KZhead

2008 MERCEDES BENZ C350 Making a fiberglass front lip (using EPS foam)

chiquitademivida
2022 ж. 21 Қаз.
182 914 Рет қаралды
Жүктеу

Пікірлер

  • Use to build speaker enclosures the same way 25 years ago made some awsome footwell pods door pods rear boot builds ...messey stinky itchy thank god dont do mess around now 😂

    @scoobysean555@scoobysean55527 күн бұрын

    • Yeah that's the only part i hate about fiberglass, it makes you itch every time you touch it

      @chiquitademivida@chiquitademivida26 күн бұрын

    • @@chiquitademivida some skills you got buddy 👌

      @scoobysean555@scoobysean55526 күн бұрын

    • Thank you👍

      @chiquitademivida@chiquitademivida25 күн бұрын

    • 11

      @DadFou@DadFou22 күн бұрын

    • ​@11chiquitademivida

      @DadFou@DadFou22 күн бұрын

  • at first I thought..... naaaaah.... THEN in the End ... FUCKIN AWESOME JOB !!! 🙂

    @FRITZI999@FRITZI9998 ай бұрын

    • Thank you my friend

      @chiquitademivida@chiquitademivida8 ай бұрын

  • Now this is the video I've been searching for. You saved my lip project!

    @Wrench_Warfare@Wrench_Warfare4 ай бұрын

    • I'm glad, i wish you the best in your project 👍

      @chiquitademivida@chiquitademivida4 ай бұрын

  • Good work, I’m going to be making one for my OBS Chevy in the spring and this really helped understand the steps!

    @jroctizzle@jroctizzle5 ай бұрын

    • Thank you and i wish you success with your project

      @chiquitademivida@chiquitademivida5 ай бұрын

  • I was wandering where you were going with this when you started, but bro that is an outstanding job! A lot of work and attention to detail!! Awesome!!

    @davidwood1429@davidwood142911 ай бұрын

    • Thank you

      @chiquitademivida@chiquitademivida11 ай бұрын

  • nice dude, alot to be learnt from here thanks.

    @InDmand@InDmand Жыл бұрын

    • You're welcome 👍

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Great job man

    @soufianeelhamed9866@soufianeelhamed98669 ай бұрын

    • Thank you

      @chiquitademivida@chiquitademivida9 ай бұрын

  • Beautiful job very nice ❣️🙂 you are amazing with it

    @evelynsalazar6057@evelynsalazar6057 Жыл бұрын

    • Thank you

      @chiquitademivida@chiquitademivida Жыл бұрын

  • We'll done my friend looks great 👍

    @daleaxe1030@daleaxe1030 Жыл бұрын

    • Thank you

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Outstanding work and craftsmanship. Patience and attention to detail. Truly. When is the painted and completion video coming??

    @jaredjackson4664@jaredjackson4664 Жыл бұрын

    • I don't know yet, i'm gonna start working on the side skirts now and after that i'm thinking about wrapping the car

      @chiquitademivida@chiquitademivida Жыл бұрын

    • Nice! Can't wait bro. Truly amazing work again. 👌 Looking forward to the next video.

      @jaredjackson4664@jaredjackson4664 Жыл бұрын

    • Thank you👍

      @chiquitademivida@chiquitademivida Жыл бұрын

  • amazing job

    @TopFire852@TopFire852 Жыл бұрын

    • Thanks

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Hermoso trabajo tienes mucha paciencia

    @fernandoserna9215@fernandoserna921510 ай бұрын

    • Muchas gracias mi amigo y pues no nos queda de otra 😂

      @chiquitademivida@chiquitademivida10 ай бұрын

  • Appreciate the inspiration, I'm building a custom side louvers with my 3d printer they jus don't make em for my vehicle and I wantd to fiberglass them for durability the process uve shown has give me that extra pep I need to feel comfortable continuing if all works out I'm make rear window louvers and that will be epic I'd be the only 2017 ford.... with em 🤣🤣🤣

    @jasonhernandez6291@jasonhernandez6291 Жыл бұрын

    • I'm glad to hear that, i wish you success in your project

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Sou seu fã. Fantástico trabalho

    @erasmopaulo2214@erasmopaulo2214Ай бұрын

    • Thank you👍

      @chiquitademivida@chiquitademivida29 күн бұрын

  • Work os great, but I think lip is to wide it missmatch line of the car. If you made side lips to match wideness Its OK! However U really did a awesome job!

    @lradeeca@lradeeca Жыл бұрын

    • I did it like that because my goal is to make a wide body kit, but that's a good point thank you

      @chiquitademivida@chiquitademivida Жыл бұрын

  • I drive a lancer and I can't ever find lips for the bumper sides that come down. Looking to put lips under just them and leave the middle how it is. Thanks for the inspiration.

    @pjmcd0176@pjmcd0176 Жыл бұрын

    • You're welcome

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Hard work huh? Looks good. It's my next project for my Cadillac ATS.

