұрын

    • Glad u liked it

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Awsome, amazing work, fabulous job, Clarity, finishing, every thing is perfect💯, you are a amazing artist

    @deepsian4768@deepsian47683 жыл бұрын

    • Thank you so much 🙏🙏🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Your work is absolutely priceless . Keep posting , please .

    @BILLBRAZIL100@BILLBRAZIL1003 жыл бұрын

    • Thank you, I will

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Apna samay ko barbad karna hai to Inka video dekho

      @infoweb007aa@infoweb007aa3 жыл бұрын

  • Brilliant work of art, Fred ! Thanks for sharing !

    @kingboca2002@kingboca20023 жыл бұрын

    • Many thanks!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Omg!! I can’t believe how brilliant your idea with a soldering iron is!!! I’ve been cutting bottles with tile cutter w a diamond blade. But this is so much better now that I’ve moved to the city and have been trying candles! 😫I am definitely going to try this! ❤️

    @melimoo6656@melimoo66563 жыл бұрын

    • Thank you for watching the video. Please subscribe and share the video 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Another new video to enjoy kzhead.info/sun/a7yFg7OArqeslaM/bejne.html

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • This is so great! Thank you for sharing! I have been playing with driftwood and beach glass art for about two years now and I want to make some projects with recycled wine bottles. This is an amazing idea for that! The simplicity of the end result is beautiful on its own. But I'm going to experiment with the driftwood, beach glass and possibly lights. I don't want to overdo it though. Love the flow of this.

    @lisaferington8028@lisaferington80283 жыл бұрын

    • Sounds great! let me know how it turns out :)

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • What a cool project! Thank you for sharing your technique. It will certainly help me for a project I have been wanting to do.

    @travelinalaskan@travelinalaskan3 жыл бұрын

    • Glad it was helpful! Send me a link to see how that worked for you

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Another new video to enjoy kzhead.info/sun/a7yFg7OArqeslaM/bejne.html

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • I regret scrolling past this vid so many times. This was pretty awesome 👏

    @Shyreeta21@Shyreeta213 жыл бұрын

    • Thank you for watching and subscribing 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Wonderful. Not cluttered up with words. I have cases of empty wine bottles. Very inspiring. Cheers!

    @billmartz4290@billmartz42903 жыл бұрын

    • Thank you for watching and subscribing to my channel. Below is a list of my other videos (Much less in length) kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Just discovered your video. I feel like a kid in a candy store! A new craft to try. I love having to focus, being patient and working with my hands. Creative and beautiful work.

    @jeffrp8388@jeffrp83883 жыл бұрын

    • I am glad you like the video 🙏 below is the link to my channel with all videos i made so far. kzhead.info/tools/2-GV0jZOcaO8MKm4wMA5IQ.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • KZhead recommends 70% nonsense, but they recommend 30% good, and this channel is one of that 30%. Great work man!

    @YourSenpaiZoro@YourSenpaiZoro3 жыл бұрын

    • Appreciate that 🙏👍

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @@CutterMasterArt yes, but i appreciate more of your patience and wisdom.🍻🍻

      @YourSenpaiZoro@YourSenpaiZoro3 жыл бұрын

    • I wish to have ur material to cut

      @jijimorano8243@jijimorano82433 жыл бұрын

    • @@YourSenpaiZoro Respect 🙏🙏🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @@jijimorano8243 The list of all materials is under the video. Click "Show More" to see the list

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Давно меня ТАК не удивляли! Восторг! Спасибо.

    @user-tv1vo1dn4x@user-tv1vo1dn4x3 жыл бұрын

    • Спасибо за просмотр. Я рад, что вам понравилось видео. Оставайся в безопасности

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Наши греют феном место надреза, а он паяльником. Не спеша и уверенно.

      @NVeslava@NVeslava3 жыл бұрын

  • Impressive amount of patience, but that looks so delicate I dear not even look at it!

