Hello everybody!🖐 The Restorer is with you again.🔥😎
Restoration of an ancient WW1 trench kerosene lamp. This antique and rare find came to me in very poor condition. The surface of this lamp is all covered with rust and corrosion. It was found during excavations at the sites of military battles. This antique kerosene lamp is made of brass. The lamp can be filled with kerosene, oil, butter, etc. The soldiers used it to light their trenches and keep warm. This thing absorbed all the historical memory of the people who used it and the wartime of World War 1. I have tried to restore this kerosene lamp to perfect condition. I hope I did well. Did you like the result of the restoration? Write how you would restore this antique lamp? Maybe you have some good tips and ideas? At the end of the restoration, we will check how it actually burns and illuminates the room. I don't know for sure who made such kerosene lamps and what year they were. If you have more information, write in the comments. I will be interested to know more.
Also, do not forget to rate my work in the comments from 1 to 10.😉
I am very interested and important to know your opinion.🙂
Thanks everyone for watching! See you!)
It will be even more interesting later...
✅Become a sponsor💎 of this channel and support our work👇
/ @therestorer
✅Support my Patreon 👉 / the_restorer
If you have any questions, ask them in the comments.
I will try to answer everything!)
#restoration #WW1 #TheRestorer #asmr
Rate my work in the comments from 1 to 10.😉 I am very interested and important to know your opinion.🙂 ✅Become a sponsor💎 of this channel and support our work👇 kzhead.info/tools/4fsm3kk1LBvVfyUY4aivcA.htmljoin Thanks everyone for watching! See you!)
A A A
Q
A
Qaqqa
QqaAPa Q&A qqA
Its truly amazing how you start with an item covered in 50/50 iron oxide(rust) an copper sulfate (verdigris) and end up with a shiny brass lamp
Thank you!)
@@TheRestorer Imagine being so dim-witted that you don't understand that someone just roasted you to a nice 415 degrees
@@TheRestorershould try white vinger next brass project works really well, and I usually use polish with fine steel wool then microfibre for final finnish, personally find takes abit longer with dremel and can leave marks although only tried it twice.👍
I'm not into too much theatrics in restoration videos. Thank goodness you don't have some annoying music in your videos.
Thank you! My videos without music
It seems more and more you tubers are putting music over what they are doing. Its so annoying
Either they have started making videos ~ most of these assume that we don’t want to hear their noise and put music over the original recording 😠, or they are committing fraud and don’t care about how the video is presented ~ that the hoodwinked watch it and see the cash-cows (advertising) and the money laundered from them 😡
❤👌
@TheRestorer thanks for the lesson and no annoying music!
10 because you kept the obviously uneven part near the fire outlet as well as the scratches in the lids. The battle scars of the lamp during that time are well presented and appreciated. Kudos!
Thank you!)😉💚👍
Desde Perú k lindo trabajo haces admirable
Another brilliant restoration just perfect 10/10 🥰
Thank you!😉💚
👌❤
Restoration, editing, filming is a 10!
I am very glad to hear that!) Thank you!)
❤👌
I am not a restorer but love watching these videos.
😉👍💚Thank you!)
Jók a videóid. Üdv Magyarországról 🇭🇺🇭🇺🇭🇺
👌😊
Nagyon szépen köszönjük! Magyarország csodálatos. Budapesten voltam!
KZhead is the only place I ever saw brass rust. The washers would be leather.
Fabulous! ❤❤❤. 10!
I give you a 10 as you and other great restorers do such great work, especially to very old and historical things. THANK YOU.
Thank you!😉💚👍✨
Godd job bosss👍👍👍👍👍👍👍🇲🇨😁
Thanks😉👍
Great work 👏! Keeping it as original and like new as possible while saving its "used" appearance. 10...
Thank you!)
