KZhead
Автокөліктер мен көлік құралдары

Leather Seat Repair with using Vinyl and leather repair kit | RESTORE | ALIMECH

AliMECH
2024 ж. 18 Сәу.
457 555 Рет қаралды
Жүктеу

In this video i will use Vinyl and leather repair kit, ((( video is not sponsored )))
Restoring leather sit with Vinyl and leather repair kit
kit i used: amzn.to/2tzUxcb
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/3beZ4BN
Dji Ronin sc Staiblizer: amzn.to/39bvyed
gopro hero 5: amzn.to/2H2ZbSQ
samsong gear 360: amzn.to/37YDj7b
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : facebook.com/ali.hoshyar....
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

Пікірлер

  • Followed your tutorial and now my seat looks perfect. Thank you!

    @abdullahKSA799@abdullahKSA7994 жыл бұрын

    • Thanks for watching, glad my video helped you 🙏

      @AliMECH@AliMECH4 жыл бұрын

    • How do they look a year later?

      @richeyrich2203@richeyrich22033 жыл бұрын

    • There was a big cut on my seat, and restoration fixed it. So far, I don’t have any issues and my seat still looks perfect except some small stretches.

      @abdullahKSA799@abdullahKSA7993 жыл бұрын

    • Richey, the repair area still same but I have some more damaged on other sits,

      @AliMECH@AliMECH3 жыл бұрын

  • Well planned and produced video on a topic of interest to anyone who drives the same car for more than 4 or 5 years, or who buys used, older vehicles, many of which have rips and tears in the driver's seat. Thanks for making this. The detailed instructions are great!. P.S. I'd recommend cleaning the entire seat bottom with the detailing brush & cleaning solution, so that the repaired area would not stand out because it was cleaner than the surrounding area. Takes only minutes more, and you have to wait 4 hours for the seat to dry anyway. Particularly liked your technique for putting the ventilation holes in the patch to match the surrounding area.

    @Anonymous-it5jw@Anonymous-it5jw2 жыл бұрын

  • It would have came out a lot better if you would not have cut the material but just loose strings, put that backing under trim and super glued the tear back together, put the resin over the cut with would be very small if done this way. Painted over the damaged area and then used some very fine sand paper to smooth it out. That is the way repairs are done by the manufacture.

    @petergriffin3549@petergriffin35492 жыл бұрын

  • “Only when you get close you can see the repair” Me from 10 feet away: Boi how much Taco Bell did you eat to tear through the seat like that?

    @destruxandexploze2552@destruxandexploze25523 жыл бұрын

    • Lol, it happens everywhere on that seat, even on the back

      @AliMECH@AliMECH3 жыл бұрын

    • 😂😂😂

      @markwillis5472@markwillis54722 жыл бұрын

  • Dude just in the last few days alone I've watched like 5 of your videos. I had to replace a fuel filter and clean my fuel injectors and you had awesome straight to the point without leaving anything out on those. I can see you stick to the same formula for other videos including this one. Much appreciated. Where you from brotha? Eastern Europe, Middle East?

    @tonyg-2jz82@tonyg-2jz822 жыл бұрын

  • Thank you for posting this video. Your seat leather looks exactly like mine. It gives me hope!

    @novabluerocks@novabluerocks4 жыл бұрын

    • You welcome, thanks for watching

      @AliMECH@AliMECH4 жыл бұрын

  • Thank you!

    @LifeAmongTheWildflowers@LifeAmongTheWildflowers7 ай бұрын

    • You're welcome!

      @AliMECH@AliMECH7 ай бұрын

  • Not bad, a lot better than I thought it would be. Kudos.

    @ThomasLeonard454@ThomasLeonard4543 жыл бұрын

    • Thanks

      @AliMECH@AliMECH3 жыл бұрын

  • Cool. I have a hole the size of a small felt pen and it's a leather seat cushion it's not that big though. but wondering when you put the resin on top of it will it reinforce the hole from tearing overtime?