    @TuiCatNZ@TuiCatNZ3 жыл бұрын

    • Thank you for watching :)

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • you mean dare

      @mangle3441@mangle34413 жыл бұрын

  • I am deeply impressed!!! It is beautiful and extremely time consuming, but great art always is. I would like to sand down the edge until it’s completely matt as to get a contrast and accentuate the spiral shape. I think that would be very cool.

    @lillylove3508@lillylove35083 жыл бұрын

    • I am glad you enjoyed the video. Let me know if you have any questions and I will answer them as best as I can. Please share the video if you liked it. 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Another new video to enjoy kzhead.info/sun/a7yFg7OArqeslaM/bejne.html

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • Unbelievable ! I am not even able to cut a bottle into two halves with good results. I am going to try this soldering iron technique. Thanks for sharing! 🙏

    @shripadlale7476@shripadlale74763 жыл бұрын

    • You can do it!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Super!! Thank you for share. God bless you and stay safe.

    @juanc.mendoza632@juanc.mendoza6323 жыл бұрын

    • Thank you! You too!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Una verdadera OBRA MAESTRA.!!! felicitaciones y gran abrazo desde Argentina🇦🇷

    @laDeidad777@laDeidad7773 жыл бұрын

    • Gracias, agradezco tu amabilidad 🙏🙏🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • This is absolutely a brilliant thechnique for a beautiful result.

    @tonixjesse9087@tonixjesse90873 жыл бұрын

    • Thank you! Cheers!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Excellent video. I really appreciate. Thank you so much for sharing this video. Regards and blessings.

    @gemunujayasinghe618@gemunujayasinghe6183 жыл бұрын

    • So nice of you

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Absolutely stunning! It takes a perfectionist to have the patience needed for this work, anyone who does art and craft themselves will understand the length of time it takes and also the need to 'feel' with bare hands. I myself found it fascinating to watch. Liked and subbed. :)

    @jaxlancaster2441@jaxlancaster24413 жыл бұрын

    • Thank you for watching and subscribing to my channel. Lots of gratitude for all the things you mentioned. 🙏 Below is a list of other videos by me. Please take a look kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Another new video to enjoy kzhead.info/sun/a7yFg7OArqeslaM/bejne.html

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

    • You should see the guy who carves ostrich eggs with a Dremel burr tip!!! AMAZING AMAZING WORK AND PATIENCE AND SKILL!!!

      @madelynmazikeen7680@madelynmazikeen7680 Жыл бұрын

    • ​@@madelynmazikeen7680yy

      @samilasamila5912@samilasamila59128 ай бұрын

  • I love it. Making something beautiful out of found objects is so much fun.

    @beksinski@beksinski Жыл бұрын

    • Thank you

      @CutterMasterArt@CutterMasterArt Жыл бұрын

  • I barely have the patience to watch ... no way can I see myself doing this ... so my hat is off to you dude 😎

    @kimmarie6669@kimmarie66692 жыл бұрын

    • Thank you 🙏

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • I had no idea this was a technique for glass cutting! Seeing that crack slowly open up due to the thermal expansion is really amazing.

    @BRUXXUS@BRUXXUS3 жыл бұрын

    • Glad it was helpful!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • CutterMaster you are master of this art. Thank you for sharing your skills. I hope a new generation continue to learn from you and keep this art alive.

    @mosoworks619@mosoworks6193 жыл бұрын

    • Thank you, lots of respect for you 🙏🙏🙏 "In teaching you learn and in learning you teach"

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Very skilled. The world needs skilled people. Hardwork and talent.

    @sg5224@sg5224 Жыл бұрын

    • Thank you 🙏

      @CutterMasterArt@CutterMasterArt Жыл бұрын

  • That is so clever! Such beautiful piece of art. That's a think glass bottler.

    @raul7293@raul72933 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • I didn't believe it at the beginning and I'm not sure I believe it now! All my glass-cutting experiences whether successful or not end with an act of violence! I had no clue you could control the cracking like that! Superb Craftsmanship!!!

