KZhead

Should I switch from the GAN12 to the GAN14? (solves and thoughts) - Matty Hiroto Inaba from Hawaii

thecubingjedi
2024 ж. 3 Қаң.
12 350 Рет қаралды
Жүктеу

GAN12 UV: Tension 4, Center travel 3, Corner magnets medium, Lube-Gravitas and DNM
GAN14 UV: Tension 2, Center travel 5, Corner magnets 2, Lube-Gravitas
I have been testing the GAN14 ever since I got it 5 months ago. It has so much potential, but it is always hard to change my main. I get faster TPS with the GAN14, and it is really smooth and fluid. I am getting faster times with the 14 recently. I have 3 official competitions coming up in the next 5 weeks. The next step is to test it in competition to see how it performs under pressure. Let's see how it goes!
I am sponsored by:
#triboxjp - store.tribox.com/
#gancube - www.gancube.com/ - Use the code "Matty" for a discount!
#thecubicle - www.thecubicle.com/ - Use the code "JEDI" for a discount!

Пікірлер

  • 0:26 The most satisfying sounds a speedcube has ever made

    @ItsQubic@ItsQubic4 ай бұрын

    • Totally

      @emmanuelmarinliera4738@emmanuelmarinliera47383 ай бұрын

  • Black internals is such a clean look, I'm glad GAN is considering bringing it back, hopefully that one does come to market.

    @malenky4057@malenky40574 ай бұрын

    • I prefer The Primary ones

      @Geniuscuber397@Geniuscuber3974 ай бұрын

    • ​@@Geniuscuber397me too

      @LRGnightmare@LRGnightmare4 ай бұрын

    • @@Geniuscuber397same and it just doesnt look like a maglev flagship without them

      @ThatOneHarry@ThatOneHarry3 ай бұрын

    • @@ThatOneHarryWith black internals, it honestly just feels less quality and just looks like the gan 356 series

      @skellq4385@skellq4385Ай бұрын

  • I recently got the 14 and I have gotten really good times on it! My current settings are 5 for the maglev, 3 for the tension, 3 for the edge magnets, and 2 for the corner magnets. It has the feeling of the 12 but the inside feels a lot more crunchy which I'm honestly a huge fan of. It also has less catching than the 12 and people are complaining about popping when I have never gotten a pop on it in my life. Overall whatever you are more comfortable with.

    @GoofyCuber-dj4tg@GoofyCuber-dj4tg4 ай бұрын

    • Do you recommend gan 14 and better than 12,

      @Nico127.@Nico127.4 ай бұрын

  • the 14 is probably one of the most underrated cube

    @ClockSolver@ClockSolver4 ай бұрын

  • Great video and Love how you put your main settings and how you set them up in the description I HOENSTLY WATCHED THIS LIKE 10 times over!❤😂🎉

    @LKcuber333@LKcuber3333 ай бұрын

  • Big reason I personally never upgraded my gan past the 11mp was because of lack of black internals, I really hope that is brought back

    @worldofcubing8242@worldofcubing82424 ай бұрын

  • Glad you could make it home safely Matty! I think you should use the 14, showing everyone that the 14 is worth using, and It could be the difference of you getting a sub 5 average in comp, and not getting it. Hope you achieve results with it :)

    @CuberCaiden@CuberCaiden4 ай бұрын

  • This man deserves an official sub 5 avg so bad

    @LeDuyBao-ex7fj@LeDuyBao-ex7fj4 ай бұрын

  • hope to see you at san ramon!

    @cuberworld-id9gn@cuberworld-id9gn4 ай бұрын

  • The f2ls on those 3s were insane.

    @ClutchCps@ClutchCps4 ай бұрын

  • Hi Matty! I have a question about the tension settings of GAN cubes since I still find it a bit confusing. Say "tension 4" of your GAN12, does this mean the fourth click away from reset or is it the fourth tension (three clicks)? Thanks!

    @sanpobyampracha2021@sanpobyampracha20214 ай бұрын

  • I didn't realise it had black internals, did you chose that or does it come like that. Btw wth were those wierd sounds it's making did u like cubeheads home lol

    @jjmb4995@jjmb49954 ай бұрын

  • hmm i like how you said the black internals are similar to the gan xs (being probably my favorite gan 3x3 i own)

    @Leonardo-cw1dd@Leonardo-cw1dd4 ай бұрын

  • I see you use the halo timer, but are you also still using cstimer? do you ever just connect the halo timer to cstimer? i do it with the original gan timer and its pretty awesome

    @SSJChar@SSJChar4 ай бұрын

  • Hey there Matty ! Do you think the Gan 12 is still worth buying or it’s better to go for the 14 ?

