Full Updated Interior for the LS Swapped K10 Squarebody! - 1987 Chevy K10 Truck Ep. 4
Like what we're wearing? Grab yourself some merch!
Salvage to Savage Gear:
www.salvagetosavage.com/shop/
Want to see some more cool builds, daily posts & giveaways? follow us on IG!
@SalvagetoSavage
------------------------------------------------------------------------------------------------------------------
This week we're getting the lifted K10 squaredbody back out on the road! We get under the hood to finish out our 6.0 LS swap with a cold air intake, and make some adjustments to our retro Holley valve covers. With a little cutting they can fit nicely with all of our ICT billet accessory brackets. With the engine bay all taken care of, we get the truck up on the lift to make some modifications to our shift linkage. With a stock column and a new 4L80 transmission, we had to make some tweaks to be able to get the shifter through the full range of motion. While we were under the truck, we pulled apart our rear differential and traded out the Detroit locker for something a little more mild, so the truck is more comfortable taking turns on the street. We also threw in our new driveshafts so this truck could finally hit the road again. Before we took it down the street, we had to get our brand new TMI interior put in this squarebody. We laid down some restomod sound deadener and a fresh carpet as a foundation for the modern leather bench seat. Once we had our seat and belts installed, we bolted on our matching door panels and dash pad, and took this truck out for its first shake down. This 6.0 LS swapped Chevy K10 drove like a dream! Our RTX gauges worked like a charm; showing all of our motor metrics in the proper operating ranges. The new differential made it more enjoyable turning corners, and our new rear gear set made traveling at higher speeds with our 38" tires no problem at all. We know we told y'all we'd be taking this truck out in the mud. AND WE WILL! We just have to wait for our matching front differential gears to come in so we can have a working 4 wheel drive. But since this truck is so close to leaving the shop for good; it seemed like a good time to bring in a whole new project! Let us know what you want to see us do to this 1970s GMC Vandura! And check back next week to see what we're doing to keep the patina look without having the van rust away in the south Florida climate!
-----------------------------------------------------------------
In the market for a new interior for you ride? Check out TMI Interiors! There's a reason we keep going back to them time and time again for these restomod builds!
www.tmiproducts.com/
--------------------------------------------------------------------
Want to See More S2S Madness???
Catch the Tesla Swapped C10 Squarebody Hit the Road Again!
• Tesla Swapped C10 Squa...
See the progress we're making on our Twin Turbo LSX Chevelle!
• Custom Twin Turbo Inte...
LS Swapping the DMC12
• LS Swapped Widebody De...
Steering wheel upside down would drive me crazy
Such an easy fix also I don’t know who so many people don’t fix it
I would think an updated steering wheel would be in order
I got used to it and then straightened it out when I swapped out the steering shaft
I always liked the steering wheels from the 88-92 GMs. Miss my 89 1500.
Thought the same thing. It's the small details that matter most.
Beautiful interior. Love how you actually got tires on the truck, not those stupid looking rubber bands on 26" wheels or something.
This truck's meant to go off roading!
same, he kept a truck functional as a truck. not some pavement princess
I miss back when we could just compliment peoples builds without shitting all over other peoples. Just enjoy what you enjoy and stop shitting all over everyone else
@@chriswaynegerlach I know right! How often do you see a truck with 0 cargo? 99% of the time. How often do you see a tahoe/suburban with 9 people inside? Rarely. "Uh but aren't they meant to be functional??" Jeeps never see dirt either lmao so calm down Max and MGM :)
@@maxwelln7296 what does “functional as a truck” mean exactly?
Seeing all those old trucks and cars being saved and reused makes me smile.
Saved is a strong, strong word to use with restomods....
It’s sweet but I honestly think those old springboard bench seats are the most comfortable seats around
For short rides probably. My old worn out 72 f250 bench was my favorite to-date. Still going full modern out of a junk yard when i cam find one.
Well you're wrong lol
No lol, my bench gets uncomfortable very easy in my C10
@@sullythepankake9663 idk about the old Chevy bench seats but my brick nose ford is like sitting on a frikin cloud
Yeah I agree. Even mine with a horse blanket on it as a cover lol is way more comfortable to me than anything else
This is actually the truck I have always wanted. Love to see it!
Really enjoy everything you guys do, your attention to detail and cleanliness are top notch. Thanks for letting us in on the little things at the end of making something driveable. That last 15% usually takes up the most time. Kudos to the videographer as well!
Thank you so much! It always feels like that last stretch of work always takes the longest too! (Probably because we know it's so close to hitting the road)
attention to detail is pretty good, but the steering wheel is upside down
Great choice on those interior upgrades! This Square Body is looking fresh!