    @samTollefson@samTollefson3 жыл бұрын

    • Your best teacher is your last mistake - Patience my friend, have patient :)

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • рииии@@CutterMasterArt щоб:б тобой

      @user-uv1je9do4d@user-uv1je9do4d3 жыл бұрын

  • I wish there was a super like button. I've been making lanterns from recycled metal like, duct work from the dumpster at my old job and I've been trying to figure a way to use recycled glass with them. This is just what the doctor ordered, really precise way to cut whatever shape you want as long as you have patience. Thanks for not keeping this to yourself, you definitely are a master.

    @dustinjenkins1032@dustinjenkins10323 жыл бұрын

    • Thank you very much. As you can see below, I answer everyone. Let me know if you have any questions. I try to help the best I can 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Have you tried packing the score with a conductive substance (powdered graphite/carbon/iron/ununpentium and then just attach electrodes or even better, put it over an induction heater. Cause man, that's so awesome. But there's gotta be a faster way... Cause if I made 1.. My lady would be wanting more.. and I have no time. Lol

      @theodorekafalias8998@theodorekafalias89982 жыл бұрын

    • Awesome 💪👷

      @theodorekafalias8998@theodorekafalias89982 жыл бұрын

    • lol, Make one but don't show her, make more over time and once you have enough, show her only one. Now if she ask for more, you have enough bottle to make her happy. tbh, I really don't think any other technique will give you such a precise cut that doesn't need much sanding. As you can see I am touching the edges (well, not recommended unless you know how to touch glass) and they hardly need any sanding. IMO, the technique you suggested won't work on a spiral or curvature cut but it seem to split fine over flat cut where the score line is just a simple circle. Thank you for watching the video

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • Great work... Love the design and the patience you put in to it....👌

    @melsworld8266@melsworld82663 жыл бұрын

    • Thank you very much!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • I think this man should always wear gloves for safety. This is glass after all. Thanks for posting. 😊😊

    @BlondeExplorer1@BlondeExplorer1 Жыл бұрын

    • Thank you for watching

      @CutterMasterArt@CutterMasterArt Жыл бұрын

    • @@CutterMasterArt You have amazing skills. I appreciate you sharing with us.

      @BlondeExplorer1@BlondeExplorer1 Жыл бұрын

    • @@BlondeExplorer1 thank you very much. You may also like my wood and metal work. They are all on my channel 🙏

      @CutterMasterArt@CutterMasterArt Жыл бұрын

    • @@CutterMasterArt Thank you. I will check those out later today. Be well. 😁😁

      @BlondeExplorer1@BlondeExplorer1 Жыл бұрын

  • My uncle cut bottles,. But just to make glasses. Never thought this was possible - 'spiralling'. This is truly awesome! You'll need the patience of Job. But you've proved it. I think/suppose you need a certain level of thickness/glass.(?) I certainly wouldnt sell this cheaply.

    @anoldtoulon6978@anoldtoulon69783 жыл бұрын

    • To me it is priceless. No eyes in the world enjoys them more than my own eyes

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • I love it, thanks for the idea and explanation 💗

    @angelicaparker7844@angelicaparker78443 жыл бұрын

    • You are so welcome!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Fantastic delicate technique! Thanks for sharing.

    @ruthejimenez@ruthejimenez3 жыл бұрын

    • You are so welcome!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • The second one from the left with the double helix is my favorite. Nice work!

    @StephanBuchin@StephanBuchin3 жыл бұрын

    • They are all special to me but I do agree with you, that is the only one with double helix

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • You are truly amazing ☺️ Your patience and skill are unbelievable And the thing that I liked about the most is that you reply to every single comment that you got,😯 got a sea full of patients 😯😯

    @amritparayangattil173@amritparayangattil1733 жыл бұрын

    • hahaha, you have a lot of patient reading all of them in different languages. Yes, I care about what people think and listen to their suggestions.