Well done My Friend,from Bayamo, Cuba
Thank you!👍😉
Indudablemente la restauración es un arte que respeta y enaltece los artefactos que nuestros mayores usaron en sus épocas pasadas cada artículo restaurado es un recuerdo de cariño para ellos y agradezco de corazón a quien ejerce esta tarea desde argentina un abrazo a cada maestro en esta profesión
Belissimo trabalho 👏👏👏👏👏👏👏👏👏♥️
💚😉👍
👌❤
Perfeito! Ótimo…..Uma arte…
Simplemente lindo y hermoso trabajo, saludos desde México
Благодарю! Конечно, 10. Альбина из Уфы.
Came out amazingly, another 10
ΜΠΡΑΒΟ.ΕΞΑΙΡΕΤΙΚΗ ΔΟΥΛΕΙΑ.
👌😊
Ευχαριστώ!
My favorite old, very vintage item's, some ancient too is basically the best, I do enjoy watching such incredible restoration video's such as yours I give this video, other's a definite 10/10 for sure. It's asmr but in restoration gotta love it.❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Thank you😉👍💚
@@TheRestorer No problem 😊
👌👌
Amigo, está restaurando La historia antigua.🥳💫💯
Yes 🔥
Thank you!)💚👍😉
💚👍😉
Just one question. How do you get Rust or iron oxide on something made from brass, as one cannot transfer to the other
I do not know. brass oxidizes and changes color if it lies in the ground or among scrap metal for 100 years
I have a few reservations - it's a nice thing to chemically remove the oxide layer from the brass sheet and polish it to a high shine, but in the case of this lamp, I'd opt not only for surface cleaning, but also for opening it by unsoldering the bottom. This would allow me to unsolder the burner tube as well, clean the vessel and burner of unsightly solder deposits, smooth the warped top of the stock vessel, and re-solder the burner tube properly so that it is guaranteed to seal. Someone must have dropped the lamp in the past, or something heavy must have fallen on it - and it was corrected in a rather humbuggish way by simply bending the burner tube to an approximately vertical position and re-soldering it in an unsightly way. This is evidenced by the significant deformation of the top of the vessel just below the burner and the thick and irregularly applied layer of solder between the burner and the vessel. This may have occurred just after its manufacture in the aforementioned WW I, but it would be worthwhile to return it to its truly original form - if it is to be restored, it should be to the condition of a new piece, not with the preservation of significant appearance defects. And pouring lighter fluid into a lamp is a pretty dangerous thing to do if kerosene was originally intended as the fuel - it needs to be distinguished. The original rubber gasket around the pour hole might not survive the petrol mixture without damage, although it would withstand kerosene without significant change. But then again, it is true that lamps in the form of a similar torch made from a modified fired brass cartridge of around 50mm calibre fitted with a fabric wick and with petrol as fuel were used as a source of light and especially heat even in the trenches during WWII - they were perfectly common on both sides of the Eastern Front and with partisan units in Europe, as ordinary petrol was easier to obtain from vehicle supplies than finding kerosene usable only for lighting.
Thanks for the advice. I wanted to leave the lamp in this condition. I did not know that they could be made from a 50 mm cartridge case
@@TheRestorer You misunderstood me. Your lamp is made of brass sheet directly as a lamp by a craftsman - a plumber or a blacksmith. BUT - during the wars, in principe identical lamps were made "on the knee" = DIY by remaking suitably shaped objects with different purposes into just such a simple "torch". So one took "something" that was already shaped like a container and there was no need to press a flat flat sheet and roll it into a round, when such objects were easily obtainable in the form of empty fired cartridges for the then very widespread class of anti-tank and anti-aircraft guns, one just added a lid or some sort of holder with a wick and the lamp was ready. All you had to do was pour in freely available fuel - almost all military equipment ran on petrol at the time, diesel became more widely used during WWII in the form of Russian T-34 tanks - and you could light and heat ... cally
That’s a wicked cool lighter.
👌
Thank you. yes she is beautiful)
Rate you from one to a 10? how about 106. Love love love it. Absolutely amazing. To bring some thing back to its original beauty is wonderful.
😊👌
Thank you very much for the high rating 💚👍😉
I give you 8 because it's a nice restoration not too complicated.
Amazing.
Świetnie jest to odrestłrowane ta cała lampa naftowa pozdrawiam twórcę tego filmiku 👍👍👍👍
Thank you!)💚👍😉
Your attention to detail is amazing😮
Thank you!👍😉
Beautiful work a 10 for sure.