    @calmstormambience1875@calmstormambience1875 Жыл бұрын

  • This is the most helpful tutorial for this kit, thank you.

    @zzzzoot@zzzzoot Жыл бұрын

    • Glad it was helpful!

      @AliMECH@AliMECH Жыл бұрын

  • Very well explained exelente

    @chatlelolcosanbonbazo559@chatlelolcosanbonbazo5596 ай бұрын

    • Glad it was helpful!

      @AliMECH@AliMECH6 ай бұрын

  • Wooooow!!!! That is really cool Man! I didn't know that was possible! Thank you for sharing!

    @JuanKis@JuanKis3 жыл бұрын

    • Thanks, if you take ur time with mixing colors, u will get better results than mine

      @AliMECH@AliMECH3 жыл бұрын

  • You make me laugh cos you speak like you dont give a fuck but you do great work . LOL Thanks for the video

    @etilhcir4645@etilhcir46453 жыл бұрын

    • lol thanks

      @AliMECH@AliMECH3 жыл бұрын

  • Cleanest part of the seat

    @mkfourgli1@mkfourgli12 жыл бұрын

  • This is a great video bro. I have a question. Can you put a link to the cleaning kit you used? It looked like it worked very well.

    @docmiaz@docmiaz2 жыл бұрын

    • I would've cleaned the whole seat! That stuff works ... whatever it is!

      @israelsantos7896@israelsantos7896 Жыл бұрын

  • What did you use for the holes?

    @captainnutty4168@captainnutty4168 Жыл бұрын

  • That's awesome thank you

    @neilsmith4836@neilsmith48363 жыл бұрын

  • Clean the rest so it matchs. What did u make the pattern with? The plug in wand?

    @stormyweather8798@stormyweather87983 жыл бұрын

    • It comes with the repair kit

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH what iron tool did you use? I think that is wat they are asking.

      @hmdixon91@hmdixon913 жыл бұрын

  • 5:56 I would have used a Dremel tool with a very small drill bit

    @Phantoma3@Phantoma3 Жыл бұрын

  • Would it reopen after a while from sitting on it it seems to be labor intensive and in the end if it opens again its a loss with the kit as well

    @faris9327@faris9327 Жыл бұрын

  • I farted while driving and blew a hole right under my brown eye. I will use this video to fix my shart damage. Great video! Thank you!😘

    @BPoweredLove@BPoweredLove3 жыл бұрын

    • Even this expert level tutorial cannot conceal shart rips on a leather interior. Please consult the owners manual.

      @nodnarB14@nodnarB143 жыл бұрын

    • Can confirm.

      @zixoon@zixoon3 жыл бұрын

    • What am I a 12yr old boy? This thread is too funny😂😂😂

      @strawbricketteshortcake5460@strawbricketteshortcake54603 жыл бұрын

  • Know this is an older vid but, great job! Thanks.

    @ElkhornRich@ElkhornRich3 жыл бұрын

    • Thanks 🙏🏻🙏🏻

      @AliMECH@AliMECH3 жыл бұрын

  • Very well done!

    @jayyin88@jayyin882 жыл бұрын

  • Nice job! Looks like I can do it Thanks

    @seashorelineone@seashorelineone3 жыл бұрын

    • Yes, its easy,

      @AliMECH@AliMECH3 жыл бұрын

  • It’s def way better than before!!

    @brandonbattle9359@brandonbattle9359 Жыл бұрын

  • This was the best instructional for this application that I have seen! Thanks!

    @tomvosejpka7854@tomvosejpka78542 жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH2 жыл бұрын

  • Looks great thank u for sharing

    @melissacarr3257@melissacarr3257 Жыл бұрын

    • Thanks for watching

      @AliMECH@AliMECH Жыл бұрын

  • You’re a Genious!!!!

    @6hundred6ixty6ix@6hundred6ixty6ix2 жыл бұрын

  • I have the same tear on my 04 Highlander, see if I can make it look better before I sell it

    @matthewvasquez9278@matthewvasquez92782 жыл бұрын

  • What tool did you use to make the holes?