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • ☺️

      @amritparayangattil173@amritparayangattil1733 жыл бұрын

    • @@CutterMasterArt me Mumbai Maharashtra me raheta hu

      @jyotimehta4641@jyotimehta46413 жыл бұрын

  • Brilliantly Amazing.. Would love to see more & how to decorates it with.. thank you.

    @kaunisiapa@kaunisiapa3 жыл бұрын

    • Thank you! Will do!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Man! I am deeply impressed! And all that hard work just for YOU, and share it with the world is just heartwarming! Loved it!

    @karigokabui3966@karigokabui39666 ай бұрын

    • Thank you, it is much appreciated 🙏

      @CutterMasterArt@CutterMasterArt6 ай бұрын

  • more than beautiful...can’t say enough. Thank you

    @TieuCoCoVXO@TieuCoCoVXO3 жыл бұрын

    • So nice of you, thank you

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Wow so pretty beautiful awesome work just can't imagine like this Hat's off

    @vandanaparesh3700@vandanaparesh37003 жыл бұрын

    • Thank you so much 😀

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • In this video I show how those bottles are designed before making them - Please subscribe if you like it kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Serious cutting skill! 💕

    @marciasandberg4513@marciasandberg45133 жыл бұрын

    • Thank you, It is much appreciated. I design them first as a 3D model then start making them. Below is the video of design process kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Super super super ❤️👍

      @babykd7295@babykd72953 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Fantastic work! Your patience like an angel has!

    @user-xt7ni8sg8p@user-xt7ni8sg8p2 жыл бұрын

    • Спасибо, я ценю ваш комментарий 🙏

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • this has to be one of the coolest things I've ever seen, I adore glass. I have cut the bottoms off wine bottles ~ but this! WOW. I absolutely love this and wish I had the patience. I know me, I would not be able to do this. But I may have to attempt it. Maybe. Because I need ont of these in my life (smiles) Thank you for this awesome project!

    @pamelagoddessoe6964@pamelagoddessoe69643 жыл бұрын

    • Thank you for watching and subscribing to my channel. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Today is your lucky day good sir, you have been blessed by the almighty algorithm.

    @synth15@synth153 жыл бұрын

    • Indeed

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • That´s Important "I always start from the middle part because that is the thinnest area of the bottle ..." Thanks from Mexico.

    @hectortorres9677@hectortorres96773 жыл бұрын

    • Absolutely! Thank you for watching the video and subscribing to the channel 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • I've taken up bottle cutting as new hobby about a year ago and your video is very helpful thank you

    @anthonybower7810@anthonybower78103 жыл бұрын

    • You are very welcome

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • You can create another piece of art with those cut outs. Totally recycling the bottle. Great art and skill you've got 😊

    @macym57@macym573 жыл бұрын

    • Thank you! Cheers!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • This is a peace of art, I never seen someone to do this kind of thing, a hard work that leaves to a beautiful peace of art, just amazing!

    @kevinorghidan4384@kevinorghidan43843 жыл бұрын

    • Thank you. It is much appreciated

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @@CutterMasterArt 💙 Your work need to be seen and appreciated 💙

      @kevinorghidan4384@kevinorghidan43843 жыл бұрын

    • Thank you 👍

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Simplesmente maravilhoso, adorei . Que trabalho mais lindo !!! Parabéns, Eloete de Florianópolis ,😘❤️🇧🇷

    @eloetepinho7235@eloetepinho72353 жыл бұрын

    • Muito obrigado. Eu realmente aprecio o elogio 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Genial

      @hakimattou7786@hakimattou77863 жыл бұрын

  • Maravilhoso! Wonderful! Congratulations! You are very inteligent! Thanks!

    @celiaborgesfranca@celiaborgesfranca3 жыл бұрын

    • Thank you very much! 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • A very unique technique, love it. keep showing us other arts on bottles. may god bless your talent.

