Never seems to fail, cattle 💩 and chains. I always liked the look of the 966 with duals.
@pinesedgefarm115515 күн бұрын
Always 🤦♂️🤣🤣. I do wish it had 38's on the back, but I guess 34's are cheaper to replace 🤣🤣🍻🍻🍻
@hartungdairyfarm071315 күн бұрын
I don't know about you.....alls i seem to get done are chores....i need the younger version of me around here..😂
@MissouriRob16 күн бұрын
It would be nice, but mamma would probably throw the younger me out of the house these days 🤣🤣🤣🍻🍻🍻🍻
@hartungdairyfarm071315 күн бұрын
Good morning Matt. It started raining here at about 11:30,so I imagine it has been raining by you for awhile now. Im really happy I got that field chiseled last night. Hopefully I can get the oats and new seeding in it pretty quick. I had to wait for lime to get spread otherwise it would be done already. I'm looking forward to more videos 😎👍
@burrridgefarms16 күн бұрын
Good deal 👍. About 3/4 of an inch so far, and the big storms missed us. Good luck, hopefully the weather will cooperate for ya 🍻🍻🍻
@hartungdairyfarm071315 күн бұрын
Nice looking cow, good feeling when you run cooler over
@user-fz6md1vg9z15 күн бұрын
Thanks. Too bad milk isn't worth more lol
@hartungdairyfarm071315 күн бұрын
Happy Sunday Matt. Good to see the old disk draw bar trick in action.
@farawayfarm252016 күн бұрын
Afternoon Will. Sucks when you get a little off and have to set it down and move the tractor 🤣🤣🍻🍻🍻🍻
@hartungdairyfarm071315 күн бұрын
Liked and subscribed! 🎉🎉🎉🐮🐮🐮🐮🐮
@badger113216 күн бұрын
Thanks
@hartungdairyfarm071315 күн бұрын
Dang, 2 videos and a short in a few days.lol. Good morning Matt ☕☕☕
@GosselinFarmsEdGosselin16 күн бұрын
Afternoon ed. I'm sure I'll go missing for the next 6 weeks again 🤷♂️🤣🤣🤣🍻🍻🍻🍻
@hartungdairyfarm071315 күн бұрын
@@hartungdairyfarm0713 lol.. probably, 🥃🥃🍻
@GosselinFarmsEdGosselin15 күн бұрын
great video
@bodiehot15 күн бұрын
Thanks!
@hartungdairyfarm071315 күн бұрын
Man yeah, seems like it's never ending!! I like that disc, what style and brand? Looks like a wild style offset, boy it sure worked good!! It does help with those duals I'm sure!! Thank you sir for bringing us along, look fwd to seeing the chopper maintenance as well😉😉😁😁👍👍🌽🌽🐂🐂🇺🇸🇺🇸🍻🍻🍻
@Pennies_on_the_dollar15 күн бұрын
Matt may correct me but I think that is an old Krause, I probably don't have the spelling correct. I was looking at an 18 foot bi fold one last fall. It seems like the staggered gangs allow for more aggressive settings. I got a 14 foot miller instead. And no it's not the same miller that made offset disks, I have experience with those too. Have a good one Nelson 👍
@burrridgefarms15 күн бұрын
@@burrridgefarms Thank you Adam!!!
@Pennies_on_the_dollar15 күн бұрын
Adam is right. That old disc does a very nice job. Thanks Nelson 👍🍻🍻🍻🍻
@hartungdairyfarm071315 күн бұрын
@@hartungdairyfarm0713 😁😁😁👍👍
@Pennies_on_the_dollar15 күн бұрын
Thanks for another video
@jaycool780515 күн бұрын
Thanks for watching
@hartungdairyfarm071315 күн бұрын
Not necessarily a bad feeling going to every day pick up, however I would imagine there is an additional trucking fee added in for that. Hope field work goes well for ya.
@davidwhittredge-rr7ti11 күн бұрын
Yep, there's a fee for everything lol. Rain has been holding us up a bit, but I'm not going to complain about moisture. Thanks
@hartungdairyfarm071311 күн бұрын
At first I thought this was Trinity dairy channel because the 766 threw me off lol 🚜🐄🐄🐄🐄🐮🐮🐮those band duals didn't look like they were very fun to put on, you'd probably prefer the hubs, I've been told that they are easier to put on
@mattutke470416 күн бұрын
Don't see too many of those white cabs on KZhead lol. Those duals aren't too bad to put on, axel mounts are a little nicer because you can zip the lugs in with an impact wrench. Thanks for watching
@hartungdairyfarm071315 күн бұрын
What brand of disk is that. I ask cause my family worked for miller manufacturing til they closed in the 80s farm crisis story goes the company founder invented the offset disk. Thanks for sharing bud
@koryleague883315 күн бұрын
This is a Krause disc. That's interesting. Thanks for watching
@hartungdairyfarm071315 күн бұрын
How many are currently milking? We are finally getting some rain here in Nebraska. Had nasty weather here on Friday
@kevinanderson8916 күн бұрын
I'm usually milking 80 or just a little less. We didn't get any to the severe weather they were talking about, just about a half inch of rain
@hartungdairyfarm071315 күн бұрын
How many cows do you have? Do you have someone helping with milking them?
