KZhead
Тәжірибелік нұсқаулар және стиль

I didn't believe it myself! A brilliant idea with DRILL

FACIL LH
2024 ж. 1 Нау.
363 475 Рет қаралды
Жүктеу

I didn't believe it myself! A brilliant idea with DRILL
Idea that you can do with a drill and circular saw from home or workshop

Пікірлер

  • Lo felicito usted es un excelente maestro, muy agradecido por su aporte al conocimiento de los aprendices, muchos éxitos

    @rodrigodiez3047@rodrigodiez30472 ай бұрын

  • The thought of what will happen should the chuck loosen up and drop the bowl onto the blade, which is spinning toward you, is enough to make me say that this idea is best left for those with a death wish.

    @bunkie2100@bunkie21002 ай бұрын

    • The dude is missing a finger, gee i wonder how that happened.

      @mikemilnes7093@mikemilnes70932 ай бұрын

    • ​​@@mikemilnes7093I wonder what's next... ¿Another finger or worst?

      @raimundoarce7014@raimundoarce70142 ай бұрын

    • Ну да обжегшись на огне дуют на холодную воду. Бортики станка защитят ваше бренное тело. А душу,? так она у вас и так в пятках, как у трусливого зайца.

      @anutarigaya486@anutarigaya486Ай бұрын

    • And chucks loosen no matter how tight you try to make them.

      @dougblazer1376@dougblazer137629 күн бұрын

    • That's not all. When he was sanding the piece of wood, he didn't lower the saw blade so it was hidden below the table saw. One slip and his hand may have driven into that blade. It's how you lose fingers.

      @JackHaveman52@JackHaveman5217 күн бұрын

  • Muy increíble felicidades

    @user-dp4dr3js7u@user-dp4dr3js7u2 ай бұрын

  • Yo lo tomo como una muy buena pauta para hacer algo que me apasiona. Yo veo el canal por años y para mi es muy bueno y si toma la seguridad en serio. Sus proyectos son super geniales...

    @frankrobertmontevillerpino1409@frankrobertmontevillerpino14092 ай бұрын

    • 🎉 então mas para que serve essa peça que ele fez que eu não entendi

      @luziaparlato3128@luziaparlato31287 күн бұрын

  • Well, I, for one, appreciate the demonstration of the type of woodworking skills that caused the loss of one of your fingers....

    @oldschooldiy3240@oldschooldiy324029 күн бұрын

  • I think it would be a good idea to totally lower the circular saw blade prior to sanding!

    @jonzflicks@jonzflicks2 ай бұрын

  • Que grande maestro

    @casimirozanabria3753@casimirozanabria37532 ай бұрын

  • Hola. El maestro que comparte con nosotros todos estos trucos, es genial. Le agradezco mucho sus programas, sin embargo, y con todo respeto, creo que debía usar los elementos necesarios para su protección. no quisiera que tuviera problemas por el no uso, por ejemplo, de gafas al usar la sierra. Un brazo

    @josefernandomoralesgiraldo8984@josefernandomoralesgiraldo8984Ай бұрын

  • Muito bom mesmo parabéns pelo seu trabalho

    @adilsonteixeira4304@adilsonteixeira430416 күн бұрын

  • Best idea. 👌.

    @keshabchatterjee8708@keshabchatterjee8708Ай бұрын

  • They say there's a fine line between genius and madness...

    @harrylambrianou6998@harrylambrianou6998Ай бұрын

    • absolutely hilarious

      @dalehelmstead2306@dalehelmstead230621 күн бұрын

  • This is some Shop Smith quality jigging there! Love it!

    @ChazzDaGrazze@ChazzDaGrazzeАй бұрын

  • So, is this how you lost your finger?

    @davidbarnett5777@davidbarnett57772 ай бұрын

    • Shake hands with danger!

      @billybones4523@billybones452319 күн бұрын

  • Great way to generate sawdust.