    @bobc.8224@bobc.82243 жыл бұрын

    • Thank you - there are many more videos to watch. You can find them in my channel

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Wow, young man. Beautiful, very interesting to watch you create your art. You have deft hands and lots and lots of patience. Love what you do. Hugs from Sherie Rodrigues from Australia. 😃

    @sherierodrigues1569@sherierodrigues15693 жыл бұрын

    • Thank you so much 😀 - Hugs back at you :)

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Watching the crack follow the heat was very satisfying.

    @manytrickpony695@manytrickpony6953 жыл бұрын

    • Glad you enjoyed it

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @JohnathanK Doe Happy to see you liked the video. Thank you for the compliments, it is much appreciated!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Great instructions. I’m sure it’s not as easy as it looks, but we’ll give it a try 😄. Thank you!

    @donnamealy4877@donnamealy48772 жыл бұрын

    • Thank you, let me know if you need any help

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • AMAZING! I HAVE to try this now. wow. Just wow

    @dreamchaisr1@dreamchaisr13 жыл бұрын

    • Thank you for watching the video. If you enjoyed it please hit the like button :) Below is a list of my other videos (Much less in length) kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Que técnica incrível, muito bom, já estou inscrito.

    @igorsantos2119@igorsantos21193 жыл бұрын

    • Obrigado. Por favor, tome cuidado e fique seguro

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • OMG, it's so beutiful. Good job.

    @hppy_doggy2061@hppy_doggy20613 жыл бұрын

    • Thank you! Cheers!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • That is absolutely outstandingly beautiful

    @fuzziieverlove3015@fuzziieverlove30153 жыл бұрын

    • Thank you :) here is my other videos for you kzhead.info/sun/h6qiltSer5eCe68/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Really well done. Finished product looks great.

    @richardmazzara6242@richardmazzara62423 жыл бұрын

    • Thanks a bunch! 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Muito bom, mostrou como se faz realmente. Parabéns!

    @jonas_jr4050@jonas_jr40503 жыл бұрын

    • Estou feliz que você tenha gostado de assistir. Cuide-se e fique seguro

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Mas que capacidade! Jamais pensei que fosse possível. Maravilhosa habilidade, criatividade, genial!

    @charlesmaverick-im8nd@charlesmaverick-im8nd3 жыл бұрын

    • Estou feliz que você tenha gostado de assistir.

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @@CutterMasterArt pode me dizer que material vc usou para cortar e riscar?

      @nilltuber2806@nilltuber28063 жыл бұрын

    • A lista está abaixo do vídeo. Basta clicar em "Mostrar mais" para ver

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • ART! Pure art! Grats for video!

    @clintonfreitas5474@clintonfreitas54743 жыл бұрын

    • Thank you very much!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Amazing! Would look lovely on display with some red wine in

    @elyk341@elyk3413 жыл бұрын

    • yes, that is another video on my list. oh yes, I am going to do it

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Great work, just one suggest, you can use ice cube to run over the line once you heat the glass, this should crack the glass faster because of the temperature variation.

    @TheDarkOakKnife@TheDarkOakKnife3 жыл бұрын

    • Great tip!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • My only concern would be that if the ice is not applied precisely, it could cause the crack to propagate in undesired directions. Use caution.

      @dpavlina13@dpavlina133 жыл бұрын

    • @@dpavlina13 thats why you should not use ice. A sudden shock gets out of control. If you want to follow heat and ice technique then change the ice with cool water. All you need is a drop of cool water over tip of your finger then place your finger on the hot spot. Repeat this and you will have a more controlled crack 😉

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @@CutterMasterArt What would happen if you put the scored bottle in an oven, starting room temp, slowly raising to high temperatures?

      @MrGhris@MrGhris3 жыл бұрын

    • @@MrGhris Never tried it, I don't think that would crack the bottle.