Very nice.
Amazing Restoration 👍🏻👍
Thank you!😉👍
This was a fabulous restoration. I'd rate it 10 ☺️ Just thought replacing those rubber rings could have been better. Subscribed & liked ❤️
😊👌
Thank you very much!💚👍😉
This restoration was magical. Fascinating watching a rusted lamp emerging into a beautiful polished piece. I would rate it a 10 And thank God there is no music.
Wow very good ✌️😃🔥🔥🔥
Thanks😉👍💚
10 I really love the history of these things 😀
Thank you!😉👍
👌❤
With all that polishing, I was expecting a genie to come out of it 😀
Wd40 kullanman çok iyi oldu. Güzel video. Tebrikler 👍🏻
😊😊
Teşekkürler!)
8/10. Nice job and I’m pleased that you kept the history - scratches and small dents. However I question the highly polished finish, I preferred the brushed brass finish just prior to polishing which felt more authentic.
Thank you!💚😉👍
З останнім я цілком згоден!
Lindo , Parabéns!
Obrigado!👍 De onde você está assistindo?🌍😉
Excellent 👍🏾
You must get all these items from the same place... all the rusting and oxidation looks the same.... 🤔
+- yes
Watching your videos is so satisfying and you do a fantastic job 😊
I am very glad to hear that!) Thank you!)
💚😉👍
❤👌
Wow, 10
Thank you!👍😉
Great work 👏! Keeping it as original and like new😄
Thanks!👍😉💚
A 10 out of 10 . Beautlfull
Thanks!😉👍
Lovely restotation!.
Thank you!😉👍
👌👌
It’s perfect
👌😊
Thank you!💚👍😉
Excellent work...10
👌😊
Thank you very much!💚👍😉
Great work here as always! I was thinking that this might have been a medic's lamp as gauze was being used as the wick. Regardless, super cool!
Thanks!😉👍
Maravilha👏❤
Excellent !!!
Thank you!
Nice 👍 work love the lighter
😊👌
Thank you!💚👍😉
10+!
Thanks
very good Congratulations ❤❤❤
I enjoyed watching this restoration video. I like the lamp, and is worth a solid 9.5. Question for you. Does this model of korosene lamp have any glass topper etc? I would definately like seeing this lamp with a top piece, but overall it came out fantastic.
Excellent filming and editing! Wow🎉
Thanks!😉👍
Great restoration bro ; Well done. I wish you more success 👌❤
Thanks!💚👍😉
Very cool.👍
Thanks😉👍
10 out of 10. Congrats!
Thanks!👍😉💚
Solid 8/10. And you earned yourself a new subscriber 🙂
Thanks!👍😉💚
😊👌
عمل ممتاز👍👍👍👍👍👍🌹
Thanks!👍😉💚
👌😊
I really like that 1942 lighter
Thank you!😉👍
lighter 1942?
👌👌
Very nice work I like it
😊❤
💚👍😉
Thank you!💚👍😉
the exact same lamp was found at a flea market in excellent condition. I thought it was from World War 1. So it was used in the trenches. At first I thought it was homemade. but when I saw your video, I realized that she was not the only one. an interesting thing, it runs on gasoline and kerosene, and on alcohol
Yes, an interesting antique lamp. Do you have an identical lamp?
Not bad ,I can't give you more than 9, you missed few details...anyway good job !!!👍👍👌👌
Thank you!
❤👌
I would rate your restoration as a 10 and, You Tube a ZERO for sticking 10 pop up ads in an 18 minute video!
Thank you very much👍😉
A good 10 for you!
Thanks!
😊👌
"It's a long way to Tipperary, It's a long way to go..." 🇬🇧
A long way to what?
@@TheRestorer "It's a long way to Tipperary", a WW1 song. The kind of song that the original owner sang or listen.
looks like more than a few hundred years old!
Why was there rust on a brass item? Seems a little fishy...