We're loving this leather!
Where can I find interior
Love this truck, ive been wanting a locker forever so embarrassing doing 1 tire fire burnouts
I actually owned an 87 one of these in black in highschool in the 90s. Manual trans with glass packs. Looked just like this one. Changed out the gas tank, did speakers ,added a CD player tint. Lots of misc stuff. This brought back memories. Love what you guys did with this. Interior is awesome. This thing should be preserved in a museum. All of them up north rusted out long ago. Somebody really loves this truck to be sinking this much work into it. I enjoyed mine but comparing it to the AT4 I have now it was like a model T with 33s if we’re going to be honest. Lol. In 35 years it’s amazing what has changed. Granted the price of that old 87 wouldn’t cover the tax on a new one but I traveled many states in it. Wouldn’t call it comfortable by todays standards but was alright. God how time flies.
This one definitely has some sentimental value to the owner! We plan on doing a build update and showing it ripping off road once we get some time freed up from our other projects!
Love the quick Public Enemy reference during the speaker explanation.
Just want to say, I absolutely love that you put smaller rims and bigger tires on that. Old trucks don’t look good with these new big rims. Love that you kept it classic
I love these older model chevys my dad had an 88 and 86 over the years and i remember my dad taking me to school in it sometimes. Uncle had a k10.
Love these trucks. So simple to work on. Glad to see people still building them.
We got a whole new k10 project we just launched! You should check that one out too!
We have a 1983 Square Body K10. It needs restored. It sat for 11 years. I want to do this same exact thing to it. I’m in love with this truck.
these trucks are so beautiful. nice work saving this one and keeping it true to its roots
Glad you like it!!
I got my 1982 K5 when I turned 30..well in to raising kids and trying to make enough to get by..we barley did most of the time but we never begged or got assistance to pay bills ect. Seeing this trucks makeover brings me to tears and makes me wonder if it was worth keeping it from someone with money to be able to treat it rite..im happy I never gave e it away..it still has a long way to go. I will probably run out of time before the K5. I loved your vid..thanks
The truck sounds amazing and that interior is lit🔥
It came together so well! The only thing left to do is rip it off road!
It's so cool that you guys manage to cram so much into a video that's only 16 minutes & 37 seconds long, yet none of it's boring!
We try our best! Thanks for all your support!
Saw 8gv0g000
there aint nothing basic about this LS swap! Andrew is a Stud!
To protect an extra fuel filter under the chassis of my sleeper Volvo (5 cyl Turbo)..i used a triangular stainless steel pasta 'drainer' i found at a pro kitchen appliance store..when I saw it , I knew it had the perfect triangle shape & size I was looking for to fit perfectly in that spot..if you go to these stores ,many stainless kitchen & cooking ustensiles could be used when doing a vehicle build..!!..love how you guys find ideas to fix & create better parts..greets from France..
Absolutely gorgeous!!
Thank you! 😊
The truck is turning out so badass. And what better truck to customize than a square body! Loving this build guys and that interior is awesome, a lot more modern feel I'm sure. Also can't wait to see what's in store for the van, anything you guys touch turns out amazing so I can only imagine at this point. Van Life lol. Keep up the awesome work and I'm already looking forward to the next S2S video!
Thanks for all the support Kenny! Any suggestions for the van? We're trying to cook up some cool ideas!
There is so many possibilities with a van lol. Would be cool to see alot of power, do a upgraded V8, trans, and rear end swap if you keep it 2wd. Maybe a chopped top? Big sound system? Chill pad in the back for shows? Make a slam van out of it lol. I know you guys have a few lowered builds already, but there's also the option of an off-road build, give it a lift and 4x4 conversion, with some big tires. Either way it's gotta have a LS swap lol. I know whatever you guys come up with is gonna be awesome.
Very nice and now its time to take care of the steering issues!!🤠👍
That interior is 🔥🔥
This. This is what my dream truck is to a freaking T I’ve had it in my head for years
I wish i could afford to have you guys give my 66 f100 shortbed that same treatment! Take care guys, hope your week is going good!
You should check out our F100 playlist! We did a complete frame off build on a 1973 ranger on the channel!
5 seconds into the video and I already know it's gonna be good.
Beautiful engine setup and everything to be putting hose water in...
Man wish I could bring mine out and have yall redo it. Really nice job!!
Maybe one day! We love working on these squarebodies!
Inspiration for my 79 Sierra Grande ¾ ton. Interior upgrade like that looks minty fresh.
Go for it! We love these interiors from TMI! Check out the one we did in the F100 too!
Curious about the dash if the area above the bezel has separated on you yet? Mine looks as though the glue has let loose and the vinyl is coming away from the fiberglass. The vinyl looks bubbled
awesome job all! 🖤🖤 i can’t wait for the van build!