    @billgiles3261@billgiles32612 ай бұрын

    • Для ваших мозгов....

      @anutarigaya486@anutarigaya486Ай бұрын

  • WTF.... you never get to see what this turns out to be???????? BOGUS.

    @IHGChick@IHGChick2 ай бұрын

    • And never get to see him lose another finger!

      @josephpaquette3781@josephpaquette3781Ай бұрын

  • What on earth did he create? And for what purpose? Would it have been safer and more useful to buy a small lathe to do something like this?

    @HHHGeorge@HHHGeorge2 ай бұрын

    • Простите: - но мастер , Вам показал сразу как смастерить станок - согласно Библии он дал вам в руки удочку. Мастер показал как работать на этом станке , то есть показал как поймать рыбу. Как изготовить блюдо для приема пищи и для продажи, то есть приготовил вам ужин и пригласил к столу. Вопрос:- что здесь не понятно? Какие ещё ассоциации может вызвать видео ролик?

      @anutarigaya486@anutarigaya486Ай бұрын

    • @@anutarigaya486 Wordy yet dumb response.

      @caretakerfochr3834@caretakerfochr3834Ай бұрын

    • It's a bowl

      @davidbroadfoot1864@davidbroadfoot1864Ай бұрын

  • Very clever... Thanks a lot...

    @AthSamaras@AthSamaras2 ай бұрын

  • Me interesa mucho

    @sebastianoscarochstadt9245@sebastianoscarochstadt92452 ай бұрын

  • What is the part for ? I fail to understand the purpose of it

    @yvesinformel221@yvesinformel221Ай бұрын

    • It’s for making sawdust!!

      @Martyfartini@MartyfartiniАй бұрын

    • The purpose I suspect is to get you to watch the video.

      @keithwilliams1243@keithwilliams1243Ай бұрын

    • It's a bowl

      @davidbroadfoot1864@davidbroadfoot1864Ай бұрын

  • que buena herramienta usted hace que se vean las cosas fáciles, felicidades quedó excelente, saludos desde Oaxaca, México

    @ponchocisneros8873@ponchocisneros88732 ай бұрын

  • Have you ever considered a course on shop and tool safety?

    @galewollenberg786@galewollenberg786Ай бұрын

  • La ideas puede ser muy buenas pero el riesgo de causar un accidente caseros es seguro 🤔 sera util esta herramientas casera para los que trabajan con la madera oh es pura lampara 🤔🤔🤔❓❓ cuál es la respuesta

    @xavierheras1238@xavierheras12382 ай бұрын

  • I kept thinking, "This seems so dangerous," and then i noticed the missing finger. 😲

    @mikealsegotta7042@mikealsegotta704223 күн бұрын

  • So, unless I've missed something, you've done the same job as a lathe. Why not just set-up the drill to be a lathe?

    @MontyVideo969@MontyVideo969Ай бұрын

  • Crazy invention.

    @mikebond6328@mikebond6328Ай бұрын

  • Everyone is thinking WHY. When you could get a used lathe for a few hundred dollars. VIEWS, PEOPLE LOL. We all watched it, and now he can buy a lathe :)

    @JamesDoylesGarage@JamesDoylesGarage17 күн бұрын

  • Amigo parabéns só que vc esqueceu de passar as medidas do que vc fez. Marcenaria tem início meio e fim.valeu campeão

    @joseeleonealmeida5975@joseeleonealmeida59752 ай бұрын

  • I figured it out!!! This so called "wood worker" is Rube Roldberg!

    @patricksummers4285@patricksummers4285Ай бұрын

  • A mini drill press was so close....but you deviated. How often would I require that shaped wood? Never

    @sunilphalakdhari3869@sunilphalakdhari386915 күн бұрын

  • Con torno sencillo es mucho mas rápido y con un acabado perfecto por que se complica la vida? Yo hago platos con el torno es lo mas sencillo.

    @pablorivero8311@pablorivero83112 ай бұрын

  • That’s pretty cute.