    @debbiejohnson1325@debbiejohnson13252 ай бұрын

  • prefect job!

    @saradiaz6179@saradiaz61793 жыл бұрын

    • Really not perfect, but better than before, I will do another video soon

      @AliMECH@AliMECH3 жыл бұрын

  • Superb!!!!!

    @lethecm8385@lethecm83853 жыл бұрын

  • Came out great

    @carlosoliva7350@carlosoliva73503 жыл бұрын

    • Thanks Carlos

      @AliMECH@AliMECH3 жыл бұрын

  • Great job

    @TK-lc7be@TK-lc7be3 жыл бұрын

    • Thanks,

      @AliMECH@AliMECH3 жыл бұрын

  • Looks good, well done!

    @MrLospect@MrLospect4 жыл бұрын

  • Keep it up bro I'm from karnataka

    @syedyounus5464@syedyounus54642 жыл бұрын

    • Thanks bro

      @AliMECH@AliMECH2 жыл бұрын

  • Excellent sir

    @naveencarworld.2782@naveencarworld.27823 жыл бұрын

    • Thanks 🙏🏻

      @AliMECH@AliMECH3 жыл бұрын

  • I like your editing style 👍 great video

    @GraceGuitar@GraceGuitar4 жыл бұрын

    • Thanks Grace for turning in

      @AliMECH@AliMECH4 жыл бұрын

  • Good work man

    @jubaxhunter6580@jubaxhunter65802 жыл бұрын

    • Appreciate it

      @AliMECH@AliMECH2 жыл бұрын

  • Dang this is a really good tutorial

    @javiergomez9099@javiergomez90992 жыл бұрын

    • Thanks

      @AliMECH@AliMECH2 жыл бұрын

  • Nice job!

    @jamesberonja1539@jamesberonja15395 ай бұрын

    • Thanks!

      @AliMECH@AliMECH5 ай бұрын

  • appreciate you Video, much needed

    @Shpordeez@Shpordeez Жыл бұрын

  • So now i have to go buy that tiny iron. Great. Anyway thanks for the video, appreciate!

    @jedibreezy7212@jedibreezy72122 жыл бұрын

  • Good Video Tutorial

    @I41535D@I41535D3 жыл бұрын

    • Thanks

      @AliMECH@AliMECH3 жыл бұрын

  • The spatula they sent was insufficient for a truly smooth application.. IMO, a small offset spatula (typically used for frosting cakes) would have given MUCH better results..

    @annabarth7264@annabarth7264 Жыл бұрын

  • Nice video.. thanks

    @CARNIVOREat60@CARNIVOREat60 Жыл бұрын

    • Thansk for watching

      @AliMECH@AliMECH Жыл бұрын

  • What is the name of the song that you used throughout the video ?

    @ianblanchet5500@ianblanchet55003 жыл бұрын

  • Cut duck tape, apply, done lol

    @Ghoppa32@Ghoppa3210 ай бұрын

  • Great job brother!

    @BuddysDIY@BuddysDIY3 жыл бұрын

    • Thanks 🙏🏻

      @AliMECH@AliMECH3 жыл бұрын

  • color can be selected using ncs.?))

    @newvendetta9638@newvendetta96384 ай бұрын

  • What tool did you use to poke holes back in the seat?Does it come with the kit?

    @rodbratcher8254@rodbratcher8254 Жыл бұрын

    • I used a craft bead reamer. Time consuming. But very relaxing! 😂

      @lindamcd1217@lindamcd1217 Жыл бұрын

  • Nice bro 👍

    @yogensharma5721@yogensharma57212 жыл бұрын

    • Thanks ✌

      @AliMECH@AliMECH2 жыл бұрын

    • @@AliMECH do upload more ✌

      @yogensharma5721@yogensharma57212 жыл бұрын

  • Azam Ali says >>>>so brilliance

    @azamauto2936@azamauto29364 жыл бұрын

    • thanks for watching

      @AliMECH@AliMECH4 жыл бұрын

  • For india you need HBC kit tell me

    @sahanaash4653@sahanaash4653 Жыл бұрын

  • We just gonna pretend it looks good?? 🤦🏻‍♂️

    @ONC_Diggin@ONC_Diggin3 жыл бұрын

    • lol......it looks better than a hole for sure....but saying you can't even notice is a stretch.