We're putting a mini fridge and a bed back there so Kyle has a place to nap at car shows!
@@SalvagetoSavage yess! we all know the fridge is the most important part bc he can get a nap in anywhere.
Rad truck, spot on conversion. That interior and system is mint.
Thank you! Glad you like it!
Look into the crossover steering modification for these square bodies. It will really help with the steering being all over the place. Truck looks great!
All my lifted squares get XOver
Wow well thought out and quilty work👍
Those seats are pro af
That steering play while driving straight!! Lifted life....haha!
It’s not done correctly. Shouldn’t be that much play in the steering.
It's Van-tastic!! I can't wait to see what you guys do to this one...👍👍👍
We got some plans in mind for it, but would love to know what y'all would like to see done to it!
@@SalvagetoSavage my thoughts are keep it original on the outside (keep the jelly bean style wheels etc.) but give the inside similar treatment to the square body. In the rear I think you should go with a minimalistic living quarters, nothing to fancy, just somewhere you wouldn't mind crashing out for a night or two. and give her some modern LS power for reliability. Option B would be 4x4 LS conversion with a nice lift kit.....that thing would look crazy cool. Nudge bar on the front, mount a heap of lights on that and the roof......man, so much you could do with this, and with the skills your shop has, the options are limitless. Its definitely a cool van! looking forward to this build! Another subscriber from across the pond in Australia.
So miss my square body, 76 3/4 ton Camper Special. 400 cu inch.
A sweet build! proud of you'll!
Thanks so much for all the support!
Those axles are really going to like the new power and gearing.🤯
Y'all havin' some fun. Love it. K10 looks sweet. Hi from Perth, Western Australia
Love to see you guys watching across the water! Thanks for the support!
lol. The interior was actually one of the things I liked most about those trucks
Freakin Awesome!! Love this truck build!!!
Glad you like it!!!
Those TMI interiors are excellent!! Comfy, great looking,,,,.
They hold up to abuse pretty well too! That's why we threw it in a truck we know would be getting dirty!
@@SalvagetoSavage - I have the buckets with the original style console in a 67 C10. Beats that old bench seat that was in there! Also dismantled them a little and added heat to the backs and seat bottoms. You would never know they were apart and here in Alberta, Canada they are nice during the spring and fall cruises and trips. It gets driven almost daily, rain or shine, but no snow or ice (which means salt!!!). It is parked from November until about now, depending on the weather.
I know I am repeating myself but I like what you guys do.... a lot!
Feel free to repeat yourself as much as you want! We love the support. Thank you so much!
Interior is gorgeous!
thank you!
Truck looks & sounds fantastic!! (Don’t forget to flip the steering wheel 180) 😉
Hopefully it gets replaced
The steering looks very loose, I upgraded my 91 keep to a one ton heim joint Parallel bar steering. Tightened it up nice
The center console is nice!
TMI makes a killer interior!
The lower center console is perfect I totally agree!
I really Love this Truck. You guys are very good at what you do
Wow, thanks! We're glad you like the build!
Awesome video guy's. The K10 customer is dropping some serious coin but the truck is looking fantastic. That upside down steering wheel has got to be updated ASAP. LOL!!!! Keep up the great work!
Yo!! Been watching you guys since the beginning of the Tesla C10! Wednesdays are always looked forward to over here!
Love to hear that! Thank you for all the support!
tigged in a fitting on the intake, then used a junk ass rubber boot to connect two pieces... mind blowing.
Classy af and Clean
I gotta have those seats for mine....those old door panels would be nice lol...i nearly have the same truck except R10 model n still the orignal bkue
can i call dibs on the old door panels lol awesome work guys
Thank you! And I think those panels have already been scavenged
Wow man that interior is kicking ass
Thanks!
No biggie where y'all located at?
Awesome video! Might be too late for the head unit but! For my square body I really wanted a big touch screen but there's really no good place to put it without going completely custom like the EV truck. Untill I came across this Joying 11.6" single Din head unit. The reason I like it is beause you can buy an extention cable and remotely mount the screen, then tuck the rest of the unit in the dash. I was planning on putting the screen over the center vent. The part number is JY-UQS11N4G, joying isn't quite as good as a Kenwood or pioneer but shoulders above most of the overseas brands.
Thanks for the heads up!! There are also a few single din set ups that have a fold out screens as well. We were just trying to keep the interior super simple!
That k1500 is coming along nicely. Looking forward to some off road videos. That van is going to be serious, i know it
This truck makes us want to put the van on a set of 35s!