@joeshmo539916 күн бұрын
I milk around 80, and do all the milking myself. My wife scrapes the shed and feeds calves
@hartungdairyfarm071315 күн бұрын
Nic looking 966 any issues with it 👍
@dlzastera15 күн бұрын
Thanks. It's been a real good tractor, I do need to rebuild the front end at some point
@hartungdairyfarm071315 күн бұрын
Clamp on duals suck I made a socket for mine took a deep impact socket cut it in half and welded each end to a piece of pipe way easier 🍻🍻🍻🍻🇺🇸🇺🇸
@keithrobinson133113 күн бұрын
I'll have to do that, wrenching those on sucks👍🍻🍻🍻🍻
@hartungdairyfarm071313 күн бұрын
Where are you located?
@ryanpockat884615 күн бұрын
Sw Wisconsin
@hartungdairyfarm071315 күн бұрын
I'm in Marion Wisconsin so probably not just to far
Never seems to fail, cattle 💩 and chains. I always liked the look of the 966 with duals.
Always 🤦♂️🤣🤣. I do wish it had 38's on the back, but I guess 34's are cheaper to replace 🤣🤣🍻🍻🍻
I don't know about you.....alls i seem to get done are chores....i need the younger version of me around here..😂
It would be nice, but mamma would probably throw the younger me out of the house these days 🤣🤣🤣🍻🍻🍻🍻
Good morning Matt. It started raining here at about 11:30,so I imagine it has been raining by you for awhile now. Im really happy I got that field chiseled last night. Hopefully I can get the oats and new seeding in it pretty quick. I had to wait for lime to get spread otherwise it would be done already. I'm looking forward to more videos 😎👍
Good deal 👍. About 3/4 of an inch so far, and the big storms missed us. Good luck, hopefully the weather will cooperate for ya 🍻🍻🍻
Nice looking cow, good feeling when you run cooler over
Thanks. Too bad milk isn't worth more lol
Happy Sunday Matt. Good to see the old disk draw bar trick in action.
Afternoon Will. Sucks when you get a little off and have to set it down and move the tractor 🤣🤣🍻🍻🍻🍻
Liked and subscribed! 🎉🎉🎉🐮🐮🐮🐮🐮
Thanks
Dang, 2 videos and a short in a few days.lol. Good morning Matt ☕☕☕
Afternoon ed. I'm sure I'll go missing for the next 6 weeks again 🤷♂️🤣🤣🤣🍻🍻🍻🍻
@@hartungdairyfarm0713 lol.. probably, 🥃🥃🍻
great video
Thanks!
Man yeah, seems like it's never ending!! I like that disc, what style and brand? Looks like a wild style offset, boy it sure worked good!! It does help with those duals I'm sure!! Thank you sir for bringing us along, look fwd to seeing the chopper maintenance as well😉😉😁😁👍👍🌽🌽🐂🐂🇺🇸🇺🇸🍻🍻🍻
Matt may correct me but I think that is an old Krause, I probably don't have the spelling correct. I was looking at an 18 foot bi fold one last fall. It seems like the staggered gangs allow for more aggressive settings. I got a 14 foot miller instead. And no it's not the same miller that made offset disks, I have experience with those too. Have a good one Nelson 👍
@@burrridgefarms Thank you Adam!!!
Adam is right. That old disc does a very nice job. Thanks Nelson 👍🍻🍻🍻🍻
@@hartungdairyfarm0713 😁😁😁👍👍
Thanks for another video
Thanks for watching
Not necessarily a bad feeling going to every day pick up, however I would imagine there is an additional trucking fee added in for that. Hope field work goes well for ya.
Yep, there's a fee for everything lol. Rain has been holding us up a bit, but I'm not going to complain about moisture. Thanks
At first I thought this was Trinity dairy channel because the 766 threw me off lol 🚜🐄🐄🐄🐄🐮🐮🐮those band duals didn't look like they were very fun to put on, you'd probably prefer the hubs, I've been told that they are easier to put on
Don't see too many of those white cabs on KZhead lol. Those duals aren't too bad to put on, axel mounts are a little nicer because you can zip the lugs in with an impact wrench. Thanks for watching
What brand of disk is that. I ask cause my family worked for miller manufacturing til they closed in the 80s farm crisis story goes the company founder invented the offset disk. Thanks for sharing bud
This is a Krause disc. That's interesting. Thanks for watching
How many are currently milking? We are finally getting some rain here in Nebraska. Had nasty weather here on Friday
I'm usually milking 80 or just a little less. We didn't get any to the severe weather they were talking about, just about a half inch of rain
How many cows do you have? Do you have someone helping with milking them?
I milk around 80, and do all the milking myself. My wife scrapes the shed and feeds calves
Nic looking 966 any issues with it 👍
Thanks. It's been a real good tractor, I do need to rebuild the front end at some point
Clamp on duals suck I made a socket for mine took a deep impact socket cut it in half and welded each end to a piece of pipe way easier 🍻🍻🍻🍻🇺🇸🇺🇸
I'll have to do that, wrenching those on sucks👍🍻🍻🍻🍻
Where are you located?
Sw Wisconsin
I'm in Marion Wisconsin so probably not just to far