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Thank you for sharing this beautiful work .... respect

    @Nanoturgot@Nanoturgot3 жыл бұрын

    • Thank you for watching and subscribing to my channel

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • The best YT video ever seen ...

    @pjosh2078@pjosh20782 жыл бұрын

    • well, thank you very much. it is much appreciated my friend 🙏

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • WOW Its look amazing the cutting line moving by heat. You dune great job. 👍👍👍👍👍❤❤

    @bashirshahzad6973@bashirshahzad69733 жыл бұрын

    • Thanks 👍

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Un trabajo hermoso , que ingenio el suyo , dios lo bendiga un saludo muy cordial desde chile 🇨🇱 ... gracias por compartir

    @anyiriartemunoz9321@anyiriartemunoz93213 жыл бұрын

    • Gracias mi amigo. Es muy apreciado

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱

      @mariaangelicaumberlandsepu392@mariaangelicaumberlandsepu3923 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Amazing work.... superb

    @kalasagaryellapu3751@kalasagaryellapu37513 жыл бұрын

    • Thank you! Cheers!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Thank you, may God grant you success - Greetings to you from Egypt

    @user-uf6vf6hz1u@user-uf6vf6hz1u3 жыл бұрын

    • Thank you 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Bonjour Montreal ! Great video I have to get me a Dremel with speed control lol Merci from Toronto

    @livingonadollar2882@livingonadollar28823 жыл бұрын

    • Bonjour from Montreal à vous in Toronto. Merci you, for watching mon video heh. 😊 Below is a list of my other videos (Much less in length) kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Що тут скажеш, золоті руки, а основне витримка!

    @andriykostych6816@andriykostych68163 жыл бұрын

    • Це дуже цінується. Будьте обережні та будьте обережні

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Великолепная идея и исполнение!!!

    @user-oc8gr3eb9u@user-oc8gr3eb9u3 жыл бұрын

    • Спасибо, мой друг, удачного дня и, пожалуйста, будь в безопасности

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @maxartfom а, лохматые, советские времена, это как понять?

      @user-lu6pc2bs6l@user-lu6pc2bs6l3 жыл бұрын

    • @maxartfom Это очень хорошо. Спасибо за информацию.

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @@user-lu6pc2bs6l *значит, что очень давно)*

      @piterpen1292@piterpen12923 жыл бұрын

  • Beautiful result ,thank you for sharing! :)

    @frenchandpinayssimplelifei1174@frenchandpinayssimplelifei11743 жыл бұрын

    • Thank you for watching and subscribing 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • thank you for sharing a wonderful and brilliant art style.

    @bogs23simpleart56@bogs23simpleart563 жыл бұрын

    • Thank you for watching and subscribing. Below is the list of my other videos kzhead.info/channel/PLITa8BK1v-CoT0ANVO7IIRELnmohpgiwJ.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • That was bloody awesome:)

    @mickwinters8484@mickwinters84843 жыл бұрын

    • Thank you for watching and subscribing to my channel. Below is a list of my other videos (Much less in length) kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • wow wow wow. I know lots of time, but clearly well worth it., to make an impossible idea a reality.

    @maryjaneevadiamond6359@maryjaneevadiamond63593 жыл бұрын

    • Nothing is Impossible. Impossible means we haven't found the solution yet :)

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • You are so right Maryjane. Even if it takes a few attempts to get it right

      @dethcreeper69@dethcreeper693 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • I'm afraid I don't have the patience any more but love watching.

    @bicklebutterworth142@bicklebutterworth1422 жыл бұрын

    • Thank you for watching and subscribing- Happy new year

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • Very cool! I want to try it but for sure will be wearing safety glasses and cut gloves.

    @joeblow4639@joeblow46392 жыл бұрын

    • Glad you liked it

      @CutterMasterArt@CutterMasterArt2 жыл бұрын

  • a very genius idea, indeed at the moment there are a lot of creative people👍👍

    @ADMANO_Kreatif@ADMANO_Kreatif3 жыл бұрын

    • Many many thanks

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • A bit stunned you are doing it with out gloves of any sort. Having worked around glass somewhat in my past, I learned over time to use the gloves. Ugh, how I hated it when I got tiny shards stuck in my hands.