This is corrosion. And particles of rust spilled over from other metal things that were near the lamp
mission passed respect plus🎉😍
Thanks!💚👍😉
@@TheRestorer I guess you remember my request for that vintage bike's restoration😅😅
Bombastische Arbeit 10,10,10. Ich würde auch gerne wissen wer der Hersteller ist? Bernd Frankenland
Thank you!😉👍
Lars// !!!! 10/10
Thanks!👍😉💚
My God...that was a slow burner (pun intended)...i thought there was going to be a part 2 😂
Imagine how much time you'd save with a real buffer. Restore an older grinder and there you are.
defiantly a 10
Thank you!😉👍
❤👌
9,8 😊
👍😎✨
10/10
👍😉✨
😄👌
I am wondering why the bottom of the lantern wasn’t rusted at all ??? And the rubber washer was in perfect shape that is strange after 70 years doesn’t rubber break down? Just asking…
I was also surprised by this, but I read that rubber and plastic decompose in nature from 100 to 450 years. I read it on the Internet.
@@TheRestorer What about the bottom of the lantern ??? It was spotless hows that possible without reading it on the internet
@@johnrula it's fake,blueish rust doesn't exist anyway,look at a video about fake restorations, I'd say 40% of restorations are fake. Also rust happens everywhere, meaning if some where is spotless, it's also fake
@@yrbc I agree this has to be a FAKE. As the bottom was stopless and he wouldn’t say how that was possible…FAKE 0 out of 10 for nothing
👌😊
Al bronce despues de pulido se le da una mano de laca o barniz para que no se oxide
Yes I know. Thank you
👌😊
👍👍 10 👍👍
Thank you!😉👍
Why was a brass container rusty? Help me out here.
It was in aggressive natural conditions
Yah I was wondering that also! There are ALOT of FAKE restoration videos on youtube , I also asked why the rubber washer was perfect and the bottom SPOTLESS???
Brass doesn’t RUST it tarnishes, curious isn’t it?
😊👌
10!
Thank you very much!💚👍😉
Bom trabalho 👏👏🇧🇷🇧🇷
Thank you!😉👍
👌❤
That...was an excellent restoration of a pretty rusty WWII lamp. A lot of time spent to make it 'shine''...and work as it should. Very cool... Kudos to you...!!
👌😊
Thank you very match!😉💚👍
Omg i love that lighter. Where did you get it?
Thanks!👍😉
How come all of these videos start with something solid brass that looks "Rusty" when brass can not rust?
itt was dug up in an excavation. that 'rust' is hardened dirt. its not rocket surgery
@@brapamaldi7666 It is artificial patina from a spray can. Can be bought at any craft store genius
@@macgyver15147 herp derp lerp verp terp nerp
Yes, brass does not rust, but after many years it can become covered with corrosion, plaque, and oxidize
Was there any particular procedure for cleaning the inside of the fuel tank as part of the restoration?
I cleaned the middle with gasoline. This process was not shown in the video. You can't stuff the camera in the middle)
😊👌
a pasiencia e o segredo nta 10 ass brasil
Thank you very much!💚👍😉
10. I wondered about the rubber gaskets. One seemed in bad shape (top of lantern). Is it bad form to replace anything? Did every soldier get one or just upper ranks? Being lazy since I can google 😊 18:45 From SF
Hello! Thank you!👍😉 What restoration would you like to see in the future?🙂
You rubbed it so much, and still no Ginie. 😒 Beautiful Job! Thank you for restoring hystory.
10❤ 🎉
💚Thanks👍😉
Why don't you sandblast? Just after washing it with soapy water or rinse with oil?
Just two comments from me. First, and it is a small thing, why after all the work did you go back with that ratty looking washer on the top nozzle connection? And second, did you clean the inside if the reservoir? If you did, why not show that part also? You do get a a 9.5 out of 10 from me for resurrecting a still useful piece of history.
Ciekawią mnie te stare uszczelki...?😀
Stare uszczelki...?🤔
@@TheRestorer To chyba są podkładki pod śruby? Przepraszam za brak kompetencji. Jestem zachwyconym laikiem. Dziękuję, pozdrawiam.😀
Made from Brass?
Yes, it is brass