    @larryrobinson08@larryrobinson0825 күн бұрын

  • Shortcuts lead to short fingers and I sure don't trust a drill chuck as much you. I can only assume you are making a bowl but that is a just a guess.

    @jeromejooste3493@jeromejooste349320 күн бұрын

  • Well, that was 12 minutes of my life wasted that I'll never get back.

    @samslade739@samslade7392 ай бұрын

    • Век живи, век учись , в вашем случае все равно дураком помрёшь... Выполнение любой работы своими руками - вне времени... Потому как вас никто насильно не заставлял смотреть это видео до конца.

      @anutarigaya486@anutarigaya486Ай бұрын

    • So, is he making a bowl with his completed jig fixture or just wasting our time???

      @kenyoung976@kenyoung976Ай бұрын

    • Anyone watching this waste of time and thinking it's useful and not dangerous might be the fool. The video doesn't show the finished product, is very dangerous to follow, and of no use to a real woodworker.

      @frankcuoco4273@frankcuoco4273Ай бұрын

    • Yeah reading your post was time I will never get back!

      @TheNewMexicoMan@TheNewMexicoMan28 күн бұрын

    • Waste of time? You need to learn about KZhead fast forward. I only wasted three minutes 😅

      @PinePondCTDevilsHopyard-fy3hj@PinePondCTDevilsHopyard-fy3hj19 күн бұрын

  • Really disappointed there wasn’t any hot glue or duct tape.

    @skipsterz@skipsterzАй бұрын

  • Did go through all that work to have that little router cap like that come on man

    @davidgentz1731@davidgentz1731Ай бұрын

  • Pretty good video. Well done. The idea? Not so much.

    @jamesjohnson8345@jamesjohnson834521 күн бұрын

  • Anyone notice the missing piece of index finger on the left hand?

    @Janderlie13-ik8rc@Janderlie13-ik8rcАй бұрын

  • What could possibly go wrong?

    @michaelkraft6018@michaelkraft60182 ай бұрын

    • Well, if the sandpaper fell from his hand and he caught the spinning wheel in contact with his hand, it could potentially force his hand down to the table saw blade still elevated, looks like a recipe for disaster! Looks like he didn’t see the danger of the saw blade,and you wonder why he lost part of his finger!

      @MjII7@MjII72 ай бұрын

    • It's a birth defect.😂

      @frankcuoco4273@frankcuoco4273Ай бұрын

  • ขั้นตอนฝัน❣️

    @user-ei6np8yj1i@user-ei6np8yj1i2 ай бұрын

    • ฝันร้าย

      @davidbroadfoot1864@davidbroadfoot1864Ай бұрын

  • 'Yo mismo no puedo creelo'...que este hombre haga inventos tan peligrosos... Con todos y cada uno de sus inventos es posible que pierdas una mano o hasta la vida.

    @DiegoNaranjasXD.@DiegoNaranjasXD.2 ай бұрын

    • Por eso le falta un dedo.

      @bernardmedina8446@bernardmedina84462 ай бұрын

    • Ya tuvo su primer llamado de A T E N C I Ó N 😝

      @fenixalorca3143@fenixalorca31432 ай бұрын

    • Qualquer ferramenta, principalmente giratória, à bateria ou elétrica, oferece riscos para quem a opera. Um cinzel, uma serra manual, até um inocente martelo, pode ocasionar acidentes. Uma senhora aparando suas sobrancelhas com uma pinça, pode furar um olho, se for descuidada o suficiente para tal. Um bom profissional sabe como fazer seu trabalho.

      @paulomendoncasouza7981@paulomendoncasouza79812 ай бұрын

    • How about his left index finger.

      @vernscheck9089@vernscheck90892 ай бұрын

  • He lost me when I saw him using a felt marker. No selfrespecting woodworker would be caught doing that.

