Repair Rust Holes in your car. How to weld.
How to weld and Repair Rust Holes in your car using this method which will work on all types of rust holes or rot in your car. Also a quick guide on how to get good results using Mig welding. Step by Step walkthrough on this repair, Any questions please ask me!
Just Launched the Website: mad-4-motors.com/
Other videos you might enjoy:
Rattle can Paint job- www.youtube.com/watch?v=_owAb...
Audi Project-
www.youtube.com/watch?v=IcuvO...
Facebook- / mad4motors
Disclaimer:
Due to factors beyond the control of Mad4Motors, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Mad4Motors assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Mad4Motors, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Mad4Motors.
Thumbs up bro! Love watching your videos and wish you plenty of success with your channel. You got my support all the way! Best of luck with your upcoming videos and always stay safe when you’re working. Can’t wait for new content to post!
The Gospel is 1 Corinthians 15:1-4 👇 👇 kzhead.info/sun/n8abZNyvkJxnbJ8/bejne.html
"This car doesn't actually have an engine. It's heading to the scrap heap." Fucking LOL
Respect. This car is going to the scrap yard and you still did this for your channel. Real gangster you are.
Great videos, well done. I think I'm getting the confidence to do a job on my car after watching a selection of your videos on this topic.
Feel like I'm learning a lot from the couple of videos I've watched of yours. Nice repair. I can't weld nor do I want to, but this is all good stuff worth watching and taking in.
thank for taking the time to help us out, have a great day!
THIS right here is the BEST video I’ve seen on this subject to date. He covers everything from start to finish & explains it super well. Awesome job my friend. 😉😎👍🏻👍🏻
Fantastic, I'm looking to start welding and found that not only amazing but very helpful. I thought it would of had a few bumps in but it looks like it's never been worked on, like new. thanks for taking the time to film your good work and will be looking out for more vides.
The Gospel is 1 Corinthians 15:1-4 👇 👇 kzhead.info/sun/n8abZNyvkJxnbJ8/bejne.html
the guy did a pretty good job ,,,a real metal patch,,,, wish more people saw this...
I think this is the best tutorial. Thank you!
MAte, 3:30 is a killer, chilling after work, checking this video...my hearth stopped. stay safe bro.
Beautiful work. Thanks for sharing your knowledge.
Great job, your videos are all great, keep up the good work!
One of the best videos ever on how to actually repair it fast ,cheap and good 👌🏼
Thanks, I learnt a lot from this 10 min video! Perfectly straight to the point.
Another friggin awesome vid mate, cheers for such a very informative, step by step approach, that all can understand. 🤙🤙🤙🤙🤙
Great tutorial. Clear and simple explanations. Thanks!
Looks amazing. Great job!
You make this look so easy!! Brilliant!!
Finally the right way to eliminate rust that is a fantastic repair 👍
Don't Forget The Other Side Still Bare metal Good Idea to put rust protection
What kind of rust protection is good for the other side?
Yannis you just need primer or paint to protect it from rust
@@mrpanda2655 I'd blast it with some fluid film too, but I'm paranoid about rust.
samsondelighted then spray rust reformer paint
Yannis this is my question too. I’d like to remove side molding on my Land Cruiser, weld the holes and repaint. The Rust Check guy said this could invite rust or rippling over time. I live in the mid-west so lots of salt being thrown around
Always great content bro!
Cheers mate a great no fluff tutorial just what I was after, I've subscribed
Great tips for measuring , thx bro! 🇧🇪😎Bob the Belgian
Really good vids i appreciate them your a skilled geezer n a good teacher i am gratefull to you pal 👍
Awesome job! Thanks for the explanation! Well done! I just came here to look how the hot torch looks like for the animation in my Drift Explanation video! :) (diff welding)
Nice work brother thanks for the videos!
I wish I had the tools and scrap metals so I can do my own repairs. Everything is 5x expensive in the Pacific islands. So for something like this, I'd sand both outer and the inner panel (if I have access) as best as I can, then use epoxy resin like JB weld to seal up the holes. Primer, paint, clearcoat, then polish. Greetings friend, from the tiny islands of Palau.
Great Job and thanks for all the tips,
simple steps and well done top job mate
Great detailed video, going to try this soon
Using the squint method of eye protection at 1:08. Great video. Hoping to do my first bit of welding soon, this is great help.