      @tbev3363@tbev33633 жыл бұрын

    • Lol, yes, I even said that it's not good, but it will hold it from getting bigger

      @AliMECH@AliMECH3 жыл бұрын

    • @@AliMECH this guys trippin man for a repair it looks great 👍🏻

      @hansomesolo1136@hansomesolo11362 жыл бұрын

    • If you want it to look good, spend that dough. If you're looking for a repair, this is great.

      @jamesb9303@jamesb9303 Жыл бұрын

    • Well it looks better than it did Mr. Perfect

      @georgesmith113@georgesmith113 Жыл бұрын

  • Since the holes do have a pattern. What could be done is to make it unnoticeable would be to make lines wit thin tape peices like a grid of a sort to match the pattern then start making it holey lol very good still THANK YOU!

    @mannyuribe8780@mannyuribe8780 Жыл бұрын

    • yeah he slacked on that part. half the holes look like pen marks

      @bamwa@bamwa Жыл бұрын

  • That’s not bad man

    @nikolaikornienko8862@nikolaikornienko8862 Жыл бұрын

    • Thanks

      @AliMECH@AliMECH Жыл бұрын

  • I am purchasing a used car where someone tried to patch the leather and did a poor job so that it's basically just a blob of filler with no perforations. Is it possible to remove the filler they used and then re-patch it by myself?

    @peachykeen96@peachykeen964 жыл бұрын

    • Yes, it would be much better, and take your time to match the color and it will be much better than before

      @AliMECH@AliMECH4 жыл бұрын

    • AliMECH how do you recommend getting the old filler off?

      @peachykeen96@peachykeen964 жыл бұрын

    • @@peachykeen96 Cutting it out makes the most sense, no?

      @wellnesspathforme6236@wellnesspathforme62363 жыл бұрын

  • I have a huge tear on the corner of my seat, how am I supposed to fix that? it goes halfway down the height of it...

    @spaghetti_man3807@spaghetti_man3807 Жыл бұрын

  • Looked great till you butchered those holes😂😂😂😂

    @mercury0214@mercury02143 жыл бұрын

    • Oh yeah! lol

      @AliMECH@AliMECH3 жыл бұрын

  • Should I try mine or get a seat from junk yard ??🤔🤔🤷🏾‍♂️ the tutorial was great.✔

    @misgual@misgual2 жыл бұрын

  • How much the price

    @zerozero8643@zerozero86434 ай бұрын

  • Where you get the iron from?

    @timothystallworth4295@timothystallworth4295 Жыл бұрын

    • It came with the kit

      @AliMECH@AliMECH Жыл бұрын

  • Sick music

    @shalps9681@shalps9681 Жыл бұрын

  • Permatex kits is great FOR NON perforated leather seats. Feel this guy rushed the color matching. Also the backing patch he inserted was WAY TOO big for the tear and was visible from the perforations. A pro would’ve colored that backing cloth he inserted

    @XroorX@XroorX8 ай бұрын

  • I would have took a sewing needle and poke little holes to match the pattern of the seat.

    @itsintheword230@itsintheword2309 ай бұрын

  • Does it matter which leather cleaner you use?

    @Luna-sp7be@Luna-sp7be4 жыл бұрын

    • No, just to clean the repairing area for better bonding

      @AliMECH@AliMECH4 жыл бұрын

    • Thanks! I finally got around to purchasing my repair kit, but reading the instructions I already appear to have a problem. There's only one backing cloth provided, and it's much smaller than my tear. What should I do?