    @midniter2001@midniter2001 Жыл бұрын

    • Yeah and you just have to have patience because it takes time, i hope everything goes well in your project and don't give up

      @chiquitademivida@chiquitademivida Жыл бұрын

  • This is badass! He should make a mold and sell those puppies for $800 a pop considering it fits a Benz!

    @LburgVAGuy@LburgVAGuy7 күн бұрын

    • Not a bad idea👌

      @chiquitademivida@chiquitademivida3 күн бұрын

  • Needs some side skirts and that diffuser (assuming you also made that) needs to extend out to the whole side of the car so it lowers that rear another inch or two so the whole car is leveled out 😎

    @justinguarino201@justinguarino2019 ай бұрын

    • Yeah i made that diffuser too and side skirts is gonna be my next project, thank you for your advice i will keep it in mind 👍

      @chiquitademivida@chiquitademivida9 ай бұрын

  • 👏 perfect perfect 😎✌🇧🇷

    @garageziguibr@garageziguibr9 ай бұрын

    • Thank you

      @chiquitademivida@chiquitademivida9 ай бұрын

  • 7:30 what is present in that metal container you poured in that plastic bowl ?? 7:41 what is present in those tubes

    @RelaX_Codes@RelaX_Codes7 ай бұрын

    • 7:30 is fiberglass resin 7:41is a hardener for fiberglass resin, when you buy the fiberglass resin is already comes with the hardener

      @chiquitademivida@chiquitademivida6 ай бұрын

  • Absolutely great skills that didn't do the car any good esthetically

    @plinkert22@plinkert2210 ай бұрын

    • Thank you for your comment

      @chiquitademivida@chiquitademivida10 ай бұрын

  • Ebay can also👍

    @peeterjullinen6236@peeterjullinen6236 Жыл бұрын

  • Cara parabéns pelo trabalho muito da ora

    @ciganomemafita6533@ciganomemafita65334 ай бұрын

    • Thank you

      @chiquitademivida@chiquitademivida4 ай бұрын

  • 💪🏾

    @IlIlP74lIlI@IlIlP74lIlI7 ай бұрын

    • 👍

      @chiquitademivida@chiquitademivida7 ай бұрын

  • Enjoyed the video. I've been watching videos on making lip's, spoilers etc. Problem is I don't know how to start and what exactly Is I would need. Would you mind helping me out with a list of things that would help getting started? And where I could probably get fiberglass cloth?

    @Eclipse_XVX@Eclipse_XVX Жыл бұрын

    • Yeah sure, you can buy fiberglass on amazon or ebay, so this is what you need, ( fiberglass chopped strand mat cloth, fiberglass resin, Bondo body filler, chip paint brush, sandpapers, gloves and 3m paint respirator ) now if you wanna make a front bumper lip side skirts or anything, just watch a lot of different videos to get an idea of how you can start your project, that's my advice

      @chiquitademivida@chiquitademivida Жыл бұрын

    • ​@@chiquitademivida thanks very much appreciate the wisdom.

      @Eclipse_XVX@Eclipse_XVX Жыл бұрын

    • @@Eclipse_XVX 👍

      @chiquitademivida@chiquitademivida Жыл бұрын

  • .🔥🔥🔥🔥

    @anasaziz6833@anasaziz6833 Жыл бұрын

  • Que talento

    @josuerodriguez5333@josuerodriguez5333 Жыл бұрын

    • Si verdad? Gracias 🙂

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Buen trabajo, cuánto tiempo te tardaste en hacer ese Spoiler delantero, saludos 👍🇲🇽

    @fibrainnovacion@fibrainnovacion Жыл бұрын

    • Muchas Gracias, me tardé mas o menos como en 8 meses porque no lo hacía todos los dias, solo lo estaba haciendo en mis tiempos libres, pero si uno se enfoca muy bien y lo haces todos los dias, el trabajo talvez lo haces en 2 semanas

      @chiquitademivida@chiquitademivida Жыл бұрын

    • @@chiquitademivida te quedo muy bien, gracias por responder👍🇲🇽

      @fibrainnovacion@fibrainnovacion Жыл бұрын

    • Para eso estamos amigo👍

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Wow this is so amazing I got so many great ideas from this. I've been trying to fabricate custom parts but using that mold release agent and gel to make your own is such a better idea. I just need to look more closely at what all materials you used and where do you get them?

    @jdmchickkustomz9417@jdmchickkustomz9417 Жыл бұрын

    • The fiberglass, PVA release agent, mold release, and the Q-cell filler, i bought all this at Amazon and ebay and the rest of the stuff i bought them at the local store

      @chiquitademivida@chiquitademivida Жыл бұрын

    • @@chiquitademivida okay cool thank you I'm going to try this idea making parts this way. I've tried it several other ways not working too well.

      @jdmchickkustomz9417@jdmchickkustomz9417 Жыл бұрын

    • You're welcome 👍

      @chiquitademivida@chiquitademivida Жыл бұрын

    • Lol from my experience anyone who talks this much never makes it through it's like evil villains in cartoons. Did you make it?