Awesome straight to the point👍🏼
This fellow tells you how to do this in best way he is grate to follow if doing body work for cars 💯🌏
Insane results, I love it
Great video as always. Top bloke
I'm thinking wow the guy you are doing this for will be amazed... loved the plot twist at the end
Use safey ward and glasses when you work. Your eyes and hand are so skilled to replace. Good work👏
very nice work, thanks for sharing your tricks and skills
Hey thanks
Very well done!
LOL, the ending just killed me. After all that "this car doesn't actually have an engine, it's heading for the scrap heap". LOL
Brilliant piece of welding
Whoa! Very nice work
educational informative! thanks for sharing!
Hey thanks
Great job my friend a hug 👍👍👍
Excellent job !!
Magic work mate
Great video!
Thanks for the info 👏👏👍
Excellent vid..... ur skill levels r top notch.
Thanks sir - great vid
This was fun thanks!
I'm here for the amazing Irish accent too!!!
i'm no expert but seeing how you did it in the video. You have some mad skills and finesse. This convinced me to subscribe to your channel. Although, you have a small library of vids, I hope to see more vids in the future
Thats great, thanks!
OK, great video...love to see it done RIGHT>..nice job buddy!!:) Cheers!
Nice work!
Wow! Many thnx man! Thumbs up!
Thanks, nice short vid:)
Great job, excellent
I think that was good work.👍
Hey mate what do you do to prevent rust on the other side of the patch panel since you cant paint it once its welded in?
Well done!
great job sir..
You are very skilled! 👍👍
Thank you 👍
Good job sir!
It's really a shame that you get so many genius' that seem to know all about everything. 99% of the folks that watch are thankful for you sharing your knowledge. What spare gun and compressor are you using?
Nice repair buddy. Could you do a video on how to set up the paint gun and compressor ready to paint for a beginner please
Im looking for one too
@@sdlivin4907 same here
Can you do a video on how to fix some small surface rust on the exterior of the car? Thanks!
nice job bud :) thumbs up
Great job
Nice job 👍
great job
Thanks for having a go
Hey thanks
Amazing!!
Good job
Nice job
Very nice!
Good job if you lived in the sunny warm California like climate . Up here at the salt belt country that will lass for 1.5 years paint bubbkes then rust will show up again. More work is required to prevent rust.
와 집에서 고치시다니 부럽네요!
Mad respekt fore thie man
Just watched the bonnet and wing video as well. The panel looked great to me. Reading the comments is gas.
Pure genius
Good job.
Bloody good job Mate, Not something I could do as I cant weld to save my life even though I own a welder. Although after watching you I might give it another go. 👍
MrCods lots of welders on KZhead can give you pointers.
lo I've tried :)
Impressed!
Great job! But.....use the angle grinder guard bro!
Why
@@michaeltaylor1553 So grinder doesn't pop into your hand. I didn't use guard and grinder popped into my hand. Some tendons cut.
good job
Great video, what type of welder is it does it require gas
I have a rust hole similar to this in my legacy. How do you prep the backside of the panel to prevent "re-rust"? The spot I have is on the rear fender and not accessible from the back side.
Even though I don't have a grinder, welder or rust. Still a good educational video.
Glad you learned something 👍
Thanks very much.
Bravo!!
excellent
Thanks for uploading. Where do you get the metal from? As in - where can you get the sheet metal for welding in the new pieces?
it is best to get sheet metal from other cars at the junkyard because those have already been zinc plated from the factory and are more corrosion resistant than getting sheet metal from home depot
Excellent repair. what would you do about protecting the bare metal on the inside of the panel where the rust actually came from?
Hi yes I brushed on some etch primer on the inside
Mad4Motors Ok but in my careful opinion that is not nearly enough to protect the bare metal and prevent rusting from the inside out. Rx 5 and Rx 10 would be a start.
Good stuff!
Hey thanks
You made that look ridiculously easy. How annoying is that but thank you for taking the time to upload this extremely detailed video.
Hi you can do it, does take a little patience 👍
Nice vid but how to paint tje backside of the metal? I mean there is probably still some uncovered metal that will rust again
Beau travail
i love the safety squint at 1:07