    @nanettesage1112@nanettesage11123 жыл бұрын

    • with fragile pieces like that , gloves will make you not have a very good feel of how much pressure you apply.

      @atom-xgaming7507@atom-xgaming75073 жыл бұрын

    • Something I always wanted to explain but felt I shouldn't because viewers won't understand it until they try themselves. However; she is right also, I should have had gloves when removing the broken pieces. That was my mistake. I made another video and on that one i have my gloves when working with separated pieces. Thank you to both of you for your comments. Have a wonderful Happy New Year. Please stay safe 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • @@CutterMasterArt i am afraid i concur, beautifully done, but i shuddered when i saw you wernt wearing gloves? you were at least using safety glasses?

      @alastairleith249@alastairleith2493 жыл бұрын

    • @@alastairleith249 yes i always wear eye protection and mask. I also wear gloves on my other videos . Happy new year 🥳

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Amazing!! Such a clean, presise job! 😍

    @LucyMahala@LucyMahala3 жыл бұрын

    • Thank you! 😊

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Beautiful expertise of cutting a glass bottle

    @sheikhasif6346@sheikhasif63463 жыл бұрын

    • Thank you! Cheers!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • Thank you for watching and subscribing. Below is a list of my other videos kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Truely beautiful work of art. Thank you for teaching & sharing. Would be trying to make one🤓😍

    @marzyehayoubi487@marzyehayoubi4873 жыл бұрын

    • Thank you. Please take a photo and share the results 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

    • CutterMaster -- Glass bottle Cutting - My other videos 🙏 kzhead.info/sun/pJZqgMuosJWXlY0/bejne.html kzhead.info/sun/d8mch8Nohmd-oa8/bejne.html kzhead.info/sun/d5WIlKuQkKOveGw/bejne.html kzhead.info/sun/Zb2ifNGkqqZ-hH0/bejne.html

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • The end product is worth all of the effort so thanks for uploading the video, you're a very talented and innovative artist. Is it possible to wrap the bottle in a heating pad for a few hours and letting it sit instead of using the soldering gun to see if that would induce the scoring to crack on it's own, or speed up the cracking with the soldering gun?

    @rwfrench66GenX@rwfrench66GenX3 жыл бұрын

    • Thank you for all your compliments, I really appreciate it. The question you are asking has been answered over 100 times here. I have been practising with different techniques over time and to be honest with you this one was the best technique I found that worked for my designs, However; there are always an issue with every technique. This method is the best because you guide the cutting by changing the direction of the solder iron. What I found was that, in order to start the initial crack, you need gradual heating and cooling (No sudden changes in temperature) like hot water and cold water. You need to start the crack gradually and everything will be in your control once the crack starts to show up. To start the initial crack you need to consider glass thickness, Soldering iron temperature, how much time you apply the heat, how to cool the spot down so the glass doesn't break suddenly and so on... There are a lot of factors involved and you only achieve that by doing experiment yourself and learn the correct timing for everything you do. Yes, glass is that sensitive. Anyway, It will take sometime before you have your first perfect bottle made and once it is made there are no guarantee that next bottle will also be perfect. It's all the about practising and having patience. Rushing the procedure is the worst thing you could do and you have to stop thinking of ways to speed the process up. It just won't work, glass has it's own mind and you have to follow it's rules. I hope I answered your question the best way I could. Best regards, Happy new year and please stay safe 🙏

      @CutterMasterArt@CutterMasterArt3 жыл бұрын

  • Love the details thank you ❤ inspired me

    @crazybutts562@crazybutts5623 жыл бұрын

    • You are so welcome!

      @CutterMasterArt@CutterMasterArt3 жыл бұрын
KZhead