Mag Drill Comparison; Can an Inexpensive Mag Drill Hang with a Slugger That Costs Over 4x as Much?
2023 ж. 19 Сәу.
20 152 Рет қаралды
Try this promo code VVSALE5, or register an account and save a lot more!
Vevor Mag Drill 8850 (tested) --- s.vevor.com/bfQeyI
Adapter for Nitto One Touch to Weldon 3/4 --- amzn.to/45tMtFP
Alternative Vevor Mag Drill **non variable speed** that is even less expensive!! --- s.vevor.com/bfQeyU
I tested a Vevor 8850 Magnetic Drill to a Feit Slugger 206 and assigned points for competition between the 2. The results are surprising!
@vevor.official
#tools #toolreview
Great video, thanks! Finally one normal guy just talking straight to the point and no 17 minutes nonsense of trying to be cool and funny. Thanks for that. Some people complained about the drill chuck for classic drill bits wobbling. Did you have that issue? I will need to drill couple accurate holes on my project so I would appreciate your opinion on that. Thanks and God bless.
Mine is tight, but I do worry the coupler will eventually get loose. So far so good with mine though.
The max depth of the drill and the motor longevity - reliability would be the biggest concern for me. It would not bother me if some of the wiring or buttons etc on the vevor need repairs over time vs more expensive mag drills as long as the motor lasts a reasonable period of time before burning up or melting etc. even if the vevor lasts 1/2 the time your still better off w vevor because it’s 20-30% of the cost of the other ones I’ve compared
I really like that mag drill. I use it primarily now, and keep my tapmatic on the slugger.
Great to see a honest review.
Thank you!
Maybe you could do a "long haul" test, where you cut something big & monitor motor temperatures. Maybe a drill hits a plateu temp, or just keeps climbing, indicating that if you use it too hard it will eventually melt down. For that, or your drilling speed tests (not rpm), maybe a pully stuck to the handles with a rope & weight for a constant consistent applied force.
Those are some great ideas!
New into fab work got my first welder and evolution saw, got myself a vevor I’m excited for $220 it’s a steal in comparison especially someone new to this, I’m sure down the road I’d want something that can cut bigger holes etc but for now I think it’ll be great I think it held it’s ground really good against that slugger for its money. Hougen seems like an awesome machine too, I’ve used hub oil before to cut with on regular drill bits and works great
Awesome! Best of luck with your adventure!
Cool video. I would have given the point to the slugger in the annular cutter test because you can clearly hear the Vevor bogging down badly when cutting through that steel whereas the slugger was so effortless. Just because they both did the job doesn't mean one didn't do it better than the other.
Good point. The slugger is way more industrial. But it comes with the sacrifice of weight. I feel like more often than not I use these upside down. LOL
Sending both to Torque Test Channel for a dyno comparison would be interesting and get both your channels more views. What is not measured directly is not known. As for selling the Jancy, I don't sell good tools. That's what my estate sale will be for. Since it's already long paid for itself there is no opportunity lost by keeping it vs. losing that particular capability. The extra height may be an advantage given the height of your Tapmatic and typical use case. Backup is beautiful and the old saying "one is none and two is one" is a military classic for good reason. I avoid being "one deep" on important equipment. If the Vevor fries one day you'll still have immediate backup and no task interruption.
Some very good points there. It would be cool to torque test. The slugger definitely makes more torque, but the question then lies as to which drill can hang on while applying it. It is nice having the slugger set up with the tapmatic ready to go.
Great video, what force gauge are you using?
It’s this one. It’s also a vevor. I’ve had it for a few years now. Good to 1000kg s.vevor.com/bfQvjP
Great video I’m looking into getting the Milwaukee version
I’ve used a lot of different ones, but not the Milwaukee. I would bet it’s pretty good though.
Build quality and robustness are big issues over the long haul. For example, it looks like the wiring from the base unit to the motor on the Slugger is much more resistant to damage than on the Vevor.
That's also a really simple fix if it does fail.
I guess I've never needed a standard chuck in one. I always used these on truck frames and used annular cutters. Up to about 5/8" is pretty cool all the rolling you can use. I was actually looking at getting a vevor off Amazon instead of the higher priced brand name mag drills. Super nice to have when you need it but I don't use one enough to justify a "nice" one. Very cool test thank you
Thank you! I do a lot of drilling a tapping. My Tapmatic actually fits my slugger, so it may just stay attached to it and I'll do everything else with the vevor. If you "sign up" currently the vevor I tested is $369.99 direct from them. s.vevor.com/bfQeyI
@Death Toll Racing I'm gonna have to look into the tapmatic thing too
@@coryridder1937 Tapmatics are a machine shop classic but with some practice it's easy to tap using an ordinary chuck which is done all the time on milling machines (for which Tapmatic was originally designed for production use). Unless you require mobile tapping the money for a larger Tapmatic could go towards a used knee mill if you don't already have one, and milling machines are insanely handy.
That was fun!
It was!
thanks for this nice comparison, you know where this vevor gets built?