    @chrisallen2005@chrisallen20052 ай бұрын

  • So this jig he constructed was for rounding off a piece of wood. To make a bowl supposedly? It's also dangerous. And how would you use it to carve out the inside of the rounded piece? I think it would have been easier to just use the lumber and the drill to make a lathe. There are videos available that instruct you in how that's done. Then a person could carve the inside of the wood as well as the outside to make a bowl.

    @Temulon@Temulon25 күн бұрын

  • I have to be honest, a good idea maybe but absolutely far too dangerous to do this on a table saw. just watch table saw disaster videos, you will not sleep, i can assure you of that. when I use my table saw, that thing has my full respect, i would never attempt anything so dangerous, as if using a table in its approved standard function isnt dangerous enough. just don't do it guys. and to the author, hats off you come out of this alive and with a great result too but, man! that could have ended up badly for you. lets just hope that nobody copies you on this idea because you may be looking at a legal damages if they get hurt or worse. you may want to append the start of this video with a disclaimer just to inform what your doing is highly dangerous and should not be attempted at home. dont get me wrong, the lesson was great but the method was not worth the risk in my opinion, but of course, each to their own. All the best

    @projectsforcreativeminds1797@projectsforcreativeminds17972 ай бұрын

  • It’s all fun and games until someone gets hurt

    @manuelbettencourt4213@manuelbettencourt421318 күн бұрын

  • Nice job surviving through the video. I wouldn't attempt this wearing body armor.

    @dalehelmstead2306@dalehelmstead230621 күн бұрын

  • Gee, I wonder how he lost that finger...

    @alden1132@alden1132Ай бұрын

    • А так , шел по дороге пальчик и отвалился.... Что совсем тупой ? или кто доплачивает за тупость?

      @anutarigaya486@anutarigaya486Ай бұрын

    • Or only "one" finger!

      @alanevery215@alanevery2155 күн бұрын

  • Então eu assisti o vídeo mas não entendi para que serve essa peça

    @luziaparlato3128@luziaparlato31287 күн бұрын

  • Oh ya, that doesn’t seem dodgy at all.

    @gregurie2381@gregurie2381Ай бұрын

  • and why did youtube think i wanted to see this , i'll never know.

    @ewarda100@ewarda10025 күн бұрын

  • This is amazing!!! It's both brilliant and dangerous!!!

    @agarza6475@agarza64752 ай бұрын

  • Does no one use glue anymore?

    @timbarnett3898@timbarnett389824 күн бұрын

  • No entiendo por qué debe "hamacar" el trápano cuando hace alguna perforación.

    @raullascano1087@raullascano10872 ай бұрын

    • Для того ,что бы получился овал...

      @anutarigaya486@anutarigaya486Ай бұрын

  • Cool but very limited usage.

    @bobvargas1115@bobvargas111526 күн бұрын

  • I thought he was making a bowl at first. What did it end up being?

    @mryoureauser6723@mryoureauser6723Ай бұрын

    • A waste of time. That's what it ended up being.

      @1acroyear1@1acroyear1Ай бұрын

    • @@1acroyear1 You know what? I can think of a use for it. Unfortunately, it's an elusive project concept for me at this time. There are too many other things getting in the way of that specific project.

      @mryoureauser6723@mryoureauser6723Ай бұрын

  • OK, so what is it and what is it good for?

    @johnbgood52@johnbgood52Ай бұрын

    • Nothing and nothing.

      @1acroyear1@1acroyear1Ай бұрын

  • I've been in the woodworking industry for 36 years and I thought that this was very interesting and Ingenius. I've done similar things on the table saw, band saw and with routers. But! I've always used safety measures and I've never drawn blood with a power cutting saw (and I still have all of my fingers intact). This video is absolutely NOT for beginning woodworkers. A good idea, if done properly. This wasn't.

    @clydebutler6487@clydebutler64872 күн бұрын

  • I am glad that index finger was not there, otherwise it would have been in the way when you were making that center hole.