      @Luna-sp7be@Luna-sp7be3 жыл бұрын

    • You can put few layers of fabric too, it doesn't have to be that exact backing cloth

      @AliMECH@AliMECH3 жыл бұрын

    • Triclean

      @lindamcd1217@lindamcd1217 Жыл бұрын

  • Nice

    @bosslifethebusiness@bosslifethebusiness3 жыл бұрын

    • Thanks

      @AliMECH@AliMECH3 жыл бұрын

  • At first I thought what a sh!t repair..then I realised this is just a repair tutorial not a restoration to full glory...👏👍 Well done from New Zealand.

    @KRYSISJAG@KRYSISJAG Жыл бұрын

    • Thanks, appreciate that

      @AliMECH@AliMECH Жыл бұрын

  • Howblong can last

    @houseofblouseampang2936@houseofblouseampang29362 жыл бұрын

  • That's really going to last?)

    @marshallsilva9389@marshallsilva93892 жыл бұрын

  • Not bad

    @temirtaragay8932@temirtaragay8932 Жыл бұрын

  • Good video, but the instructions clearly say: "do not use the included hardener" on a "soft area such as a seat"

    @mjk9674@mjk96744 жыл бұрын

    • That's what they use in there official video, I tried it, it wont cure, it will stay sticky, and dont worry it will not be hard as u expect, even with the hardener, still like a rubber

      @AliMECH@AliMECH4 жыл бұрын

  • great idea

    @noname9585@noname95854 жыл бұрын

    • Thanks

      @AliMECH@AliMECH4 жыл бұрын

  • it's not the best but if you think about it it's cheaper than replacing the whole seat !

    @bunster4322@bunster43222 жыл бұрын

    • Thanks, yes exactly

      @AliMECH@AliMECH2 жыл бұрын

  • That seams like a lot of work

    @devingorge1022@devingorge10223 жыл бұрын

    • The color mixing process is the hard one to me, but other steps are easy

      @AliMECH@AliMECH3 жыл бұрын

    • Thanks for getting back to me, I'm going to try it in two weeks. Wish I could show you a picture of it, they way it is now

      @devingorge1022@devingorge10223 жыл бұрын

    • No problem, my personal Facebook in the up right side of my KZhead channel

      @AliMECH@AliMECH3 жыл бұрын

  • ALLAH IS good!!!

    @gusto8585@gusto8585 Жыл бұрын

  • Horrible

    @alpo44@alpo443 жыл бұрын

  • Honestly it's very obvious the inperfection even from far distance but thanks for the video

    @sandakramo3ash@sandakramo3ash3 жыл бұрын

    • Yes, agree with you, but much better than before

      @AliMECH@AliMECH3 жыл бұрын

    • It will stop from the hole getting bigger at least. or you could go on Ebay and spend 500$ on a seat.

      @mikebarker5783@mikebarker57833 жыл бұрын

  • Yeah I have a tear just like that one and a repair place wants to charge like 900 for it so no thanks this’ll be just fine

    @natrix888@natrix888 Жыл бұрын

  • Alright if it's Stevie Wounder's car..

    @MrGeeza@MrGeeza Жыл бұрын

  • Well you no longer had a rip but it looked like???? when you finished. I wouldn’t want my nice sports car having a nasty repair such as that on my seat!

    @shereeward6905@shereeward69058 ай бұрын

  • If those seats were just maintained and cleaned and polished on a regular basis they wouldn’t tear like that. I’m sure those surfaces fissures are just due to drying of the leather, making it weak. A leather conditioner would do wonders on those seats. Sources: Owned two cars with leather seats, both in immaculate condition

    @jaywheaton6755@jaywheaton67554 жыл бұрын

    • It's been maintained good but keys and jeans which has smale metal ripped it like this

      @AliMECH@AliMECH4 жыл бұрын

    • People also may do this on purpose, ask me how i know.....

      @yamahayz9227@yamahayz92274 жыл бұрын

    • @@yamahayz9227 How do you know?!...

      @makeamoment2428@makeamoment24284 жыл бұрын

    • Well, actual leather makes it last longer. This one is not leather...so it tears easier with age, regardless of condition.