@@SalvagetoSavage do it!!! I agree with that level of ignorance lol
I justed used the factory 8l80 cable and build a mount for shifter on fire wall. Looks good though
Great video! That truck turned out sicccck. Well done
Glad you liked it!!
I priced out that version of the seats with TMI and they want $3600 and it doesn’t even include the bracket! But the truck looks insane with the work you guys did.
I'm about to order the same color kit with white stitch in my 81 trucks going into paint in a couple weeks. It's getting sprayed white nice and sanitary. Has a fresh turbocharged 454 22×12's on 33's and is for sale after its dyno'd and I get a couple thousand miles on it.
That is a very nice bench seat 👌👍
We ain’t late this week! Let’s get it💪
Right on time Zac! Great to see you back!
I put a Vortec 6 L in my 79 square body. Good choice all around.
That's a damn good looking truck.
Thanks! We love these squarebodies!
Man you guys do awesome work!
Much appreciated!
Love that truck!!! I daily the fire out of that! Even if I had to get a second joy to afford gas lol.
Nice interior, on the axles I wouldn't have spent a dime on halftime axles myself I just did a 14 Volt and a 44 in mine or you could go 14-volt 60 or whatever in the back and just swap the outers on the front
YES
All around awesome truck
Thank you!
Great content, thanks guys!
Glad you enjoyed it!
A-Team Van? Tesla motors? Can’t wait to see next week! Lol
Love it! Turned out awesome
Now we just gotta get it out to the swamp!
That interior looks so mint! Are you guys going to do anything about the steering? seems to either have play in the box or its wandering for some other reason
Rad build man. I like the direction you went. Regarding seat upgrade, do you feel a noticeable difference vs the stock bench? My old bench seat is killing my neck and back so I'm looking towards an upgrade as well.
Definitely a bit more support than the stock seat! They also have bucket seat options that might be even closer to what you're looking for!
This is literally my dream come true I wish I had the funds to have this done to my 96 square body 😫
Just tackle it one small bit at a time!
Best K10 bilt ever love the truck dream truck 💯💯💯💯💯
Glad you like it!!!
that why i use Tejas Steel work LS motor mount for Square Body, motor trans fit oem no mod to do with shifter linkage ;o)
When it comes to GM square bodies, I've always preferred the smaller S10. But, man, this full-size is just a beautiful specimen.
Awesome work, this shop is kick ass! Someday I'll have the extra cash to do this to my k20!
We'll be looking forward to the day it rolls in here! Thanks for all the support!
Here for the squarebody.
She's definitely a good looking squarebody!
Need it aligned now
The wheel 😂😂😂 sick ass truck tho, those gauges are 🔥🔥🔥🔥🔥
How much does it cost to do all of those upgrades? I love the truck looks so sick!!
I miss my Chevy 4x4 😭😭😭😭😭😭😭
Breakfast and S2S......gunna be a good day!!!
Whatcha have for breakfast bud
I hope it's chicken and waffles!
Santiagos Breakfast Burrito(hot) and and a Monster energy drink!!!!
ITS ACUTALLY CALLED A V10 THAT YEAR!
man I love this channel
We love that you love it! Thanks for all the support!
I'd love to hear what is up with the Thunderbird on the rack @ 14:19. I have a similar one and would be stoked to see y'all upgrade and/or restore it.
That one's getting some tasteful work done to update it. It won't be too crazy, but we'll give y'all a peek at that one soon!
really enjoyed this video! you guys did awesome on this k10. is it possible to be able to get a similar set up for my 1984 GMC sierra classic?
Yeah definitely! Check out the TMI website. They have a ton of different styles for a bunch of classic trucks
Very nice that stock driveshaft would have me nervous though.
She’s gorgeous 🤩💯💯💯💯 all them obs easy to work on and can do all modifications That you want no computer and all that crap
Looks and sounds good. Only thing that bothers me is the steering wheel is off by 180 degrees upside down.
I miss my 68 GMC truck so damn much. Would of loooooooved to LS swap that red beauty. Time machine needed 😞
Nice work!!
Thank you! Cheers!
LOVE THIS TRUCK!!!
Glad you like it!
Truck is beast
Thanks!
Awesome build, great editing and production, overall quality video. My dad had one when I was a kid and it just so happens to be the year I was born. I remember we lived in the country and he would set me on his lap and control the peddles while I steered (prob thought I was steering lol) the wheel. That being said, this has now become a dream truck of mine that I will now look into and own one day. Pops is since passed when I was 21 so this would be a great way to cherish his memory. RIP Dad🙏
That's an awesome memory! You should check out the new gold K10 build we're doing. The owner of the truck has a very similar story, which is why he sent it over to use to work on. I think you'd like that series!