      @729mana@729mana10 ай бұрын

  • how long did it take you to complete the project

    @frederik-philippebibeault1519@frederik-philippebibeault1519 Жыл бұрын

    • Like 8 months because i only worked on this project in my free time

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Hello men, what was the white thing that you spread on the bottom of the bumper?

    @rainmkd1879@rainmkd1879 Жыл бұрын

    • It's called gelcoat, use gelcoat only when you make a fiberglass mold of something, like car parts or anything

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Eso es todo

    @jorgepaulino1957@jorgepaulino1957 Жыл бұрын

    • Eso si 👍

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Esta bacan,solo el color esta chillon,

    @cevallostungurahua2298@cevallostungurahua22985 ай бұрын

    • Gracias, bueno estoy planeando cambiarle el color al carro pero todavia no me decido que color, por eso lo estoy dejando asi como esta, yo se que se ve feo pero ese color es temporal nomas.

      @chiquitademivida@chiquitademivida5 ай бұрын

  • Come lavoro sei stato molto bravo per non sta bene pero niente sull Auto😔

    @MrMsD77@MrMsD77 Жыл бұрын

    • Thank you for your comment

      @chiquitademivida@chiquitademivida Жыл бұрын

  • Hella clean, how’s it holding up so far?

    @Izlijzi@Izlijzi Жыл бұрын

    • Very good so far

      @chiquitademivida@chiquitademivida Жыл бұрын

  • What's the white material?

    @marwanel.laithy2534@marwanel.laithy253411 ай бұрын

    • It's called " Gelcoat " that's the name of the white stuff that i spread on the bottom of the bumper, i don't know if that's what you're talking about

      @chiquitademivida@chiquitademivida11 ай бұрын

  • Could you put the products to see the names

    @yoensyhernandez3348@yoensyhernandez33486 ай бұрын

    • Fiberglass Chopped Strand Mat Cloth, Fiberglass Resin and Hardener, WHITE GELCOAT NO WAX with Hardener, PARTALL FILM #10 (PVA) Mold Release Agent, MOLD RELEASE WAX, DING ALL Q-Cell Filler and Bondo Body Filler. These are all the products that i used

      @chiquitademivida@chiquitademivida6 ай бұрын

  • Ну вот ещё маден ин копут бамперу он сейчас забется грязи

    @user-wi3qn7pn7d@user-wi3qn7pn7d Жыл бұрын

  • Сколько времени ты на это потратил бро?

    @tr_bkma_kent9689@tr_bkma_kent96895 ай бұрын

    • It took me 8 months to complete the project

      @chiquitademivida@chiquitademivida5 ай бұрын

  • Donde radicas , me gustaria mandar hacer un kit para mi troca

    @lukeantonio8263@lukeantonio82634 ай бұрын

    • En norte carolina

      @chiquitademivida@chiquitademivida4 ай бұрын

    • Yo tambien en wilmington North Carolina

      @lukeantonio8263@lukeantonio82633 ай бұрын

  • How much would you charge to make one?

    @lugg79@lugg793 ай бұрын

    • Idk, maybe $200 idk yet, probably i will make one in summer to sell it

      @chiquitademivida@chiquitademivida3 ай бұрын

    • @@chiquitademivida where are you located

      @lugg79@lugg792 ай бұрын

    • I’m in Cali do you have email or phone

      @lugg79@lugg792 ай бұрын

  • I got a set of brand new carbon fiber fenders for your car....

    @zacharytodd5476@zacharytodd54768 ай бұрын

    • I'm looking for a wide body kit fender flares

      @chiquitademivida@chiquitademivida8 ай бұрын

  • No haces para vender me gustaría que me hicieras para mi toyota camry se 2016

    @gsalazar644elprimo2@gsalazar644elprimo2 Жыл бұрын

    • No es mala idea pero para hacerlo tengu que tener el bumper del carro para tomarle las medidas porque cada carro es diferente

      @chiquitademivida@chiquitademivida Жыл бұрын

  • where can i buy

    @Papi3182@Papi3182 Жыл бұрын

    • Well, I need to make a copy so i can sell it

      @chiquitademivida@chiquitademivida Жыл бұрын

  • سلام

    @khanifaramar2842@khanifaramar2842 Жыл бұрын

    • سلام

      @AIR.METALIC@AIR.METALIC Жыл бұрын

  • 😠 ρɾσɱσʂɱ

    @jaycortez9093@jaycortez9093 Жыл бұрын

  • Цвет вообще ни в тему

    @user-kz9ur2qk1e@user-kz9ur2qk1e7 ай бұрын

  • Mucha verga para dejarlo pegado en una paral de parking 👎

    @squeletorraemg8289@squeletorraemg82896 ай бұрын

    • Si lo sé mi amigo pero todavia esta en proceso el proyecto

      @chiquitademivida@chiquitademivida5 ай бұрын

  • Лютый колхоз

    @startact3985@startact398511 ай бұрын

  • Great great job

    @AIR.METALIC@AIR.METALIC Жыл бұрын

    • Thank you

      @chiquitademivida@chiquitademivida Жыл бұрын
KZhead