      @katiehunt3083@katiehunt30833 жыл бұрын

    • Thank you so much for this information! My mom has a Benz and the seats are like this. My brother was driving it for a while and the driver seat and arm rests are ruined! We had been thinking that it was because of how he always leaned back in the seat, but it could very well be that he didn't get the car detailed and the seats conditioned. I took it for an estimate and was quoted over 1k to have it fixed. Maybe I can find someone to do this instead.... just hope the outcome is as good.

      @cedricadaniels7983@cedricadaniels79833 жыл бұрын

  • Hasta la weba

    @diegogxn10@diegogxn1011 ай бұрын

  • My dog made a hole with his nails on my camaro leather seats 😢

    @michaelpast19@michaelpast194 жыл бұрын

    • Oh that's not good lol, fix it like this 🙏

      @AliMECH@AliMECH4 жыл бұрын

    • Same thing happened to my Escalade

      @johnyramos1954@johnyramos19543 жыл бұрын

    • johny ramos why do people put their dogs in their cars with leather interior 🤦🏻‍♂️

      @hexZ06@hexZ063 жыл бұрын

    • @@hexZ06 Exactly!

      @DallasStorm43@DallasStorm433 жыл бұрын

  • I think you need to find a better kit but not super bad. If it weren't for the holes it would have turned out ok.

    @ApexRoyals@ApexRoyals3 жыл бұрын

    • Totally agree man, the holes and mixing colors need experiance, I did that on camera without practicing, so ppl know what the result will be

      @AliMECH@AliMECH3 жыл бұрын

  • Instructions unclear; hardener stuck in my urethra!

    @hellsgunz1006@hellsgunz10062 жыл бұрын

  • Horrible how this repair is done! So obvious! Can't anyone do a good job so its NOT visible so badly?

    @Golyamkur@Golyamkur3 жыл бұрын

  • And that makina that you use to make the holes, what's its name?

    @nelsonrivas7573@nelsonrivas75733 жыл бұрын

    • Looks like it’s just a soldering iron with a fine tip

      @rlg42@rlg422 жыл бұрын

  • I mean it looks better I guess lol

    @goodnightvids@goodnightvids Жыл бұрын

  • Mate, seriously, you didn't even take the time to draw some lines so that you know where to put the holes, you just went to town with it..

    @mircea5013@mircea50132 жыл бұрын

    • Yes, you are right

      @AliMECH@AliMECH2 жыл бұрын

  • See A.R.T.s Real Repairs if you want to see how to repair perforated leather seat where it looks like new. This repair what we use to call "butcher job" Sorry, I know you did your best but A.R.T.s will show you a professional repair. (PS...I'm not associated in any way with A.R.T.s, just try to help with another option). Oh, and 'seat' is not spelled 'sit' : )

    @andrewdytyniak1529@andrewdytyniak15292 жыл бұрын

  • wasting my time of doing this.............why not buy new chair...........and I have to cost money to buy all the tools, gel, and instrument for it in order to fix it.....lot of works

    @alexthai2456@alexthai2456 Жыл бұрын

  • How bout no

    @eg9939@eg9939 Жыл бұрын

  • This is not professional repair It's ugly

    @ahadnawaby8384@ahadnawaby83843 жыл бұрын

    • Agreed

      @AliMECH@AliMECH3 жыл бұрын

  • WTF do u mean only if u get close... A blind man can spot that from a mile away. What a joke 🤣🤣🤣

    @lazymaniac5511@lazymaniac55112 жыл бұрын

  • Not a option.

    @biggiesmalls3083@biggiesmalls3083 Жыл бұрын

  • Wow that leather is filthy

    @GrabinGears@GrabinGears2 жыл бұрын

  • Duct tape

    @RafaelPerez-vz3nz@RafaelPerez-vz3nz11 ай бұрын

  • Nice job fixing the hole, but it still looks like crap. Better than nothing, but not even close to a professional job.

    @onlyonecannoli3952@onlyonecannoli39523 жыл бұрын
KZhead