I'm sure it's China. I do believe the Slugger is Germany.
The metal has to be relatively thick for the magnet to work properly on the vevor , of coarse it’s the only mag drill I’ve ever used , so I don’t know if the expensive drills are any better
I’ve used a lot of them, and across the board it’s the same with the magnets on thinner material. Stupid science! 😂
One factor that's difficult to check in a quick test is the long term build quality and ruggedness. I would not be surprised if the Slugger was built beefier. Another big factor is parts availability. Who's parts can one get fastest?
What about the reverse function on the Vevor ? Nice for tapping.
I actually can’t remember off the top of my head. I use a tapmatic in the slugger for tapping. It’s pretty much all I use the slugger for any more. Only problem is they are unjustifiable in price for diy guys like me unless you come across one at an auction or ???
Hi, the Slugger JCM 206 comes with Memory Function speed storage. To reactivate your last reduced speed just press the slow button and Motor on button simultaniously. and the last slow speed is reactivated. Try it!
I just got schooled on my Slugger Mag Drill #tools #toolreview #mechanic #fabrication #welder
I wonder if you can replace the odd ball tool holder with a straight morse taper shank.
You can adapt to the straight 3/4. There’s a link to it in the description of the video.
It is actually a Japanese holder (or clone) that is used in expensive high end equipment. It might get more common.
IMO, since 7-5/8 is 145% of 5-1/4, I think the slugger should get 1.45 points for chuck height…
That's a good point. Chuck height is important, and is probably the biggest downfall to the vevor. I currently have the slugger set up with a tapmatic and just keep it on there now. It wouldn't be an option on the vevor (or at least the tapmatic I have wouldn't) due to height restriction.
The issue with the Vevor is that turning the speed down is reducing the torque because it's just reducing the motor voltage. Half the speed, half the torque. This is exactly the opposite how it should be operated. The correct way to reduce the speed is to gear it down. Half the speed, twice the torque. You put a larger drill in the Vevor, turn it down and now the larger drill is running at half power. The Slugger does this correctly with the gearbox. If the Vevor had a low speed selection with gear reduction it would be a great drill.
I agree. I do like how light the vevor is though since I often use them upside down. The lack of gearbox is helpful in that regard. The slugger is hands down a more industrial drill, but there’s definitely a place for the vevor.
Ullll😅l
For 33yrs in heavy industrial welding and fabrication I’ve used Milwaukee and Hougan drills a lot. They seem to use the same way to slow them down and they work great. It doesn’t take a lot of pressure to use mag drills effectively. They cut pretty quickly essentially through 1/2” or less
@@shannonsmith8004 very true
All that really matters is which one holds up to daily use.
I thought I was pretty clear, but if you use a mag drill daily, the slugger is worth the money. If you can’t justify the money because you use it seldom, the vevor is a great option.
Gear reduction… yeah that is sweet
it is for sure.
Without a doubt, no a cheaper mag mount doesn't come close to a slugger. I used one for drill holes in a Mack frame, then I used a Milwaukee mag mount. It was so lose, no comparison. The slugger was so precise even mounted horizontal.
I own both. I actually use the vevor more. It’s light and it works. My slugger has a tap matic in it now, so I just switch back and forth
Honestly nitto aren't that hard to find most industrial suppliers have them there are adapters for weldon honestly I hate the weldon style bits they are junk compared to the nitto bits also find standard annular cutters jamb up way easier with chips and break bits the slugger style honestly I wouldn't run it any bigger then 2 inches
I haven’t been around the Nitto bits enough for an honest longevity claim. So far I like them though.
I don’t necessarily agree that weight should be factor. Seems like cheaper materials and cheaper motors will make the lesser quality machine always get that point in a head to head.
I think you missed my assessment of “industrial vs hobbiest”
Can we get an honest review from you too？We are very looking forward to😄
On what product?
@@DeathTollRacing MIG130, this is our best seller, great for beginners and light metal😄
you like vevor (made in china), i take slugger (fein?) last 5x longer, and who needs rpm? torgue matters
There’s a place for both. I think you skipped that part
4 minutes in you explained why i would never buy this unit.
Perfect!
Not even remotely close to the correct adapter! Weldon 3/4" male to 1 1/4" weldon female??? That's wasted money...😒
Stupid Amazon. Yeah, that link was wrong. Even if I go through my purchase it sends to that adapter. I fixed the link to another one.
The test here is almost useless.
key word "almost"
Hold on there…. I have a variable speed drill mag drill… they have a constant torque …. When I dial the speed down, put a load on it… it starts drawing more amps to maintain torque… I know this because if I immediately remove load the motor revs and then settles down to speed setting again…. This is why these motors have to have thermal protection because at low speed settings the amperage draw increases substantially under load creating heat… but the power remains.
Yes, I wasn’t clear, that’s how the slugger is, but the vevor not. At least not well. The slugger also has a gear reduction.
UH BASE PLATE OR TABLE THICKNESS IS MUCHO IMPORTANTE, 1/2 PLATE WILL WORK BRAVO
Cool