    @wizardmaster6639@wizardmaster66392 ай бұрын

  • Come si riconosce un falegname ? È facile . Basta guardare le mani. 👍😎🇮🇹🤣

    @emiliopucci9208@emiliopucci9208Ай бұрын

  • Hola puede hacer la guia para aguecarlo por dentro

    @sebastianoscarochstadt9245@sebastianoscarochstadt92452 ай бұрын

  • Person missing digits makes dubious devises. 🤔

    @Left-handed-liberal@Left-handed-liberal22 күн бұрын

  • Did he really just reinvent the laith? not good enough.

    @stevemack7110@stevemack71102 ай бұрын

  • It's a drill that identifies as a lathe.

    @geraldtraywick681@geraldtraywick68126 күн бұрын

  • Kreatif dan menginspirasi.

    @Cahsolotree@Cahsolotree2 ай бұрын

  • Trust no woodworker who is missing parts of a finger!

    @user-xm1cq6es9b@user-xm1cq6es9b2 ай бұрын

  • Better to use a lath.

    @davidlang4442@davidlang4442Ай бұрын

  • No entendí, que pieza o trabajo en madera hizo?

    @marcoperez4287@marcoperez42872 ай бұрын

  • Con razon le Falta un dedo !

    @JoseGutierrez-xm1vr@JoseGutierrez-xm1vr2 ай бұрын

    • Jajajajajaja😂

      @hectortoleadorico4843@hectortoleadorico48432 ай бұрын

  • Непонятно для чего кернить, если сверло по дереву???

    @vladimir51ful@vladimir51ful2 ай бұрын

  • Bel idea,ma è molto pericolosa...

    @gaetanotebaldi1246@gaetanotebaldi12462 ай бұрын

  • Nice video. Except what is this for? Maybe we might have been less critical of it if we had seen the finished product. What is it? A shallow bowl? A wobbling coaster? A waste of his time and the time of anyone watching. And dangerous too.

    @frankcuoco4273@frankcuoco4273Ай бұрын

  • Да долго нудно опасно сотни вариантов проще и надежней

    @user-gh8sm7pz4i@user-gh8sm7pz4i2 ай бұрын

  • Okay, so you "DOMED" a round piece of wood...what the hell for?...i don't get it. Did i miss something?

    @davidshiveley4508@davidshiveley4508Ай бұрын

    • The part where he loses a finger fucking around in the wood shop for nothing.

      @1acroyear1@1acroyear1Ай бұрын

  • 5:37

    @su-mu@su-mu2 ай бұрын

    • Holy crap! No joke. This raises credibility issues, like who will watch a cooking show where the chef is skinny?

      @clarencegreen3071@clarencegreen3071Ай бұрын

  • Buena

    @fernandosoto7136@fernandosoto71362 ай бұрын

  • Or you could just buy/build a lathe.

    @georgequalls5043@georgequalls5043Ай бұрын

  • Make sure your insurance is paid

    @squarelevelplumb@squarelevelplumbАй бұрын

  • 11:17 minutes of Tripe !!..................................

    @unky-duky7033@unky-duky70332 ай бұрын

  • POR HACER ESO Y SIN NINGUNA PROTECCION PERDIO UN DEDO

    @user-rw2sn7rs1k@user-rw2sn7rs1kАй бұрын

  • estar lijando con la cierra abajo y el sentido común donde quedó

    @yoestoy2882@yoestoy288224 күн бұрын

  • if your going to spend all the time to make a VID LIKE THIS, PLEASE LEAVE ACTUAL DIRECTIONS LIKE MEASUREMENTS, HOLE SAW SIZE ETC.

    @djmikesea@djmikesea17 күн бұрын

  • Did KZhead demonitize your video of you sawing off your finger?

    @thedevilinthecircuit1414@thedevilinthecircuit14142 ай бұрын

  • Waste of time trying to guess what this contraptions does, so turned it off at the first advertisement!!