    @Tito_decorazon7771@Tito_decorazon77713 ай бұрын

  • best solutions in the US🔥🔥🔥

    @teriww@teriww4 ай бұрын

  • Great video!! 🤩🤩 Also, does the black interior of the Gan 14 have a UV coating?

    @3DCubing@3DCubing4 ай бұрын

    • My question exactly

      @SliceMoveOLL@SliceMoveOLL4 ай бұрын

    • No

      @7oclock@7oclock4 ай бұрын

  • For gan 12 setting for tension 4, do you mean after the loud click do you do 3 more clicks or 4 more clicks?

    @user-uc9uq3df5g@user-uc9uq3df5g4 ай бұрын

  • i absoutely agree with you I think people eho use the Gan 14 has light turning style

    @dont_rage_dude@dont_rage_dude4 ай бұрын

  • Those solves in the beginning were so incredible..Also what was that f2l on the 3.58? Without the lockups on the jperm that couldve been like a fullstep 3.2/3.3, looked insane.

    @ghedi4823@ghedi48234 ай бұрын

    • Yeah, the F2L was 13 moves in like 1.1s I think. Edit: It was 14 moves in 1.3s

      @MonneTheMoon@MonneTheMoon4 ай бұрын

    • @@MonneTheMoon Wth. Thats nuts!

      @thecalculatedcreativecoder1428@thecalculatedcreativecoder14284 ай бұрын

    • @@thecalculatedcreativecoder1428 imagine ll or even pll skip on that solve!

      @godzillafirefox923@godzillafirefox9234 ай бұрын

    • B' R D R' F R U R U' R' D R U2 R' r U r' R U R' U' r U' r' L' U' L F L' U' L U L F' L2 U L That's the solution he did. There's even a really obvious 10 move F2L solution lol: D F D' B' R D2 U R U R'

      @JonasPilhoefer@JonasPilhoefer4 ай бұрын

    • @@JonasPilhoefer Yeah, that's just insane!

      @MonneTheMoon@MonneTheMoon4 ай бұрын

  • Any ETA for the black internals? Can’t find any information on it. Planning to buy one

    @BlackShadow2009@BlackShadow20093 ай бұрын

  • Fantastic extra ordinary mind-blowing

    @A1GAMEINGRitik@A1GAMEINGRitik4 ай бұрын

  • wait does the gan 14 have a option for black internals?

    @thealohacuber759@thealohacuber7594 ай бұрын

  • i think gan should release the black internalversion becquse they do make a difference

    @Vihaan912@Vihaan91217 күн бұрын

  • For the gan 14s lube do you use a lot of gravitas or just a small dab?

    @playbunny4490@playbunny44902 ай бұрын

  • 1:08 what is this 1.2 F2L bro

    @MaxSiauwCubing@MaxSiauwCubing4 ай бұрын

    • bruh f2l is only 13 moves wtf

      @GoofyCuber-dj4tg@GoofyCuber-dj4tg4 ай бұрын

    • Lol yes

      @thecubingjedi808@thecubingjedi8084 ай бұрын

  • Wait you using smart Bluetooth timer then typing the times in?

    @21ForEva@21ForEva4 ай бұрын

  • What comps are you going to in the next couple of weeks

    @pandahhh9115@pandahhh91154 ай бұрын

  • Could the differing feels of the black and primary 14's be because of different levels of use? I'm guessing the primary internal cube has more solves on it than the black so it could have a softer feeling because its more worn out?

    @Azzy118@Azzy1184 ай бұрын

    • no, theres a huge difference between my friends gan 11(primary internals) and his brother's gan 11(black internals), they feel different, i think primary feels better but thats just preferance

      @ClockSolver@ClockSolver4 ай бұрын

    • @@ClockSolver Primary internals feels a bit drier but faster, but black internals feels soft but less faster for some reason

      @Usuario01997@Usuario019974 ай бұрын

  • i feel like the gan 12 is still reliable since it has been out for so long and the setup is easy. the only thing is the small lockups but i don’t know if that is fixed in the 14 since i haven’t tested it.

    @jcuber8907@jcuber89074 ай бұрын

    • Bruh who asked you?

      @tbbzeus007@tbbzeus0074 ай бұрын

    • fair @@tbbzeus007

      @jcuber8907@jcuber89074 ай бұрын

    • @@tbbzeus007 who asked if anyone asked?

      @garnerthecube7524@garnerthecube75244 ай бұрын

  • Do you have the Gan 5x5?

    @CuBOYid@CuBOYid4 ай бұрын

  • you should do it !