    @lesblack413@lesblack4132 ай бұрын

  • Not a good or safe project to try

    @MD-gc4xq@MD-gc4xq2 ай бұрын

  • Dude your missing a finger slow TF down😅

    @johnwoodhouse3210@johnwoodhouse32109 күн бұрын

  • say something

    @nukebert1@nukebert1Ай бұрын

  • I’m sorry, but what the hell is this thing supposed to accomplish?

    @sfeddie1@sfeddie1Ай бұрын

  • Real Men of Genius....

    @flexjoe@flexjoeАй бұрын

  • LE PAGAN PPR HACER ESO Y NO MAS

    @user-rw2sn7rs1k@user-rw2sn7rs1kАй бұрын

  • It's jiust a jig. Not "Brilliant".

    @joshaughnessy6119@joshaughnessy611927 күн бұрын

  • how long did he stay in hospital ?

    @petermacleod5710@petermacleod57102 ай бұрын

  • Just a novice so

    @leahjane8849@leahjane88492 ай бұрын

  • Sale más caro el caldo que los huevo

    @JulioRodriguez-mj1zy@JulioRodriguez-mj1zy2 ай бұрын

  • Brilliant? Nope.

    @markgigiel2722@markgigiel272216 күн бұрын

  • Agradecido por mostrar lo que sabe, pero con respeto digo, que quienes vemos su programa , queremos aprender , pero este Sr no da enseñanza, no imparte , no comparte al no darnos las medidas que lo hace muy rápido, aparte que no habla, ni dice nada , salvo que tenga Alalia…….. Gracias.

    @victorincio6442@victorincio64422 ай бұрын

    • Las medidas en todo proyecto son obsionales...usen sentido comun , saquen su iniciativa

      @hectorgomez5850@hectorgomez58502 ай бұрын

  • buy a lathe for christ sake!!

    @paulgargulak8275@paulgargulak8275Ай бұрын

  • What a glorious waste of time!

    @graemefrost5861@graemefrost58612 ай бұрын

  • No. Just, no. Wait! I'll revise that! FCK NO! Buy a cheap lathe, or make one out of that drill your already using! 🤔 How did you lose half finger 🤔

    @AenesidemusOZ@AenesidemusOZ2 ай бұрын

  • Una brillante idea que Izzy Swan público tiene más de siete años y tiene como hacer el cuenco

    @rolandoalarcon642@rolandoalarcon6422 ай бұрын

  • what a waste of time, you could get much better results using a lathe

    @williamnicholson3391@williamnicholson3391Ай бұрын

  • No entiendo,si este hombre fabrica estas cosas no es capás de fabricar un tornillo de madera para sujetar las piezas que va a cortar o perforar todo lo hace de una manera tan peligrosa en ese bloquesito de madera,despues lijar esa piesa con esas revoluciones sin retirarla de la sierra,deveras hay quien cree que esta persona es un genio?

    @BobHaggins-xe7yc@BobHaggins-xe7yc2 ай бұрын

    • No es qué..?

      @raullascano1087@raullascano10872 ай бұрын

    • Es hábil e ingenioso Pero es probable que tú puedas diseñar y construir dicho tornillo para después compartirlo con nosotros

      @sergionc@sergionc2 ай бұрын

    • A inveja é um sentimento triste e doentio

      @ofi2701@ofi27012 ай бұрын

    • @@sergionc no tengo q demostrar nada a nadie es por eso q no me interesa hacer este tipo de videos pues hay q ser muy responsable al tratar d enseñar el uso correcto de estas herramientas y maquinaria tan peligrosas,me imagino q siendo carpintero deve tener su tornillo de banco o una base de apollo q usamos en carpinteria y aca en mi pueblo se le llama perro

      @BobHaggins-xe7yc@BobHaggins-xe7yc2 ай бұрын

    • ​​@@BobHaggins-xe7yc I hope you have translater on your device. You are totally correct. To prove his dangerous way of working, look at his left hand - one finger missing.

      @reteipegal7690@reteipegal7690Ай бұрын
KZhead