    @user-bl5lj8ll4y@user-bl5lj8ll4y3 ай бұрын

  • What about your magnet settings?

    @SliceMoveOLL@SliceMoveOLL4 ай бұрын

  • That 3.58 had like 1.1s F2L. How!?

    @MonneTheMoon@MonneTheMoon4 ай бұрын

  • DUDE WHAT KIND OF LUBES DO YOU NEED TO GET THAT SOUND AT 0:58 like my guy thats actually insane 😭

    @REN11603@REN116033 ай бұрын

  • Just my opinion (I've never used a gan cube) I feel like since the 14 has so many combinations, your optimal combination is just hidden within the cube.

    @jamescarter9944@jamescarter99444 ай бұрын

  • Wait howcome the internals are black?

    @FriskyPotat0@FriskyPotat04 ай бұрын

  • Does gan 14 black internal have uv coating?

    @kittulinff3895@kittulinff38954 ай бұрын

    • From the video it looks like it is uv coated

      @mikispazz6597@mikispazz65974 ай бұрын

  • I still main the gane 11 mpro

    @Zetson2952@Zetson29523 ай бұрын

  • can someone help me, I don't know which one should I buy, gan12 or 13

    @namesless69@namesless694 ай бұрын

    • 13

      @escubingchannel@escubingchannel4 ай бұрын

    • No buy 12

      @NotThatCuber@NotThatCuber4 ай бұрын

    • Many people have said gan 12 is better than 13.Me personally I have no idea but I kinda have a sense of how the 12 feels because I have 14.

      @NotThatCuber@NotThatCuber4 ай бұрын

    • @@NotThatCuber tried my friend's gan 12, for me it feels like it just wanna pop out and corner cutting isn't that great, but I love the overalls feelings especially the crunchiness. I'm expecting gan 13 has a better performance than 12 hopefully but many speedcubers said the opposite

      @namesless69@namesless694 ай бұрын

  • Keep practicing and one day you may be nearly as fast as Timon or Max. Keep it up, slugger.

    @MaffeyZilog@MaffeyZilog2 ай бұрын

  • I think you should stick with the gan 12, I feel like you can trust your turning more with it compared to the 14.

    @NoahCubez@NoahCubez4 ай бұрын

  • Still can’t figure out why your tensions pop for me

    @LKcuber333@LKcuber3333 ай бұрын

  • Black internals instantly make a cube faster (trust)

    @gray_listed@gray_listed4 ай бұрын

  • What is it mean TPS ?

    @ibragimxasanov@ibragimxasanov4 ай бұрын

    • Turns per second

      @brentsmith3376@brentsmith33764 ай бұрын

  • Hello Je... W?

    @chiragbhat9702@chiragbhat970217 күн бұрын

  • his tps is god,equal to kyle and yiheng

    @Vihaan912@Vihaan91217 күн бұрын

  • white internal 🤍

    @JpicGames@JpicGames4 ай бұрын

  • Gan 12 looks very locky

    @EpicLitez@EpicLitez4 ай бұрын

  • 1:08 (3.58) is 1.33 F2L lul

    @Stewy-@Stewy-4 ай бұрын

    • fun f2l-1 solution - y B' R D R' F2 R F' D

      @Stewy-@Stewy-4 ай бұрын

    • y B' D F D' R D2 U R U R' heh 10 move f2l

      @Stewy-@Stewy-4 ай бұрын

    • and y2 D L D' R' F D2 y' U R U R' is another 10 move f2l?? woaji

      @Stewy-@Stewy-4 ай бұрын

    • Hey stewy! Thanks for all of your reconstructions.

      @yinyangsepticruski@yinyangsepticruski4 ай бұрын

    • Haha damn

      @thecubingjedi808@thecubingjedi8084 ай бұрын

  • bruh whys ur cube so fast that u can do U4s with a typical U2 strength

    @popcornthequail@popcornthequail4 ай бұрын

  • stay with 12

    @OurLadyofTheCisne@OurLadyofTheCisne2 ай бұрын

  • If yours isnt popping on those settings then we dont have the same cube lmao theres actually no way

    @elliottwilliamson2560@elliottwilliamson25604 ай бұрын

  • Gan 14 just gets a lot of unnecessary hate, like people even say it is the worst cube of all time. Sure, it may be overpriced, but that doesn’t change the fact that it is good. People are just salty

    @skellq4385@skellq4385Ай бұрын

  • Hopefully you can get those times in competition because I want you to be the new world record holder ❤🤍💙 USA number one

    @LRGnightmare@LRGnightmare4 ай бұрын
KZhead